MTPS I CA CWS I Reconditioning of GRP fan blades 2 set of Cooling Tower ID fans of Unit I AND II

Amount

1. Charges for loading, unloading of 1 set of GRP / FRP fan blades ( 8 Nos) of cooling tower ID fans of stage-I from MTPS-I central stores to outside workshop for reconditioning works and return back the same from outside workshop to MTPS -I central stores after completion of Reconditioning works.

Charges for cleaning of blades with wire brush and acid washing. Grinding and removing of existing resin, putty and chopped strand mat over the arm and blade surface of entire blade.(Cooling towers of Paharpur of Model 1514-11& L&T make of Model WNC 2310.)

Charges for smooth leveling by grinding and sander machine, applying putty on the arm and blade surface, smooth leveling by emery sheet. After that the chopped strand mat to be wounded on the blade and arm surface area mixed with Isobathic resin, Catalyst, Accelerator & pigment as recondition work .[Cost of Isobathic resin, catalyst, accelerator and pigment are on contractor scope ( Cooling towers of Paharpur of Model 1514-11& L&T make of Model WNC 2310.)

Charges for applying two coats of Isobathic resin for smooth finishing over the entire surface of blade, weighing of blade should be maintained 65Kgs+/-0.5 and marking the weight. [Cost of Isobathic resin on contractor scope] (Cooling towers of Paharpur of Model 1514-11& L&T make of Model WNC 2310.)

Charges for painting with two coats of 1st quality epoxy grey Paint over the surface of the GRP blades.

Cost of Epoxy Smoke Gray paint

Cost of Epoxy Thinner

Hire charges for Transporting (Vehicle Charge) Sl.No1

Cost of Putty Material for Sl.No.3

Cost of Chopped strand Material for Sl.No.3

Cost of Isobathic Resin Material for Sl.No.3&4

Cost of Accelerator Material for Sl.No.3&4

Cost of Catalyst Material for Sl.No.3&4

Cost of Pigment Material for Sl.No.3&4

Cost of Consumable and T&P for Sl.No.1to5