Renovation and Repair of Hostel Building Staff Quarter Construction of Kitchan Shed and Misc. Work at ST Residential Boy Middle School Tapkara Block Topra

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.1

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.4

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. BCD 5.10.3

Water proofing of old and new roof slab :- providing and laying water proofing treatment on roof slab by applying two components,factory designed ----do---- all comp. BCD 5.12.1

Covering of treated surface with PCC :- Providing 25 mm thick cement concrete M 20(1:1.5:3) maintaining slope in alternate 2mx2m panels with approved quality of materials -do- all comp. BCD 5.12.2

Providing R.C.C. M-20 with normal mix of 1:1.5:3 in ROOF SLAB with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. BCD 5.3.11

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns,roof slab,beam BCD 5.3.17.3

Providing designation 75-A brick work in C.M. (1:6) in super-structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. BCD 5.2.3

Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I . BCD 5.7.6

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . BCD 5.6.28

Providing and laying 25 mm thick kotah stone slab flooring of approved texture,size and colour over-do- all comp. (iv) 600x600 mm size. BCD 5.6.19

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. BCD 5.6.23 (I)

Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I BCD 5.7.3

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the urface evn and smooth. DSR 13.26

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over a new surface including preparing the plastered surface by rubbing smooth, with pumice stone or fine sand paper applying putty wherever required scalfolding. washing of floors and taxes. all complete as per building specification and direc tion of E/I.BCD 5.8.20

Providing and applying white cement based putty of average 1 mm thickness over plastered surface to prepare the urface evn and smooth. DSR 13.80

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication,providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.BCD 5.5.29

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. BCD 5.8.45

Supplying,fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20X'10X2 mm. at 100mm. Centres and braced with M.S. flat diagonals 20 X 3mm, with top and bottom rails of T. iron 40x40x6mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification arrd direction E/I.BCD 5.5.14 Pg No-120.

providing and fixing on wall face unplasticised - rigid P.V.C pipes -110 mm dia.. DSR 12.41.2

(II)SAND

(iv) BRICKS

(III)STONE CHIPS

(IV) PAVER BLOCK

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning,removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) BCD 5.8.41

Supplying, fitting, and fixing 32 mm thick good quality dreessed and well seasoned sal wood with 25 mm thick panels -do -as per building specification . BCD 5.4.27

Providing two coats of painting with synthetic enamel paint with one coat of primer of approved shade and make over wooden surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. BCD 5.8.31

Taking down old shutters of doors and window shutters including stacking of servicable materials and disposal of unservicable materials with all leads -do- all comp.

Taking down old Chaukhat of doors including stacking of servicable materials and disposal of unservicable materials with all leads -do- all comp.

Taking down old Chaukhat of windows including stacking of servicable materials and disposal of unservicable materials with all leads -do- all comp.

5.5.5 A 10 MM DIA. = 30 % OF TOTAL

5.5.6 B 12 MM -16 MM DIA. DIA. = 40 % OF TOTAL

Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. BCD 5.7.15

Providing P.C.C. M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, , mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. BCD 5.3.1.2

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) BCD 5.5.12

Providing and fixing Fan Hooks of 16 mm dia M.S. Bar 1m long ----- complete as per direction of E/I. BCD 5.5.13

EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I . BCD 5.1.1

Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) . BCD 5.1.10

Providing designation 75- B, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge. BCD 5.6.3

Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATION and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. BCD 5.3.9.1

Providing designation 75-B brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. BCD 5.2.6

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.BCD 5.3.10

Structural steel work in single section, fixed with or without connecting plate,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all comp. BCD 5.5.35

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m². DSR 12.1.3

Providing ridgesor hips of width 60 cm overall width plain G.S sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia. Limplet and bitumen washers complete : 0.63 mm thick. DSR 12.4.2

Providing earth work in filling in compound by carriage all complete as per direction of E/I 5.1.8

Supplying, fitting and fixlng 450mm hlgh vltreous white gtazed earthen E.W.C. with 'p' trap of parry, hlndustan or any other approved l.S.S. make lndudlng supplying and flxlng 15 lltros C.l. mosquito proof low down flushing clstem of approved make wlth comploto flttlngs with C.l.handle and R.S. or bracket with telescoplc f,ush plpc wlh brass coupllng and plumbers Jolnts splndle stop cock of spprovd quallty wslght not less than 450grams 15mm P.V.C. connec-tlon plpc 46crn. long wlth brass coupllng at both ends and whlta/black plastlc solld stato lcal and lead of commander/cuckoo or other l.S.S. make wlth hlngce or scna rs etc. palntlng pipe and cistem otc. wlth 2 coats of approvod palnt ovor a coat of rcd oxlde prlmlng, all oomplate aB par spedflo.ton ind dlruo0on of E/t. 3.2.2

Supplying fitting and fixing vitreous white glazed earthen ware wash hand basln of parry or Hindustan or any other l.S.S. approved make supported on painted C.l. or R.S. braokets 32mm C.l.braEs waste, 15 mm dia C.l. body brass spindle stop cock of apprcived quality of weight not less than 300grams, 32mm P.V.C. wast6 plpe 750mm long with brass coupling at one end an

CARRAIGE OF MATERIALS (I)CEMENT

Providing T.M.T. Reinforcement FE 500 of following dia Rods as per approved design and drawing including carriage of M.S. Rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (APPROVED BRAND - TATA/ SAIL) BCD 5.5 5.5.4 8MM DIA. = 30 % OF TOTAL

(b) From 51.0 M to 150.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. DSR 23.3.3 200 mm nominal size dia

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: DSR 23.13.3 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. DSR 23.14.3 200 mm clamp

Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP DWS M1055

Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc D.O.L. starterwlth SS Enclosure wlth 380/41S Volt coit 5 to 10 H.P all complete job as per direction of E/I. DWS Item no.-M1065

Supplying fitting and fixing 3 crore 4 sqmm Flat copper conductor PVC sheathed & PVC insulated submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. DWS Item no.-M1062

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 18.9.6 50 mm nominal outer dia Pipes

Providing designation 75-A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.2.11/BCD

Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening , mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.3.2.1/BCD

Centering and shuttering including strutting, propping etc. and removal of form for Columns,pillars. BCD 5.3.17.6

Centering and shuttering including strutting, propping etc. and removal of form for Lintel,beams. BCD 5.3.17.5

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. 5.8.24/BCD

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 16.53/DSR

Supplying,fitting and fixing 40x40x4 mm IS2062 Grade A M.S. angle,hoisting, welded with 6 mm dia. And 75 mm long M.S rods,anchorage fixed in concrete steps at the time of casting including taxes all complete as per direction of E/I. 5.5.23/BCD

providing and laying factory made chamfered edge cement concrete paver block of required strength ( 80 mm thick cc paver blocks of M-30 grade with approved colour and design) over 50 mm thick compacted coarse sand -do- all comp.

Providing P.C.C .M-20 in nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, including provision for expansion joint in intervals, taxes and royalty all complete as per building specification and direction of E/I.5.3.2.1

Providing and fixing gun metal gate valve approved quality and make. DSR 18.17 20mm dia

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 Circular tank -- 2000 ltr. Capacity

HYDT: Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. DWS Page no-56 Item no.-M1035 (a) From 0.00 M to 50.00 M below G.L.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.Energy 1.7 Pg No-67 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Energy 2.12.1 Single pole Pg No-78

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal/ coke and salt ) as required Energy 3.2 Pg No-80

Add 18 % GST

Add 1% Labour Cess