PERIODICAL SERVICES AND REPAIRS TO CHAJJA AND FACIA TO MD ACCN AT JALIPA MIL STN UNDER GE A BARMER

Amount

Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

Taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water including necessary scaffolding complete all as specified and directed.

M & L for Rendering 15mm thick cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement.

M&L for Ready mix plaster in cement mortar ( 1:6) , 15mm thick on other than fair faces of brick work or stone surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Ready mix plaster in cement mortar (1:4) , 15mm thick mixed with water proofing compound,on other than fair faces of brick work or stone surfaces , finished even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid separately)

M & L for Ready mix plaster ,5 mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement, complete, all as specified and directed.

M & L for rough cast plaster over 10mm thick cement plaster in CM 1:4 on stone/ brick masonary wall surfaces complete all as specified and directed.

Supply only liquid water proofing compound ( For external plaster surfaces) complete all as specified and directed

M&L for two coats of 100 % premium exterior acrylic emulsion paint of required shade,Make Apex Ultima of Asian Paint or long life of berger or Excel Everlast 12 of Nerolac, over a coat of primer and 2 to 3mm average putty for smooth finish as directed by engr in charge having VOC less then 50gm/litre and UV resisitance as per IS 15489:2004,Alkali & fungal resisitance, dirt resisitance exterior paint of required shade ( Company Depot tinted) with silicon additives @1.00 litre/ 10 sqm, including necessary scaffolding including Complete removal of existing treatment of any type/description such as cement base paint,external emulsion etc from external surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilivers/balcony etc with mechanical means/grinder including necessary scaffolding complete all as specified and directed.complete all as specified and as directed. NOTE:-Primer will be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

M&L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint @ 5sq.m/kg/1 coat by using following brands of cement base paint including necessary scaffolding including Complete removal of existing treatment of any type/description such as cement base paint,external emulsion etc from external surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilivers/balcony etc with mechanical means/grinder including necessary scaffolding complete all as specified and directed. complete all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints) Note for above items of external finishing :- the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.

M&L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying one coat of cement base paint @ 5sq.m/kg/1 coat by using following brands of cement base paint complete including necessary scaffolding all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints) Note for above items of external finishing :- the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.

M&L for preparation of new plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint @ 5sq.m/kg/1 coat over a one coat of of external primer by using following brands of cement base paint complete all as specified & as directed by engr-in-charge. Make of cement paint:- Snowcem Plus (Snowcem paints)

Writing letters or figures ( Block, Roman, Italic or indian ) not exceeding 30cm high complete all as specified and as directed by engr-in-charge.

Writing stops,commas,short lines, dashes,hyphens, brackets complete all as specified and as directed by engr-in-charge.

Complete removal of existing treatment of any type/description such as internal emulsion etc from internal surfaces of walls with mechanical means/grinder and Applying two coats of interior emulsion paint (light shade) @10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat and 2 to 3 mm putty as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer: Asian / Berger / Nerolac Best Quality]. [ Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH). NOTE:-Primer will be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed. (a) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c) Allow 6-8 hrs time to dry the putty surface.

Complete removal of existing treatment of any type/description such as oil bound distemper etc from internal surfaces of walls with mechanical means/grinder and M&L for Applying two coat of oil bond distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 1mm )thick including necessary scaffolding arrangement as required at site all as specified and directed. NOTE:- Procedure for wall care putty same as description mentioned in Item no. 15 above

M&L for preparation of old decorated surfaces of walls, stopping nails holes and applying one coat of oil bound distemper including necessary scaffolding arrangement as required at site all as specified and directed.

M&L for preparation of new plastered ceiling surfaces and applying three coat of white wash on ceiling ovecomplete all as spd and directed.

M&L for preparation of new plastered wall surfaces and applying three coat of white wash on walls complete all as spd and directed.

M & L for preparing existing treated surfaces on walls including cornices and applying one coat of white wash on wall surface complete all as specified and directed.

M & L for preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash over ceiling surface complete all as specified and directed.

M&L for preparation of old painted surfaces of wood of any description not other wise described; over 10 Cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M &L for preparation of old painted surfaces of steel of any description and in any position over 10 CM width or girth; not otherwise described, and applying one coat of synthetic enamel paint , complete including necessary scaffolding arrangement as required at site all as specified and directed

M &L for preparation of old painted surfaces of steel of any description and in any position not exc 10 CM width or girth; not otherwise described, and applying two coat of synthetic enamel paint , complete including necessary scaffolding arrangement as required at site all as specified and directed

M & L for cutting and widening existing cracks not exc 1cm in girth to 'V' section in existing walls, Cleaning out, wetting,filling with crack filler and apply a coat of sure seal (Dr Fixit) as per manufactures instruction complete all as specified and directed.

M &L for preparation of old painted surfaces of bricks,concrete,asbestos,cement plaster surfaces of any description and in any position over 10 CM width or girth; not otherwise described, and applying one coat of synthetic enamel paint , complete including necessary scaffolding arrangement as required at site all as specified and directed

M&L for Chipping of 50mm average thickness unsound/weak concrete material from slabs, beams, columns, footings etc. and plaster with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts complete all as per direction of Engineer-In-Charge

M&L for Cleaning & applying rust remover on in two coats over rusted reinforcement surface of RCC members and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 2-3 sq. mtr/ltr not less than 50 microns dft to reinforcement surface as per manufacturer’s instructions including all machinery, tools tackles and clearing of debris. (Note : Entire Exposed Surface of RCC members after chipping shall be measured and paid.)

M&L for providing Micro concrete M-50 (Minimum grade) with CICO MICROCONCRETE at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine including proper props and structural steel support for any height ,if required etc all as specified and directed.Make: CICO MICROCONCRETE of CICO Technologies Ltd or equivalent in Fosroc/STP/BASF.

DEVARAM CONSTRUCTION COMPANY (BID ID -3401221)

m/s sai construction company,bijarar (BID ID -3401574)

RAIKA ENTERPRISES (BID ID -3409614)

ASHAPURA ENTERPRISES (BID ID -3401485)

S.K. INFRASTRUCTURE (BID ID -3409575)