Tender ID

DEFPROC

Active

Works

Civil Works

SPECIAL REPAIRS TO CDA RESIDENCE BUILDING NO P-22 TEYNAMPET UNDER GE CHENNAI

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

ge chennai | Chennai, Tamil Nadu

Amount: ₹13.9 LCloses: 14 Nov 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published24 Oct 2026
Submission Opens7 Nov 2026
Closes14 Nov 2026
Bid Opening16 Nov 2026

Tender Value

₹13.9 L

EMD Value

₹27,900

Closing Date

14 Nov 2026, 6:55 pm5d left

Tender Inviting Organisation

Name

GE Chennai

Address

GE Chennai 600 009

Work Description

SPECIAL REPAIRS TO CDA RESIDENCE BUILDING NO P-22 TEYNAMPET UNDER GE CHENNAI

Tender Information

Tender ID

2026_MES_795593_1

Reference Number

8995/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

120 days

Location

ge chennai

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredApplication for tender documents indicating the details of DD/ Bankers cheque (.pdf)

RequiredDemand draft for Rs.500 in favour of GE Chennai towards cost of tender documents (.pdf)

RequiredRenewed Enlistment letter for MES enlisted contractors and documents as per appendix A to NIT for ot (.pdf)

RequiredScanned Copy of provident fund code number of the firm (.pdf)

RequiredScanned Copy of GST registration number of the firm (.pdf)

Finance

RequiredBOQ (.xls)

RequiredComplete Set of Tender documents including amendments (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

ge chennai

EMD Fee Amount

₹27,900

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

24 Oct 2026

Published

24 Oct 2026

Bid Opening

16 Nov 2026

Download Starts

24 Oct 2026

Download Ends

14 Nov 2026

Submission Starts

7 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (71 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed.	6	Each	-	-
2	M&L for WPC frame size not less than 70X50mm size and weight not less than 0.8kg/m of any colour with all necessary fixtures and connectors complete all as specified and as directed	12	Rm	-	-
3	Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exceeding 1.5 sqm and not exceeding 4.00 Sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed	1	Each	-	-
4	S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.	0.02	Cum	-	-
5	Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.	4	Each Leaf	-	-
6	M&L WPC shutter of thickness not less than 25 mm thickness and area greater than 1.2 sqm of any colour with all necessary fixtures and connectors complete all as specified and as directed.	8	Sqm	-	-
7	S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed.	2.1	Sqm	-	-
8	M & L for Providing and fixing factory made uPVC white colour casement fixed ventilator (frame size not less than 55mm x 50mm) made of extruded profiles. Profiles of frames will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. including arrangement for fixing of glass louvers( thickness of glass not less than 4mm) of 10 to 15 cm width and spacing 10cm to 20cm centre to centre and length as per width of the ventilator including fixtures, fastners and any connectors all as specified and as directed	10	Sqm	-	-
9	M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed.	6	Sqm	-	-
10	S&F in repair aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed.	8	Sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.37 MB

Work Item Documents

BOQ_892343.xls

BOQ • 0.32 MB

Tender8995.pdf

Tender Documents • 0.93 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed.

Each

M&L for WPC frame size not less than 70X50mm size and weight not less than 0.8kg/m of any colour with all necessary fixtures and connectors complete all as specified and as directed

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exceeding 1.5 sqm and not exceeding 4.00 Sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed

Each

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

0.02

Cum

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Each Leaf

M&L WPC shutter of thickness not less than 25 mm thickness and area greater than 1.2 sqm of any colour with all necessary fixtures and connectors complete all as specified and as directed.

Sqm

S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed.

2.1

Sqm

M & L for Providing and fixing factory made uPVC white colour casement fixed ventilator (frame size not less than 55mm x 50mm) made of extruded profiles. Profiles of frames will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. including arrangement for fixing of glass louvers( thickness of glass not less than 4mm) of 10 to 15 cm width and spacing 10cm to 20cm centre to centre and length as per width of the ventilator including fixtures, fastners and any connectors all as specified and as directed

Sqm

M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed.

Sqm

S&F in repair aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed.

Sqm