PROVN OF RAIN WATER SHED,ROOF TREATMENT AND ALLIED WORKS OF OFFRS ACCN AT HARSHAN ENCLAVE AND SPECIAL REPAIRS TO DRAIN AT QUEENS GARDEN AND ADDN/ALTN TO TOILET BLOCK CDR OFFICE AT BLDG NO 3 ABNS OF CDO WING OF HQ JUNIOR LEADERS WING, THE INFANTRY SC

Amount

Excavation in post holes each n. exc. 0.5 Cum getting out in hard/dense soil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and as directed.

Materilal and labour for Plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate in foundations filling and mass concrete complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed . Note : Make of galvalume sheet : TATA BLUE SCOPE /LLOYD INDUSTRIES/JSW (COLOURON)

Supply and fix Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed .

Supply and fix Mild steel section for hold fasts, wind ties etc for roof including securing bolts and cutting tops to shape as directed and all necessary drilling ,bolting or rivetting etc confirming to Gde Fe 290 (Gde-E-165 ) complete all as specified and as directed.

Material and labour for Preparation of newsteel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Providing roof treatment with APP modified water proofing membrane with the following specifications complete all as specified and as directed.

(a)Removing existing roof/ chajja treatment of any description and thickness including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris outside the MOD premises.

(b)Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10 mm thick in CM 1:3 mixed with approved water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately

(c)Preparation of plastered surfaces by removing dust, dirt and applying oil bound bituminous primer at 0.3 litre per Sqm and providing APP modified water proofing membrane 4mm thick and weight not less than 4.5kg/ sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including minimum 10cm side/ over laps & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying applying a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm.

NOTE: APP modified water proofing membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given IS 16540-2017/ IS 16532-2017. The Contractor shall produce necessary test certificate of the manufacturer to GE before incorporation in the work. Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.

Material and labour for Plain cement concrete type B-1, 1:2:4 ( using20mm graded stone aggregate) 40mm thick as in levelling course including necessary form work complete all as specified and as directed.

Supply only water proofing compound.Make :Impermo/Cico/Roff

Material and labour for Precast cement concrete block masonry (1:3:6) type C1 ( using20mm graded stone aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc and removal of debris off the premises complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1: 6 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of alkali resistent primer over 1mm thick layer of wall care putty complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying .two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed.Note :Make of exterior emulsion paint : Asian Paints (Brand : APEX)

Material and labour for Complete removal of old plastered/unplasterd surfaces of wall and brooming down and appyling two coat of exterior emulsion paint over water based primer complete all as specified and as directed .Note :Make of exterior emulsion paint : : Asian Paints (Brand : APEX ULTIMA )

Surface excavation not exc 30 cm deep and averaging15 cm deep and getting out in Hard/ dense soil complete all as specified and as directed . .

Material and labour for Hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed .

Material and labour for PCC 1:4:8 type D2, (using 40 mm graded stone aggregate ) 50 mm thick as in sub base of flooring , finishing the surfaces even and fair without using extra cement including necessary form work complete all as specified and as directed.

Material and labour for Providing and laying 80 mm thick glossy finish on top Factory made chamfered edge cement concrete paver block of M-30 grade with approved colour ,design and pattern as in footpath ,parks,lawn ,drie ways or in light traffic parking areas etc of required strength ,thickness and size/shape ,made by table vibratory method using PU Mould .laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with fine sand and cutting of paver block as per required size and pattern,finishing and sweeping with extra sand complete all as specified and directed.

Material and labour for Rubber coated chequered cement concrete tiles 30cm x 30cmx 25mm thick, with grey cement and pigments, with glosy finish on top set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:6, etc. complete all as specified and directed.

Material and labour for PCC(1:2:4) type B1,(using 40mm graded stone aggregate) 100mm thick as in floor , finished even and smooth without using extra cement complete all as specified and as directed

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point in hard/Dense soil complete all as specified and as directed

Excavation in trenches not exc. 1.5metre deep and not exec 1.5 metre wide and getting out in hard /dense soil complete all as specified and as directed

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundatioin, mass concrete etc., complete all as specified and as directed.

Material and labour for PCC 1:2:4, type B1 using 20mm graded stone aggregate as in coping, bed blocks etc set in CM 1:4 including necessary steel form work and finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1: 4 on fair faces of brick work or concrte surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of chalk whitening complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm in Hard/Dense soil complete all as specified and as directed.

Supply and fix Rolled mild steel angle fixed independently without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts and cutting top to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 410-W (Gde E-250) quality-A complete all as specified and as directed.

