COMPREHENSIVE MAINTENANCE OF B/R ITEMS TO CERTAIN MD ACCN AND ALLIED WORKS IN OMQS, OFFICERS MESS, MES IB AND OTHER BUILDINGS AT ORC, BOLTON ROAD AND CAW UNDER GE (AF) HAKIMPET

Amount

NOTES :- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. 5. Contractor should maintain separate registers for plumbing and carpenter repair works. Day to day complains should be noted in those registers with SI nos of complaints, location, qty of work, status of complaints and signature of incharge and stamp of the office. Format will be given from AGE B/R Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE (Civ) on every weekend without fail. 6. List of complaints will be given to contractor on the first week of every month. Contractor should ensure all the works will be completed within that month itself. 7. Contractor should ensure that plumbing complaints resulting in wastage of water should be attended and rectified within 24 hours. Otherwise, a recovery of 25% of corresponding item will be made from contractor. 8. Contractor will make his own arrangement to store his items. 9. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 10. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 11. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account. 12. Complaint is not attended by contractor, the penality per day Rs. 1000 will be recovered from payment of the contractor.

Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar complete including disposal of debris all as directed.

M&L, brickwork with using old size Flyash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L, half brickwork with Flyash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, preparing newly plastered surfaces of walls and ceilings applying three coats of white washing including preparation of surfaces complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete including disposal of debris at low laying areas as directed by Engr-In- Charge

M&L, 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finishing the surface even and smooth including necessary formwork complete all as specified and directed.

M&L, light coloured vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 9 to 10mm thick light coloured vitrified tiles in skirting of size 600 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note: Shade, design/pattern of tiles shall be as approved by GE

M&L, coloured glazed ceramic tiles of size 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs, tiles, cement concrete tiles/paver blocks of any description or thickness in floors, laid and bedded in any mortar including disposal of debris off the premises complete all as directed.

M&L, 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 20mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.

M&L, 12 to 18mm thick machine cut coloured granite, factory polished, in wall lining, (veneering to wall) over 10mm thick backing coat in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

M&L, 75mm thick PCC 1:4:8 type D-2 in sub base using 20mm graded stone aggregate finishing the surface even and fair including necessary formwork complete all as specified and directed

M&L, 100mm thick PCC 1:2:4 type B-1 in flooring using 20mm graded stone aggregate finishing the surface even and smooth without using extra cement including necessary formwork complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames, glazed with putty or fixed with beads, complete all as specified and directed.

S&F, 3mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 3mm thick figured , pin headed type and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F in repairs, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

S&F 1.25mm thick Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc., complete, as specified

S&F 1.25mm thick Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc., complete, as specified

S&F, second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints etc., complete all as specified and directed.

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc., complete all as specified and directed. Note: Sizes of members of shutters as specified in SSR Part I.

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F, 100mm size medium wt cold rolledm mild steel butt hinges, medium weight complete all as specified and as directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs 19/20 mm Plywood, grade BWR, fixed with screws to timber frame work.

S&F 0.9mm thick decorative laminates type I, or surface finish , any clour and pattern as approved .

S & F in repairs continuous (piano) hinges,mild steel, bright finish or electrogalvanised width of flap when open 38/40 mm

S& F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished

S& F in repairs auto closing mild steel hinges with spring for , cupboard fixed with nut, screw and washer of mild steel, bright finished

M&L, preparing new or previously untreated wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. 4mm thick glazing with plain glass ,Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed by Engineer-in-charge. Note: The unit rate quoted by contractor includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. 4mm thick glazing with plain glass ,Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area exceeding 2.00 sqm each

S&F in repairs, vertical type venetian blinds of colour as approved by GE, 100mm wide fabric blinds including operation chords, threads, counter nut, connection chain etc, including necessary fittings complete all as specified and directed.

S&F aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing , fixing arrangements for frame etc complete all as specified and directed

S&F aluminium Powder coated (minimum thickness of powder coating 50 micron) sliding shutters for windows with one or more rebates including joining cleat, handles and suitable locking arrangements, epdm washer for fixing glass etc., for fixing complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed.

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples complete all as specified and as directed.

M&L, making good under cills or over arches, lintels and bressummers including all pinning when necessary in cement mortar 1:4 finished to match with the existing work complete all as directed.

S & F aluminium body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs all as specified and directed.

S&F in repairs Gl frame work for seamlessceiling comprising of Gl perimeter channnel 0.55 mmthick with two unequal flangesof 20 and 30 mm and web of27 mm fixed to surroundingwall using nylon sleeves andscrews at 450 mm centre tocentre/intermediate channel0.9 mm thick having two equalflanges of 15 mm each and webof 45 mm suspended fromsoffit at approx 900 mm centreto centre with Gl cleat andsteel expansion fasteners withand including ceiling section(not exc 1.2 m length) of 0.55mm thickness having kurled fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre tocentre. Hangers 6 mm dia. G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm longcomplete all as specified

S&F in repairs, self designed preforated partical board or tiles for insulation purpose and accoustic purpose siz e 60cm x 60cm / 12mm thick as per approved pattern complete all as directed.

Repairs to aluminium door shutters n exc 2 sqm in area easing, removing/ refixing in same position with required hardware and screws for free operation of the shutter complete all as specified and directed.

Repairs to aluminium window shutters n exc 1.5 sqm in area easing, removing/ refixing in same position with required hardware and screws for free operation of the shutter complete all as specified and directed.

S&F mild steel clamps, hold fasts and similar small articles conforming to Fe-290, Gde-E-165 complete all as specified and directed.

Dismnantling of wrought iron or mild steel works of any description not otherwise provided for complete all as directed.

S&F, Ball bearing for rolling shutters complete all as specified and directed.

S&F, Spring for rolling shutters complete all as specified and directed.

S&F in repairs, steel rolling shutter 1.25 mm thick laths without ball bearing including top hood cover, anchoring rod, hasp including one shop coat of primer and erected in position as indicated complete push, pull or manual type and making good the existing surface etc complete all as specified and directed.

All as per item above but gear operated type with bevel gear box and crank handle complete all as specified and directed.

M&L welding in repairs not exc 2.5cm in length not exc 6 mm thick

M&L welding in repairs exc 2.5cm not exc 5.0 cm in length not exc 6 mm thick

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F Steel work in tubular trusses / purlines including special shaped washer etc. complete using ERW or including butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F in repairs, mild steel framed work such as grills, gratings etc., framed guard bars and similar works conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L, preparing new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

S&F in repairs, vitreous china wash hand basin white 550x400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size including removal of debries off the premises complete all as directed

S&F in repairs, stainless steel kitchen sink with drainage board, 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, stainless steel sink 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, stainless steel plate rack of size 900mmx600x200mm 1mm thick , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets complete all as specified and directed.

S&F in repairs glass corner shelf of size 9" dia with chromium plated rail etc complete all as specifed Cat No: ACN 1173 of Jaguar or equivalent

S&F in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed MAKE: CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE

S&F in repairs, plastic water closet seat cover, white, closed pattern with recessed bottom and cover aluminized hinging device complete all as specified and directed.

S&F in repairs, mild steel chromium plated towel rail, 'D' shaped, 20mm dia, 600mm long, premium quality complete all as directed.

S&F in repairs, 32mm dia PVC waste pipe with fittings for fixing to WHB and kitchen sinks of suitable length as per site requirement and including taking down old waste pipe complete all as specified and directed.

S&F in repairs, 32mm dia brass chromium plated waste coupling fittings for wash hand basin etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs, 100 mm dia brass chromium plated waste coupling fittings for stainless steel kitchen sink etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs first quality vitreous China wash down water closet pan (pedestal pattern), white, of size not less than 400mm x 400mm x 340mm (excluding fixing bolts, flushing cistern and flush pipe) but including provision of plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, antisyphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 and making good to floor complete all as specified and directed.

S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls and making good, ducts/ceilings or laid in floors including dismantling of old pipe complete all as specified and directed.

All as per item above but 20mm bore of pipe.

Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including all necessary brass threded elebow , T ect all fittings . all as specified and directed.

All same as per item above but 25 mm bore including all necessary brass threded elebow , T ect all fittings . all as specified and directed.

Demolition and breaking up drain pipes of 100mm dia

S&F PVC(SWR)75mm borepipes single socketed in any length with rubber ring joints fixed to walls/floor

M&L PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR)bend 110mm bore all as specified and as directed.

S&F PVC (SWR)bend 75mm bore

S&F PVC(SWR) bend 110mm bore with access door all as specified and as directed.

S&F PVC (SWR) bend of 75mm bore all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges Make :- Jaquar Code No CQT-CHR-23273UPR

S&F in repairs Flushing cistern,PVC valveless, syphonic action type 10 litre capacity,low level, white, with inlet,ball valve, float and handle and brackets and 32mm dia PVC flush pipe complete all as specified.

S&F in repairs, 500 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete including dismantling of old tank all as specified and as directed.

All as per item above but 1000litres capacity.

All as per item above but 2000litres capacity.

S&F in repairs, 15mm bore bib taps, long body, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15mm bore two way bib taps, long body, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron/GI pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, 125mm size chromium plated shower rose with or without swivel joint complete all as specified and directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, 100mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F in repairs, aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs, 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed to timber framework complete all as specified and as directed.

S&F exterior grade, prelaminated both sides with decorative choice lamination, fixed to timber framework complete all as specified and as directed.

S&F in repairs, 19/20mm dia mild steel chromium plated curtain rod, including suitable matching brackets , stops , rollers ect , complete all as specified and directed.

S&F, Roof trusses (framed), trussed, purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410W (Grade E-250) quality 'A' complete all as specified and directed.

Taking down existing roof treatment of any description including all vegitatiion growth cement plaster on concrete surface of roof slab / chjjas including cleaning and disposal of debris at low laying areas as directed by Engr-In- Charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete including disposal of debris at low laying areas as directed by Engr-In- Charge

M&L, PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in padding concrete/levelling course, to maintain slopes on roof and finishing the surfaces even and smooth mixed with integral water proofing chemical as per manufacturer's instructions including necessary formwork complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately

M & L Rendering 10mm thick on concrete surfaces on roof in CM with 1:3 finished even and smooth without using extra cement, mixing WPC as per manufacturers instruction. Note :WPC measured and paid separately

M&L for water proofing treatment on existing cleaned RCC roof comprising with the following operation as specified here-in-below:- a) Applying evenly one coat of cold bituminous primer conforming to IS-3384-1986, @ 0.30 litre per square metre on the Cleaned Plastered Surfaces. b) Applying evenly one Coat of blown Hot Bitumen of Grade 85/25 @ 1.20 kilogram per square metre on primed surfaces. c) S&F standard APP modified membrane prefabricated 5 layer 3mm thick with non woven polyster matt centeral core of 160 gsm (mini) impregrnated and coated on both sides with layers of APP modified bitumen and finised with micro perforated heat fusiable polythene film on both surfaces .the weight of membrane shall not be less than 3.5kg/sqm and laid over primed surface by LPG/ butane torch, all as per manufacturers instructions. d) M&L applying two coats of aluminium paint @ 0.1 ltr/Sqm per each coat complete all as directed

Supply only integral water proofing compound ISI marked approved quality

M&L for PCC 1:2:4, type B-1 (20 mm graded aggregate in roof kerbs of mud stops, rounded or chamfered on edges complete all as specified and directed.

Complete removal of existing treatment from internal surfaces of walls/ ceilings thoroughly by machine grinding and applying one coat of water proof wall care putty, 1mm thick (average) including rubbing/grinding with sand paper and making smooth and even surface and applying two coats of distemper oil emulsion, white or tinted over a coat of alkali resistant primer complete all as specified and as directed.

M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down copper / aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc, including paint tuch up to match with the existing surface as per site requirement, complete all as specified and directed.

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including suitable size non metalic, med. grade rigid PVC conduit with all conduit accessories and including provisoin of 1.5 sq mm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made of MS sheet and cover & base frame sheet for fixing switches, socket outlets, fan regulators etc, all as specified and directed. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. In case the flush box needs to be installed on surface, prior approval must be taken from the Engineer-in-charge and surface modular boxes made of FR grade ABS of minimum 1mm thickness with rounded corners need to be used instead of metal flush boxes. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

One light point controlled by one way switch.

One light point controlled by two way switch.

One ceiling fan/ exhaut fan point controlled by one one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

One bell/ buzzer point controlled by one push button n the same board with other switches or independent.

All as per item here-in-before but conductor drawn through stove enamelled 20 mm dia medium grade steel conduit for one light point controlled by one flame proof switch, complete all as specified and directed.

All as per item here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed.

M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including double locking type PVC casing and caping and its accessories of suitable size and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated steel teminal box made out of MS sheet and cover sheet for fixing the switches /sockets/ regulators etc, all as specified and directed. NOTE :- (i) Quoted rate shall be deemed to include the cost of making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. In case the flush box needs to be installed on surface, prior approval must be taken from the Engineer-in-charge and surface modular boxes made of FR grade ABS of minimum 1mm thickness with rounded corners need to be used instead of metal flush boxes. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

One light point controlled by one way switch

One light point controlled by two way switch

One ceiling fan/ exhaut fan point controlled by one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent.

All as per item here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed.

S&F Switch piano flush type, single pole one way 6 Amps 240 volts, complete all as specified and directed.

S&F Switch Piano flush type two way 6 Amps, complete all as specified and directed.

S&F socket piano flush type Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed

S&F Switch socket combination 2 in 1, 5 Pin, 6 Amps flush type, complete all as specified and directed.

S&F Switch socket combination, 3 pin, 6 and 16A, 5 in 1 flush type, complete all as specified and directed.

S&F Switch bell push 6 Amps flush type, complete all as specified and directed.

S&F Stepped type electronic fan regulator flush type, complete all as specified and directed.

S&F Modular switch 6A, 1 way, complete all as specified and directed.

S&F Modular switch 16A, 1 way, complete all as specified and directed.

S&F Socket outlet, 5 pin, 6A modular, complete all as specified and directed.

S&F Socket outlet, 6/16A modular, complete all as directed.

S&F switch bell push modular, complete all as directed.

S&F Fan regulator, 2 modular, complete all as directed.

S&F bell Ding Dong AC, 230 Volts, SP, complete all as specified and directed.

S&F in repairs, Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V. Make : M/S Shyam Switchgears / M/S Sudhir / M/S Baliga

S&F in repair LED light fitting 2 x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with and LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed. Make : M/S Shyam Switchgears / M/S Sudhir / M/S Baliga as approved by GE.

S&F in repairs, wall mounted 1 x 10 W LED 220V, AC, 2' batten type with extruded Al, heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre-wired and fixing the same on and including two Nos. PVC blocks and connecting up with twin core twisted flexile copper conductor cable of suitable size upto ceiling rose including taking down old one. Make: Havells/ Philips/Crompton/Syska.

S&F in repairs, wall mounted 1x 20W LED 220V, AC, 4' batten type, with extruded Al, heat sink, integral driver, energy efficient, ready to use pack etc., complete with all accessories internally pre-wired and fixing the same on and including two Nos. PVC blocks and connecting up with twin core twisted flexile copper conductor cable of suitable size upto ceiling rose including taking down old one. Make: Havells/ Philips/Crompton/Syska

Taking down the old unserviceable recess mounted fitting of any type, supply and fix, new ultra modern architectural 2'x2', recess mounted, 36W LED light fittingwhich provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling. including modification of the false ceiling as required, complete all as specified and directed. Make : Havells/ Philips/Crompton/Syska

Taking down the old unserviceable recess mounted fitting of any type, supply and fix, Square/round recess mounted 15 W LED light fitting, with high quality aluminium die cast body, high efficient constant current LED driver, including modification of the false ceiling as required at site, complete all as specified and directed. Make: Havells/ Philips/Crompton/Syska

S&F retrofit LED tube light, cool white, 18/20 watt, suitable for T8/T12 frame, 2000 lumens, including modification of wiring to suit LED tube and taking down old one, complete all as specified and directed. Make: Havells/Philips/CG/Syska.

Taking down of unserviceable building security lights of any type, Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.complete all as specified and directed. Make:Havells/Phillips/CG/Bajaj.

Taking down unserviceable sub main wiring of any description and M&L for sub main wiring with 3x1.5 Sqmm, (Ph+E+N) , FRLS PVC insulated, unsheathed, multi stranded,1100 volts grade copper conductor cable , single core, drawn through and including rigid PVC conduit of suitable size with all conduit accessories complete all as specified and directed. Note: Three runs (P+N+E) of 1.5 Sqmm copper cable and one run of 20 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 3x2.5 Sqmm, complete all as specified and directed. Note: Three runs (P+N+E) of 2.5 Sqmm copper cable and one run of 20 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 3x4.0 Sqmm, complete all as specified and directed. Note: Three runs (P+N+E) of 4.0 Sqmm copper cable and one run of 20 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 3x6.0 Sqmm, complete all as specified and directed. Note: Three runs (P+N+E) of 6.0 Sq mm copper cable and one run of 25 mm dia, non metallic, med. gr. rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 4x6.0 Sqmm (3Ph+1N) + 1x6.0 Sqmm (Earth), complete all as specified and directed. Note: five runs of 6.0 Sqmm copper cable and one run of 25 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 4x10.0 Sqmm (3Ph+1N) + 1x10.0 Sqmm (Earth), complete all as specified and directed. Note: Six runs of 10.0 Sqmm copper cable and one run of 32 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Taking down unserviceable sub main wiring of any description and M&L for sub main wiring with 3 runs of 4.0 Sqmm, FRLS PVC insulated, unsheathed, multi-stranded, 1100 Volts grade copper conductor calbe, single core, drawn through and including double locked type PVC casing & Capping and its all accessories of suitable size on wall/ roof surfaces, complete all as specified and directed. Note: Three runs 4.0 Sqmm copper cable and one run of suitable width of PVC casing and caping shall be measured as one unit length.

Desrciption all as per item here-in-before but with 3x6.0 Sqmm, complete all as specified and directed. Note: Three runs 6.0 Sqmm copper cable and one run of suitable width of PVC casing and caping shall be measured as one unit length.

Desrciption all as per item here-in-before but with 4x10.0 Sqmm (3Ph+1N) + 1x 10.0 Sqmm (Earth), complete all as specified and directed. Note: Six runs 10.0 Sqmm copper cable and one run of suitable width of PVC casing and caping shall be measured as one unit length.

S&F in repairs including taking down the following unserviceable Items:-

(a) Lamp holder PVC/ Polycarbonate type with back plate suitable for batten/ angular type.

(b) Ceiling rose PVC/ Polycorbonate insulated body with three terminals.

(c) Switch Piano, Flush type single pole, one way 6 Amps

(d) Switch Pian flush type two way 6 Amps

(e) Socket outlet 2 in 1, 3 pin, 6A

(f) Switch Socket Combination 2 in 1, 5 Amps flush type

(g) Switch Socket combination 3 Pin, 5 and 15 Amps 5 in 1 flush type

(h) Switch Bell push 5 Amps flush type

(j) Stepped type electronic fan regulator flush type

(k) Modular Switch 6A 1 Way

(l) Modular Switch 16 A 1 Way

(m) Socket outlet 6 A Modular

(n) Socket outlet 16 A modular

(o) Switch Bell push modular

(p) Fan Step regulator modular

(q) Bell Ding Dong AC 230 Volts

(s) Surface mounting PVC/Poly carbonate Box of 6 Amps Socket with switch

(t) Surface mounting PVC/Poly carbonate Box combined 2 hole for 6/16 Amps Socket with Switch

(u) Plug top polycarbonate 3 Pin 5 Amps

(v) Plug top Polycarbonate 3 Pin 15 Amps

M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, including reassembling blades and hanging ceiling fan after getting repaired and connecting up including provision of cable from ceiling rose to connector of fan, complete all as specified and directed.

All as per item here-in-before but exhaust fans of any sweep.

All as per item here-in-before but wall mounted fans/ Pedestal fans of any sweep.

Disconnect and remove unserviceable capacitor and Supply and fix capacitor 2.5 MFD suitable for ceiling fan / exhaust fan, complete all as specified and directed.

All as per item above but of 4 MFD suitable for ceiling fan / exhaust fan, complete all as specified and directed.

Dismantle the unserviceable shackle assembly and supply and fixing new shackle assembly comprising GI bolts, nuts, rubber bush and split pin, complete all as specified and directed.

M&L for removing the defective fan winding and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding, complete all as specified and directed for the following:-

Ceiling fan of size upto 1400 mm sweep.

Wall mounted/ Pedestal fan of size upto 450 mm sweep.

Exhaust fan of size upto 300 mm Sweep.

Exhaust fan of size 350 to 450mm Sweep.

Disconnect and remove unsv PCB and supply and fix PCB suitable for BLDC Fan of 1200mm sweep of any make or model, complete all as specified and directed

M&L for remove unsv bearing and supply and fix bearing suitable for fan of 1200mm sweep of any make or model, complete all as specified and directed

Taking down unserviceable louvers and supply and fix new louvers suitable for exhaust fans of size upto 450 mm sweep, complete all as specified and directed.

Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections,taking out the inner leaking copper tank, brazing the leaking portion of copper tank, testing for leaks, re-assembling the geyser including provision of additional glasswool as required, refixing in position, testing and reconnecting the inlet/ outlet water pipes and testing on completion, complete all as specified and directed.

S&F for the following items in repairs, suitable for single phase, 230 Volts, 50 Hz for existing type electric Geyser of capacity 25/50 Litres incl taking down the old one :-

(a) Heating element 1500/2000 watts push/ thread type porcelain / Circular / triangular type as required at site.

(b) Thermostat as per the existing type.

(c) Indication lamp red/ green.

(d) Fusible plug

Taking down unserviceable PVC connection of any description and supply and fix new PVC connection 15mm dia 450mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water, complete all as specified and directed.

Taking down unserviceable PVC connection of any description and supply and fix new PVC connection 15mm dia 600mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water, complete all as specified and directed.

Taking down old UNSV DB and Supply and fixing Vertical distribution board for incoming MCCB upto 250 A and MCBs for outgoing to be used, VTPN 8 Way, 415 Volts having earth bar & neutral link double door as in repairs complete all as specified and directed. Note. MCCB and MCB will be measured and paid seperately under relevant items. Make Havells, HPL, Indo Asian, Standard, Legrand.

Taking down old UNSV DB and Supply and fixing Vertical distribution board for incoming MCCB upto 250 A and MCBs for outgoing to be used, VTPN 4 Way, 415 Volts having earth bar & neutral link double door as in repairs complete all as specified and directed. Note. MCCB and MCB will be measured and paid seperately under relevant items. Make Havells, HPL, Indo Asian, Standard, Legrand

Taking down old UNSV DB and Supply and fix in repair, MCB distribution board, double door type, TPN 4 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc, including taking down existing DB complete all as specified and directed.

Taking down old UNSV DB & Supply and fix in repair, flush to wall, MCB distribution board, double door type, SPN 12 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc, incl taking down existing DB complete all as specified and directed.

Taking down old UNSV DB & Supply and fix in repair, flush to wall, MCB distribution board, double door type, SPN 8 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc, including taking down existing DB complete all as specified and directed.

Taking down old UNSV DB & Supply and fix in repair, flush to wall, MCB distribution board, double door type, SPN 4 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc, including taking down existing DB complete all as specified and directed.

Taking down old UNSV Metal Clad enclosure & Supply and fix Single Pole & Neutral Metal clad enclosure with a two pin and earth plug and socket including one single pole MCB of 20 Amps in repair complete all as specified and as directed by Engineer-in-Charge

Taking down old UNSV MCCB & Supply & fix in repairs, MCCB 3 pole, 415V, Adjustable /fixed type for the follwing size suitable for load line DBs with terminating cables by using lugs as required, complete all as specified and directed.

MCCB TP 160A, 36KA. Adjustable type

MCCB TP 125A, 16KA. fixed type

MCCB 3 Pole 25A to 100A, 16KA. fixed type

Taking down old UNSV MCB & Supply and Fix for the following ''C'' curve MCB, 415V, including provision of copper lugs for cable termination, terminating cables by using lugs as required, complete all as specified and directed.

MCB TPN/FP 16 to 32 Amp

MCB TP 25 To 63 AMP

MCB SPN 32 AMP

MCB SPN 40 to 63 AMP

MCB SP 5 To 32 AMP

MCB FP 40 to 100 AMP

Taking down exisiting service cable and supply and fixing 1100 volts grade, heavy duty cable, PVC insulated, stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of size 4.0 Sqmm, complete all as specified and directed.

Taking down exisiting service cable and supply and fixing 1100 volts gr. heavy duty cable, PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of size 6.0 Sqmm, complete all as specified and directed.

Taking down exisiting service cable and supply and fixing, 1100 volts gr. heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of size 10 Sqmm, complete all as specified and directed.

M&L in replacement for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

M&L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to wall or any other indicated situation for loop earthing etc. as required 4.0mm dia galvanised iron or steel wire, complete all as specified and directed.

S&F electronic meters temper proof LCD display with polycarbonate cover Single phase, 230 V, 10 to 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete including taking down old unsv electric meter complete all as specified and directed. Make: HPL Model:SPPB1321120000ME03 (Gurgaon) 'OR' equivalent make in in Secure / L&T / AE.

S&F electronic meters temper proof LCD display with polycarbonate cover 3 Phase, 415 volt, 10 to 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete including taking down old unsv electric meter complete all as specified and directed. Make: HPL, Model:TPPB1521130000ME01 (Gurgaon) 'OR' equivalent make in Secure / L&T / AE.

Supply and replacing of TP, 3x240V, 50Hz, CT operated, digital Multi-function Energy meters of accuracy class 0.5 with backlit LCD display. Measures and displays trivector energy, load survey, TOD, Tamper detection & logging, power on / off events, instantaneous parameters of rating -/5A with transperant hinged type box, including taking down the old, complete all as specified and directed. Make: L&T 'OR' equivalent in Secure, HPL, AE.

Taking down unserviceable Fire Alarm control panel and Supply, Installation, Testing and commissioning of New Addressable Fire Alarm control panel with power supply & battery back up at normal condition and 15 minutes alarm operation with battery charger etc. 2 Zone panel, complete all as specified and directed. Make: EST-3/Notifire/ Honey well/ Ravel

Taking down unserviceable multi-sensor (smoke & heat) and Analog addressable type multi-sensor (smoke & heat) detector with dual optic's technology to distinguish and differenciate between real fire, steam and dust to avoid any false alarm & built-in isolator with multiple algorithms setting with base powder, including other accessories as required, complete all as specified and directed. Make: EST-3/Notifire/ Honey well/ Ravel

Servicing the Analog / Addressable type multi sensor fire alarm system by removing the faulty detectors, cleaning all the detector, ensuring the power supply and battery back up to the panel, minor repair to the power cord and cable, clearing all the faults, detected by the system and bring it to normal mode complete all as specified and directed by Engineer in Charge. Note. Replacement of detectors and battery will be measured and paid separately.

Taking down UNSV battery from the Fire Alarm control Panel and Supply and fixing new Battery of 12 Volt DC lead acid battery 7 AH complete all as specified and directed by Engineer in charge.

Servicing of solar geyser panel using mild cleaning agent, removing and replacing of rusted nuts and bolts with GI nuts and bolts, complete all as specified and directed.

Repairs of copper tube with dia 8 to 10mm from inlet/ outlet of Solar Panel by cutting the worn out portion and replace with new copper tube of suitable dia upto 3mtr by welding/ turning/ fusing and matching with existing, complete all as specified and directed.

Supply and replacement of geysor element, 3.0 KW, SP, suitable for Solar water heater backup including taking down the old element, complete all as specified and directed.

Supply and replacement of geysor element, 2.0 KW, SP, suitable for Solar water heater backup. including taking down the old element, complete all as specified and directed.

Disconnecting the electrical, water supply connections of Solar geyser, repairs to leaking Solar geyser inner tank by removing glass wool, cutting/disconnecting the rusted inlet and outlet nipples, supply and connect new nipples of size as existing by brazing/ welding, leak testing, refilling the glass wool including additional glasswool as required, fixing in position, testing and commissioning, complete all as specified and directed.

Disconnecting the electrical, water supply connections of Solar geyser, Supply and replacement of Solar geyser storage water tank of capacity 100litres, made of EN 304 SS steel sheet of thickness 0.8mm, suitable for flat plate collector along with with stand, complete all as specified and directed.

S&F in replacement electric water heater, vertical storage type with ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe) etc including taking down the existing unserviceable geyser complete all as specified and directed by Engr-in-charge. Model: Havells Monza GHWAMOSWH025 / Crompton Arno Neo ASWH-3025 / Philips.

S&F bed side night lamp, adjustable arm decorative type as per existing model fixed on wall complete on PVC base blocks and connecting with suitable size of flexible cable from connector all as specified and directed by Engineer-in-charge. Make : Philips/Halonix/Bajaj

S&F in repair, booster pump cylender (pressure tank) threading type suitable for pressure pump of capacity 0.5 HP 220 volt AC or existing type, including testing all as directed by Engineer-in-charge.

S&F in repair, booster pump Pressure switch threading type suitable for pressure pump of capacity 0.5 HP 220 volt AC or existing type, including testing all as directed by Engineer-in-charge. Model No. KP-35 Pressure switch of Danfoss or equivelent in ocean star/Amazor.

M&L for Rewinding of electrical motor(booster pump) by taking out burnt copper winding from stator, cleaning the casing & slots with wire brush & washing with water under pressure, cleaning with CTC, dried and rewinding the motor using same gauge of super enameled copper wire as existing & making the winding leak proof by applying warnish, drying etc. and re-connecting at its original position of capacity of motor upto 0.5 HP including testing of motor after installation for satisfactory functioning/running all as specified and as directed by the Engineer-in-charge.

S&F water pressure boosting pump of capacity 0.5HP, single phase with all accessores like pressure switch, pressure gauge, NRV, 5way connector, cylinder tank, high grade brass impeller, upto 8m suction lift complete.

PVC insulated Tape 20 mm width, 25 m length, assorted colour Make: Grippex or equivalent as approved.

S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge

S&F in replacement Exhaust fan, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge

M&L for cutting round holes suitable using diamond cutter for fixing of exhaust fan/chimney pipe of size 150-300 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

S&F in replacement wall mounted decorative light, 23W, body colour white complete all as specified and directed (Model: Philips comet 30575 or Havells stylo LHFOECE1TZ1O014 or similar)

S&F in replacement of electric chimney capacity of Air flow of 1500 Cum / hr of size of 90 cm specifications of heat auto clean with motion sensor, Auto off function, touch sensor control, brushless DC motor 9 speed control, oil collector tray, electric lights LED, filter less chimney including aluminium pipe from chimney to exhaust hole complete all as specified and directed. Model No. Elica WDFL 900 BLDC HAC LTW MS NERO or Hindware C100371 or similar

S&F in replacement LED light fitting in replacement of 10 watt bulk head luminaries, IP 65, 6000K, plastic/polycarbonate material complete with all accessories and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Model: Havells RUGBYGENXFTS10WLED865SSYMBOPC or Wipro WP1160 or similar

S&F in replacement Ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, Non-BLDC, power consumption not to exceed 40W, BEE 3 star rated as per latest BEE norms including taking down the existing unserviceable fan and depositing it to MES E/M Store complete all as specified and directed by Engr-in-charge. Model: Havells ES40 / Crompton.

RAJU AND COMPANY (BID ID -3401877)

NEWS CONSTRUCTIONS (BID ID -3409461)

VACON INFRASTRUCTURES (BID ID -3401582)