Annual Maintenance Contract (AMC) for Package AC, Cassette AC and Split AC SRPL at Manali

Amount

Service of Package AC Systems

Pressure Testing, Leak arresting of 5.5TR Unit- In case of any leakage in the circuit, Nitrogen pressure to be injected in the circu it for checking the leakage in the circuit. After detecting the leakage location, brazing of copper pipes to be carried out such tha t the leakage is arrested. Brazing to be carried out with Oxygen and Acetylene cylinder brazing set. No LPG Brazing set is allowed. After leak is arrested, Nitrogen pressure to be injected in the circuit at 250-300 psi and observe for 12 hours for confirming that the leakage was arrested. Vaccumising of the circuit to be carried out for 2 hours and R-22 gas to be charged in the circuit. The pr essure of the charged circuit to be maintained at 60 psi and to be shown to Engineer-In-Charge. Line Item includes fixing of supplie d Outdoor Unit assembly, Indoor coil, Copper pipe, Drier, Expansion Valve, Pressure Gauge, Compound Gauge and Compressor. Supply of R-22 gas, Outdoor Unit assembly, Indoor coil, Copper pipe, Drier, Expansion valve and Compressor will be paid seperately as per Line Items in the SOR.

Servicing of 11 TR ACs- Carrying out periodic preventive maintenance of the air conditioners as per the direction of the Engineer-In -Charge /Site Engineer including washing with water / detergent, filter cleaning, coil cleaning, checking of electrical wiring, curr ent, gas pressure, replacement of components as required etc. so as to maintain the ACs in good working condition. During maintenanc e, all parts of the AC has to be monitored regularly and in case of non–functioning of any parts, the same has to be informed to Eng ineer-In-Charge. The Periodic preventive maintenance shall be carried out every Month. The maintenance report to be submitted to the Engineer-In-Charge, indicating the functioning of all parts. In case of Breakdown of Package AC unit within a month, the breakdown has to be attended within 24 hours and no extra cost will be charged.The supplied Contactor, OLR,PCB, Belt, Blower shaft, Blower Be aring and HPLP Trip switch of Package AC Units has to be fixed during breakdown. The supply of Contactor, OLR,PCB, Belt, Blower shaf t, Blower Bearing and HPLP Trip switch will be paid seperately as per Line Items in SOR

Pressure Testing, Leak arresting of 8.5TR Unit- In case of any leakage in the circuit, Nitrogen pressure to be injected in the circu it for checking the leakage in the circuit. After detecting the leakage location, brazing of copper pipes to be carried out such tha t the leakage is arrested. Brazing to be carried out with Oxygen and Acetylene cylinder brazing set. No LPG Brazing set is allowed. After leak is arrested, Nitrogen pressure to be injected in the circuit at 250-300 psi and observe for 12 hours for confirming that the leakage was arrested. Vaccumising of the circuit to be carried out for 2 hours and R-22 gas to be charged in the circuit. The pr essure of the charged circuit to be maintained at 60 psi and to be shown to Engineer-In-Charge. Line Item includes fixing of supplie d Outdoor Unit assembly, Indoor coil, Copper pipe, Drier, Expansion Valve, Pressure Gauge, Compound Gauge and Compressor. Supply of R-22 gas, Outdoor Unit assembly, Indoor coil, Copper pipe, Drier, Expansion valve and Compressor will be paid seperately as per Line Items in the SOR.

Servicing of 17 TR ACs- Carrying out periodic preventive maintenance of the air conditioners as per the direction of the Engineer-In -Charge /Site Engineer including washing with water / detergent, filter cleaning, coil cleaning, checking of electrical wiring, curr ent, gas pressure, replacement of components as required etc. so as to maintain the ACs in good working condition. During maintenanc e, all parts of the AC has to be monitored regularly and in case of non–functioning of any parts, the same has to be informed to Eng ineer-In-Charge. The Periodic preventive maintenance shall be carried out every Month. The maintenance report to be submitted to the Engineer-In-Charge, indicating the functioning of all parts. In case of Breakdown of Package AC unit within a month, the breakdown has to be attended within 24 hours and no extra cost will be charged.The supplied Contactor, OLR,PCB, Belt, Blower shaft, Blower Be aring and HPLP Trip switch of Package AC Units has to be fixed during breakdown. The supply of Contactor, OLR,PCB, Belt, Blower shaf t, Blower Bearing and HPLP Trip switch will be paid seperately as per Line Items in SOR

Removal of old fan motor in the Indoor Unit and fixing new motor

Removal, Rewinding of Blower Motor and fixing of Blower Motor

Supply of PAC Spares

Supply of R-22 Gas

Supply of Fan Motor for Outdoor units for 5.5TR

Supply of Indoor coil (5.5 TR x 2)

Supply of Outdoor unit assembly (5.5 TR )

Supply of Copper Pipe 7/8 Inch

Supply of Drier (5.5 TR)

Supply of Expansion Valve (5.5 TR)

Supply of Compressor (5.5 TR)

Supply of Belt

Supply of Blower bearing (5.5 TR)

Supply blower Shaft (5.5 TR)

