REPAIRS, PAINTING AND POLISHING TO ALL TYPE OF SOFAS AND STEEL FURNITURE AT NAVAL BASE KARWAR

Amount

Note: Removal of following existing unsv components of all type of sofa and steel furnitures carefully without disturbing the adjoining parts and S & F new components mentioned below. Apart from BSO furniture store the repair/painting will also be carried out in various user units with in a radius of approx 20 kms under GE (Seabird) Karwar as and when required and as directed

Table Office Clerk Steel FD 381, FD 1004, FD 84(M)

Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly French polished after preparation of surface shall be provided all around the top all as directed .

Material and labour for removing unserviceable lock of table by Supply and fix new lock with duplicate key for table of (As per sample and as directed by Engr-in-Charge) all as shown on drawing.

Material and labour for removing unserviceable rubber shoes from leg and Supply and fix new rubber shoe of superior quality as per sample approved.

Material and labour for removing the unserviceable PVC recessed handle from drawer by Supply and fix new PVC recessed handle of trade pattern of superior quality as per sample approved.

Material and labour for preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed Make : (As per particular specification) internally and externally complete including applying putty where required.

Table Office Clerk Steel MEC 381

Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly French polished after preparation of surface shall be provided all around the top all as directed .

Material and labour for removing unserviceable lock of table by Supply and fix new lock with duplicate key for table of all as shown on drawing.(As per sample and as directed by Engr-in-Charge)

Material and labour for removing unserviceable rubber shoes from leg and Supply and fix new rubber shoes of superior quality as per sample approved.

Material and labour for removing the unserviceable PVC recessed handle from drawer by Supply and fix new PVC recessed handle of trade pattern of superior quality as per sample approved.

Material and labour for preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray OR as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Table Office Officer Steel MEC 2994, FD-1003

Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS of Make (As per particular specification) including teak wood edging 6 mm thick duly French polished after preparation of surface shall be provided all around the top all as directed .

Material and labour for removing unserviceable lock of table by Supply and fix new lock with duplicate key for table of make as per particular specification all as shown on drawing.

Material and labour for removing unserviceable rubber shoes from leg and Supply and fix new rubber shoes of superior quality as per sample approved.

Material and labour for removing the unserviceable PVC recessed handle from drawer by Supply and fix new PVC recessed handle of trade pattern of superior quality as per sample approved.

Material and labour for preparation surface of table and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Charpoy GI pipe FD-220

Material and labour for removing unserviceable plywood and Supply and fix plywood commercial 12mm thick BWR grade ISI marked of Make as per particular specification of size 2100 x 900mm all as directed by Engr-in-Charge.

Book Case Steel MEC 1028, MEC 180

Material and labour for removing unserviceable CP handle from shutter and Supply and fix new 100mm CP handle with nut of superior quality of trade pattern as per sample approved.

Material and labour for removing unserviceable lock of book case by Supply and fix new lock with duplicate key (set of four) of Make : (As per particular specification) all as shown on drawing.

Material and labour for removing unserviceable MS channel/guide rail by Supply and fix new MS channel/guide rail complete including all accessories all as per drawing.

Material and labour for preparation surface of Book Case Steel and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Almirah steel storewell large MEC 2936

Material and labour for removing unserviceable lock of almirah by Supply and fix new lock with duplicate key of Make as per particular specification all as shown on drawing.

Material and labour for removing unserviceable CP handle from door shutter by Supply and fix new 125mm CP handle with nut and bolts as per sample approved

Material and labour for removing unserviceable hinges by Supply and fix new 75mm hinges of superior quality of make as per sample approved.

Material and labour for repair of door system and shelves of almirah to make it functional smoothly all as directed by Engr-in-Charge.

Material and labour for removing unserviceable CP hanging rod of almirah by Supply and fix new CP hanging rod of dia 25mm of superior quality as per sample approved.

Material and labour for preparation surface of Almirah Steel large and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Almirah steel large MEC 351

Material and labour for removing unserviceable lock of almirah by Supply and fix new lock with duplicate key of Make : (As per particular specification) all as shown on drawing.

Material and labour for removing unserviceable CP handle from door shutter by Supply and fix new 125mm CP handle with nut and bolts of Make as per particular specification

Material and labour for removing unserviceable hinges by Supply and fix new 75mm hinges of superior quality as per sample approved.

Material and labour for repair of door system and shelves of almirah to make it functional smoothly all as directed by Engr-in-Charge.

