REPAIR TO WORKSTATION/PARTATION, FLOORING, WALL PANELLING, FALSE CEILING, KOTA FLOORING, KITCHEN CABINET, ROOF TREATMENT, PATH, GARAGES AND PLINTH PROTECTION AND OTHER B/R WORKS UNDER AGE B/R-II OF GE(AF) SUBROTO PARK

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all specified and as directed.

M&L for vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and as directed.

M&L for vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all specified and as directed.

All as above item 3 but as on vertical surface of wall such as skirting/dado incl 10mm thick cement plaster (1:4) as in backing coat of tiles complete all as specified and as directed.

S&F non skid coloured ceramic tiles area of each tiles exceeding 0.11sqm but not exceeding 0.18 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:4 complete all as specified and directed

Material and labour for Glazed ceramic coloured tiles in vertical surface 300x450X (7-8)mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed in cement 1 :4 and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in floors finished even and smooth without using extra cement including demolition to existing PCC and removing from MoD Land complete all as specified and directed

M&L for Machine pre polished cut kota stone slab 20 mm(+-2mm) thick in tread of steps, and similar over cement screed 20 mm thick in cm 1: 4 base laid and jointed with grey slurry mixed with pigment to match the slab polishing as per up to four stories height, including demolition to existing stone slab and removing from MoD Land complete all as specified and directed

All as per item No 8 here in before but riser of steps, skirting on walls etc incl the surface with . jointed with grey slurry mixed with pigment to match the slab including rubbing and polishing

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5Sqm but not exc 4.00 Sqm each complete all as specified and as directed.

S&F aluminium powder coated any colour (minimum thickness of powder coating 50 micron) frame for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F for powder coated aluminium doors , (thickness of powder coating not less than 50 micron) alumonium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, anodised aluminium snap beading screws etc. complete all aspecified and directed

S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc.complete all as specified and directed.

S&F as in repair Aluminium(extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed and specified.

S&F as in repair brass body Mortice lock, vertical type,size 100 mm 4 lever, incl escutcheon plate and two No keys fixed complete all as specified and directed .

S & F in repair 150mm long floor door stopper of aluminium alloy and tongue with hard drawn steel spring complete all as specified and directed.

Dismantling Wall panelling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE all as per , at any height complete all as specified and as directed by Engr-In-Charge.

M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls, PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of walls, finished even and smooth ( without using extra cement) including taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as up to four stories bldgs specified and directed

M&L for rendering CM (1:4) 15 mm thick on fair faces of brick surfaces or concrete surfaces even and smooth without using extra cement up to four stories bldgs including taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as up to four stories bldgs complete all as specified and directed

M&L for rendering CM (1:3) 5 mm thick on concrete surfaces of ceiling, even and smooth without using extra cement up to four stories bldgs including taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as up to four stories bldgs complete all as specified and directed.

M&L for preparation of new surface and applying two coat of oil bound distemper on wall/ceiling surface incl Priming with alkali resistant priming paint over a coat of wall care putty complete all as specified and directed .

M&L for preparing surfaces of new plaster Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed

Complete removal or existing treatment on wall/roof projections including facia cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed.

M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and also 1mm thick wall putty as required for levelling and applying one coat of primer as required and one coat of oil bound distemper (Oil emulsion any tint) on wall by air less spray machine (Machanical means) complete all as specified and directed (Make:- M/s Asian Paints/Nerolac/Berger or equivalent).

Material & Labour for Old plaster surfaces of finishing walls with paint of required shade applying Two or more coats of 100% Premium acrylic emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over including 1mm thick wall care putty over Old surfaces complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast or equivalent.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specification including dismantling complete all as specified and directed

S&F in repairs vitreous china wash hand basin of size 630mm x 450mm including pvc connection, CP waste coupling 32mm size half threaded with 130mm height complete all as specified and directed

S & F Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal aginst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement, fixing brackets, waste pipe with coupling, gratting and Union for discharge pipe complete all as specified and directed

Dismantling water tanks exc 250 but not exc 500 ltrs capasity and removing to store complete all as specified and directed .

S&F Rotational moulded polyethylene 500 Ltr water storage tanks triple layers as per IS (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and directed .

Dismantling water tanks exc 500 but not exc 1000 ltrs capasity and removing to store complete all as specified and directed .

S&F Rotational moulded polyethylene 1000 Ltr water storage tanks triple layers as per IS (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and as directed .

Dismantling water tanks exc 1000 litres but not exc 2000 Litres, and removing to store complete all as specified and as directed

S&F Rotational moulded polyethylene 2000 Ltr capacity tripple layer (white colour) (cylindrical vertical with closed top) hoisted and fixed as specified in SSR Part-I and directed

S&F as in repair 20mm bore gun metal globe balve ot gate valve with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed

S &F as in repair 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed complete all as specified and directed.

S&F in repairs angle valve ,stop valve, cast copper alloy, chromium plated with crutch or butterfly handle, fancy type screwed both ends for iron pipe of 15mm bore. complete all as specified and directed

S&F in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover complete all as specified and directed

S&F in repair 10 ltr capacity PVC valveless, syphonic F100action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed

S&F in repairs 15 mm bore bib taps cast copper alloy chromium plated and fancy type with crutch or butter fly handle high pressure screwed down for pipes etc complete all as specified and directed

S&F in repairs stainless steel Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair stainless steel sink without drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed

S & F for repair 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .

S&F in repairs stainless plate rack of size 900mmx750mmx250mm depth size made out of 0.75mm thick sheet complete all as specified and directed.

M & L for complete removal of existing roof treatment with mud faska including bedding layer and disposed from MOD Land complete all as specified and directed .

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge.

S & F of rolled mild steel sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafters, drain cover, running rails, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-290 Grade E-165 including dismantling complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc up to four storey height building chromate complete all as specified and directed by Engr In Charge.

M/S MG GROUP (BID ID -3439423)

Ashish Sehgal and Co. (BID ID -3436417)