Supply of Contactor

Supply of OLR

Supply of HPLP Trip switch

Supply of Pressure gauge in the suction and discharge lines of Package AC circuit (11.0 TR)

Supply of Compound gauge in the suction and discharge lines of Package AC circuit (11.0 TR)

Supply of PCB (5.5 TR)

Supply of Copper Pipe 1/2 Inch

Supply of Copper Pipe 5/8 Inch

Supply of Drier (8.5 TR)

Supply of Expansion Valve (8.5 TR)

Supply of Blower bearing ( 8.5TR)

Supply of PCB for 8.5 TR

Supply of Fan Motor /Outdoor 8.5TR units

Supply of Indoor coil (17 TR)

Supply of Outdoor unit assembly (8.5 TR)

Supply of Compressor (8.5 TR)

Supply of blower Shaft ( 8.5TR)

Supply of Spares for Split AC

Supply and Fitting of Thermostat of 1.5T Split AC

Supply and Fitting of Thermostat of 2.0T Split/Cassette/Tower AC

Supply and Fitting of Starting relay for 1.5T Split AC

Supply and Fitting of Starting relay for 2.0T Split/Cassette/Tower AC

Supply and Fitting of Condenser fan blade for 1.5T Split AC

Supply and Fitting of Condenser fan blade for 2.0T Split/Cassette/Tower AC

Supply and Fitting of Fan Blower for 1.5T Split AC

Supply and Fitting of Fan Blower for 2.0T Split/Cassette/Tower AC

Supply and Fitting of Fan Motor for 1.5T Split AC

Supply and Fitting of Fan Motor for 2.0T Split/Cassette/Tower AC

Copper Pipe (Extra) with insulation for 1.5T Split AC

Copper Pipe (Extra) with insulation for 2.0T Split/Cassette/Tower AC

Wiring Kit 1.5T Split AC

Wiring Kit for 2.0T Split/Cassette/Tower AC

50+6 mfd Capacitor

50+2 mfd Capacitor

45 mfd Capacitor

100/120 Capacitor for 1.5T Split AC

100/120 Capacitor for 2.0T Split/Cassette/Tower AC

2.5/4/5 mfd fan Capacitor for 1.5T Window ,1.5T Split,2.0T Split/Cassette/Tower AC

Supply and fixing of 32A MCB for 1.5T Window ,1.5T Split,2.0T Split/Cassette/Tower AC

Supply and fixing of Filter for 1.5T Split AC

Supply and fixing of Filter for 2.0T Split/Cassette/Tower AC

Replacement of Defective Compressor by new ISI mark Compressor (reciprocating/rotary ) of reputed company with one year guarantee in cluding commisioning and testing for desired performance for 1.5T Split AC

Replacement of Defective Compressor by new ISI mark Compressor (reciprocating/rotary ) of reputed company with one year guarantee in cluding commisioning and testing for desired performance for 2.0T Split/Cassette/Tower AC

Supply and installation of new PCB for Voltas/Blue Star/PANASONIC/VESTAR O-general Make Acs (including indoor and outdoor units for 1.5T Window,1.5 T Split , 2.0T Split/Cassette/Tower AC

Service of Split AC

Complete service of A/C including washin for 1.5T Split ac

Complete service of A/C including washin for 2.0T Split / Cassette /Tower

Topping up of refrigerant gas R-22 for 1.5T Split

Topping up of refrigerant gas R-22 for 2.0T Split / Cassette /Tower

Complete gas charging refrigert gas R-22

Rewinding and servicing of fan motor inc for 1.5T Split

Rewinding and servicing of fan motor inc for 2.0T Split / Cassette /Tower

Repair of PCB for Voltas / Blue Star / O

Fitting of Thermostat for 1.5T Split

Fitting of Thermostat for 2.0T Split / Cassette /Tower

Fitting of Starting relay for 1.5T/2T A

Fitting of Condenser fan blade for 1.5T Split

Fitting of Condenser fan blade for 2.0T Split / Cassette /Tower

Fitting of Fan blower for 1.5T Split

Fitting of Fan blower for 2.0T Split / Cassette /Tower

Fitting of Fan motor for 1.5T Split

Fitting of Fan motor for 2.0T Split / Cassette /Tower

Fitting of Copper pipe (Extra) with ins

Fitting of Wiring kit for 1.5T Split

Fitting of Wiring kit for 2.0T Split / Cassette /Tower

Fitting of 50+6 mfd capacitor

Fitting of 50+2 mfd capacitor

Fitting of 45mfd capacitor

Fitting of 100/120 capacitor for 1.5T Split

Fitting of 100/120 capacitor for 2.0T Split / Cassette /Tower

Fitting of 2.5/4/5 mfd fan capacitor

Fitting of MCB(32A)

Fitting of Filter for 1.5T Split

Fitting of Filter for 2.0T Split / Cassette /Tower

Service: Replacement of defective compressure of 1.5T Split

Service: Replacement of defective compressure of 2.0T Split / Cassette /Tower

Installation of new PCB

J L ENGINEERING SERVICES

Breeze Cool Service

TOOT MNE TECH PRIVATE LIMITED

ETA ENGINEERING PRIVATE LIMITED