CWEAFJ-24/2020-21 SPECIAL REPAIRS TO CERTAIN OTM BUILDINGS IN DOMESTIC AREA AT AIR FORCE STATION PATHANKOT

Amount

B/R Portion

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc all as specified.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in cement mortar 1:6, complete all as specified and directed.

All as per the description of Serial Item No '05' here-in-before but except bricks i.e. using serviceable bricks obtained from demolition, complete all as specified and directed.

Demolition of cement concrete (re-inforced) in any description and in any position not otherwise specially provided for complete all as specified .

RCC type B-1 1:2:4 using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and as directed.

Providing Precast cement concrete in repair, PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in louvres and jallies, 40mm thick (measured solid), including all mouldings, set in CM 1:4 complete all as specified and as directed.

TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

TMT bars 5mm dia and and over upto and including 10mm as in stirrups, spacers and binders, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:3 in Fascia or edging of Chajjas, Ceiling and Roof projections etc., including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement, complete all as specified and as directed.

Rendering dubbing coat average 15mm thick in cement mortar 1:4 over cement slurry coat @ 3 Kg/Sqm on damaged irregular surface of chajjas / roof projections / ceiling facia and similar work and making the surface even followed by 5mm thick rendering in cement mortar 1:3 finished even and smooth, making of drip course as required and applying two coats of weather proof emulsion paint after roughening surface of old concrete by picking, sweeping clean and washing with water all as specified. Note : The contractor shall make necessary arrangement for the scaffolding and saftey provisison and the cost of the same shall be deemed to be included in the rates quoted rates by the contractor and nothing extra shall be admissible on this account.

Preparation of surface of concrete of any description by chipping off Plaster / Concrete upto cover only for making better bonding in between old and new concrete including tappering all edges upto 25 to 50mm thickness, chipping off unsound weak concrete / cover of reinforcement over RCC member or as per site requirement by chieseling complete all as directed

Rust Remover cum passivator to remove rust from existing reinforcement and supply and applying a cement based polymer modified rebar corrosion protection system to existing reinforcement complete all as specified and as directed.

Epoxy Resin Concrete STP SHALI BOND Concrete or Shaliprime 2E providing, mixing and applying two component epoxy resin concrete bonding coat on prepared RCC surfaces as per manufacture specification including preparation of surface by chipping and thoroughly cleaning of surface complete all as specified and as directed.

Epoxy / Cementitious injection grouting drilling holes in the concrete surface using electric drill for fixing of NRV nozzles @ 30 cm c/c by using 12-14 mm dia drilled upto 150mm deep in the RCC structure placed and fixed chemical to be injected by using electric pump at pressure of up to 90 psi. injecting shali grout ei and shaligrout ip moisture incentive adhesive for numerous injection super low viscosity intended for penetration non shrink flowable polymerized liquid pressure through injection pump checking & sealing and removing of nozzles after injection method complete all as specified and as directed.

High Strength mortar Shalifix FRM or Microncrete as per site requirement with required fibremesh and shuttering where-ever required all as specied and as directed.

Supply only integral water proofing compound all as specified and as directed.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and fair without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.

Non-skid coloured glazed ceramic tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, fixed in repairs, complete all as specified and directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tiles, fixed in repairs, complete all as specified and directed.

18mm to 20mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4, fixed in repairs, complete all as specified and directed.

16mm to 18mm thick, machine cut Kota stone as in riser or steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and rounding off edges complete with mirror finish polishing, over and including 10mm thick screed bed or bedding layer of cement mortar 1:4, fixed in repairs, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 105mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge, complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge, complete all as specified and directed.

PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frames and in bed block for holdfast etc. similar work etc. complete all as specified and directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10Sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and as directed :- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window (b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf (c) Stainless Steel Tower bolt 150mm long - 02No per leaf

(d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf (e) Cleat 55mm Long of Hollow Square 15mm x 20mm x 63mm welded to Hinge 01 No per Leaf (f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete.

Mild steel framed works such as grills, framed guard bars, etc. and similar work conforming to Fe-410-O or Fe-310-O grade, including bending, cutting and welding as required, complete all as specified and as directed.

Factory made solid PVC Door Frame single rebated of size 60 x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws taking down with existing one complete all as specified and directed.

Factory made PVC Flush Door Shutter of 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2.0mm thick moulded prelam PVC sheet on the front face and 2mm thick panel colour PVC sheet on back face complete all as specified and directed

Factory made PVC Flush Door Shutter of 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2.0mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

Butt hinges, medium weight, Stainless Steel, 100mm size, complete all as specified and directed.

Stainless Steel, sliding door bolt with hasp, staple (bolt type) 300mm, and fixing clips of sheet and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Stainless Steel barrel tower bolt complete of size 200mm long complete all as specified and directed.