Supply and fix Mild steel deformed round bars 10mm dia and over, cut to length bent to shape required, incuding cranking, bending spirally for hooping for columns , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed.Note :Make :SAIL/TATA/RINL

Supply and fix Mild steel screw bolts (machine made) of size n exc 5 cm long and 5 to 10mm dia shank bolt. with hexagonal or square head at one end and screwed to other or screwed both ends complete all as specified and as directed.

Supply and fix Mild steel flat for posts and struts in fencing including securing bolts in fencing and cutting tops to shape as directed ,drilling holes ,notching for wire etc ;flat iron fillets for securing wire mesh etc and similar work conforming to Fe -290 Gde E-165 complete all as specified and as directed.

.Demolition of cement concrete of any description and in any position and making good the disturbed surfaces including removal of debris off the premises complete all as specified and as directed .

Material and labour for Plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in drains, etc. including necessary steel form work/ moulds complete all as specified and as directed.

Material and labour for Precast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 12.5mm graded stone aggregate, set in CM 1:6 including demolition of existing unserviceable masonry of any description includingmaking good the distured surface and serviceable items taken as credit complete all as specified and as directed.

Material and labour for 15mm thick Rendering in cement mortar 1:4 on fair faces of brick work,PCC block walling or concrete surfaces in two layers finished even and smooth including taking down cement plaster on brick or stone walls built in cement mortar complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in foundation, filling including demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick and removal of debris off the premises complete all as specified and as directed .

Material and labour for extra for forming fair finished drain or channel of any inner girth in cement concrete using extra cement including forms moulds mitred/stopped end etc. complete all as specified and as directed

Material and labour for PCC type B1 1:2:4 (using20mm graded aggregate) as in base of surface channels and drains including necessary steel form work complete all as specifed and as directed.

Material and labour for PVC (SWR) drain pipe of 110 mm dia laid in trenches and jointed in CM 1:3 complete with collar inclding demolition and breaking up PCC and existing PVC drain pipes jointed in cement mortar and taking out of trenches and taken as credit .complete all as specifed and as directed.Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI Marked)

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) bed to drain pipes of 110mm dia of PVC pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris off the premises complete all as specified and as directed .

Material and labour for Cutting holes into or through stone walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required of superficial area ex 150 sq. cm but n exc 400 sq. cm complete all as specified and as directed .

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness including cover fillets and taken as credit complete all as specified and asdirected

Supply and fix 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grids of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying two coats of oil bound distemper on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces and taken as credit complete all as specified and as directed. .Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Complete removal of existing treatment on old plastered/unplasterd surfaces of wall with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of Oil Bound Distemper over a coat of primer and 1mm layer of wall care puty complete all as specified and as directed.

Material and labour for Plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25mm thick as in sub base of floor or levelling course including necessary steel form work complete all as specified and as directed.

Material and labour for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqmbut not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L coloured ceramic tiles of size 300x450x7 to 8mm on vertical surfaces such as dado, skirting etc set jointed and pointed in neat cement slurry and pointed in coloured cement to match the shade of tile over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc,complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Dismantling of stone slab or tiles of any description in floors, aprons etc., laid bedded and pointed in any mortar and taken as credit complete all as specified and as directed.

Material and labour for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/ wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for Machine cut granite slab in dado or skirting , 20mm thick bedded and jointed with grey cement slurry and pointed with white cement admixture of pigments to match the shade of granite stone incl grinding and polishing complete including backing coat in Cm 1:4, 15mm thick, even and smooth(without using extra lime or cement)., complete all as specified and as directed .

Material and labour for PCC 1:4:8 type D2, (using 40 mm graded stone aggregate ) 75 mm thick as in sub base/levelling course including necessary steel form work complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm eachand taken as credit complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area n. exc 1.5 Sqm each and taken as credit complete all as specified and as directed

Material and labour for Aluminium frame work as in doors, partitions ,windows and ventilators with one or more rebates using powder coated (Minimum thickness of Powder coating 50 micron) aluminium sections including provision of glazing clips, hinges, handles, joining cleats etc complete all as specified and as directed.

Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately. (iv) Make of Aluminium sections : Jindal Hindalco/Indal

Supply and fix MS butt hinges cold rolled medium weight 100mm sizecomplete all as specified and as directed.(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed.Note :Make :Crown/Classic/Adarsh

Material and labour for 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Material and labour for 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Description all as per item No 65 here in before but 20mm dia bore of pipe.

Material and labour for Cutting, chases ,pinning in and making good to facings where required for concealed water tubing in CM 1:3 cutting not exceeding 10 cm girth in stone concrete block or slab wall complete all as specified and as directed.

