REPAIR/MAINT OF INDOOR ELECTRIFICATION, HIGH BAY LIGHTS MAIN WIRING POINT WIRING SWITCHES SOCKETS MCBs AND MCB DBs UG CABLE AT PARTAPUR AND TYAKSHI UNDER GE 873 EWS

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

S & F for One light /Exhaust fan/wall fan point controlled by one-way 5 Amps switch using 1.5 sq mm FRLSH copper conductor unsheathed multistranded copper conductor cable of 1.5 sqmm with proper colour code, copper cable (FRLSH) in new conduit concealed with suitable size. it including all conduit accessories such as bends, tees, junction boxes, elbows, etc. Wiring in concealed conduit or on surface/in channel fixed with GI saddle clamps duly screwed, as required. terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of steel sunken box/gang boxes and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each. It includes cutting of chases and making good the same with cement mortar and finishing of disturbed surfaces with plaster of Paris/putty/distemper/colour wash to match the existing surface. NOTE: Continuous earth wire should be provided at each point with 1.5 sqmm FRLSH copper conductor cable of 1100 V grade up to ceiling rose/light fitting.terminal box/Gang box with complete all as specified and directed by Engr-in-Charge. The quoted rate inclusive for the following :- (a) Hylam sheet for fittings of Switches/sockets (b) Proper colour coding is to be followed as per IS Specification. (c) where concealed wiring shall not be executed, surface with PVC casing caping shall be taken up after directions from Engr-in-Charge (d) In ceiling Portion surface conduit wiring shall be carried out.

All as per Srl item No-02 above but wiring in casing capping with suitable size for light point/ Exhaust fan and wall fan controlled by one switch, complete all as specified and directed. .

All as per Srl item No-02 above but wiring in ERW MS with suitable size for light point/ Exhaust fan and wall fan controlled by one switch, complete all as specified and directed. .

All as per Srl item No-02 above but for one 3 pin socket outlet 5 Amps on independent board, complete all as specified and directed.

All as per Srl item No-02 above but for one 3 pin socket outlet 5 Amps on same board, complete all as specified and directed.

All as per item No- 02 above but wiring with 2.5 Sq mm FRLSH multistranded copper cable for 15 amp switch socket combination on independent board and provision of 2.5 Sqmm, FRLSH insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

All as per item No-02 above but wiring with 4.0 Sq mm FRLSH mutistranded copper conductor cable for 15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F in replacement of Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked, complete all as specified and directed.

S&F in replacement of Polycarbonate socket outlet 2-in-1, 5 Amps, 240 volts, flush type, complete all as specified and directed.