Stainless Steel handle complete of size 150mm long complete fixed in repairs all as specified.

300mm Mild steel spring for door, ordinary Rat Tail Rod pattern springs, including roller and roller plate complete fixed in repairs all as specified.

Stainless Steel Wire Cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

18mm thick UV board duly edge bonded with 0.8mm thick PVC taping fitting of shutters shall be fixed with autoclosing hydraulic hinges and modular handles, design and colour as approved by GE suitable for Kitchen Cabinet etc. complete all as specified and directed.

Kitchen Cabinet made of HDR board 18mm thick water proof with life time anti-termite warranty duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed.

Stainless Steel Continuous (Piano) hinges, width of flaps (when open) 20mm flap, bright finish or electro galvanished complete all as specified and directed. Note : All screws shall be self tapping chrome plated.

Aluminium door seal upto 1200mm length best quality complete all as specified and directed.

Drapery curtain rod metallic 25mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed.

Complete removal of the existing roof treatment, any type viz. tarfelt or membrane surface etc. including grubbing up of tree roots and removing the demolished material to a distance not exceeding 500 metres and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 20mm thick screed bed with cement mortar 1:4 over concrete surface. (b) Applying 2nd course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified prefabricated five layer polymeric membrane 3mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm end overlap. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm and blended with fine sand in dry condition @ 0.50Kg/Sqm dusted over the bitumen coat.

The membrane shall be laid using butane torch. The membrane shall be first laid upto the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering upto a distance of 300mm. In case the parapet height is less than 500mm, the membrane shall be terminated at the top of parapet. All rain water pipe openings shall be suitably sealed with APP membrane including disconnection and refixing in same position the existing Water Storage Tanks and all GI Pipes and fittings complete all as specified and directed. Notes : 1. Contractor shall be write "Name of Contractor and Date of Laying of Membrane" with paint on the wall after laying of membrane in all respect. 2. The rate includes for fillling of cracks in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed by Engineer-in-Charge.

Removing of vegetation / plantation and roots superfacial area not exceeding 2.0 Sqm each on the wall / roof / any position, of double storey building upto 6.0metres height including necessary scaffolding and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing and refixing of CI / GI pipe lines complete all as specified and as directed. Note : Brick work, plaster and CI / GI pipe lines shall be measured and paid separately.

Cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in mass concreting in Sunken Floor, complete all as specified and directed.

Steel water tubing medium grade galvanised of nominal bore dia 50mm, as in spout pipes in sunken floors complete all as specified and as directed.

Acrylic polymer modified cement base water proofing coating in two coat 1.0mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume complete all as specified and as directed. Make : Doctor fixit Pidifin 2k high performance 2 component flexible product of M/S Pidilite Industry Limited

Rotational moulded polyethylene Water Storage Tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including supply and fixing necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, brass valve 20mm high pressure with polythene float and fly nut etc. complete, fixed in repairs, all as specified and directed.

Cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Bib tap with wall flange cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop cock / Angle valve with adjustable wall flange CP cast copper alloy, fancy type, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.

Stop valve, long cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, fixed in repairs, complete all as specified and directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repairs, complete all as specified and directed.

Brass chromium plated shower rose, fancy type, 125mm with swivel joints and fixed to steel pipe or union, fixed in repairs, complete all as specified and directed.

Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous china wash hand basin, counter type size 550mm x 400mm, coloured, oval shape, flat back including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side and fitting in granite slab with proper moulding etc., complete all as specified and as directed.

Vitreous china Urinal, Half Stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed.

PVC connection 45cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minium weight 300 gms) all as specified and directed.

Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minium weight 190 gms) complete all as specified and directed.

Cast Iron soil waste and vent pipe, sand cast, ISI marked 100mm bore, in any length with or without ears with lead joints laid in floor/walls all as specified.

Cast Iron soil waste and vent pipe, sand cast, ISI marked 75mm bore, in any length with or without ears with lead joints laid in floor/walls all as specified.

Cast Iron bends (any radius) diminishing pieces or tapers 100mm dia (larger bore measured) all as specified and as directed.

Cast Iron bends (any radius) diminishing pieces or tapers 75mm dia (larger bore measured) all as specified and as directed.

Cast Iron Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia, all as specified.

Cast Iron Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm dia, all as specified.

Cast Iron Branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia, all as specified.

Cast Iron Branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm dia, all as specified.

Cast Iron vent cowl, 75mm bore, complete all as specified and as directed.

75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded crushed stone aggregate, fixed in repairs, all as specified and as directed.

Grating round 100mm size of PTMT (minium weight 25gms) all as specified and as directed.

