Improvement and special repairs and maintenance to conference hall and Deep Bhavan office building.

Amount

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Dismantling tile work in floors, walls and roofs laid in cement mortar for thickness of tiles 10 mm to 25 mm including stacking material within 50 metres lead.

Demolishing R.C.C. work manually/ by mechanical means including cutting of reinforcement, stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead of area beyond 3 Sq.m.

Dismantling aluminium doors and windows including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Renewing broken glass panes with new frosted glass panes of 5mm. nominal thick, with teak wood fillets, wherever necessary, including removing broken glass pieces from windows, including supply of all materials, labour charges, tools, scaffolding, disposing broken glass panes, all other charges, as per direction etc., complete.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling of Wash basin from G.L. upto floor three level including stacking of serviceable material and disposal of unserviciable materials within a lead of 50 m including supply of all labours, tools and finishing etc. complete as directed by the engineer in charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge and fixtures complete, including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Orissa pattern W.C Pan of size 580x440 mm.

Dismantling W.C/EWC. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Dismantling of Urinal from G.L. upto floor three level including stacking of serviceable material and disposal of unserviciable materials within a lead of 50 m including supply of all labours, tools and finishing etc. complete as directed by the engineer in charge.

Dismantling of Urinal partion stone slab of size 0.60m x 0.90m (marbale stone) from G.L. upto floor three level including stacking of serviceable material and disposal of unserviciable materials within a lead of 50 m including supply of all labours, tools and finishing etc. complete as directed by the engineer in charge.

Dismantling of Granite stone slab of wash basin top from G.L. upto floor three level including stacking of serviceable material and disposal of unserviciable materials within a lead of 50 m including supply of all labours, tools and finishing etc. complete as directed by the engineer in charge.

Dismantling of Rolling shutter of size 1.20M X 2.80M with necessary battens and beading.,and stacking the same safely within 50m as directed.

Dismantling wooden boardings in lining of walls and partitions,Thickness above 10 mm up to 25 mm excluding supporting members but including stacking within 50 metres lead (cabin).

Dismantling G.I./ PVC pipes of nominal diameter between 15 to 40 mm (external / internal work) from walls, floors etc., including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead.

100 mm dia pipe.

75 to 80 mm dia pipe.

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters With cement mortar 1:4 (1 cement : 4 fine sand) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make for 25mm average thickness including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge, supply of all materials, labour, tools and plants, scaffolding and all other charges all as per direction etc., complete.

Cleaning rust from the reinforcing bars of 12mm dia and below to give it a total rust free steel surface by using Rustoff-100 chemical rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, applying Rustoff using approved brand for prevention of rust, providing and tieing extra reinforcement bars, providing chicken mesh with cleaned bars wherever directed, all as per direction of Engineer-In-Charge. Including supply of all materaisl, labour, tools, scaffolding and all other charges as per direction etc., complete.

Providing, mixing and applying with SBR Polymer (Approved brand) (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. of surface area mixed with specified proportion of approved polymer, supply of all materials, labour, tools and plants, scaffolding and all other charges all as per direction etc., complete.

Providing, mixing and applying SBR polymer (Approved brand) modified Cement mortar of approved make in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) for 25mm average thickness in two coats, as per specifications and directions of Engineer-in-charge including supply of all materials, labour, tools, scaffolding and all other charges as per direction etc., complete.

Providing and fixing approved second class teak wood wrought frames for doors, windows & ventilators with horns and holdfast fixing in cement concrete 1:3:6 (1 cement 3 course river sand 6 stone aggregate 20mm down gauge) as per standard drawings including supply of all materials, labour, tools & plantsand all other charges etc., complete.

Providing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length.

Providing and fixing approved second class teak wood, panelled/Glazed shutters of 35mm thick for Doors & Windows with 12mm thick teak wood panels of approved quality as per standard drawing and as directed of including all required anodised Aluminium fittings/ fixtures, brass Screws, of ISI quality supply of all materials,labours,tools & plants and all other charges etc., Complete.

35mm thick with 12mm thick Teak wood panels.

Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge.

Brick work with burnt clay wire cut bricks of approved first quality,size and of minimum class designation 7.5 as per I.S. 1977 in cement mortar 1:4(1 cement 4 coarse river sand/ M-sand of approved first quality) simultaneously pointing wherever required as directed including providing through bond between existing wall. including cost of all materials, labour, tools, scaffolding, curing,and all other charges for foundation & plinth / in Superstructure.

Superstructure.

Half Brick work with CM 1:3.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red.

Extra Granite top 18/20mm thick for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Plastering the exposed surface of concrete faces and brick wall masonry at all heights with cement mortar 1:3 (1 cement 3 fine river sand/M-sand of approved first quality) to the required thickness of 12 mm thick in one layer including scafolding, curing, making rough the smooth surface, supply of all materials, labour, tools and plants,and all other charges etc. complete.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant of approved quality and brand, upto 5mm depth and 5 mm width to arrest the leakages as per the direction of Engineer-in-charge complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling with EPDM rubber / neoprene gasket etc With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete.

