Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.3 LAccepted-AOC SREE COLONY BAGDOGRA PO BAGDOGRA DIST DARJEELING WB | L1 | Accepted-AOC Accepted | |
| 2 | L2₹49.8 L+₹1.2 L (2.50%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹49.9 L+₹1.3 L (2.66%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹50.8 L+₹2.2 L (4.43%)Rejected-Finance C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹51.1 L+₹2.5 L (5.10%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
REPAIR MAINT OF BR WORKS IN MES INSTALLATION AT SEVOKE ROAD STN UNDER GE SEVOKE ROAD
2023_MES_600258_1
8232/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹90,000
Yes
30 Jun 2023
1 Jun 2023
24 Jun 2023
1 Jun 2023
22 Jun 2023
16 Jun 2023
2 Jun 2023 - 10 Jun 2023
Amount
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed
S&F rolled mild steel sections any type including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE -290 Gde E-165 complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer newly primed steel surfaces exceeding 10cm in width or girth complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge any thickness as in roofs complete all as specified and directed.
S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
Demolition of cement concrete in ground floors and paving n.exc 15 cm thick (below or above ground level) unreinforced complete all as specified and directed
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded mechanically crushed stone aggregate) as in sub base of flooring complete all as specified.
Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed works complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/hard standing finished cement concrete surface fair and even complete all as specified and as directed.
M&L for broken stone boulders Hardcore of gauge exc. 63 mm, but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
S& F 2nd class hard wood (SAL) scantling clean sawn fixed work and fixed in position complete as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified.
M&L for brick work old size with fly ash brick straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks, as in half brick thick wall built in CM (1:4), complete all as specified and directed.
Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubbing down with water etc of any thickness including Dado any description complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for 20 mm thick rendering on fair faces of brick or concrete surface in CM 1:4 in two layers of 10mm each using water proofing compound on top layer only including finishing the surface even and smooth complete all as specified and directed.(WPC shall be measured and paid separately)
Supply only water proofing compound (integral) complete all as specified and as directed.
M&L for rendering 5 mm thick in CM 1:3 as in ceiling, finished the surface even and smooth complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of weather resistant acrylic emulsion paint over a coat of primer copmlete all as specified and directed
M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat alkali resistant primer applied over 1mm thick wall care putty complete all as specified and directed
Taking down old fencing barbed wire complete all as specified and as directed.
M&L for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossing with and provision of galvanished MS wire, staples or steel pins etc (Each line wire to be measured separately.) Complete all as specified and directed.
S & F mild steel angles or tee sections, fixed independently , without connecting plates etc as in splited end fencing post Fe 410-W (Gde-E-250) quality A including drilling holes complete all as specified.
S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be filled with washers and one hexagonal or square nut 5 to 10mm dia shank and exc 5cm but n exc 10cm long all as specified and as directed.
Supply only chain link fencing with 4mm dia galvanised steel wire ,size of mesh 100mmx100mm complete all as specified.
Fixing only chain link fencing including line wires , any mesh, size and type to any type of standard, rails , straining bolts, etc including provision of binding wire complete all as specified.
S&F mild steel flat iron (conforming to Fe -290, Gde-165) for securing fencing post including drilling holes, for screwing bolts etc complete all as specified.
M&L for preparation of new steel and iron surfaces of any description any in width or girth not otherwise described and applying two coats of aluminium paint over priming coat of red oxide primer complete all as specified and as directed.
S&F for mild steel round bars 10mm dia and over, cut ot lenght, bent to shpe requied, including cranking bending and fixing with chain link fencing with suitable arrangement complete all as specified and directed.
Dismantling struts (wood or RCC)any section including taking out embeded portion and making good distrubed portion posts embedded in concrete. Complete all as specified and directed.
Excavation in post hole each n.exc. 0.5 cum and getting out in soft/loose soil incl returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering removing surplus soil to a distance n.exc 50m and making good surfaces complete all as directed.
M&L cement concrete 1:3:6 type C2(using 40mm graded crushed stone aggregated) as in foundation filling and mass concrete complete all as specified.
M&L for Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded crushed stone aggregate) In precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.
M&L for Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded crushed stone aggregate) In precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and n.exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer complete as specified and directed.
M&L applying 1-2 mm mm thick wallcare putty on wall complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered surface and applying one coat of distemper of any tint on walls complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats of weather exterior emulsion paint over one coat of primer on walls complete as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete as specified and directed.
Taking down chowkats with shutters(without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified and directed.
Taking down chowkats with shutters(without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.