Reinforced concrete pipes, bore of pipe 150mm class NP-2, laid & jointed complete with collars laid in trenches in concrete padding jointed in cement mortar 1:1 all as specified and directed.

Concrete bed to drain pipes of bore 150mm dia including packing under hunching against the sides of pipe after they are laid tested in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates complete all as specified and as directed.

PCC 1:2:4 type B-1 (using 20mm graded cruched stone aggregate) as in benching, coping etc including necessary form work all as specified and directed.

Preparation old plastered surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke, soot, mould, moss and efflorescent salts and treating oil and greasy spots, applying one coat of white wash, complete all as specified and directed.

Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorosent salts, trading oil and greasy spots and applying two coats of acrylic exterior emulsion paint minimum four colours as approved of any shade / colour in camouflage pattern over a coat of primer including preparation of surfaces as per manufacturers instructions complate all as specified and as directed.

Preparation of newly plastered surfaces and applying two coats of acrylic exterior emulsion paint minimum four colours as approved of any shade / colour in camouflage pattern over a coat of primer including preparation of surfaces as per manufacture instructions complete all as specified and as directed.

Complete removal of the existing treatment on walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm complete all as specified and as directed.

Preparation new plastered surfaces of wall and and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm complete all as specified and as directed.

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

E/M Portion

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit 20mm dia or more as per the site requirement including its fittings and fixtures such as ties, bends, elbows and junction boxes etc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including mild steel sunken box and inner and outer plate for mounting of Modular Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 100 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 100 here-in-before but for one 5 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 100 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

Modular switch 1 way 06 Amps, 1 module, complete all as specified and as directed.

Modular Socket, 06 Amps, 2/3 pin combined 2 module, complete all as specified and as directed.

Modular switch 1 way 16Amps, 1 module, complete all as specified and as directed.

Modular Socket 06 / 16Amps, 2/3 pin combined 2 module, complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Modular Bell push 5 Amps 230 Volts single pole complete all as specified and directed.

Bell, ding dong type AC 230 Volts single pole complete all as specified and directed

Modular Fan step regulator, 120W - 2 module including taking out the unserviceable, complete all as specified and as directed.

Tube light fitting box type suitable for and including LED 20 tube Rod 4' long with decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. Make : Havells 'E-Lite LED Curve' Cat Part No LHEXBXPNIN1W020 or equivalent in Philips / Wipro / Crompton / Syska

Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 / Crompton Cat Part No LBHE-10-CDL or equivalent in Philips / Wipro / Syska

Decorative wall light fitting suitable for and including 1x 09 Watts LED Lamp complete all as specified and as directed. Make : Havells Cat Part No LHDLO2160099 or equivalent in Philips / Wipro / Crompton / Syska

Spray painting to all exposed surfaces of Ceiling fans 1200/1400 mm sweep after cleaning all dust and scratching of old paint and painting with one coat of synthetic enameled paint and writing Numbering in capital letter complete, all as specified and as directed.

Exhaust fan, AC, SP 230/240V, 300mm sweep with louver, 1400 RPM complete with accessories complete provisioning of three core flexible copper cord of size 23/0.0076 of required length from connector to fan for connection, complete all as specified & directed.

Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA, complete all as specified and as directed.

Isolator SPN 40 Amp 10 KA, complete all as specified and as directed.

Sheet metal enclosures 415 volt with suitable rated bus bar double door TPN 4 way suitable for 60A MCCB TPN as incoming and 08 MCB SP as out going, mounting flush on wall and making good disturbed surfaces, fixed in repairs, complete all as specified and directed. Note : MCBs / MCCBs shall be measured and paid separately under the respective item.

MCCB TPN 60 Amp, 415Volts, having breaking capacity 16 KA, complete all as specrified and directed.

Bus bar chamber, factory fabricated, suitable for single Phase & neutral iron clad with 2 Nos of suitable strips complete fixed flush wall and making good the disturbed wall surfaces all as a required at site or as directed.

Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 6.0 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Three runs of 6.0 Sqmm wire and one run of PVC conduit shall be considered as one unit length.

Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 2.5 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 2.5 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Three runs of 2.5 Sqmm wire and one run of PVC conduit shall be considered as one unit length.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 2 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note : Punned thickness of sand will be measured and paid.

Brick well burnt locally available sub-class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified and as directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire up to 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

RAJESH SHARMA AND COMPANY

M/S SOHAL CONSTRUCTION CO

M/S G P MARWAHA

Vijay Kumar Contractor and Engineers

A R ENTERPRISES

kailu construction co

Bidder Name

kailu construction co

A R ENTERPRISES

INDERJIT SINGH

Vijay Kumar Contractor and Engineers

M/S G P MARWAHA

M/S SOHAL CONSTRUCTION CO

RAJESH SHARMA AND COMPANY