Special Repair of staff quarter and Academic block and Teaching block and Residence (E.I. Internal only) in Sainik School Campus at Gothra Tappa Khori in District Rewari

Amount

COPPER WIRING IN MS CONDUIT (SURFACE/RECESS)Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe.Group B

Wiring for Twin control light point with 2 nos ,2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6mm thick MS conduit pipeGroup B

Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as requiredGroup B

Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as requiredGroup B

MS CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTSSupply and erection of MS conduit pipe 1.6 mm thick , ISi marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of workMS Pipe of 20 mm dia

MS Pipe of 25 mm dia

PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICALSupply and erection of PVC CONDUIT ISi marked (Medium) recessed in walceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work.PVC pipe of 25 mm dia.

FITTING AND ACCESSORIESProviding and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.Call bell 220/230 volts musical type

Bell push

Bakelite angle/straight button holder large size

Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job.

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects.1 & 2 Modules including combined plate for Telephone and data

Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work

Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required

Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required

Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc.Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the workTRIPLE POLE MCCB 16 to 100 Amp, 25 K

TRIPLE POLE MCCB 200 to 250 Amp, 25 KA

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the workSPN DB Double Door 8 way ( 2 incoming and 6 outgoing)

SPN DB Double Door 12 way ( 2 incoming and 10 outgoing)

TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing)

TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:-6 amp. to 32 amp Single Pole

6 amp. to 32 amp Double POLE

6 amp. to 32 amp MCB's TRIPLE POLE

6 amp. to 32 amp MCB's FOUR POLE

Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work.DP RCCB 30ma sensitivity , 25 A

FP RCCB 30ma sensitivity, 40 A

Supply and erection of blanking sheet in existing distribution board

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide

Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages

Supply and erection of shock restoration chart in glass frame.

Earthing with GI earth pipe 4.5 m long and 40mm dia with masonry enclosure on the top etc. as reuired.

Extra for using salt and charcoal / coke for pipe earth electrode as required

Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangemnt and watering pipe etc.(but without charcoal or coke and salt )

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.

Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .

Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size

Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers

Providing and fixing testing joints made of 20mm x 3mm thick G.I. strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete

LT CABLESupply and erection of suitable compression type brass cable glands for underground Cable :-10 sqmm to 16 sqmm Cable 2 to 4 Core

25 sqmm to 50 sqmm Cable 2 to 4 Core

MISCELLANEOUS ITEMSS/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the workDWC/HDPE pipe 90/75 mm outer dialinner dia

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.Cable size 1.5 sq.mm(3/ 0.81 mm)

Cable size 4.0 sq.mm(7/ 0.85 mm)

Cable size 10.0 sq.mm(7/ 1.05 mm)

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 25 Sq. mm 3.5 Core Ard. Cable .

10 Sq. mm 4 Core Ard. Cable .

kunwar electricals

MS Engineers