REPAIRS TO JOINERY FLOORING INTERNAL WATER SUPPLY STORM WATER DRAIN COMPOUND WALL AND HARD STANDING IN CERTAIN BUILDING AT ARMY AREA COIMBATORE AND MADUKKARAI UNDER GE WELLINGTON

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm each all as specified and directed.

Pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Pressed steel frames for doors with one or more rebates with necessary fixing lugs, hinges, lock strike plate, etc., complete, size of frame 105 x 60mm, all as specified and directed.

2nd class Hard wood 35 mm thick Glazed and skeleton shutters, open rebated prepared to receive glass/ gauze etc. edges of framing, divided in to squares with plain chamfered or rounded, fitted with cut, mitred beads for securing glass/ gauze all as specified and directed Note: Glazing and gauze will be measured and paid separately.

Factory made 30mm thick PVC moulded Panelled door shutter with 2 or 4 raised panel comprising of wooden frame and filler material with Pine / hard wood tubular board and Rigid PVC face with 0.50mm thick on both face of approved make all as specified and directed. Make: Durian or equivalent make approved by GE.

Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (stile) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded with glazing bars all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle complete with out glazing bars dovetailed or welded as fly proof shutters all as specified and directed.

Mild steel framed work such as grill / guard bars including fixing on steel window frame all as specified and directed.

Plain cement concrete 1:3:6 Type C0 (using 12.50 mm graded stone aggregate) as in filling hollow of pressed steel frame all as specified and directed.

PCC 1:2:4, type B1, using 20mm graded stone aggregate as in bed block for fixing holdfasts and coping/ benching including necessary use and waste of form work complete all as specified and directed.

MS Butt hinges medium weight cold rolled 100mm long all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 100mm size all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section 150mm length all as specified and directed.

Extruded aluminium alloy handles fabricated type 150 mm size, anodized all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140mm all as specified and directed.

Single action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel / wooden joinery all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in repairs to steel / wooden Joinery all as specified and directed.

Ground or obscured or frosted on one side, sheet glass 3 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane all as specified and directed.

Sheet glass 4.0mm thickness ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane all as specified and directed.

Fancy type Steel PVC Coated, drapery rod of size 20-25mm dia, including fixing of Steel powder coated fancy brackets and end stops 2 Nos in each opening etc complete all as specified and directed.

Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

12mm thick prelaminated termite resistant water proofing plywood interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, fixed in repairs all as specified and directed.

18mm thick prelaminated termite resistant water proofing plywood interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, fixed in repairs all as specified and directed.

Taking up or down steel / PVC tubing and connections, including cleaning etc bore of pipe upto 15 mm, all as specified and directed.

15mm bore unplasticised PVC pipes including fittings of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Demolition of cement concrete in ground floors (including tiles / floor finishes) and pavings not exceeding 15cm thickness (below or above ground level) all as specified and directed.

50mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection / path, laid and finished in bays not exceeding 3m c/c and filling the joints with mastic bitumen complete all as specified and directed.

Dismantling of Wrought Iron or Mild steel work of any description not otherwise provided for complete all as specified and directed.

Rolled Mild Steel structural work as in post, purlins, rafters, truss etc. complete conforming to Fe290 (Gde E-165) all as specified and directed.

Mild steel Plates (plain or chequered), channels, square cut or notched (Ordinary and counter sunk) forming holes, without any attachments all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:6 on concrete or brick surfaces, finished even and smooth without using extra cement all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coats of white wash all as specified and directed.

Applying two coats of oil bound distemper on surfaces of walls over two coats of wall care putty and a coat of priming paint including removal of existing treatment on old wall surfaces all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick/ stone wall or concrete surfaces as backing coat all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc built in any type of cement mortar all as specified and directed.

Non skid coloured joint free ceramic tile of size 600 x 600x 8mm to 10mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

25mm thick plain cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate as in sub floor, sub bases, floors and pavings etc complete all as specified and directed.

Screed bed or bedding layer of cement mortar (1:6) 10mm thick for laying floor finishes all as specified and directed.

Non skid coloured ceramic tile of size 600 x 600x 8mm to 10mm thick in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Glazed ceramic tiles 300x250x 6 to 7mm thick, coloured, in vertical surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile all as specified and directed.

Non - skid Ceramic tiles, coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as specified and as directed.

Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed.

Prelaminated particle board, 9mm thick interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

Plain sheet glass 4.0mm thick ordinary quality and glazing with oil putty in square exceeding 0.5 Sq.m in each pane complete all as specified and directed.

Door closer aluminium (extruded section) body hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.

Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed all as specified and as directed.

Demolition of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as specified and directed.

False ceiling using GI snap grid system with roll-formed out of hot-dip galvanised steel capping (powder coated), main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm and thickness not less than 1 mm, members suspended with Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long , with 4mm thick designer ceiling board of any texture (Lake & hill, Oceanic, cascade or Electra) as approved by GE, all as per Everest Ceiling grid system "Regular T-2430" or its equivalent make of "Ramco/ Charminar/ Armstrong" all as specified and directed. Note: Suspenders of GI wire 4mm dia shall be provided at 1200mm centre to centre alongwith telescopic adjustable fastening system (nut & bolt) of minimum 6mm dia.

Screed bed or bedding layer 10mm thick for laying floor finishes in CM 1:3 all as specified and as directed.

Machine pressed PCC tiles (ISI marked) of size 250 x 250 x 22mm thick laid over 20mm thick screed in CM (1:4) mixed with WPC jointed and pointed with WPC as per manufacturer instructions all as specified and as directed.

3mm thick APP pre-fabricated membrane with non woven polyester matt central core of 160 gsm (min) impregnated and coated on both sides with layer of APP modified bitumen and finished with micro-perforated heat fusible polythene film on both surfaces over 0.3 ltrs/Sqm bituminous primer confrming to IS-3384. The weight of APP membrane shall not be less than 3.6 KG/Sqm and laid over primed surface by using LPG/Butane torch and apply uniform preserve with roller. The overlap of membrane shall be 100mm on sides and 150mm on end laps. Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

Plain Cement concrete in surface channels and drains type C2 1:3:6 using 40mm graded aggregate all as specified and directed.

Pre-cast cement concrete block masonry with solid blocks of cement concrete type C1 1;3:6 using 20 mm graded stone aggregate, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Rendering 15mm thick on fair face of brick wall / concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Precast cement concrete, type B1, 1:2:4 using 20mm graded stone aggregate, set in cement mortar 1:4 as in cover slabs all as specified and directed. Note: Reinforcement will be measured and paid seperately.

100mm thick hard core using broken stone, broken to gauge not exceeding 63mm all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in sub base all as specified and directed.

Screed bed or bedding layer 20mm thick for laying floor finishes in cement mortar 1:4 all as specified and as directed.

Chequered / designer cement concrete tiles with grey cement and pigments, exceeding 200x 200mm not exceeding 450mm x 450mm 22-25mm thick set, jointed and pointed in neat cement slurry all as specified and directed.

Machine Pressed precast concrete interlocking paver block rubberised any shape and size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement and pigment including finishing the outer edge with cement concrete 1:2:4 using 20mm graded aggregate complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

UNIQUE INDIA CONSTRUCTIONS

m/s m valasubramanian

p.chinnasamy