PROVN OF SHED FOR TFF AT

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

Returing, filling in trenches, incl spreading, levelling, watering and well ramming in layers not exc 25 Cm in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not. exc. 50 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor (1:6)., etc complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:4:8) type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etc complete all as specified and directed

M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum, getting out, reterning filling and ramming earth or broken rubber mixed with earth around in layers not exceeing 25 cm, watering and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and directed.

S & F of steel work in tubular/Rolled trusses,purlins,rafters,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed.

S & F of Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.

S & F of Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The pre-painted galvaluame aluminium zinc GI based profile pattern steel sheet should be TATA Blue Scope colourbond XRW or equivalent as approved by GE.

S & F of Pre-painted galvalume aluminium zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge.

S&F for 1.25mm thick mild steel sheet eaves gutters of dia 150mm, galvanised class 3, half round with rounded edges ,proper clamping to existing purlins,rafters,wall etc complete all as specified and as directed.

M&L in for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over 40mm thick sand cushion complete all as specified and as directed. Note:- The sand for cushioning shall be measured and paid seperately.

Supply & laying of sand for cushining under interlocking paver block as provided under item No 16 of BOQ.

Goyal Construction

SATHI ENTERPRISES

Messers Yogendra Kumar Sankhla

BHATIA ASSOCIATES

KAILASH CHANDRA KHANDELWAL

R. S. JAIN AND SONS