Construction Lift Shafts at Transit Accommodation for Kashmiri Migrant Employees at Chowgam Kulgam (12 blocks)

Earth work in excavation by manual means over areas (exceeding 30 Cm in depth 1.% mtr in width as well as 10 Sqm on plan) incld. Disposal of excavated earth laed upto 50 mtr and lift upto 1.5 Mtr as direected by Engineer Incharge . All kinds of soil.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Dismantling stone slab(granite) flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

P/L in position cement conc: of specified grade M- 10) excld: the cost of Centering and shuttering. All work upto plinth level.1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size

Providing and laying in position of reinforced cement concrete 1:1.5:3 (1cementL1.5coarse snad: 3graded stone aggregate 20mm nominal size) crushed including curing but excluding the cost of centering, shuttering, finishing and reinforecement- All works upto plinth

Reinforcement for RCC work incld. Strutting cutting bending,placing in position and binding all complete. Thermo mechnically treated bars etc complete. Incld: all carriages complete

Centring and shuttering incld: strutting , Propping etc and removal of form work for:-

Foundations, footings bases of columns etc for mass conc:

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete Raj Nagar plain

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Incld: all carriages complete.Welded @45kg/sqm (12 Blocks)

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of

Modificatioon of existing truss incld. removal of roofing sheets as asper the directions of EIC

Chapping and rebaring of old raft with new raft complete job as per directions of EIC (chipping of old raft at an angle of 45degree clearing the surface with blower, applying chemical as[er the manufacturer procedure ( Sikabond lp-32mnitobond 0 , inserting bars using appropraite chemical hili-hy 200-R complete job

Driilling of holes in beams ,cleaning drilledv holes with blower ,applying chemicals (Hilti Hy200-Y), installing M-16x150bolts complete job as per directions of EIC

Supplying and fixing allumunium solid sheet cladding with extruded alumunium basis frame of appropraite size angle cleats ,weather sealants , rivets , GI brackets all as approved using suitable bolts on structural steel work incld. Neacessay accessories complete in all respects incld. labour cherges etc complete for finished item of work but incld cost of structural steel fabrication scaffolding charges if any 6mm thick

Providing and fixing mild steel (MS) wire mesh (chicken type) of approved quality, hexagonal pattern, made from 20–22 gauge wire, with mesh size not exceeding 25 mm (1"), fixed to , including cutting, overlapping, tying, scaffolding, and all leads and lifts, complete as directed by Engineer-in-Charge.

Taking out existing ,MS grill/railing of stair case without dammage and re fixing the same in position after necessary minor repairs and welding ensuring proper alignment and level incl priming coat and paint comple job.

Carriage of Sand /stone aggregate for source to siteof work for an avg: lead of 10 Kms