S&F steel rolling shutters of lath thickness 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete but gear operated type with bevel gear box and crank handle complete all as specified and as dircected.
S&F steel rolling shutters of lath thickness 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type complete all as specified and as dircected.
S&F lever locks mild steel with 4 levers for rolling shutters as specified and as directed.
S&F ball bearing for rolling shutters complete all as specified and as directed.
S&F pressed steel frames (size-105X60mm) for doors with one or more rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chome primer complete all as specified .
S&F pressed steel frames (size-125X60mm) for doors with one or more rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chome primer complete all as specified .
S & F flush sutters, 30mm thick solid core contruction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.
Supply and fixing 2nd class hard wood factory made 35mm thick glazed skeleton shutters, open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.
S&F 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.
S&F 200mm size aluminium, anodised barrel tower bolt of extruded section ISI marked complete as specified and directed.
S&F aluminum handles, cast type, anodized 200mm long complete as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
S & F steel ventilators with top hung shutter including hinges,steel peg stay, including one shop coat of Zinc Chrome primer complete all as specified.
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165. Complete all as specified and directed.
S&F collapsible steel gates top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runners with hold fasts and brackets complete all as specified and as directed.
M&L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required area not exc 150 sqcm including making good to existing finishes complete all as specified.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as specified.
All as per item No. 61 above but without glazing bars for gauzed shutter including one shop coat of Zinc Chrome primer complete all as specified and directed.
S&F sheet glass ordinary quality 3mm thick and glazing with oil putty and securing pins not exceeding 0.50sqm each pane complete all as specified and directed.
S&F flat iron (mild steel) fillets fixed to fly proof steel window shutters with screws or riveted for securing wire gauze, etc and as in wind ties for roof complete all as specified and directed.
Drilling holes as per specififed Depth of the surface. Fix the PVC and fix it with fosroc renderoc plug, rapid setting cement based plugging mortar. Injecting cement slurry admix with Fosroc cebex 100, Plasticised expanding grout admixture @ 0.225 Kg per bag of cement and Fosroc Nitobond SBR Latex, @ 5 Lites/50 Kg cement, through the prefixed nozzles under pressure using suitable grout pump to fill all possible pores complete all as specified.
Identify the cracks and construction joints , honeycomb areas, shall be chased open into 'U' groove shape and sealed with High strength, fiber based cementitious mortar, Fosroc Renderoc SP40. Providing and fixing 6-8 mm dia nozzle along the joints and honeycomb areas after proper surface preparation. The injection of conbextra EP10 through the nozzle till the refusal of the grouting materials complete all as specified.
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
M&L for non skid ceramic coloured tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.
M&L for glazed coloured ceramic tiles of size 450x300x 7mm thickness in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 10 mm thick backing layer of CM 1:3 for fixing of tiles on wall complete all as specified and as directed
M&L for chequered cement concrete tiles 30cm30xcmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M& L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. Note:- Consolidated thickness shall be measured.
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed. Complete all as specified and as directed
S&F in repair vitreous china squatting pan "ORISSA" pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding complete all as specified and directed.
S&F in repair vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.
Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) complete all as specified.
M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) nominal mix as in slab supported on walls, beams, shelves and the like etc complete all as specified and as directed.
M&L RCC 1:2:4 , type B1, (20mm graded crushed stone aggregate) nominal mix as in cantilever, bressummers, lintels over 1.5m clear span complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.
M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.
S&F in repair Bip tap standard of PTMT any colour screwed for iron pipe 15 mm bore and fixed (Minimum weight - 90gms) complete all as specified and directed.
S&F in repair Pillar tap standard of PTMT any colour screwed for iron pipe 15 mm bore and fixed (Minimum weight - 110gms) complete all as specified and directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exceeing 0.50 sqm in each pane complete all as specified and as directed.
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repair PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it's complete accessories, including connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and as directed.
S&F in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified.
S&F in repair PVC connections 15 mm size and 450 mm long complete all as specified and as directed.
S&F in repairs CP brass towel rail 60cm long including fitting complete all as specified and directed.
M&L for Cutting chases in brick walls pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed.
S& F in repair 15 mm bore stop valve (male or female thread) cast copper alloy fancy type chromium plated with long shank and cup (concealed type) with capstion head wall flange etc screwed down screwed for iron pipe and fixed in repairs complete all as specified and directed.
S& F in repair 15 mm bore Angle stop cock (male or female thread) cast copper alloy, chromium plated fancy type with capstan heads, wall flange screwed down screwed for iron pipe complete all as specified and directed.
