Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹41.0 L+₹3.0 L (7.77%)Rejected-Finance | L2 | Rejected-Finance other than lowest bidder | |
| 3 | L3₹41.0 L+₹3.0 L (7.90%)Rejected-Finance | L3 | Rejected-Finance other than lowest bidder | |
| 4 | L4₹41.2 L+₹3.2 L (8.43%)Rejected-Finance RZB 96 B GF MAHAVIR VIHAR SECTOR 1 DWARKA NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-Finance other than lowest bidder | |
| 5 | L5₹44.2 L+₹6.2 L (16.3%)Rejected-Finance 216 UGF RAM VIHAR ANAND VIHAR DELHI 110092 | SHAHDARA | DELHI | 110092 | L5 | Rejected-Finance other than lowest bidder |
| Sl No | Description | Qty | Unit | Keshav Brothers L2 | V M CONSTRUCTION L5 | DEEP ASSOCIATES L3 | QUALITY CONSTRUCTIONS CO L8 | The new hut furnitures L6 | M/S SURINDERAS CONSTRUCTION CO. L1 | Paradise Interior L7 | SHAKYA ENTERPRISES L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6mm mean radius, built in CM(1:4) including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified. | 7 | Cum | 3,999 ₹27,993 | 2,700 ₹18,900 | 2,000 ₹14,000 | 4,500 ₹31,500 | 1,999 ₹13,993 | 2,000 ₹14,000 | 1,800 ₹12,600 Lowest | 3,000 ₹21,000 |
| 2.00 | M&L for brickwork with subclass `B' bricks, straight or curved on Plan to any radius in half brick thick walls, built in CM(1:4) including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified. | 20 | Sqm | 399 ₹7,980 | 450 ₹9,000 | 150 ₹3,000 Lowest | 700 ₹14,000 | 399 ₹7,980 | 500 ₹10,000 | 2,250 ₹45,000 | 400 ₹8,000 |
| 3.00 | Demolition of plain concrete cement (unreinforced) of any description and in any position not otherwise specially provided complete all as specified. | 5 | Cum | 99 ₹495 | 200 ₹1,000 | 50 ₹250 | 200 ₹1,000 | 49 ₹245 Lowest | 50 ₹250 | 50 ₹250 | 500 ₹2,500 |
| 4.00 | M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed. | 5 | Cum | 3,499 ₹17,495 | 3,000 ₹15,000 | 1,800 ₹9,000 | 4,500 ₹22,500 | 1,799 ₹8,995 Lowest | 1,800 ₹9,000 | 2,200 ₹11,000 | 3,500 ₹17,500 |
| 5.00 | M&L for rendering 15mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:6 finished even and smooth including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height complete all as specified and directed. | 1,600 | Sqm | 99 ₹1,58,400 | 90 ₹1,44,000 | 100 ₹1,60,000 | 130 ₹2,08,000 | 149 ₹2,38,400 | 65 ₹1,04,000 Lowest | 140 ₹2,24,000 | 110 ₹1,76,000 |
| 6.00 | M&L rendering 15mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 finished even and smooth including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height complete all as specified and directed. | 1,700 | Sqm | 111 ₹1,88,700 | 100 ₹1,70,000 Lowest | 140 ₹2,38,000 | 145 ₹2,46,500 | 149 ₹2,53,300 | 120 ₹2,04,000 | 140 ₹2,38,000 | 120 ₹2,04,000 |
| 7.00 | M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 400 | Sqm | 79 ₹31,600 | 140 ₹56,000 | 110 ₹44,000 | 140 ₹56,000 | 149 ₹59,600 | 65 ₹26,000 Lowest | 150 ₹60,000 | 100 ₹40,000 |
| 8.00 | M&L for rendering 15mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 finished even and smooth complete all as specified and as directed. | 50 | Sqm | 119 ₹5,950 | 160 ₹8,000 | 150 ₹7,500 | 160 ₹8,000 | 149 ₹7,450 | 65 ₹3,250 Lowest | 150 ₹7,500 | 120 ₹6,000 |
| 9.00 | M&L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and smooth without using extra cement all as specified and directed. | 70 | Sqm | 99 ₹6,930 | 155 ₹10,850 | 140 ₹9,800 | 145 ₹10,150 | 149 ₹10,430 | 65 ₹4,550 Lowest | 140 ₹9,800 | 110 ₹7,700 |
| 10.00 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided. | 3 | Cum | 99 ₹297 | 200 ₹600 | 50 ₹150 | 200 ₹600 | 49 ₹147 | 50 ₹150 | 30 ₹90 Lowest | 100 ₹300 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
5 Jun 2025, 6:00 pmClosed
GE NORTH DELHI CANTT 10
GE NORTH DELHI CANTT 10
REPAIR REPLACEMENT TO TILING PLASTERING JOINERY SANITARY PLUMBING AND OTHER MISC BR WORKS IN OTM ACCN OF COD UNDER AGE BR I OF GE NORTH DELHI CANTT 10
2025_MES_708392_1
GE/North-16/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE NORTH DELHI CANTT 10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE NORTH DELHI CANTT 10
₹96,000
Yes
12 Aug 2025
15 May 2025
9 Jun 2025
15 May 2025
5 Jun 2025
29 May 2025
Amount
M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6mm mean radius, built in CM(1:4) including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified.
M&L for brickwork with subclass `B' bricks, straight or curved on Plan to any radius in half brick thick walls, built in CM(1:4) including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified.
Demolition of plain concrete cement (unreinforced) of any description and in any position not otherwise specially provided complete all as specified.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:6 finished even and smooth including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height complete all as specified and directed.
M&L rendering 15mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 finished even and smooth including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height complete all as specified and directed.
M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 finished even and smooth complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and smooth without using extra cement all as specified and directed.
Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided.
M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crusted stone aggregate in chajjas complete all as specified and as directed. (reinforcement to be measured separately).
M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. (reinforcement to be measured separately).
Mild steel TMT bars 10mm dia and above as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.
M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 1mm thick wall care putty and chalk whiting on plastered surfaces preparatory to distempering complete all as specified and as directed.
M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of Oil bound distemper over one coat of 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed.
M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.
M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and directed.
M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.
Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed.
Taking down chowkhats or frames exc 1.50 sqm but n.exc 4.00sqm with shutters (without taking off shutters from the frames) all as specified and directed.
S&F 40mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F fibre glassreinforced plastic (FRP) door frame, three legged of cross section 90 x 45mm having single rebated of 32 x 15mm to receive shutter of 30mm thickness.The laminate shall be moulded with ffire resistant grade un-saturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall befiled with suitable wooden block in all over frame. The frame shall be covered with fibre glass from all sides including MS stay shall be provided at the bottom to steady the frame complete all as specified and directed.
S&F factory made solid FRP door shutter, 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retavdant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminated for panels and confirming to IS-14856-2000, including fixig to frames complete all as specified.
S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60mm x 44.45mm x 2mm, in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F powder coated of any colour aluminium window and ventilator shuttrs, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading screws etc complete all as specified
Providing and fixing factory made uPVC white colour Sliding window area exceeding 2.0 Sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includingudes all other connected accessories. Net Opening will be measured lor payment purpose.
Supply and fixing factory made uPVC door/window frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48mm x 40mm (tolerance ± 1 mm), with wall thickness 2.0mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19mm X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of GE.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick ordinary sheet glass and glazing with oil putty complete sie of each pane not exc 0.50 Sqm each pane all as specified and directed.
S&F 5mm thick sheet glass pan ordinary quality and glazing with rubber beading and aluminium glazing clip/patti area n.exc 1.00 Sqm each pan complete all as specified and directed.
S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F in repairs 100mm size butt hinges, extruded aluminum alloy with galvanised mild steel ISI marked complete all as specified and directed.
S&F mild steel pressed steel handle, oval type, stove enamelled black 150mm long complete all as specified.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repairs table top wash basin white, flat bottom size 525mm x 415mm x 140mm of make Jaguar or equivalent excluding tap, chain, plug but including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and directed.
Refixing only old 15mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required including taking up or down steel tubing and connections complete all as specified and directed
S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.
Refixing only old 20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required including taking up or down steel tubing and connections complete all as specified and as directed.
S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and as directed
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete all as specified and as directed.
S&F PVC (SWR) bends any radius, 75mm bore, complete all as specified and as directed.
S&F PVC (SWR) bends with access door any radius, 75mm bore, complete all as specified and as directed.
S&F PVC (SWR) bends any radius, 110mm bore, complete all as specified and as directed.
S&F PVC (SWR) bends with access door any radius, 110mm bore, complete all as specified and as directed.
S&F PVC (SWR) vent cowl, 75mm bore complete all as specified and as directed.
S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light including dismantling of old false ceiling of any type, complete all as specified and directed.
Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified.
S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.
S&F factory made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.
S&F 100mm long, extruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.
S&F continuous (piano) hinges,mild steel, bright finish or electrogalvanised,Widthof flaps 40mm (when open) complete all as specified and directed.
S&F in repairs bib tap 15mm bore fancy type chromium plated complete all as specified and directed
S&F with complete installation of wind operated turbo air ventilator of size 600mm dia made of stain less steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparant sheet of size 5.5 x 3.5 feet on roof of Prepainted Galvalume Sheet/CGI sheet Covering over wooden/MS structure as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors/wall, aprons etc., laid bedded and pointed in any mortar complete all as speicified.
M&L for 25mm thick 1:2:4 type B-0 (using 12.50mm grahed crushed stone aggregate) as in sub base to receive stone slab and pavement all as specified and directed.
M&L 20 to 25mm thick machine cut Kota stone slab mirror polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.
M&L 20 to 25mm thick machine cut Kota stone slab polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.
M&L granite 18mm to 20mm thick colour as approved (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 including moulding and polishing the edges complete all as specified and directed
M&L granite 18mm to 20mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding and polishing the edges etc complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified.
M&L vitrified ceramic tiles 10mm thick square/rectangular dark shade)granite or marble texture polished, area of each tiles not exceeding 0.36 sqm as in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed.
All as per the description of srl items No 73 but in vertical surface as skirting, dado and risers to steps over and including10mm thick rendering/backing coat in cement mortar 1:4 etc.
M&L for vitrified coloured tiles shade as approved 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm as in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.
All as per the description of srl items No 75 item above but as in vertical surfaces such as skirting/ dado over and including 10mm thick rendering in CM (1:4) complete all specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed
M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to over and match including rendering 10mm thick in CM (1:4) and finished rough, complete all as specified & directed.
S&F 10mm thick plain or frosted toughned glass for door shutters,making partitions etc. of size area exc 1.50 Sqm but n.exc 3.00 Sqm including necessary arrangements required for fixing it in position complete as specified and directed.
Keshav Brothers (BID ID -3313578)
DEEP ASSOCIATES (BID ID -3313646)
SHAKYA ENTERPRISES (BID ID -3314198)
V M CONSTRUCTION (BID ID -3313602)
The new hut furnitures (BID ID -3313949)
Paradise Interior (BID ID -3313425)
QUALITY CONSTRUCTIONS CO (BID ID -3313816)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .