NIT No GE/ND-94/2025-26

B&R PORTION: Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters incl moulding at columns, windows and doors jambs complete all as specified and directed. Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

M&L for GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings complete all as specified and directed. by Engineer-in-charge. Make : Diamond Ceilings/Armstrong/Knauf Ceiling/Durlum

Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc including removal of debris out side MoD land (The work shall be carried out upto sixth storey height of buildings) complete all as specified and directed.

M&L for 15 mm thick ready mix plaster on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth) The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge

M&L for 5mm thick ready mix plaster READIPLAST RP of (Make Ultra tech) on any surfaces of brick/concrete includidng aapplication of bonding coat as Ultratech seal and Dry 5 Plus as per manufacturers instruction including finished even and smooth on soffits/ceiling surfaces (The work shall be carried out upto sixth storey height of buildings including all safety factor) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of weather proof exterior emulsion extra premium 100% acrylic emulsion as approved over a coat of primer complete all as specified and directed by Engr in charge.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge.

S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing (including necessary double steel scaffolding where required upto two storey bldg) complete all as specified and directed.

M&L for glazed ceremic tiles in vertical surface of size 450X300X7 mm on vertical Surfaces of wall on 10mm cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified and directed.

S&F powder coated aluminium sliding window shutters with frames (consisting of 02 Nos grazed shutters and 01 No gauge shutter) series D(25mm), 3 track sliding shutters, duly fitted with neoprene beading glass 5.5mm nominal thickness in gazed shutters, stainless steel wire mess of 0.254 mm nominal dia of wire and 0.95mm average width of aperture in gauzed shutter, powder coated ornamental aluminium grill 8mm dia, 75 x 97 mm aerature fixed with standard aluminium beading fixed in outer portion of the chowkhat etc complete all as specified and directed.

S&F ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets.

M&L for mirror polishing on old surface of kota stone including rubbing polishing & treating the surface complete all as specified and directed. Note: Carborandum stone of 0 unit shall be used in polishing operation.

E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed by Engr in charge.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed. Make:-RR/Polycab/Havells

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 10 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 10 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed. ake:-RR/Polycab/Havells

S&F in re

S&F in replacment earth continuity conductor or main earthing lead fixed to wall on batten or reccess or chases or burid in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing as required 25x4 mm galvanised iron strip complete all as specified and directed by Engr in charge.

S&F Rigid non-metallic PVC conduit 25mm bore exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

All as per item No 49.00 above but for size 40 mm bore complete all as specified and directed.

S&F PVC drain pipes threaded 32 mm dia and fith clamps at every 1 m along with bends and maintaining slope complete all as specified and directed by Engr in charge.

S&F in repair GI bracket for raceway mentioned in above item here-in-before of 100mm width, complete all as specified and directed.

S&F in repair coupler for raceway of 100 mm width complete all as specified and directed.

S&F in repair PVC duct cable tray/ wiring channels for top,bottom & sides and complete with top cover with rubber gasket of size 100x100mm complete for mounting and supporting the cable tray system,along with vertical bends, including taking down and re fixing and type of electric/signal cable, if require through wall/floor cutting and making good surface of disturbed area, complete all as specified and directed.