S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40gms) complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S&F PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.
S&F PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.
S&F PVC (SWR) 110mm Junction (Single T) equal or un equal provided with access door complete all as specified and directed.
M&L PVC (SWR) floor trap plain with grating including jointed with solvent cement of diametre 75mm complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110mm setting and jointed with solvent cement complete all as specified and directed.
Demolition and breaking up drain pipes 150mm (salt glazed stone ware , AC or reinforced concrete) set in cement mortar and removing from site of work to a distance n.exc 100mtr complete all as specified and directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.
M&L for DWCPE pipe 150mm bore (SN-8) laid in trenches and jointed as per manufacture specification and tested on completion all as specifed and as directed.
M&L for 100 mm thick PCC (1:3:6) type C-2 (using 40 mm graded mechanically crushed stone aggregate as in sub base of flooring complete all as specifed and as directed.
M&L for cement concrete 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as in surface channels and drains including providing necessary formwork complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
S&F in repair Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) 0.71mm thickness including fixing clamps of FI 30x 6mm of appropiate shape and size to be fixed at prescribed distance complete all as specified and directed.
Demolition of wall and ceiling boards any thickness including cover fillets complete all as specified and directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
Roughening surfaces of existing roof treatment and taking out of old APP membranes and removing from site including cleaning and washing down with water to remove dust, etc and brushing neat cement slurry @3 kg/sqm complete all as specified and as directed by Engineer-in-charge.
M&L for 10 mm thick rendering in CM (1:4) over RCC roof surface to receive roof treatment finished even and smooth without using extra cement mixed with water proofing compound as per manufacturers instruction (WPC shall be measured and paid separately).
M&L for priming the roof surface by applying 0.40 ltr per sqm of bituminous primer conforming to IS-3384 for water proofing treatment applying evenly a coat of bituminous primer complete all as specified.
M&L for APP based polymeric membrane minimum weighting 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by forced (torch) application. Side over laps shall be minimum 75mm and the end laps shall be minimum 100mm and sealing of all over laps & joints as per manufacturers instructions complete all as specified.
Cutting/Racking out existing filling in expansion joints, construction joints,15 mm wide dummy joints upto 30 mm depth including scrubbing of joints with diamond cutter machine(Heavy duty) to remove sticking sealing compound from the sides and top of joints and totally cleaning the top surface of joints with brush and finally fanning with compressed air to make the joints free from all loose materials ie dirt/dust etc to entire satisfaction of Engr-in-Charge, applying with provision of bond breaker tape on bottom of joint and filling depth of joint with provision of polyethylene back up rod of suitable dia to ensure tight packing so that no gap or voides exist at the top of backer rod. The deteriorated edges of concrete joints (included upto 50mm either sides of the joints) shall be made good to true line with provision of polymer concrete. Joints (10mm to 15mm wide) shall be sealed with provision of polyethylene base sealant using Rallithane/Colpor-200of M/S Fosroc chemical (India) Pvt Ltd/Seal N Flex FC polyethylene joint sealant manufurered by BOSTIK INDIA PVT LTD and with primer N-49 and filling the joints with Polyurethane based sealing compound as laid down in manufacturers instructions and as directed by Engr-in-Charge. Minimum clear depth of sealant above back up Rod shall be 10mm complete all as specified and as directed. NOTES:-(i) Size of joints shall be made by cutting in case not available at site. (ii) If width of joints by cutting exceeds as specified above, the same shall be filled by polyethylene based sealant and no extra payment shall be made. (iii) Remaining depth at bottom (after keeping provision for back up Rod & sealant) shall be filled with sand and cost of same shall be deemed included in item rate quoted by tenderer. No extra payment for provisioning of sand(if any) shall be made. (iv) Marking tape shall be applied on edges of joint to prevent accidental slippage of sealant and shall be removed after filling with sealant. Cost of the same shall be deemed included in item rate quoted by tenderer. (v) Make of sealant shall be Rallithane/Colpor-200of M/S Fosroc chemical (India) Pvt Ltd/Seal N Flex FC polyethylene joint sealant manufurered by BOSTIK INDIA PVT LTD and with primer N-49 as laid down in manufacturers instructions including marking tape 40mm wide on both edges joint before filling the joint and removing the tape immediately after applying sealant, or equivalent as approved by Accepting Officer.
M S ALOK SAHA
TAPASH SAHA
MARWA CONSTRUCTION
D.D. BROTHERS
Raj Enterprise
M/S SUBRATA JOARDAR
BIJAN KUMAR DHAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .