Interior Fit Out works at National Media Centre, Le Meridien, Raisina Road, near Hotel, Windsor Place, New Delhi, Delhi 110001

S.No. Description of Works Amount

Amount (DSR, in Rs.)

1 Dismantaling and Anti Termite Treatement 151,764.20 9,675.00

2 Masonry & Plaster 747,160.20 19,000.00

3 Flooring Paving & Wet Works 552,244.35 818,418.32

4 Partitions, Cladding & Woodworks 11,287.50 3,285,008.84

7 Finishes & Miscellaneous 304,671.80 1,057,742.00

Correction factor on DSR @ 0.973 2,335,494.55

GRAND TOTAL (Carried Forward) 8,907,785.72

GRAND TOTAL (Carried Forward) 8,907,785.72

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

SR. NO. DSR REF. NO. DESCRIPTION UNIT QUANTITY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

A DISMANTALING

Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 150.00 113.35 17,002.50

Demolishing cement concrete manually / by mechanical means including disposal of

material within 50 metres lead as per direction of Engineer-in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) CUM 15.00 2,434.25 36,513.75

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel

15.3 bars and disposal of unserviceable material within 50 metres lead as per direction of CUM 5.00 3551.25 17,756.25

Engineer - in- charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter

15.12.1 including chowkhats, architrave, holdfasts etc. complete and stacking within 50 Each 13.00 367.20 4,773.60

metres lead of area 3 sq. metres and below.

Dismantling old plaster or skirting raking out joints and cleaning the surface for

15.56 plaster including disposal of rubbish to the dumping ground within 50 metres lead. Sqm 250.00 54.65 13,662.50

Dismantling steel work manually/ by mechanical means in built up sections without

15.19 dismembering and stacking within 50 metres lead as per direction of Engineer-in- Kg 420.00 3.85 1,617.00

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

15.52 stacking of useful materials near the site and disposal of unserviceable materials Each 2.00 112.05 224.10

within 50 metres lead.

Demolishing brick work manually / by mechanical means including stacking of

3 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as

per direction of Engineer-in-Charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false

4 15.57 ceiling including disposal of unserviceable material and stacking of serviceable SQM 150.00 56.35 8,452.50

material with in 50 meters lead as directed by Engineerin- charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

1.09 approved municipal dumping ground or as approved by Engineer-in-charge, beyond Cum 40.00 263.95 10,558.00

50 m initial lead, for all leads

including all lifts involved.

Providing Pre-constructional anti- termite treatment and creating a chemical barrier

to the building by injecting chemical emulsion of required concentrations under

grade slab and Grade beam, all-round the junction of wall and floor, surrounding of

pipes, side walls etc.as per instructions of chemical manufacturer and all as directed.

The treatment shall be carried out strictly in accordance with the technical

MR specification and conforming to IS 6313 or equivalent BS specification. The chemical Ltr. 45.00 215.00 9,675.00

to be used as insecticides for the treatment shall be Imidacloprid 30.5 percent SC,

dilution per litre of water 2.1 ml (1:476) strictly in accordance with IS 6313 (Part-2):

2022 or as per manufacturers specification whichever is higher. Chemicals

Concentration, Imidacloprid 30.5 percent SC 0.075%

Digitally signed by AMIT

TOTAL FOR DISMANTALING 151,764.20 9,675.00

B MASONRY AND PLASTER

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded

stone aggregate 40 mm nominal size derived from natural sources)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

2 11.3 aggregate) finished with a floating coat of neat cement, including cement slurry, but

excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 180.00 614.20 110,556.00

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150

mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum

conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V

level with RCC band at sill level and lintel level with approved block laying polymer

modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The

payment of RCC band and reinforcement shall be made for seperately).

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick

Extra for providing and mixing water proofing material in cement plaster work in per bag of

proportion recommended by the manufacturers. 12mm cement plaster 1:3 (1 50kg

13.21 cement :3 sand) = 10 sqm or 1.47 bags of cement used in the mix. Cement required cement 1836.00 22.1 40,575.60

for 10 sqm =0.144x510= 73.44kg. Water proofing material required @0. 1 kg per 50 used in the

kg of cement = 0.147 kg. mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up

to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above plinth level up to floor five level, excluding the

cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :

1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20

mm nominal size derived from natural sources).

6 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 30.00 736.40 22,092.00

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing

in position and binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 190.00 107.85 20,491.50

Digitally signed by AMIT

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with

water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air

8 22.5 cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with SQM 30.00 617.05 18,511.50

water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air

cure for 4 hours followed with water curing for 48 hours. The rate includes

preparation of surface, treatment and sealing of all joints, corners, junctions of pipes

and masonry with polymer mixed slurry.

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk or

Raised Areas as a Back fill or platform. Laying should be done in layers with

9 MR pounding done at every level to ensure a proper cavity free installation without CUM 4.00 4,750.00 19,000.00

disturbing any existing services in the area. Cost to also include haunching for

plumbing pipes.

