REPAIRS TO PERIMETER FENCING/BOUNDARY WALL NEAR 321 MED REGT AND 5 MED REGT AT AURANGABAD UNDER GE(S) AHMEDNAGAR

Amount

Demolition of brickwork masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc all as specified and as directed.

Demolition of precast concrete block masonry, built in cement mortar all as specified and as directed.

Demolition of cement concrete in foundation, coping, cills, plinth courses, string courses, bed plates, kerbs etc complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Dismantling old fencing wire mesh/chain link fencing, any description complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embeded portion in concrete/brick masonary and making good disturbed ground complete all as specified and directed.

Excavation in trenches, n exc. 1.5m wide and n.exc 1.5 m in depth, in soft/loose soil for foundation, laying pipes, for drains or manholes etc, n exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out including trimming sides and forming bottom surfaces to required level/slope etc complete all as specified and as directed.

Returning filling in (soil), including spreading, levelling watering & well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated soil to distance exc 250 m and n exc 500 m, depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Excavation in post holes in any type of soil, each post hole not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to distance not exceeding 50 m and making good surface all as specified and as directed.

M&L for PCC 1:4:8, type D2, using 40 mm graded stone aggreagtes as in foundation filling and mass concrete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregates) as in coping, cills, plinth courses, string courses, bed plates, kerbs etc complete all as specified and directed.

M&L in repairs, for pre-cast cement concrete jalli, 35 mm thick (measured solid) in pre-cast cement concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates, including all mouldings, set in cement mortar 1:4 complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete for fixing post or struts etc. complete all as specified and as directed.

M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid block of PCC (1:5:8), exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

S&F mild steel angle/flat iron as in fencing posts/struts for securing barbed/chain link fencing of any description including drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel round bars as line bars for fixing chain link fencing, conforming to FE 410 W (Gde-E-250) quality or FE 290 (Gde -E-165) complete all as specified and directed.

S&F mild steel screw bolt (machine made) of 10mm dia, 65mm long, with washers and nuts, one end screwed fixed to posts complete all as specified and directed.

S&F mild steel bolt, machine made, 12 mm dia of shank with hexagonal or square head one end and screwed the other or screwed both end, each screwed end to be fitted with, washers and one hexagonal or square nut, not exceeding 15 cm long complete all as specified and as directed.

Supply only chain link fencing net, mild steel galvanised, made out of GI wire of 8 to 10 mm gauge, aperature not exceeding 65 mm, weight not less than 3.5 kg/sqm all as specified and as directed. Note : Payment shall be allowed after ascertaining weight of chain link as per actual at site through BOO as ordered by GE.

Fixing only chain link fencing wire mesh, any type including securing bolts etc. and fixed complete all as specified & as directed.

S&F in repairs, galvanized, 2 strand, steel barbed wire, 2.24 mm dia, barbed with 2 mm dia barbs, at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces, finished even & fair complete all as specified and as directed.

M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over one coat of alkali resistant primer all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying two coat of cement base paint all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M/s.M G Kulkarni

D V Engineers and Contractors Pvt Ltd

HG PATHAN CONSTRUCTION COMPANY

M/s S.R lahoti

sonu enterprises