CONSTRUCTION OF YOGA HALL AND OTHER BEAUTIFICATION WORK IN QILA PARK AND GANDHI PARK WARD 10 MC PANIPAT.

Supply, erection and installation of ISI mark uPVC corrugated sheet for roofing of gazebo with provision and fixing of sheet with J-bolts complete in the satisfaction of engineer-in-charge.

Cast Iron Benches made up of M.S. tubes 2`x1` in length of 5 ft size and 13 square tubes weighing minimum 24 Kg per bench. The tubes in the back and in seat shall be painted with powder coated paint of any shade of wooden/brown/yellow/green as per the satisfaction and in complete discretion of Engineer-in-Charge. The legs and the Stands shall be of Cast Iron in Decorative Shape to provide aesthetics as well as for safety of the bench. The dimension of the legs shall suitably provide the mounting height of 32` and 24` in width and the weigth of the same shall not be less than 44 Kgs. (The rate is inclusive of the cost of loading, unloading and transportation (within MC Panipat area in different wards) including the charges of paint for lettering of the text as provided by the Engineer-in-charge).

Supply of mineral oxide based pigment (Iron Oxide), UV stable, alkali resistant and weatherproof, suitable for integrally coloured cement concrete, conforming to ASTM C-979, Fe As Fe203 :) 96.0 (%) Matter volation at 1050C : (1.0 (%) Water soluble salts :( 0.3 (%) Residule on 320mesh :( 0.3 (%) PH value : 3.0-7.0 Oil absorption :15-25 (g/100g) Conductivity :(400 (us/cm) Tinting stregth : :98-102 (%) complete as approved by Engineer-in-Charge.

LED Down lighter (SMD Type) (System lumen efficacy =120 (135 lm/Watt ) Supplying, installation, Testing and Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency )85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short and Open circuit protection ,THD ( 10% , P. F. = 0.95, IP20, CRI )80 , UGR (Unified Glare Rating) ( 19, Flicker free (flicker should be below 5 %), life time (LED,Driver and electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000 °K / 4000 °K / 5700°K /6000 ° K/6500 ° K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) (3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. `complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy = 120 (135 lm/Watt output . LM79 and LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C 12-15 watt

Plumbing Kit 3HP SWIMMING POOL PUMP (EMAUX)

SMPS CONTROLLER

EYE BULL NOZZEL

MAINTAINANCE KIT

MAIN DRAIN

GATE WALL BRASS 3`