RENOVATION OF BUILDING OF SUB DIVISIONAL SOIL CONSERVATION OFFICE, TALWANDI SABO

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10ltr PVC flushing cistern ISI marked , PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge

One Way 6amp. Switch Flush Piano type

Single Pole 16/20amp. Switch with indicator Flush Piano type

5pin 6amp. Wall Socket Flush Piano type

Size 450 mm*300 mm*150 mm

Step type Fan Regulator Flush Piano type (Switch size)

Submersible pump for water distribution complete set including accessories

Bakelite Batten Holder (Large size)

Providing & fixing in position on terrace (at all floor levels ) HDPE tank cover of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position GI Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.

Providing and fixing in position PVC flexible tube connection of approved make(to the approval of Engineer in charge) complete in all respect- PVC tube connection of size 15 mm*375mm with PTMT nut

Providing and fixing in position SS grating with frame of approved make to the approval of engineer in charge complete in all respects

Providing and fixing in position CP Brass Extension piece 25 mm long to 100 mm long of approved make to the approval of engineer in charge under various fixtures complete in all respects-C.P Brass extension piece,25 mm long to 50 mm long

Providing and fixing in position Stop cock/angle valve of approved make to the approval of engineer in charge under various fixtures complete in all respects-C.P Brass 15 mm concealed stop cock with flange

Providing and fixing in position Stop cock/angle valve of approved make to the approval of engineer in charge under various fixtures complete in all respects-PTMT 15 mm angle valve

Providing and fixing and jointing brass ball valves screwed with SS/Brass ball and spindle and teflon seats,on GI pipe lines including all carriages complete-25 mm i/d brass ball valves

Providing and fixing and jointing GI union couplings of approved make with approval of EIC as per IS 1879 in GI pipelines complete in all respect-25 mm i/d GI union

Providing and fixing jet spray with 2'6" long PVC pipe-with PTMT nut

Providing and fixing plastic hygenic seat cover with lid complete-plastic seat cover premium star white/pastel/special colour

Providing and fixing in position C.I.bib cock as per IS:210 with SS spindle of approved make to the approval of EIC complete in respect-25mm i/d

Providing and fixing in position SS sinks of approved make to the approval of EIC 1mm thick,grade-304(18/8) with waste couplings complete in respect-sink with drain board overall size 1070*464mm bowl size 430*355*200mm and waste coupling

Concealed in wall:Provinding and fixing CPVC pipes as per IS 15778 ISI marked with prior approval of EIC having thermal stability for hot and cold water supply include all CPVC plain and brass threaded fittings i/c fixing the pipes with clamps at 1.00 meter spacing including jointing of pipes and fittings with one step CPVC solvent cement and testing of pipes complete as per direction of EIC

Description

SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame includingfixing & connections and petty material etc.,:-

One Way 6amp. Switch Flush Piano type

Single Pole 16/20amp. Switch with indicator Flush Piano type

5pin 6amp. Wall Socket Flush Piano type

16amp. Universal Wall Socket Flush Piano type

Step type Fan Regulator Flush Piano type (Switch size)

Ceiling Rose (Flush Piano Type)

Modular Motor Starter 25 Amp (Two Module)

Bakelite Batten Holder (Large size)

16/20amp. One Way Modular Switch with Indicator (One Module) (For 5 Ac Points )

25amp. Universal Modular Shuttered Socket (two Module)

Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-Modular Cover Frame Six Module

Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.:- Plastic Surface Box for Modular Accessories Six Module

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Erection Of Fans :

Supply & erection of PVC conduit Pipes (ISI marked) as per IS9537:Part III & HDPE pipes (ISI marked) as per IS :4984:1995 for wiring purposes including bends , junction boxes, steel hooks , M.S saddle clamps and other petty materials etc ., as per PWD General Specifications :-

Heavy Gauge PVC Conduit Pipe 25 mm dia. (On Surface)

Medium Gauge PVC Conduit Pipe 25 mm dia. (On Surface)

Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications :-

Porcelain Fuse Unit 63Amp., 240volts

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C)

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounti............;- TP&N Vertical Double Door distribution Board 12 way each

Supply and erection of sheet metal Iron Clad Changeover Switch on existing surface with G.I. bolts & nuts/rag bolts and nuts etc., according to the size of holes in the body of the switch including connections with suitable size of thimbles and bonding to the existing earth as per PWD General Specifications:-

IC Four Pole Changeover Switch 63amp., 415volts

Supply of ceiling fan

Supply of Exhaust Fan

Supply of LED/Fluorescent light fixtures ( 30 watt )

Earthing earth rod 20 mm dia for providing earth connections upto line earth with GI wire 8 S.W.G (4mm dia.) . The rod shall be tapered at one end and flatted on the other end . The hole size 10 mm dia shall be drilled on the flatened side for facilitating connection with GI wire and thimble etc. The rod shall be erected in ground upto complete length vertically:

Dismantling concrete slab rcc

Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Plastering on walls 6 mm thick cement plaster 1:4

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth (For Tile Beam )

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete( 100kg/cum)

Supplying and fixing of GI sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.

Providing and fixing G.I. Sheet 0.80mm thick sliding shutters with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates at the junctions, hooks at top and 25mm dia pulleys at bottom and 40mmx40mmx25mm dia pulleys at bottom and 40mx40mmx6mm angle iron top and bottom guides including locking arrangement with handles etc. complete

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

for slab casting Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete( 80kg/cum)

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).

Tile terracing complete as per CSR with 2 coats of Bitumin

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Iron grated doors, including pintle hinges & arrangements (10 ' x 7' ) approx

Credit of old scrapped steel qty. as per item no. 2

Credit of dismantlled Bricks

Base course for item no. 15 for vitrified floor tile

DESCRIPTION

RENOVATION OF OFFICE BUILDING INCLUDING CONSTRUCTION OF BOUNDARY WALL AND MAIN GATE

ELECTRICITY INSTALLATION OF BUILDING

BATHROOM CONSTRUCTION AND SANITARY INSTALLATION

CARRIAGE OF MATERIALS

CONTINGENCY @5%