Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-Finance | L1 | Accepted-Finance Lowest Bidder | |
| 2 | L2₹20.8 L+₹51,761 (2.56%)Rejected-Finance D 154 ADARSH NAGAR NARMADA ROAD JABALPUR 482001 M P | JABALPUR | MADHYA PRADESH | 482001 | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹23.0 L+₹2.8 L (13.6%)Rejected-Finance PLOT NO 79 SIS PARK DICHAON ENCLAVE PP2914 NAJAFGARH SOUTH WEST DELHI NEW DELHI 110043 | WEST DELHI | DELHI | 110043 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹23.1 L+₹2.8 L (14.0%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 |
| Sl No | Description | Qty | Unit | M/S.M.S.Devi.Const.Co L1 | RADHEY CONSTRUCTION L2 | R.P Builders L4 | M/S Parmod Johar L3 |
|---|---|---|---|---|---|---|---|
| 1.00Note: (i) The contractor or his authorized representative shall report daily to the Complaint Cell for collection of complaints and The contractor shall be required to attend complaints as and when intimated by the department through complaint slip , VYNUS , telephone or any otherauthorised means of communication .If it is not possible to rectify the same within timeline specified below, the matter along with detailed reasons shall immediately be brought to the notice of the Engineer-in-Charge by the contractor or his representative. If the Engineer-in-Charge is satisfied with the justification furnished, no recovery shall be effected on this account. (ii) All other routine maintenance complaints covered under the contract shall be attended to and rectified within 24 hours, commencing from the date and time of issue/intimation of the complaint. In case the complaint is not rectified within the stipulated period, a penalty of Rs. 120/- per complaint per day or part thereof shall be recovered from the contractor's dues.. However, labour charges for items covered under “M&L”, “S&F”, and “In Repair” shall be deemed to be included in the respective quoted rates. (iii) Items under this contract are of day-to-day nature and the complete scope/site cannot be forecast or handed over to the contractor at one time. The contractor shall therefore arrange adequate manpower, materials, and resources as per site requirements. In case the contractor fails to provide the required skilled labour in accordance with the contract provisions, suitable recoveries/penalties shall be levied as applicable. | |||||||
| 1.01(iv) In addition to the above, the contractor shall arrange and maintain all necessary T&P required for execution of the work, such as die sets (1/2" to 1") washers of all sizes, safeda, thread(soot) , M-seal, screws, nails, plugs, grease, putty, welding rods, portable welding machine, drilling machine with bits and the like, including necessary form work, scaffolding and safety measures complete to make the system functional and leak proof including necessary safety measures, complete all as specified and directed by the Engineer-in-Charge. (v) The cost of all the above arrangements, obligations, T&P, consumables, labour, safety measures, and incidental requirements shall be deemed to be included in the quoted rates of the respective items and no extra payment whatsoever shall be admissible on this account. | |||||||
| 2.00 | S&F in repairs chromium plated bib tap, long body with flange, cast copper alloy (fancy type), screwed for 15mm bore iron pipe complete all as specified and as directed. | 30 | Each | 350 ₹10,500 | 260 ₹7,800 Lowest | 450 ₹13,500 | 400 ₹12,000 |
| 3.00 | S&F in repairs Chromium plated Pillar tap cast copper alloy with capstan heads fency type screwed down high pressure screwed to 15 mm bore iron pipe complete all as specified and as directed. | 10 | Each | 300 ₹3,000 | 270 ₹2,700 Lowest | 550 ₹5,500 | 400 ₹4,000 |
| 4.00 | S&F in repairs chromium plated Stop valve/angle valves (fancy type) cast copper alloy, complete all as specified and as directed. | 40 | Each | 300 ₹12,000 | 280 ₹11,200 Lowest | 350 ₹14,000 | 500 ₹20,000 |
| 5.00 | S&F in repairs chromium plated brass overhead shower rose 75mm dia with arm 255mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and as directed. | 10 | Each | 200 ₹2,000 Lowest | 230 ₹2,300 | 250 ₹2,500 | 300 ₹3,000 |