Doorcraft Regular Aluminium Automatic Universal Hydraulic Door Closer for Home and Office Upto 60 kg Suitable for Steel Wooden Iron Aluminium Doors Lst25.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

Providing and laying in position specified grade of reinforced cement concrete, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level. Sunshade, lintel, roof, staircase.

Supplying, cutting, bending, binding, placing in position Fe 500 grade steel reinforcement of HYSD tor steel/TMT bars of make SAIL/VIZAG/RINL/TATA-TISCON/ JINDAL for R.C.C work at all heights as per drawing and as directed including supply of binding wire of approved first quality & thickness, cost of all materials, labour, tools and plants and all other charges etc. complete for all works.

Providing and fixing of rebar grouting of 20mm dia bar in existing beams and column at 200 mm depth with using HILTY RE-500 (Approved brand) Chemical by using scaning of existing column. Including supply of cost of labours, materials, tools and plants and all other charges etc. complete.

Providing and laying of plain cement concrete 1:3:6 (one cement 3 Coarse river sand/M-sand and 6 graded granite stone aggregate 20 mm nominal size of approved first quality) including mixing, laying, curing, consolidation excluding side shuttering etc., complete, supply of all materials, labours, tools & plants and all other charges etc., complete. for roof top.

Providing and laying bricks tiles of size 230 x 230 mm at all heights of approved quality & size over sloped roof slab as water proofing course provided with cement mortar 1:3 (1 cement 3 coarse sand of approved first quality) of 20 mm (Average) thick including laying, pointing with Cement mortar 1:3 (1 cement 2 coarse sand)in joints with neat finishing as directed cost including mixed with water proof compound in mortar & pointing, curing, supply of all materials, labours, tools & plants and all other charges etc, complete.

Supplying and fixing of Vitrified/Ceramic tiles flooring, Glazed tiles for walls Dadoing) (NITCO,Orient, Somany, Bell ) of approved premium quality at all heights after spreading and levelling with cement mortar 1:4(1 cement 4 coarse sand/M-sand) and pointing with white cement of approved quality admixtured with colour pigments etc., as directed including supply of all materials, labour, tools & plants curing and all other charges etc. complete.(thickness as per manufacture's specification)

virtified Tiles Flooring 600 x 600 mm size (C:M-1:4).

Anti skid tiles for toilet/bathroom.

Providing and fixing Ist quality ceramic glazed wall concept design tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing design false ceiling of 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete, specification and direction of the Engineer in Charge but excluding the cost of painting with : No additional payment will be made for design work.The rate may be quoted including design of work). The false ceiling design shall be got approved from the DLL, before execution of work.

Providing and fixing in position fully glazed aluminium sliding window with powder coating of approved shade of 15 micron and 5mm tinted glass of Saint Gobain or equivalent as directed upto three floor level. Extruded all sections should be of Jindal make or equivalent series B 18mm available in ALLOY 63400 and temper WP (HE9WP) corresponding to IS: 733 and IS: 1285 to be used for frame top and side (Unit wt. 1.06 Kg/m) and for bottom (Unit wt: 1.248 Kg/m) and shutter top and bottom (unit wt. 0.607 Kg/m) and shutter side (handle) (unit wt: 0.547 Kg/m). Aluminium sections shall be smooth, rust free, straight, mitred and only mechanical joints shall be used, welding shall not be permitted. Concealed lock of Indigo or equivalent and P.V.C. gasket is to be used in work. Aluminium Sections fixed with Raul plug and screws or with fixing clips or with expansion hold fasteners, including cleat angle, aluminium snap beading for glazing and 4 mm thick pin headed glasses for all openings provided for windows including cost of supply of all materials, labours, tools & plants, scaffolding all other charges, and as directed etc. complete. As per existing design or design approved by Director.

Providing and fixing water supply fittings( JAGUAR/CERA) with all necessary fixtures and specials of approved first quality brand/ manufacturer,colour (ISI make) as per the following items including all materials, labours, tools & plants and all other charges etc complete.

Providing and fixing C.P. brass long body bib cock 15mm nominal bore of approved quality conforming to IS standards and weighing not less than 690 gms.

CP brass bib cock 15mm dia.-Short body (Two way).

C.P brass short body bib cock of 15mm nominal bore conforming to IS :8931.

P/F C.P brass 15 mm dia 230 mm shower arm.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm dia.

P/F CP Brass 15 mm dia Stopcock.

P/F. C.P brass 15 mm dia Angle cock.

P/F C.P /S.S Health faucet jet 8mm dia. With flexible tube upto 1m. Long.

Providing and fixing wash basin of approved first quality brand (PARRYWARE/ JAGUAR/CERA/ NEYCER) manufacturer,colour size 550 x 400mm of size with single hole for pillar tap and fixing 15mm C.P Brass pillar tap and waste pipe with C.P. Brass coupling of size.

Providing and fixing PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 1500x4500 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 litres P.V.C. automatic flushing cistern.

