REPAIR TO FENCING COMPOUND WALL PATH AND DRAIN AREA OF SDH (AOR AGE BR I) UNDER AGE BR II OF GE (WEST) FEROZEPUR CANTT.

Amount

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded ,dry and pointed etc. complete all as specified and directed.

M&L 75 mm thik cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub floors, sub bases,floors and paving etc. complete all as specified and directed.

M&L providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. MAKES OF PAVER BLOCKS: SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPLEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW,SVRCC

All as per Srl Item No 4 here-in-before but old serviciable interlocking tiles obtianed from Srl item No 2 here-in-before complete all as specified and directed.

M&L providing cement concrete 1:2:4, type B1 (using 20mm graded aggregate) as copings, kneelers, apex stones, bed plates, kerbs, edge of paver block , water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed

M&L precast cement concrete solid block as in kerb stone 1:2:4, type B1 (using 20 mm graded aggregate) exceeding 10 cm width and set in cement mortar 1:4 complete all as specified and directed.

M&L preparation of new brick,stone,concrete or plaster surafces of any description not otherwise described , over 10 cm width or girth , applyinng two coats of synthetic enamel paint of approved shade complete all as specified and directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 10 here-in-before but using old bricks retrieved from demolition under item 9 here-in-before including cleaning and removal of mortar from old bricks complete in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L preparing newly plastered surface and applying two coats of cement base paint over a coat of primer on wall surfaces complete all as directed.

M&L preparation of newly plastered surface of wall and applying three coats of white wash over walls complete all as specified and directed.

M&L broken glass coping on top of wall in cement mortar1:3 all as specifiedand directed.

M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 500gm/ litre and UV resirtance as per IS 15489.2004, Alkali & fungal resistance, dirt resistance extrior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre / 10sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm over new surfaces complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum, getting out, returning, filling in and raming earth or broken , in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

M&L posts and struts for fencing and other steel section including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F galvanised 2 strand barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails. Straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L preparation of new steel surfaces of any description and in any position over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L painting to old steel surfaces of any description, over 10cm width or girth in one coat with synthetic enamel paint including preparation of surfaces complete all as specified and directed.

M&L reinforced cement concrete for nominal mix type 1:2:4, B-1 ( using 20mm graded stone aggregate) as in plinth course, plinth band and similar work including necessary form complete as as specified and directed.

M&L mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming complete all as specified and directed.

M&L plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc including provn of binding wire complete all as specified and directed.

Supply only chain link MS galvanated fencing any size fixed to any type complete all as specified and directed.

M&L providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4, type B-1(using 20 mm graded stone aggregate) and setting in cement mortar 1:6 complete all as specified and directed.

M&L providing 40 mm thick pre-cast cement concrete louvers or RCC Jali including posts made out of cement concrete 1:2:4. type B-0 (using 12.5 mm graded stone aggregate) and set in cement mortar 1:4 including all mouldings and dismentling etc. complete all as specified and directed.

M&L preparing old decorated surfaces of plastered or unplastered including chajjas, cornices, pilaster and projection etc and applying one coat of white wash on walls complete all as specified and directed.

Vee Vee Enterprises (BID ID -3369251)

M/s Kissan Engineering Works (BID ID -3369582)

Karan Engineers (BID ID -3368323)

M/S Yashpaul Gulati (BID ID -3369312)

R.S.ENTERPRISES (BID ID -3366782)

M/s Surjit Singh and bros (BID ID -3370161)

M/s Bansi Lal (BID ID -3366279)