Supply and fix Unplasticised PVC pipes of 15mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Description all as per item No 68 here in before but 20mm dia bore of pipe.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern) white ,cascade model with Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe complete all as specified and as directed Note: MAKE ; HINDWARE/CERA/JOHNSON

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. Make: Jaguar /Hindware/Cera

Supply and fix Pedestal type wash basin Vitreous China of size 550 x 450mm ,white including brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed. Make: Cera or equivalent model in Hindware, Parry ware.

Supply and fix in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Note :Make: Jaguar /Hindware/Cera

Supply and fix in repairs brass chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed . Note : make :Cat No.ACN 1151N of JAQUAR or equivalent model in Johnson/ Cera

Supply and fix in repairs Soap dish, vitreous china , white of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) completeall as specified and as directed..Note :Make: Jaguar /Hindware/cERA

Supply and fix in repair 15 mm bore Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS

Supply and fix in repair Health faucet (ABS Body), mild steel chromium plated suitable for 15 mm dia pipe with1.25 metre long flexible tube and ABS wall hook complete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS

Supply and fix in repairs Tubular towel rod 600 mm , brass chromium plated, fixed to walls with plugs and chromium plated brass screws complete all as specified and as directed. Make: Cat No. CAN-CHR-1111N of Jaguar or equivalent model in JOHNSON/ ESS ESS.

Supply and fix in repairs 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc compete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS.

Material and labour for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet compete all as specified and as directed. Make: Finolex/Supreme/Price

Supply and fix Vitreous china urinals bowl type (back or corner wall type), of size 465mm x 355mm x 265mm white (minimum) with grating and union for discharge pipe complete including connections to flushing pipe and outgoing pipes , providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement completeall as specified and as directed. Make: Jaguar /Hindware/Cera

Supply and fix Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) for WHB completeall as specified and as directed. Note :Make : Prayag/M/S Shakthi Industries

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches.incluling old unserviceable PVC pipe of any description and taken as credit complete all as specified and as directed . .Note : Make : Finolex/Supreme/Prince

Demolition and breaking up PVC/AC drain pipes upto 75/100mm dia set in Cement mortar including removal of debris off the premises complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed . .Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. .Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed..Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) vent cowl .Note : Make : Finolex/Supreme/Prince

Dismantling water tank of capacity exc 500litre and n exc 1000 litre and of any description , in any position and taken as credit complete all as specified and as directed

Supply and fix in repairs 1000 litres capacity Rotational moulded Polyethylene water storage tanks (cylindrical vertical with closed top) Double layered , hoisted and fixed in position all as specified in SSR Part I etc and provision of 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight ;210gms.) .complete all as specified and as directed.Note :(I)Make of Ball valve :Prayag/M/S Shakthi Industries (II)Make of water tank : Sintex/Polycon/Infra (ISI Marked)

Supply and fix Grating square 150mmSize of Stainless steel Minimum weight :100 gms complete all as specified and as directed . Make :Paryag/M/S Shakthi Industries

Supply and fix in repair Harrison curtain rails, mild steel chromium plated with fixing brackets, stops and rollers etc as approved by GE complete all as specified and as directed.

Supply and fix in repair Brass Knob suitable of 35 to 40mm dia for curtain rod complete all as specified and as directed

Material and labour for Preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix Aluminium anodized sliding window / ventilator (double track) standard section of size 92 x 31.75 x 1.6 mm for bottom track, section of size 92 x 31.75x 1.4 mm for side and top frame, section of size 39 x 17 x 1.4 mm for top and bottom shutter rail, section of size 39 x 17 x 1.4 mm for outer style, section of size 39 x 27x 1.4 mm for inter lock style including fabrication to required size and fixed with 3 mm sheet glass oridinary quality, glazing and rubber gas cut including fitting etc with roller suitable spring catcher heavy duty, handle and locking arrangement complete all as specified and as directed

Notes: (i) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (ii) Make of Glass : :Saint Gobain/Modi Guard/ Gold Fish (iii) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of anodisation shall be of 15 Microns

Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and as directed..Note :Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised(extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and as directed.Note :Make :Everite/Hardwyn (ISI MARKED)

Supply and fix Aluminium mortice lock vertical type size 100mm, 4 leverscomplete all as specified and as directed.Note Make :Godrej/Harrison.Dhanraj

Material and labour for Reinforced cement concrete ,Design mix M-25 (using 20mm graded stone aggregate ) as in beams, cantilever and lintels over 1.5 m span etc or similar itemscomplete all as specified and as directed.

Material and labour for Reinforced cement concrete ,Design mix M-25 (using 20mm graded stone aggregate ) as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.

Material and labour for Use and waste of steel form work to side and soffit of beams, bressmers, cantilevers,and supports etc for rough finished surfaces complete all as specified and as directed.