Providing and fixing water supply line in CPVC pipes including all G.I fittings like Elbow, Tee etc., fixing in walls, ceiling with necessary G.I Clamps, Screws and laying of pipes in trenches of dia varying from 20 mm to 40 mm dia as and directed. Supply of all materials,labours,tools and plants etc., Complete.

20 mm dia CPVC pipe

25mm dia CPVC Pipe

32mm dia CPVC Pipe

Providing and fixing PVC fittings of heavy duty, approved first quality and brand (FINOLEX/ PRINCE/ ASHIRVAD /ORIPLAST/SUPREME) accessories like elbow, Tee, Bend,Reducers etc.,. Including Supply of all materials, labours, tools and plants and all other charges etc., complete.

Providing & laying 110mm dia PVC pipes of heavy type 6 Kgf/Sq.cm of approved brand and manufactures for rain water/SWR pipe line including fixing necessary clamps, screws and fittings, included jointing of pipes & fittings with PVC solvent etc. including walling, making good the wall, ceiling and floor including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge.

Providing & laying 75mm dia PVC pipes of heavy type 6 Kgf/Sq.cm of approved brand and manufactures for rain water/SWR pipe line including fixing necessary clamps, screws and fittings, included jointing of pipes & fittings with PVC solvent etc. including walling, making good the wall, ceiling and floor including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge.

110mm dia. PVC elbow.

110mm. dia PVC TEE.

110mm. dia. PVC bend/ offset.

110mm dia. PVC slotted vent cowl.

PVC 110mm dia. door bend.

PVC door bend 75 mm dia.

C.P grating 110mm. dia.

Supplying and fixing C.I. cover without frame for manholes 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Painting two coats interior plastic emulsion paint with first quality of aproved manufactures on undecorated wall surface, Ceiling surface to give an even shade after thoroughly brooming the surface to remove all dirt, dust mortar, draps and other foreign matter etc., applying one coat of cement primer etc. including the cost of supply of all labours, materials, tools & plants,scaffolding and ladder,brushes, and all other charges etc., complete. Brand Asian/Berger including one coat of primer having VOC content less than 50 grams/litre, as directed by Engineer in charge.

Painting two coats or more coat Exterior wheather paint (APEX ULTIMA) (Approved brand) over a coat of cement primer with First quality of approved manufactures on undecorated wall surface, Ceiling surface to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar draps and other foreign matter etc., applying one coat of cement primer including the cost of supply of all labours, materials, tools & plants,scaffolding and ladder,brushes, puttywhere ever required and all other charges etc., complete. Brand : Asian/Berger including one coat of primer as directed by Engineer in charge.

Painting two coats of first quality synthetic enamel paint of approved make and colour to previously painted wooden door, window etc., including cleaning all dirt, dust, sand papering the surface, supply of all materials, labour, tools, scaffolding and all other charges, as per direction etc., complete.

Painting two coats of first quality synthetic enamel paint of approved make and colour to previously painted metal surfaces at all heights after scraping all rust, applying red oxide metal primer of approved make, cleaning dirt, dust, including supply of all materials, labour, tools and all other charges, as per direction etc., complete.

Grouting the joints of flooring tiles/Granite Size of tiles/granite slab 1000x1000mm and other bigger size having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing Pest control and Anti-termite treatment by appointing a specialised agency as per the specifications mentioned by the Bureau of Indian Standards and Agencies specifications.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge-In Cement mortar.

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level.

Cement mortar 1:4 (1 cement : 4 coarse sand) 15- mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : of sectional area 40 square centimetres and above-Existing conference Table.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). first class teak wood.

Providing and fixing 40mm thick Fully Panelled shutters for doors, windows and clerestorey windows including heavy duty brass butt hinges, brass handle with necessary screws including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge : First Class Indian teak wood:

Ventilator Louver Glass

Varnishing with varnish of approved brand and manufacture : Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish.

Painting with synthetic enamel paint over wood surfaces of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and fixing Rolling / FABRIC Blinds

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in charge.

Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in- charge -12mm thickness.

Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with planks of sizes 14mm thick, 1900mm length (minimum) and 85mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 2050 rawl plugs, over underlayment of 4mm thick, expanded polyethylene foam sheets having 40kg/cum density over prepared surface. The bamboowood planks shall have minimum density of 1000Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer -in-charge.

Providing and constructing Conference table made of Ply wood and veneer finish with PU Finish. Cost inclusive of 50 mm thk table top, wire amanagement system necessary supports, apron, finished with Veneer.

Suppy of High back Executive chairof Godrej interio polyester Ergnomic motion, size 48Lx51Bx124H cm. having primary material of Air Leather (SKU; FFOFOCALMTBR1160M).The inclusive of material and delivery at site cost etc complete as directed.

Suppy of Godrej interio motion fabric office Executive chair (armed adjustable seat height), size ( 76 Cm Width X108.8Cm Height) cm. having primary material of Plastic, upholstery type Cushion.The inclusive of material and delivery at site cost etc complete as directed.

JPS CONSTRUCTIONS

M/s MSK Construction