Material and labour for preparation surface of Almirah Steel large and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Almirah med steel FD 1032

Material and labour for removing unserviceable lock of almirah by Supply and fix new lock with duplicate key for of Make as per particular specification and all as shown on drawing.

Material and labour for preparation surface of Almirah Steel Medium and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Almirah med steel MEC 2938, MEC 350

Material and labour for removing unserviceable lock of almirah by Supply and fix new lock with duplicate key of Make : (As per particular specification) all as shown on drawing.

Material and labour for removing unserviceable CP handle from door shutter by Supply and fix new 125mm CP handle with nut and bolts of Make as per particular specification and all as shown on drawing.

Material and labour for removing unserviceable hinges by Supply and fix new 75mm hinges of superior quality of make as per sample approved.

Material and labour for preparation surface of Almirah Steel Medium and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (make as per particular specification) internally and externally complete including applying putty where required.

Charpoy IP hard top FD/MAP II/01

Material and labour for removing unserviceable plywood top of charpoy by Supply and fix top made of plywood commercial 12mm thick confirming to IS BWR grade in one piece of (Make : As per particular specification) all as shown on drawing.

Material and labour for removing unserviceable rubber shoes from leg of charpoy by Supply and fix new rubber shoe of superior quality as per sample approved.

Material and labour for preparation of surface of charpoy and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Bed Hard FD/E6/MAP/08 (R)

Material and labour for removing unserviceable plywood top of bed hard and Supply and fix plywood commercial 12mm thick BWR grade ISI marked of Make (As per particular specification) to bed hard all as per shown on drawing and as directed by Engr in Charge

Material and labour for removing unserviceable prelaminated particle board from head board by Supply and fix new 18/19mm thick prelaminated Particle board exterior grade confirming to IS of Make as per particular specification to bed hard all as per shown on drawing.

Material and labour for removing unserviceable prelaminated particle board from foot board by Supply and fix new 18/19mm thick prelaminated MDF board exterior grade confirming to IS of Make as per particular specification to bed hard all as per shown on drawing.

Material and labour for removing unserviceable rubber shoes from leg by Supply and fix new rubber shoe of superior quality as per sample approved.

Material and labour for preparation of surface of Bed Hard and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Teapoy Verandah(FD/E6/MAP/17)

Material and labour for removing unserviceable top of Teapoy by Supply and fix new top made out of prelaminated particle board 18/19mm thick exterior grade confirming to IS of Make as per particular specification all as per shown on drawing.

Material and labour for removing unserviceable rubber shoes from leg by Supply and fix new rubber shoe of superior quality as per sample approved.

Material and labour for preparation surface of Teapoy and paint one coat synthetic enamel paint 1st grade of colour Black or as directed Make as per particular specification to complete steel surface including applying putty where required.

Charpoy IP folding FD 388R

Material and labour for removing unserviceable plywood top of charpoy IP folding and Supply and fix new 9mm thick ply wood top ISI marked of BWR grade of Make as per particular specification to charpoy IP folding all as per shown on drawing.

Material and labour for preparation surface of charpoy and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/White/Black/OG/OR as directed and Make as per particular specification to complete steel surface including applying putty where required.

Rack shoe steel FD/MAP II/02R

Material and labour for preparation of surface of rack shoe and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Rack shoe C3/MEC/SP/182/MO/17

Material and labour for removing unserviceable drawer of rack shoe steel by Supply and fix new 12 mm thick BWR grade commercial plywood of Make : (As per particular specification) duly laminated decorative 1.5mm thick of Make as per particular specification in front side of drawer all as specified and as per drawing.

Material and labour for removing unserviceable knob from drawer by Supply and fix new Knob of superior quality as per sample approved.

Material and labour for preparation surface of rack shoe and paint one coat synthetic enamel paint 1st grade of colour Black/OG as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Cabinet filling steel MEC 2933

Material and labour for removing unserviceable lock of cabinet filing by Supply and fix new lock with duplicate key of Make as per particular specification all as shown on drawing.

Material and labour for making drawer system serviceable to functional smoothly all as directed by Engr-in-Charge.

Material and labour for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed ( Make as per particular specification) to complete steel surface including applying putty where required.

Rack steel 6 tier MEC 382R1E

Material and labour for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Material and labour for removing unserviceable nut and bolts Supply and fix new nut and bolts of superior quality to fixing the shelves system all as shown on drawing.

Table 90 x 60 x 75 cm with drawer MEC 1008

Material and labour for removing old unserviceable top of table 90 x 60 x 75 cm Supply and fix new table top made out of 18/19mm thick prelaminated particle board of Make as per particular specification and PVC edging/beading of superior quality all around the top of table all as per drg.

Material and labour for making drawer system serviceable to function smoothly all as directed by Engr-in-Charge.

Material and labour for removing unserviceable rubber shoes from leg and Supply and fix new rubber shoe of superior quality as per sample approved.

Material and labour for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Locker steel MEC/FD/1029, FD -1029

Material and labour for removing unserviceable lock by Supply and fix new lock with duplicate key of Make as per particular specification all as shown on drawing.

Material and labour for removing unserviceable CP handle from door shutter by Supply and fix new 125mm CP handle with nut and bolts of Make as per particular specification and all as shown on drawing.

Material and labour for removing unserviceable hinges by Supply and fix new 75mm hinges of superior quality as per sample approved.

Material and labour for repair of door system and shelves of locker to make it functional smoothly all as directed by Engr-in-Charge.

Material and labour for preparation of surface of locker and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Table Computer FD/E6/MAP/03

(b) Material and labour for removing unserviceable key board tray and Supply and fix new key board tray made out of 18/19 mm prelaminated Particle board exterior grade on telescopic channel of shape and size with PVC lipping all around as directed and as shown in drg.

(d) Material and labour for Removing old unserviceable telescopic channel and Supply and fix of new telescopic channel of approved make as directed by Engr-in-Charge and all as per drawing including fixing of keyboard tray/drawers in place.

(e) Material and labour for removing unserviceable drawer and Supply and fix new drawer made out of 18/19 mm prelaminated Particle board exterior grade on telescopic channel of shape and size with PVC lipping as directed and a knob as shown in drg.

Table Bedside FD/E6/MAP/15(R)

(b) Material and labour for removing unserviceable top drawer and Supply and fix new top drawer made out of 18mm prelaminated particle board for the front face and 12mm plywood BWR grade on sides ,bottom and back and PVC lipping all around as directed including fixing of the drawers in place and rest all as shown in drg.

(c) Material and labour for removing unserviceable bottom drawer and Supply and fix new bottom drawer made out of 18mm prelaminated particle board for the front face and 12mm plywood BWR grade on sides, bottom and back and PVC lipping all around as directed including fixing of the drawers in place and rest all as shown in drg.

Material and labour for preparation of surface of table bedside and paint one coat synthetic enamel paint 1st grade of colour Black or as directed (Make as per particular specification) complete as directed.

Material and labour for electric welding point up to exec 10mm to 25mm to the broken joints of steel furniture (table, locker, almirah, book case, bed, chair etc) wherever required all as directed by Engr-in-Charge

Stool steel 305x305x510mm / 760mm FD 81M, MEC 2940

(a) Material and labour for preparation of surface and paint with one coat synthetic enamel 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Table dinning 4/6 person steel MEC 2946

(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in piece made out of 25mm thick prelaminated Particle board exterior grade confirming to IS of Make as per particular specification including PVC lipping for beading after preparation of surface shall be provided all around the top all as directed and as shown on drawing

(b) Material and labour for removing old unserviceable rubber shoes from leg of table dinning steel by Supply and fix new rubber shoes of superior quality as per approved sample.

(c) Material and labour for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

Side rack with tray steel FD 1023 MEC 1023

(a) Material and labour for Painting of one coat of smoke gray/White/brown/Silver Gray or as directed synthetic enamel paint (Make as per particular specification) to side rack with tray steel including applying putty for depressed surface before painting all as specified and shown on drgs and directed by Engineer-in-Charge.

Rack steel 5 tier MEC 382R1A

(a) Material and labour for preparation of surface and paint one coat synthetic enamel paint 1st grade of colour smoke gray/White/brown/Silver Gray (Make as per particular specification) to complete steel surface including applying putty where required.

(b) Material and labour for removing unserviceable nut and bolts Supply and fix new nut and bolts of superior quality to fixing the shelves system all as shown on drawing.

Rack steel 3 tier MEC 382R1D

(a) Material and labour for preparation surface of and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) to complete steel surface including applying putty where required.

(b) Material and labour for removing unserviceable nut and bolts Supply and fix new nut and bolts of superior quality to fixing the shelves system all as shown on drawing.

Locker steel PL13-A4-D21836

(a) Material and labour for removing unserviceable lock of Locker Steel by Supply and fix new lock with duplicate key for table of Make as per particular specification all as shown on drawing.

(b) Material and labour for removing the unserviceable PVC recessed handle from shutter by Supply and fix new PVC recessed handle of trade pattern of superior quality as per sample approved.

(c) Material and labour for preparation surface of locker and paint one coat synthetic enamel paint 1st grade of colour Smoke Gray/Silver Gray or as directed (Make as per particular specification) internally and externally complete including applying putty where required.

Sofa single chair MEC 2910

(a) Material and labour for removing old faded rexine from seat and back cushion of sofa chair (single seater) and Supply and fix new latherite rexine of best quality not less than Rs 285/- per metre as per sample approved for seat and back cushion complete all as specified shown in drawing and as directed.

(b) Material and labour removing old unserviceable seat and back cushion with old faded rexine of sofa chair (single seater) and Supply and fix new 100mm thick cushion (cool foam) 40 density duly upholstered / covered with new latherite rexine of best quality not less than Rs 275/- per metre as per sample approved for seat and back all as specified shown in drawing and as directed.

(c) Preparation of old decorated / new replaced parts /surface of sofa single chair smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa two seater MEC 2910

(a) Material and labour removing Old faded rexine from seat and back cushion of sofa set (two seater) and Supply and fix new rexine of best quality not less than Rs 285/- per metre as per sample approved for seat and back cushion complete all as specified shown in drawing and as directed.

(b) Material and labour removing old unserviceable seat and back cushion with old faded rexine of sofa set (two seater) and S &F new 100mm thick cushion (cool foam) 40 density duly upholstered / covered with new rexine of best quality not less than Rs 275/- per metre as per sample approved for seat/back all as specified shown in drawing and as directed.

(c) Preparation of old decorated / new replaced parts /surface of sofa two seater smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa five seater MEC 2910

(a) Material and labour removing Old faded resin of sofa set five seater (two single seater+ one three seater) and Supply and fix new latherite rexine of best quality not less than Rs 285/- per metre as per sample approved complete all as specified shown in drawing and as directed.

(b) Material and labour removing old unserviceable seat cushion with old faded resin of sofa set five seater(two single seater+ one three seater) and Supply and fix new 100mm thick cushion (cool foam) 40 density duly upholstered / covered with new rexine of best quality not less than Rs 275/- per metre as per sample approved all as specified shown in drawing and as directed.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five seater smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa five seater rexine TP

(a) Material and labour removing Old faded rexine from cushion of sofa set five seater (two single plus one three seater) and Supply and fix new rexine of best quality not less than Rs. 285/- per metre as per approved sample for complete sofa set as per required size/shape complete all as specified shown in drawing and as directed. Drg No :Godrej-Model No 2082(TP)

Sofa set (1+1+3) (2+3) (1) Sofa set (1+1+3) (2+3) (1) C3/MEC/SP/205, C3/MEC/SP/202-02, C3/MEC/SP/ 200/MO-19A

(a) Material and labour removing Old unserviceable cushion of sofa seat/back and Supply and fix 100mm thick cushion (cool foam) 40 density size all as per Drg and all as specified and as directed. Note : Single cushion seat/ back shall be measured as one unit.

(b) Material and labour removing old faded Tapestry cloth from seat/back cushion of sofa (single/two/three seater) by S &F new tapestry cloth of best quality not less than Rs 384/- per metre as per sample approved. size as per Drg and all as specified Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five seater smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa set four/five seater FD-373, FD-281

(a) Material and labour removing Old unserviceable cushion of sofa seat/back and Supply and fix New 100mm thick cushion (cool foam) 40 density size as per Drg and all as specified and as directed. Note : Single cushion seat/ back shall be measured as one unit.

(b) Material and labour removing old faded Tapestry cloth from seat/back cushion of sofa Set and S &F new tapestry cloth of best quality not less than Rs 384/- per metre as per sample approved. Size al as per Drg and as directed. Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five/four seater smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa set four/five seater FD/MAP-II/02

(a) Material and labour removing Old unserviceable cushion of sofa seat/back and Supply and fix New 100mm thick cushion (cool foam) 40 density all as specified shown in drawing and as directed. . Note : Single cushion seat/ back shall be measured as one unit.