| 6.00 | S&F in repairs, brass CP towel rail 60 cm long complete all as specified and as directed. | 20 | Each | 200 ₹4,000 | 120 ₹2,400 Lowest | 220 ₹4,400 | 500 ₹10,000 |
| 7.00 | S&F in repairs PVC connection 15 mm dia 45 cm long with 2 Nos brass check nuts with washer complete all as specified and as directed. | 50 | Each | 60 ₹3,000 | 50 ₹2,500 Lowest | 60 ₹3,000 | 100 ₹5,000 |
| 8.00 | S&F in repairs sinks with drainage board made of stainless steel sheet 1.00 mm thick kitchen or laboratory with plugs , washers and wastes including bnedding in cement mortar to dwarf wall or including fixing cantileter brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed. | 2 | Each | 800 ₹1,600 Lowest | 1,100 ₹2,200 | 1,400 ₹2,800 | 2,200 ₹4,400 |
| 9.00 | S&F in repairs 32 to 40 mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and as directed. | 125 | Each | 30 ₹3,750 Lowest | 50 ₹6,250 | 50 ₹6,250 | 40 ₹5,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
15 Aug 2026, 6:00 pmClosed
GE South Delhi Cantt-10
GE South Delhi Cantt-10
COMPREHENSIVE REPAIR AND MAINT, PERIODICAL SERVICES, INCLUDING DAY TO DAY B/R WORKS, REPAIRS/ REPLACEMENT OF JOINERY ITEMS, FLOORING, WALLS, PLUMBING SYSTEM, SANITARY ITEMS, TILING AND OTHER LEAKAGE, SEEPAGE WKS FOR OTM ACCN DGIS, APS DTE AND IML
2026_MES_779495_1
GE/TOKEN-35/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE South Delhi Cantt
As per Tender Documents
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹60,000
Yes
29 Sept 2026
18 Jul 2026
17 Aug 2026
18 Jul 2026
15 Aug 2026
1 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | (iv) In addition to the above, the contractor shall arrange and maintain all necessary T&P required for execution of the work, such as die sets (1/2" to 1") washers of all sizes, safeda, thread(soot) , M-seal, screws, nails, plugs, grease, putty, welding rods, portable welding machine, drilling machine with bits and the like, including necessary form work, scaffolding and safety measures complete to make the system functional and leak proof including necessary safety measures, complete all as specified and directed by the Engineer-in-Charge.
(v) The cost of all the above arrangements, obligations, T&P, consumables, labour, safety measures, and incidental requirements shall be deemed to be included in the quoted rates of the respective items and no extra payment whatsoever shall be admissible on this account. | - | - | - | - |
| 2 | S&F in repairs chromium plated bib tap, long body with flange, cast copper alloy (fancy type), screwed for 15mm bore iron pipe complete all as specified and as directed. | 30 | Each | 1.25 | ₹37.5 |
| 3 | S&F in repairs Chromium plated Pillar tap cast copper alloy with capstan heads fency type screwed down high pressure screwed to 15 mm bore iron pipe complete all as specified and as directed. | 10 | Each | - | - |
| 4 | S&F in repairs chromium plated Stop valve/angle valves (fancy type) cast copper alloy, complete all as specified and as directed. | 40 | Each | 100 | ₹4,000 |
| 5 | S&F in repairs chromium plated brass overhead shower rose 75mm dia with arm 255mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and as directed. | 10 | Each | 53 | ₹530 |
| 6 | S&F in repairs, brass CP towel rail 60 cm long complete all as specified and as directed. | 20 | Each | 10 | ₹200 |
| 7 | S&F in repairs PVC connection 15 mm dia 45 cm long with 2 Nos brass check nuts with washer complete all as specified and as directed. | 50 | Each | 11 | ₹550 |
| 8 | S&F in repairs sinks with drainage board made of stainless steel sheet 1.00 mm thick kitchen or laboratory with plugs , washers and wastes including bnedding in cement mortar to dwarf wall or including fixing cantileter brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed. | 2 | Each | 10 | ₹20 |
| 9 | S&F in repairs 32 to 40 mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and as directed. | 125 | Each | 22 | ₹2,750 |
| 10 | S&F in repairs CP grating 127 mm dia with/without hole round, fixed on floor/nahani trap, fixed with cement mortar (1:3) complete all as specified and as directed. | 50 | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.72 MB
SOC35.pdf
Additional Documents • 0.37 MB
TenderpagesT35.pdf
Tender Documents • 1.30 MB
BOQ_873090.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .