ADDITION ALTERATION TO LEAN BUILDING P 220 INAS 339 PROVISION OF HARDSTANDING CONNECTION FOR STOWAGE OF DG SETS INAS 310 INS HANSA PROV OF WASHROOM WITH OVERHEAD TANK ACCESSORIES STRUCTED EJECTION BAY NAY GOA UNDER AGE BR I AGE EM I OF GE NW VASCO

Amount

ADDITION / ALTERATION TO LEAN BUILDING (P-220) AT INAS 339, INS HANSA, UNDER GE (NW) VASCO. (B/R PORTION)

Demolition of stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles.

Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6

RCC Nominal mix Type B1 1:2:4 (20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars.

M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for rendering 15 mm thick on block masonry surfaces or other than fair faces of brick work in cement mortar 1:4. finished to even and smooth (without using extra cement)

M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with 3% integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately.

Supply only water proofing compound

M&L complete removal of existing treatment and Preparing old plastered ceiling surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling.

M&L complete removal of existing treatment and Preparing old plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall.

M&L Preparing new plastered wall surfaces and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall

M&L Preparation of new plastered surface and applying two coats of weather proof high glove antifungal paint on external surface with suitable primer

Dismantling floor / wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises

M&L screed bed or bedding layer of mortar 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles.

M&L Vitrified Ceramic tiles of light shade 10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors / skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Rendering 10mm thick in 1:6 CM on fair faces of block work or concrete surfaces to receive glazed tiles

Glazed coloured ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Granite 20 mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with ANF (Board) edge tiles with Armstrong 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 90%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 34%.The tile shall be laid on Armstrong Prelude38 with 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15.34Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 10 year warranty all as directed by Engineer in Charge.

S&F Toughened glass door with toughened glass of 12 mm thick fixed with floor spring, hold & open function, 300 mm long stainless steel pull handles,hydraulic door closer, locking arrangements incl all necessary fittings and frameworks. Design: Blumcraft's series 1301 or 640c or equivalent as approved by GE.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of internal flooring/plinth protections, etc.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment

M&L 50 mm thick Sand filling under floors or in foundations including watering and consolidation

S&F powder coated aluminium door and window shutter and frame any type (sliding or openable) and other similar work etc 60 micron powder coated section, fabricated by using the JINDAL / INDAL / HINDAL CO / CENTURIAN sections including all necessary roller wheels for window, cleats , handle, door stoper locking arrangement and arrangements to received glass/ prelaminated particle board with aluminium beading and stainless steel screw incl cost of rubber gasket beadings etc complete sealing between frame & wall with epoxy sealing compound. (The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass and prelaminated particle board will be measured and paid seperately) All sections as approved by GE.

S&F Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including stranded aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and directed

S&F 4mm thick sheetglass ordinary quality exceeding 0.5 sqm each pane

Solar control film 50 micron reflective type mirror finish/mirror jet black type(gareware sun control or equivalent)

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia .

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20 mm.

Dismantling of cast iron/AC drain pipes jointed in cement mortar

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 75 mm bore PVC (SWR) bends of any radius.

Dismantling plain or corrugated AC sheeting any gauge, thickness in roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed

M&L Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engineer-in-Charge.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confrming to Fe 410-W including cleats, distance pieces etc

Preparation of new steel surfaces and applying two coats of epoxy anti corrossive paint over a coat of zinc primer

M&L for preparation of old steel surface and applying one coat of Epoxy anticorrosive paint over 10 cm width or girth.

S&F 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work with all fittings as per direction and specifications.

ADDITION / ALTERATION TO LEAN BUILDING (P-220) AT INAS 339, INS HANSA, UNDER GE (NW) VASCO. (INTERNAL ELECTRIC SUPPLY)

M & L in replacement of Point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multistranded copper conductor cable in and including PVC casing caping ISI marked including fittings and accessories with continues PVC insulated copper cable with copper conductor of same size as in phase/ neutral/ earth cable connecting to common earth dolly including (metal box, PVC modular plate for mounting swiches, socket, regulator etc) complete all as specified and directed by Engineer-in-Charge

a) for light controlled by one way switch

b) for fan point controlled by one way switch

c) for 5 Amp Socket point on same board

d) All as per Srl item No. 1.46 above but 5 Amp point on independent board

S & F in repairs for modular switch one way 6 amps.

S & F in repairs for fan step regulator, 120W - 2 module

S&F ceiling rose 3 terminal 230 volts, PVC polycarbonate, isolated body completed all as specified and directed.

