Construction of 30 Bedded Rural Hospital at Vangaon , In Taluka Dahanu Dist. Palghar

Amount

Item No. 1: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Item No. 2: Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m)

Item No. 3: Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m)

Item No. 4: Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).

Item No. 5 : Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Item No. 6 : Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 7 : Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 8 : Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 9 : Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Item No. 10 : Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete.

Item No. 11 : Providing preconstructional antitermite treatment as per I.S.6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Item No. 12 : Providing preconstructional antitermite treatment as per I.S.6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Item No. 13 : Providing preconstructional antitermite treatment as per I.S.6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Item No. 14 : Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 15 : Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 16 : Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 17 : Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 18 : Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 19 : Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 20 : Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / granite /gneiss / quartzite metal for R.C.C. fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 21 : Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, chajjas, lintels pardis, copings, fins, etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Item No. 22 : Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete

Item No. 23 : Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Item No. 24 : Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.

Item No. 25 : Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/­ including ponding test etc. complete.

Item No. 26 : Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with POP finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No. 27 : Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Item No.28 : Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Item No. 29 : Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including inserting and designing of granite flooring, cement float, filling joints with neat cement slurry, curing, mirror polishing and cleaning etc. complete.

Item No. 30 : Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Item No. 31 : Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Item No. 32 : Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Item No. 33 : Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both side polish

Item No. 34 : Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Item No. 35 : Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Item No. 36 : Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish

Item No. 37 : Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring

Item No. 38 : Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting

Item No. 39 : Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

Item No. 40 : Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Item No. 41 : Providing and laying telephone black / Amba White /Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

Item No. 42 : Providing and fixing alluminium corner guard plates for edges of walls including supplying material, fixing in line and level etc. complete.

Item No. 43 : Providing and applying two coats of appex Appex Ace white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Item No. 44 : Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface including primer coat etc. complete.

Item No. 45 : Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.

Item No. 46 : Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Item No. 47 : Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mmx44.5 mmx 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete

Item No. 48 : Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Item No. 49 : Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Item No. 50 : Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.

Item No. 51 : Providing and fixing single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of Ghana T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.

Item No. 52 : Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box

Item No. 53 : Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer­ in­charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box

Item No. 55 : Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Item No. 56 : Providing and fixing aluminium grill`(5.13 Kg/Sqm) decorative of various sizes as per detail drawing and specification etc. complete. (Prior permission to be obtained from S.E. before execution of this item) ( 5.13 Kg/Sqm)

Item No. 57 : Design, supply, fabrication structural glazing system incorporation alluminium mullion (63 milimetre x 38 milimetre x 2milimetre and weight 1.51 kilogram/meter) and the tansom section (63 milimetre x 38 milimetre x 2milimetre thick and weight 1.51 kilogram/meter) and shash section duly anodised (20 to 25micron) with all necessary fittings, fixtures, screws and hardware along with structural / weather sealant i.e. Dow corning /GE / or equivalent should be so designed by withstand dead load and wind load as per Indian standard IS 875 ( Part -3) 1987 and it should also be provided with specially designed drainage chamber to prevent the water leakage inside the building including required all strctural steel etc. complete.

Item No. 58 : Providing & fixing on walls/ ceiling/ floors, heavy grade having embossed as ISI Mark galvanised iron pipes of required weight in Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti­corrosive oil paint 2 coats complete.

A. 15mm dia. ( 1.25 kg/rmt )

B. 20mm dia. ( 1.63 kg/rmt )

C. 25mm dia. ( 2.49 kg/rmt )

D. 50mm dia. ( 5.17 kg/rmt )

Item No. 59 : Providing and laying in trenches 40 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of 3.68 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti­corrosive oil paint , 2 coats complete.

Item No. 60 : Providing and fixing 25mm diameter water meter with nonreturn valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Item No. 61 : Providing and fixing screw down bib/ stop tap of brass including necessary socket union nut complete. (BRAND ­ HINDWARE/ JOHNSON/ PARRYWARE/ VIENA/ AMERICAN STANDARD)

A. 15mm dia.

B. 20mm dia.

C. 25mm dia.

Item No. 62 : Providing and fixing screw down wheeled stop tap of brass including necessary sockets/union nut complete. (BRAND ­ HINDWARE/ JOHNSON/ PARRYWARE/ VIENA/ AMERICAN STANDARiv)

A. 15mm dia.

B. 20mm dia.

C. 25mm dia.

Item No. 63 : Providing and fixing coloured glazed earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia. P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection up to the outside face of the wall. (BRAND ­ HINDWARE/ JOHNSON/ PARRYWARE/ VIENA/ AMERICAN STANDARiv)

Item No. 64 : Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (BRAND ­ HINDWARE/ JOHNSON/ PARRYWARE/ VIENA/ AMERICAN STANDARiv)

Item No. 65 : providing and fixing oval type under counter wash hand basin of 16 inchx22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle ­ Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete.

Item No. 66 : Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75x40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.

Item No. 67 : Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Item No. 68 : Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete.

Item No. 69 : Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Item No. 70 : Providing and laying salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

A. 100mm dia.

B. 150mm dia.

Item No. 71 : Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Item No. 72 : Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover.

Item No. 73 : Providing & constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover.

Item No. 74 : Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.

Item No. 75 : Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.

Item No. 76 : Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use)

Item No. 77 : Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Item No. 78 : Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres

Item No. 79 : Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

Item No. 80 : Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M­15 cement concrete block 60cm x 30cm x 30cm & painting the ladder complete.(Anti Corossive Paint)

Item No. 81 : Providing and fixing 90 cm. x 60 cm. Granite plate engraving 10cm. height letter, figures including painting the lefters/figures with approved colour and shade complete.

Item No. 82 : Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Item No. 83 : Supplying and mixing of 3 inch (75mm) coloured concrete system IPS/Broom finish by Bomanite India pre dispersed, UV stabilised, integral colour bag as per shade Group-2 ( Apricot, Coal gray, Cool mauve, comstack, Golden rod, Granola, Gunmetal gray, Maize, Rust green, Parika, Red clay, Siena, Thristie brown ) one bag/m3 concrete finishing either IPS plain finish or broom finish including laying & finishing. Providing and applying Bomanite India Acrylic sealer coat to the area after curing applying first coat of sealer, using either spray pump, brush or roller@ 80 sft per litre. After complete drying of first coat applying second coat @ 80 sft per litre. Allowing to dry for at least 4 hours etc. job complete. i) M-30 ready mix concrete ii) Five years warranty for colour fastness only iii) Pre monsson and post monsoon inspection should be done by Executive Engineer.

Item No. 84 : Providing and fixing of precoated galvinized steel profile sheet ( confirming to IS 14246 ) of TATA / JINDAL or eqivalent make (size, shape & pitch of corrugation as approved by Engineer-in-charge) 0.50mm (-/+ 0.05%) total coated thickness with zinc coating minimux 120 gms per sq.mtr. as per IS 277, in 240 mpa steel grade, 5-7microns eppoxy primer on both side of the sheet and polyster top coat 15-18 micorns and bottom minimum 7 microns. Sheet should have protective guard film of 25 micorns minimum to avoide scratches during transportation and should be supplied in single length upto 12.0 meters or as directed by Engineer-in-charge. The sheet shall be fix using self drilling / self tapping screws of size(5.5 x 5.5mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required

Item No. 85 : Providing uncoursed rubble masonry of trap/ granite/quartzite /gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/in plinth of external walls including bailing out water manually, striking joints on unexposed faces and watering etc.complete.

Item No. 86 : GARDEN SOIL Supplying on site garden soil well sieved 90% to pass through I.S. sieved of 10 mm size free from stones rubbish like dried grass roots and other such materials . The soil should be fresh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box.(Farma).

Item No. 87 : Preparing Carpet Lawn Excavating the ground up to 30cms, removing unwanted stuff. Mixing & filling garden soil & manure in 2:1 proportion. Planting Carpet/ Jumping/ Doob variety of Lawn grass as directed & maintaining till well established by watering, weeding, etc. complete.

Item No. 88 : Preparing Edging or Border Excavating the ground to a required depth of 20cms, in the required area .removing & conveying unwanted stuff ,rubbish to a required distance as directed. Filling Excavated part with fresh garden soil / silt & manure in 3:1 proportion to a required height of 20 cms. Mixing fresh garden soil / silt & manure thoroughly well ,Levelling, watering on previous night, planting Unrooted cutting as directed of 15 cms.apart watering and maintaining till well grown to the stage of prunning,etc. complete.

Item No. 89 : Preparing Flower Bed Excavating the ground to a required depth of 30cms, in the required area .removing & conveying unwanted stuff ,rubbish to a required distance as directed. Filling fresh garden soil / silt & manure in excavated area in 3:1 proportion to a required height of 30 cms. Mixing fresh garden soil / silt & manure thoroughly well ,Levelling, watering on previous night, planting seedling of required annuals 25 cms apart . maintaining till well established by watering, weeding, stirring replacing of casualties etc. complete.

Item No. 90 : Preparing Ground Covers Excavating the ground up to 20cms, removing unwanted stuff. Mixing & filling garden soil & manure in 3:1 proportion. Planting suitable ground cover variety as directed & maintaining till well established by watering, weeding, etc. complete.

Item No. 91 : Preparing Canna Bed Excavating the ground to a required depth of 30cms, in the required area .removing & conveying unwanted stuff ,rubbish to a required distance as directed. Filling fresh garden soil / silt & manure in excavated area in 3:1 proportion to a required height of 30 cms. Mixing fresh garden soil / silt & manure thoroughly well ,Levelling, watering on previous night, planting well developed Canna rhyzomes 40 cms apart. maintaining till well established by watering, weeding, stirring replacing of casualties etc. complete.

Item No. 92 : Planting small and medium size ornamental / Flowering plants Digging pit with size 0.6x 0.6 x0.6 m. removing & conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil / silt & manure upto a height of 0.3 m.in 3:1 proportion. Mixing soil & manure thoroughly well levelling , watering previous night, planting one to two year old healthy trees sapling as per specifications. Maintaining till well established by watering, stirring of soil and manure , replacing of casualties etc. complete.

Item No. 93 : Providing and fixing alluminium louvers in elevation including providing rectangular alluminium section vertically of size 150mm x 50mm x 3mm at 125mm c/c including fixing with all fixtures etc. complete.

Item No. 94 : Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves 8 A boards etc. and stacking the materials as directed with all leads and lifts complete. Including removing wood work below etc. complete.

Item No. 95 : Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.

Item No. 96 : Removing purlins from roof including stacking as directed with all leads, lifts, etc. complete.

Item No. 97 : Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Item No. 98 : Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Item No. 99 : Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete.

Item No. 100 : Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc. complete.

Item No. 101 : Dismantling stone masonry in mud including stacking the materials as directed with all leads, lifts etc. complete.

Item No. 102 : Conveying the excavated unusable earth & debris from site upto a lead of 3Km and disposing off the same as directed etc. complete

Item No. 103 : Rebate for AC Sheets

Item No. 104 : Rebate for Manglore tiles

Item No. 105 : Rebate for teak wood

Item No. 106 : Royalty charges for murum, earth, hand broken metal, rubble etc. supplied at site.

Item No. 107 : Carrying out Sieve analysis of stone aggregates in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 108 : Carrying out Water absorption, Specific gravity, Impact value, crushing value test in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 109 : Carrying out Abrasion value test in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 110 : Carrying out Flakiness Index test in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 111 : Carrying out all basic tests of Cement in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 112 : Carrying out all basic tests of Sand in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 113 : Carrying out compressive strength of Concrete cube in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 114 : Carrying out all basic test on steel of diameter below 16mm in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 115 : Carrying out all basic test on steel of diameter above 16mm in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 116 : Carrying out all basic test on bricks in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 117 : Carrying out all basic test on Kota stone, Marble tiles, Granite tiles in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 118 : Carrying out all basic test on Ceramic tiles, Vitrified tiles in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 119 : Carrying out mix design of concrete in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 120 : Carrying out compressive strength test on cement mortar in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 121 : Carrying out all basic tests on rubble in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 122 : Carrying out plasticity Index test on murum in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 123 : Carrying out density & moisture content test on wood in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads etc. complete.

Item No. 124 : Carrying out thickness and mass per running metre test on alluminium in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 125 : Carrying out test on powder coating on alluminium in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads etc. complete.

Item No. 126 : Carrying out diameter, weight per meter and thickness test on GI pipes in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads etc. complete.

Item No. 127 : Carrying out all basic test on anticorrosive treatment to steel in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads etc. complete.

Item No. 128 : Carrying out flowability, softening point and drying time test on paint in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

Item No. 129 : Carrying out all basic tests on paver blocks in Government P.W.D. laboratory as per relevant I.S. standards and submitting test results including taxes, overheads and any other allied charges etc. complete.

M/s Suchintan Developers

Rachcon Infraprojects Pvt.Ltd.

HARSH CONSTRUCTIONS PVT. LTD