Providing galvalmue sheet ,Shed and Flooring at Goundampalayam Hospital In ward no 33 of West Zone

Earth work excavation in all soils and Sub Soils with initial lead and lift including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Cement concrete 1:4:8 mix ( One Cement, Four Sand , Eight Aggregate)using 40mm size HBG metal from approved quarry including mixing, laying, compacting, curing and all labour charges Complying with Standard Specification etc. complete

Plain Cement Concrete 1:2:4, one part of cement, one and two parts of sand , four parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building.

Flyash Brick work in cement morter 1:5 mix (One Cement, Five Sand) using 2nd Class Ground moulded chamber burnt bricks from approved chamber with standard size (230 x 110 x 70 mm ) and quality as per the Direction of the departmental officers etc., Complete.

Plastering on Wall surfaces using cement mortar 1:5 (One part of cement, five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation

Supplying and fixing of MS truss and Purling MS angle for frame, 25x25x5mm for shutters alround, at center and for diagonals for stiffeners and 3mm MS gusset plates at the jnctions and corners and using 18 gauge MS plate for shutters with necessary hinges, tower bolt and locking arrangements complete including applying a priming coat of approved steel primer.

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental

Painting with Enamel paint of approved colour and quality over New iron work for doors, windows, grills, weldmesh, screen etc., as per the direction of the departmental ooficers Etc., Complete.

Flooring with Ellis pattern using 6mm chips (No sand to be used) including all other charges etc., complete

Painting with Terracotta Paint two coats in approved colour and quality including scrapping and POP putty work whereas it necessary etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil)

Wiring with 2x4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150mm x100mm x113mm TWswitchbox with 3mm thick hylem sheet for 15A 3pin non inter locking wall socket with 15A flush types with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.(SD 44)

Supply and fixing of single box type 4"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube (SD 87)

Supplying and fixing of 1200mm(48")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16") (SD 106)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B)with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification

Supplying and fixing of 1500 mm RCc Circular ring of 50 mm wall thick including all labour charges and transportation to site and all other fixing charges etc comple as per direction of the departmental officer

Supplying and fixing of 1500 mm dia RCc Circular Slab of 100 mm thick including all labour charges and transportation to site and all other fixing charges etc comple as per direction of the departmental officer