S & F in repairs modular sockets 6A- 2/3 pin combined 2 module,

M&L for point FRLS/LS wiring with cable size 2.5 Sq mm nominal area PVC insulated and unsheathed cable single core multistranded, copper conductor in PVC casing caping ISI marked for one 3 pin, 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed by Engineer-in-Charge.

S & F in repairs modular sockets 6A/16A- 2/3 pin combined 2 module,

S & F in repairs for modular switch one way 16 amps.

Taking down Ceiling /Exhaust fan, cealing cable end, dismantling blades and removing fan and blades to store all as specified and directed.

M&L for painting of ceiling/exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Supply & fix ceiling fan 1200 sweep, 50 W, 340 RPM suitable for air delivery of 210 CMM alongwith downrod of 266-300 mm length complete all as specified and directed by Engineer-in-Charge.

S & F MCB SP 6 to 32 Amps 240 Volts all as specified and directed by Engineer-in-Charge.

S & F MCB SPN 6 to 32 Amps 240 Volts all as specified and directed by Engineer-in-Charge.

S & F MCB DB SPN 12 ways sheet steel enclosure, phospetised, powder coated with double door, 415 Volt all as specified and directed by Engineer-in-Charge.

S & F Food Light 30W, 230V Energy saving environmental friendly, long life, exclusive innovative die-cast aluminium diffuser with high power LED as light source, suitable for highlighting architectural features of area lighting suitable for rough service

M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC Casing Caping, including accessories fixed on wall/ceiling all as directed including making good of disturbed surfaces area.

M & L Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate n. less than 1.5 mtr below ground level connected to galvanized iron wire 4 mm as earthing lead by means of blots, nuts, check nut and washer of galvanized steel, including necessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and light grade GI pipe 40 mm dia pipe of required length for protection of GI wire and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR part - I and all directed including connections and testing on completion.

S & F DB mounted MCB type indicating lamp single phase Red / Yellow / Blue.

S & F in replacement LED Panel 2' x 2' recess mounting luminaire suitable for armstrong/grid/ Pop ceiling complete with separate electronic driver & high brighteness SMD Leds complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output Voltage stabilized at 230V with accuracy of ± 2.5% and of capacity 4.0 KVA Complete as specified.

Supply and fix water cooler made of fully stainless steel electric driven (single phase), having approx storage capacity of 40 litre and nominal cooling capacity of 40 Litres per hour.

Point wiring with 4 Sqmm (nominal area) PVC insulated unsheathed multistranded copper conductor cable in and including PVC concealed conduit medium grade ISI marked including fittings and accessories with continues PVC insulated copper cable with copper conductor of same size as in phase/neutral/earth cable connecting to common earth dolly including cast iron or pressed steel terminal box and including plastic laminated sheet top cover for mounting of switches sockets fan regulators etc. for one light/ fan point controlled by one switch through regulator complete.

S & F 20/25 Amps motor starter switch with overload protection, ideal & safe for air conditioners cooler, water pumps, refrigerators Mixer and all type of appliances completer all as specified and directed by Engineer-in-Charge.

S & F 20/25 Amps Power unit combo MCB protected socket with top, ideal & safe for air conditioners cooler, water pumps, refrigerators Mixer and all type of appliances completer all as specified and directed by Engineer-in-Charge.

S & F in repairs for modular switch one way 16 amps.

PROVISION OF HARDSTANDING AND CONNECTION FOR STOWAGE OF DG SETS AT INAS 310 AT INS HANSA, UNDER GE (NW) VASCO ( BR PORTION )

Excavating in post holes ( or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubbel mixed with earth around, in layer not 3xceeding 25 cm soft/disgrated

Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.

S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-290 (Gde E-165)

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as in ridge

M&L preparation of new steel surface of any description over 10cm width or girth applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/disintegrated rock

M&L for hardcore of broken stone gauge exc 63mm but n exc 100 mm , deposited, spread and leveled in layer n.exc 15cm thick, watered and rolled / rammed to a true surface under PCC Platform .

M & L cement concrete type C-2, 1:3:6 (40mm gradeded aggregate), 75mm thick as in subbase floorings complete all as specified.

M & L Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified.

Preparation of new plaster surface & applying three coat white wash on wall complete all as specified.

M&L plain cement concrete type C1 (1:3:6) using 20 mm graded aggregate in surface channel/drain.

PROVISION OF HARDSTANDING AND CONNECTION FOR STOWAGE OF DG SETS AT INAS 310 AT INS HANSA, UNDER GE (NW) VASCO. ( E/M PORTION )

Supply, laying, testing and commissioning LT Cable XLPE insulated, galvanised steel strip armoured, 1100 volts grade, multistranded aluminium conductor cable of cross sectional area 35 sqmm; 3.5 core conforming to IS:7098 Part-I with latest amendments upto date and making cable connections by providing suitable aluminium lugs with proper crimping and steel glands and laid in trenches / ducts / floors / roofs or through pipes with saddles and fixing screws etc complete all as specified and directed. Note :- 1. Excavation, Concrete cable protection cover and Clear Sand for cushioning will be measured and paid separately. (b) Cost of glands, aluminium cable lugs (eye lid / barrel / bottle neck type /ring type or any shape) new nut, bolt and washers of required size /description are deemed to include in this rate.

All as per item No. 2.15 here in before but of size 4 core 16 sqmm

Supply and fix in repair changeover swithcs on load changeover switches 4 pole 125 Amps in sheet steel enclosure with inclosure, including necessary spreaders/cable lugs/ gland /nut, bolt and washers if required complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCCB 4 pole 415 volts with adjutable type 125 to160 Amps with breaking capacity 25 KA in sheet steel enclosure with inclosure and including connecting of one incomming and three outgoing cables with suitable lugs, glands, nuts, bolts and washers all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with GI earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) filled with common salt and charcoal and connected to GI earth strip 32x 6 mm thick dia by means of GI nuts, bolts, & washers as shown in electrical plate No. 5 of SSR Part-I and Connected to earthing test point all as specified and including necessary PCC earth pit chamber of 1:3:6 and chamber cover of 50mm thick PCC 1:2:4 with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40 mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engineer-in-Charge including demolish existing earth pit taking out old materials.

M & L for sub main wiring with two run of single core 4 sqmm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing caping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc all as specified and directed by Engineer-in-Charge. Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit)

PROVISION OF WASHROOM WITH OVERHEAD TANK AND ACCESSORIES STRUCTED EJECTION BAY AT NAY (GOA) UNDER GE (NW) VASCO (B/R PORTION)

Excavation in trenches not exc. 1.5 m in depth and not exc 1.5 m wide in soft disintegrated rock for foundation and getting out

Returning, filling in with soft/disintegrated rocks, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material n.exc. 50 m and depositing/spreeding where disrected at a level n.exc. 1.5 m above the starting point.

PCC type D2 1:4:8 (40mm aggregate) in foundations filling and mass concrete

M&L RCC Type B1 1:2:4 , 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC Type B1 1:2:4, 20mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Type B1 1:2:4, 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L RCC Type B1 1:2:4, 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L Rendering 5 mm thick cement plaster on ceiling in CM 1:3 mixed with 3% integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately.

Providing 10mm thick plaster in CM (1:4) mixed with 3% integral water proofing compound over roof top surface finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid seperately

M&L for preparation of surface with wire brush and remove loose particle & laitance, wash with clean water, damaged or hollow portion, sharp edges etc. must be cut and removed till the morther slab. Fillig the cracks and damaged portion with polymer mortar and allow it to cure for 24 hrs. Brush apply the 1st Priming coat (Dr. Fixit primeseal or equivalant) on prepared concrete/plastered surface by diluting 2 parts of Primeseal with 1 (one) part of water and allow to dry for 04 (four) hours. Apply the first coat of waterproofing coating (Dr. Fixint Newcoat/ Waterseal Concentrate of M/s Krishna Conchem Products) withort any dilution at the rate of 2 Sqm per liter over the primed surface. On the wet surface of 1st coat overlay a open-woven fibre glass mesh, min 40 GSM of size 2mm x 2mm and allow it to soak completly. Immediately apply the second coat with a roller, to ensure complete coverage of the fibre mesh. Apply the third coat after 6 to 8 hrs once the second coat is dry. Drying time between coats will be 6 to 8 hours all as directed and as per manufacturers instructions.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

S&F Aluminium wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & directed.

S&F factory made solid panel Prelam PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded Prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F stainless steel butt hinge, 100mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section 150mm long

S&F Extruded aluminium alloy handles, fabricated type., anodised 150 mm in size .

Aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 25 mm.

Supply & Fixed PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor

Supply & Fixed PVC (SWR) bends 75 mm bore any radius.

Supply & Fixed PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints , laid in trenches or in floor .

Supply & Fixed PVC (SWR) bends 110 mm bore any radius.

Supply & Fixed PVC (SWR) Tee equal or unequal 110 mm bore any radius.

Supply & Fixed PVC (SWR) vent cowl 75 mm

Supply & Fixed PVC (SWR) vent cowl 110 mm

Supply & Fixed PVC (SWR) floor trap 75 mm outlet diameter, plain with grating including jointing with solvent cement.

Supply & Fixed fancy type bib taps, cast copper alloy,chromium plated, screwed down for 20 mm bore pipe.

Supply & Fixed PVC connection with PTMT nuts of length 450 mm

Supply & Fixed CP towel rail 20 mm dia , 60 cm long and and including chromium plated brass screws and wooden/plastic cleat.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F push tap chromium plated, cast copper alloy of screwed for iron pipe and fixed.

S&F Bottle trap of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms/ 40mm-270 gms)

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm all as specified and directed.

Supply & Fixed fancy type stop valve , cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed down for 20 mm bore pipe.

S&F fancy type Pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure screwed for 20 mm bore.

Supply & Fixed Chromium plated shower roses 125 mm size with or without swivel joints, including fixing to steel pipe or union

Supply & Fixed PVC valveless, syphonic action type, flushing cistern, low level, coloured, with inlet, ball valve, float and handle including brackets outlet flushing pipe of capacity 10 ltrs.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including seat cover (excluding fixing bolts, flushing cistern and flush pipe)

S & F under counter basin (Oval shape) of size 555 x 425 x 195mm including fixing accessories set (Cat No. FLS-WHT-5701) of Jaquar or equivalent

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position all as specified in SSR Part I .

Supply & Fixed Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) for 25 mm bore pipe.

M & L 100 mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in flooring/ hardstanding and finishing cement concrete surface even and smooth without using extra cement

SEPTIC TANK AND SOAK PIT

Supply and fix On site LDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. in conventional type, complete for 25 users

M & L PCC 1:3:6 type C1 (using 20 mm graded agg.) as in benching, like works, hold fast block incl. necessary form work complete all as specified and directed.

M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4

M&L for providing RCC type B1 1:2:4 (20mm graded stone agg) in precast reinforced wall or slab of any thickness set in CM 1:4 and fixed as directed.

M&L for TMT bars 6mm to 8 mm dia cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or scruing with clips all as specified & directed.

M&L for Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells all as specified & directed.

M&L for 150mm bore CI pipes with spigot and socket ends centrifugally cast class LA in any length laid in trenches

PROVISION OF WASHROOM WITH OVERHEAD TANK AND ACCESSORIES STRUCTED EJECTION BAY AT NAY (GOA) UNDER GE (NW) VASCO ( INTERNAL ELECTRIC SUPPLY )

S & F MCB DB SPN 04 ways sheet steel enclosure, phospetised, powder coated with double door, 415 Volt all as specified and directed by Engineer-in-Charge.

Supply and fix Intergral LED Street Light Luminaire 60 W comprising of pressure die cast aluminium housing powder coated in graphite grey and toughened glass and IP 66 protection including all accessories and connecting materials such as clamps, brackets, nut bolts, etc, and making electrical connection with copper cable all as specified and directed.

S & F LED bulkhead luminaires 10W, 240 volt .

Supply and fix in repairs LED mirror light fitting 1 x 10 Watts WW, operating voltage 140 V to 265 V indoor decorative aluminum die cast, IP 42, complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed by Engineer-in-Charge.

S&F Exhaust fan of size 300mm, 70W, 1400 RPM, with the air delivery of 1300 CMH complete all as specified and directed by Engineer-in-Charge.

S & F LED Batten with extruded aluminium housing and highend non yellowish diffuser to achieve glare & flicker free illumination for continuous.

PROVISION OF WASHROOM WITH OVERHEAD TANK AND ACCESSORIES STRUCTED EJECTION BAY AT NAY (GOA) UNDER GE (NW) VASCO ( EXTERNAL ELECTRIC SUPPLY )

Supply and lay cable XLPE insulated screended PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core.

Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in hard / dense soil, getting out and levelling of bottom surface to required level for laying UG cable / errection of poles / pipes all as specified.

Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in soft / disintegrated rock getting out and levelling of bottom surface to required level for laying UG cable / errection of poles / pipes all as specified.

Supply/ filling dry river sand/m-sand in trenches for cable protection All as SSR Part I. NOTE : Punned thickness only will be measured & Paid

Supply and laying un-reinforced precast concrete cable cover LV type 1 flate size 250 X 150 X 40 mm

M & L Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate n. less than 1.5 mtr below ground level connected to galvanized iron wire 4 mm as earthing lead by means of blots, nuts, check nut and washer of galvanized steel, including necessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and light grade GI pipe 40 mm dia pipe of required length for protection of GI wire and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR part - I and all directed including connections and testing on completion.

NOTE :- SIMILAR ITEMS OF ALL WORKS HAS BEEN CLUBBED)

M/s. R.S. LAWANDE

M/S G.N.POWAR

SACHIN CONSTRUCTIONS