(b) Material and labour removing old faded Tapestry cloth from seat/back cushion of sofa Set and Supply and fix new tapestry cloth of best quality not less than Rs 384/- per metre as per sample approved. all as specified shown in drawing and as directed. Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five/four seater smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa Single Seater (Spl Design) C3/MEC/SP/ 200/MO-19A

(a) Material and labour removing Old faded tapestry cloth from cushion of sofa Single seater and Supply and fix new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa Single seater as per required size/shape complete all as specified shown in drawing and as directed.

(b) Preparation of old decorated / new replaced parts /surface of sofa single seater smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa Two Seater (Spl Design) C3/MEC/SP/ 200/MO-19A

(a) Material and labour removing Old faded tapestry cloth from cushion of sofa Two seater and Supply and fix new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa Two Seater as per required size/shape complete all as specified shown in drawing and as directed.

(b) Preparation of old decorated / new replaced parts /surface of sofa Two seater smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa Three Seater (Spl Design) C3/MEC/SP/ 200/MO-19A

(a) Material and labour removing Old faded tapestry cloth from cushion of sofa set three seater and Supply and fix new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa three seater as per required size/shape complete all as specified shown in drawing and as directed.

(b) Preparation of old decorated / new replaced parts /surface of sofa Three seater smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed with box type C3/MEC/SP/175

(a) Material and labour for removing unserviceable plywood top of bed and Supply and fix new top made out of 12 mm thick plywood commercial BWR grade ISI marked of size 838x965mm all as directed and as shown on drawing.

(b) Material and labour for removing unserviceable plywood front and back of head board of bed and Supply and fix new 32 mm thick block board ISI marked (770 x 900mm) duly fixed with 1mm thick decorative lamination teak veneer finished Front Side (300 x 900) & Back side (750 x 900) all as shown on drawing and as directed.

(c) Material and labour for removing unserviceable plywood front and back of foot board of bed and Supply and fix new block board ISI marked (470 x 900mm) duly fixed with 1mm thick decorative lamination teak veneer finish outer side (470 x 900) and inner side (75x900) all as shown on drawing and as directed.

(d) Material and labour for removing unserviceable side rail plywood of bed by Supply and fix new side rail made out of 9 mm thick plywood commercial BWR grade ISI marked duly fixed with 1.5mm thick decorative lamination teak veneer finished including 1st class teak support free from knots and cracks shall be provided all as shown on drawing and as directed.

(e) Material and labour for removing unserviceable bottom plywood of bed by Supply and fix new bottom made out of 9 mm thick plywood commercial BWR grade ISI marked all as shown on drawing.

(f) Material and labour for removing unserviceable stiffener by Supply and fix new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(g) Material and labour for removing unserviceable PVC hard shoes from bed by Supply and fix new PVC rubber shoe of superior quality as per sample approved.

(h) Preparation of old decorated / new replaced parts /surface of bed box type smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed with box type MEC 174

(a) Material and labour for removing unserviceable plywood top of bed and Supply and fix new top made out of 12 mm thick plywood commercial BWR grade ISI marked of size 838x965mm all as directed and as shown on drawing.

(b) Material and labour for removing unserviceable head board of bed by Supply and fix new Head board made out of Block Board 32mm duly fixed with 1mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be provided all all as shown on drawing and as directed.

(c) Material and labour for removing unserviceable foot board of bed by Supply and fix new Foot Board made out of Block Board 32mm duly fixed with 1mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be provided all all as shown on drawing and as directed.

(d) Material and labour for removing unserviceable side rail plywood of bed by Supply and fix new side rail made out of 9 mm thick plywood commercial BWR grade ISI marked duly fixed with 1mm thick decorative lamination teak veneer finished ISI marked including 1st class teakwood support free from knots and cracks shall be provided all as shown on drawing and as directed.

(e) Material and labour for removing unserviceable bottom plywood of bed by Supply and fix new bottom made out of 9 mm thick plywood commercial BWR grade ISI marked all as shown on drawing.

(f) Material and labour for removing unserviceable stiffener by Supply and fix new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(g) Material and labour for removing unserviceable PVC hard shoes from bed by Supply and fix new PVC rubber shoe of superior quality as per sample approved.

(h) Preparation of old decorated / new replaced parts /surface of bed box type smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed with ply board MEC 175

(a) Material and labour for removing unserviceable plywood top of bed by Supply and fix new top made out of 12 mm thick plywood commercial BWR grade ISI marked all as shown on drawing.

(b) Material and labour for removing unserviceable centre stiffener of bed by Supply and fix new stiffener dove tailed made out of 1 st class teak wood free from cracks and knots all as shown on drawing and as directed.

(c) Material and labour for removing unserviceable PVC hard shoes from bed by Supply and fix new PVC rubber shoe of superior quality as per sample approved.

(d) Preparation of old decorated / new replaced parts /surface of bed with ply board smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed with ply board MEC 185

(a) Material and labour for removing unserviceable plywood top of bed by Supply and fix new top made out of 12 mm thick plywood commercial BWR grade ISI marked all as shown on drawing.

(b) Material and labour for removing unserviceable head board of bed by Supply and fix new Head board made out of Block Board 30mm duly fixed with 1.5mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be provided all all as shown on drawing and as directed.

(c) Material and labour for removing unserviceable foot board of bed by Supply and fix new Foot Board made out of Block Board 30mm duly fixed with 1.5mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be provided all all as shown on drawing and as directed.

(d) Material and labour for removing unserviceable long rail of bed by Supply and fix new long rail (overall size 40mm) made out of Block Board duly fixed with 1.5mm thick decorative lamination teak veneer finished including 1st class teak wood beading free from knots and cracks shall be provided all all as shown on drawing and as directed.

(e) Material and labour for removing unserviceable stiffener by Supply and fix new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(f) Material and labour for removing unserviceable PVC hard shoes from bed by Supply and fix new PVC rubber shoe of superior quality as per sample approved.

(g) Preparation of old decorated / new replaced parts /surface of bed with ply top smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed hard box type, Table computer, Table dinning, Table peg, Side board, Book case, Table 90 x 60 with drawer, Table dressing gents, Table dressing ladies, TV/VCR Cabinet, Stool dressing, Table writing, Teapoy,

(a) Material and labour for removing the unserviceable/broken laminated sheet 1 mm thick and Supply and fix new laminated sheet 1 mm thick with approved adhesive complete all as specified and directed.

Dressing Stool C3/MEC/SP/205

(a) Material and labour for removing unserviceable cushioned seat of stool by Supply and fix new 50mm thick cushioned of 32 density covered with tapestry cloth superior quality as per sample approved shall be provided all as shown on drawing and as specified.

Hat stand with mirror FD 233 (M)

(a) Material and labour for removing old unserviceable mirror with frame by Supply and fix new 5mm thick electro-copper plated mirror of including 1 st class well seasoned teak wood beading free from cracks and knots all as shown on drawing and as specified.

(b) Material and labour removing old unserviceable front teak plywood from frame by Supply and fix new front plywood 4mm thick one side teak face commercial BWR grade ISI marked all as specified and as shown on drawing.

(c) Material and labour removing old unserviceable back ply from frame by Supply and fix new back plywood 4mm thick commercial BWR grade BWR grade ISI marked all as specified and as shown on drawing.

(d) Material and labour removing old unserviceable brass pegs from frame by Supply and fix brass pegs of superior quality of size 120 x 75 mm with brass screw as per sample approved all as specified and as directed.

(e) Preparation of old decorated / new replaced parts /surface of hat stand with mirror smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

TV VCR Cabinet MEC-176

(a) Material and labour for removing unserviceable castor wheel of cabinet by Supply and fix new castor wheel of superior quality as per sample approved all as shown on drawing and as directed.

(b) Material and labour for removing unserviceable back ply of cabinet by Supply and fix new back ply made out of 6 mm thick plywood commercial BWR grade ISI marked all as shown on drawing and as specified.

(c) Preparation of old decorated / new replaced parts /surface of TV VCR cabinet smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Stool dressing FD/E6/MAP/14

(a) Material and labour for removing unserviceable cushioned from seat of stool by Supply and fix new 50mm thick cushioned of 32 density covered with Tapestry cloth as per sample approved shall be provided all as shown on drawing and as specified.

(b) Material and labour for removing unserviceable plywood seat of stool including by Supply and fix new 12 mm thick BWR grade commercial plywood ISI marked all as shown on drawing and as specified.

(c) Material and labour for removing unserviceable hard rubber shoe of stool by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.

(d) Preparation of old decorated / new replaced parts /surface of stool dressing smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

M/s National Traders (BID ID -3485100)

GAJANAN SALES CORPORATION (BID ID -3480229)

MISHON TRADING CORPORATION (BID ID -3484465)

Mahesh Traders (BID ID -3482120)

shekhar & company (BID ID -3490044)