REPAIR MAINT OF FENCING BOUNDARY WALL GATES AND PAVED AREA IN ZONE B AREA OF AGE BR I UNDER GE C KIRKEE

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces.

All as per item 01 above but embedded in conrete.

Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete.

M & L for cement conc 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete.

M&L for MS work conforing to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete and all as specified and directed.

S & F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A

M&L for plain,black mild steel sheeting in gates, 1.25mm thick sheet welded or shouldered to angle iron frame and all as specified and directed.

M & L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders,walk ways; railings con forming to Fe.290.Gde-E-165.

Dismantling chanlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.

Supply only Chain link fencing using 3.15mm dia GI wire 75x75mm mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and directed.

S & F flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified.

S& F 10mm dia and over round bars cut to length bent to shape for stifners etc and similar work complete.

Mild steel screw bolts (machine made) 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

Restraining and resecuring of barbed wire including removal & refixing of concerntina coil wherever required in single/double security fencing/on security wall complete all as directed.

M & L for preparation of new steel and iron surfaces of any description over 10cms width or girth & applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete.

Demolition of PCC in any position not otherwise specifically provided for, as in surface channel, drains, manholes, copings, ground floors and pavings of any description and in any position and removing debris out side MD land complete all as specified and directed by Engr-in-Charge.

Material and labour for 100 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in sub base complete all as specified.

Material and labour for 75 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in sub base complete all as specified.

Material and labour for 25mm thick crushed stone dust/sand filling under floors or in foundations including watering and consolidation complete all as directed.

Material and labour for 80mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement no pigment confirming to IS 15658-2006 complete all as directed.

Material and labour for 60mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-35 grade with grey cement no pigment confirming to IS 15658-2006 complete all as directed.

M & L providing 40mm thick plain cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in floor etc finished even & smooth without using extra cement complete all as directed.

M & L for glass dividing strips 3mm thick and 38mm width inserted in position conform to design complete all as specified.

Material and labour for PCC 1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

M & L for PCC 100 mm thick 1:2:4 type B2 as in hardstanding/floor (using 20mm graded stone aggregate) finished even & smooth without using extra cement complete all as directed.

Finishing surface of concrete by brooming with brooms while concrete is green complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 20mm thick average thickness for laying floor finishes in cement mortar 1:6 complete all as specified.

Material and labour for coloured glossy finish chequered cement concrete tiles of size 30 cm x 30 cm x25 mm thick with grey cement and pigments , set jointed and pointed in neat cement slurry in floors over existing screed bed complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

M & L for pre cast cement concrete solid block masonry with solid block of the grade C1 (1:3:6) set in CM (1:6) complete all as specified.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M & L for providing cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in coping/benching and the like including necessary form work complete all as specified.

Racking out joints/pointing to random rubble or polygonal rubble uncorsed or brought up to courses masonry built in cement or lime mortar, complete all as specified.

M & L for taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M& L rendering 15 mm thick on fair faces of brick/block masonry/stone masonry surfaces in CM 1:4 and finishing plastered surfaces even and smooth without using extra cement complete all as specified.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

V.R.PRAJAPATI AND CO.

venkateshwara infra

M/S JAYCONSTRUCTION CO

JP ENTERPRISES

GGS Infra

MANIYA CONSTRUCTION CO.