Material and labour for Use and waste of steel form work to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and as directed.

Material and labour for Use and waste of steel form work to edges of concrete flats exc 10 cm but n.exc 20 cm wide. ,horizontal or sloping and similar works complete all as specified and as directed.

Supply and fix Mild steel TMT bar 10mm dia and over, cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Description all as per item No 108 here in before but 5 to 10 mm dia as in stirrups.

Excavation in trenches not exc. 1.5metre deep and not exec 1.5 metre wide and getting out in any type of soil up to top of drain pipe complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested etc for 150mm dia RCC pipe line, jointed in cement mortar complete all as specified and as directed .

Material and labour for 150mm RCC pipes class NP-2 confirming to IS laid in trenches and jointed in cement mortar 1:3 complete with collar complete all as specified and as directed .

Material and labour for Precast cement concrete block masonry in cement concrete blocks in PCC 1:3:6 type C1 ( using 20mm graded aggregate) set in cement mortar CM 1:6 complete all as specified and as directed.

Material and labour for Rendering 15mm thick other than fiar faces of brick/block masonry work in CM 1:4 and finished even & smooth without using extra cement complete all as specified and as directed.

Returning filling including spreading, leveling, watering in layers n. exc. 15cm in any type of soil complete all as specified and as directed.

Material and labour for Cutting into exiting manholes for connecting new drain making good to pipe and rendering cutting out (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 ,using 20 mm graded stone aggregate , smooth finished and forming benching as required for 150 mm dia pipe complete all as specified and as directed.

Material and labour for Concealed Point wiring 1.5 Sqmm single core FRLSH PVC insulated unsheathed 1100 volts grade copper conductor multi-stranded cables for phase and neutral drawn through and including rigid non - metallic PVC conduits, ISI marked 19/20 mm dia with all necessary fittings and provision of one run of Green coloured FRLSH PVC insulatedunsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm as continuous earth wire and connected to common earth dolly as per IS colour code with cast iron / pressed steel terminal box of suitable size & 1.0 mm thick duly painted inner and outside by anticorrosive paint, for switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover with brass screw, cup washer. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/ Havells (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Description all as per item No 117 here in before but for One fan/Exhaust Fan point controlled by one switchand regulator.

Description all as per item No 117 here in before but for One 05 Amps socket outlet on independent board.

Description all as per item No 117 here in before butfor for One socket point control by one switch with other switches on same board

Description all as per item No 117 here in before but wiring with 4 Sqmm single core PVC insulated FRLS unsheathed ,multi stranded 1100 volt grade copper conductor and with one run of copper conductor FRLS PVC insulated multi-stranded cable of size 4 Sqmm for earth continuity conductor and connecting to common earth dolly, complete for one 15 Amps power socket point on independent board complete all as specified and as directed.

Supply and fix Switch piano type 5 Amps flush tpe 230 volts AC one way, complete all as specified and as directed. Make -Anchor /Legrand/CONA

Supply and fix Socket outlet 2 in 1 5 pin, 5 amp, flush type , 230 volts AC one way, complete all as specified and as directed. Make -Anchor /Legrand/CONA

Supply and fix Switch piano type 15 Amps flush type 230 volts AC one way, complete all as specified and as directed. Make -Anchor /Legrand/CONA

Supply and fix Socket outlet 15 Amps 3 pin 5 Amps cum 3 pin 15 Amps flush type multipurpose, complete all as specified and as directed. Make -Anchor /Legrand/CONA

Supply and fix PVC or Polycarbonate ceiling rose of size 65x50 mm ,3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor /Legrand/CONA

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

Supply and fix in repair LED street light fitting 25Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed . Note :Make of exhaust fan :Almonard/Khaitan/Bajaj

Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm for earth continuity and connected to common earth dolly , ,complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Make : Legrand/L&T/Indo Asian

Supply and fix Miniature circuit breaker (MCB) of SPN 40 to 63 AMP 240V, 10KA 'C' curve following poles including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Legrand/ Indo Asian /ABB

Supply and fix MCB SP 240 Volt capacity 5 to 32 Amps‘C’ curve, complete all as specified and as directed. Make: Legrand/ Indo Asian /ABB

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Supplyind and laying CPVC pipes 40 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

M&L for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete including all connections carefully all as specified and directed.Note :Make : Sintex/Infra/Polycon (ISI MARKED)

Supply and fix 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Make : Prayag/M/S Shakthi Industries

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Material and labour for Construction of valve chamber of internal size 900 x 900 x 960mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle iron frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as directed.

M/s. KIRAN M CHOUGULE

M/s. N D KALING

RAJENDRA KRISHNA SARAF