TOTAL FOR MASONRY AND PLASTER 747,160.20 19,000.00

C FLOORING, PAVING AND WET WORKS

For Door / Window sill & Soffits:- Providing and fixing 18-20 mm thick gang saw cut

Granite, mirror polished, premoulded and prepolished, machine cut for window sills,

similar locations of required size, approved shade, colour and texture laid over 20

MR mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with Sqm 6 2250.00 13,500.00

white cement, mixed with matching pigment, epoxy touchups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc. complete at all

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

1 8.31 Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement SQM 52.00 1,267.95 65,933.40

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of matching shade

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS :

15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume

Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with

white cement and matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of upto 5 mm width, using epoxy

grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener

and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per

direction of Engineer-in-charge.

Digitally signed by AMIT

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15

4 MR micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed to conceal RMT 70.00 310.00 21,700.00

screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,

of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick

11.46 bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching

pigments etc. complete.

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid

in required pattern in linear portion of the building all complete as per architectural

drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of

5 11.51 cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement

slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with

pigment to match the marble shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark

Emperadore etc.

Providing and laying machine cut, mirror polished Marble stone flooring, in required

design (Simple geometrical, abstract etc.) and in patterns in combination with Italian

marble stones of different colours, shades and finished surface texture etc., in linear

portions of the building, all complete as per the architectural drawings, with 18 mm

6 11.52 thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm,

including pointing with white cement slurry admixed with pigment to match the

marble shade, including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark

Emperadore etc.

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for

wall lining (veneer work) including dado, skirting, risers of steps etc., in required

design and pattern wherever required, stones of different finished surface texture,

on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and

jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement

slurry admixed with pigment of matching shade, including rubbing, curing, polishing

etc. all complete as per Architectural drawings, and as directed by the Engineer-in-

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark

Emperadore etc.

Digitally signed by AMIT

Providing, mixing and installing self levelling compound high quality synthetic resins,

special cements and selected fillers so that, when mixed with water, it produces a

free-flowing mortar with self-levelling properties. The mixed mortar can be applied

to a average 10mm thickness in a single pour and can be bulked up to 30 mm with

usage aggregates, retaining its free-flowing properties Bulk density of powder

approx. 1.3 kg/l , Ball Impact Hardness After 1day 6.5 mm, Scratch Hardness After 1

day 1.6 mm Compressive Strength 2 After 28 days (min) 20 N/mm ²and free flowing

rapid hardening, levelling and smoothing compound designed to produce a smooth,

flat surface when applied to hard, rigid sub-floors such as cement sand screeds,

concrete, etc. strictly following the manufacturere instructions and complete.

Supply of modular carpet of approved model and shade and made with 100% nylon

6/6.6 tufted textured tiles/ plank of all sizes as approved, stain resistant, anti

microbial, and having colour fastness to water, fastness to light, rubbing fastness

and castor chair suitability as per relevant standard for heavy commercial usage,

with 100% PVC free Backing with having average density 6000 oz/cu. yd. or

more,Nominal total thickness of 5.9mm, and Pile weight – 16-18 oz/ sq yard.

Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled content

complying to GRIHA requirement, including fixing with GRIHA compliant adhesive of

approved make, minimum 15 years manufacturer's warrantee, all complete as per

drawings, manufacturer's specifications and direction of Engineer in Charge

Supplying and installation of engineered wooden flooring of min 14mm thickness

and a min 1900mm length along with a minimum width of 190mm. Wood Veneer

top layer of min 3mm thickness.The plank should have a 3 layer construction with a

click n lock interlocking system.

TOTAL FOR PAVING & WET WORKS 552,244.35 818,418.32

D PARTITIONS CLADDING AND WOODWORKS

PARTITIONING - Partition using 12mm thick (±0.5mm) HDHMR fixed on both sides

on aluminium Studs Frame 50mm x 50mm x 1.5mm as per approved sample and

1 MR architectural drawings placing the same 600mm c/c. Aluminuim frame to be fixed to SQM 35.00 4,817.51 168,613.01

floor and RCC Ceiling using fastners. The cost to include finishing visible edges with

12mm thick mdf strip as per detail drawings.

PANELLING- Panelling using 12mm thick (±0.5mm) HDHMR fixed on one side on

Aluminium Frame 50mm x 25mm x 1.5mm as per approved sample and

architectural drawings. Aluminium frame to be fixed to walls, floor and RCC Ceiling

using fastners.

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer

of approved design and shade, cladded on to existing surfaces. (base rate upto Rs.

2150/- sqm). The cost to include finishing with melamine polish (specs to match item

for melamine polish under finishing sub-head).

Digitally signed by AMIT

Providing and cladding of 1.25mm (+/-0.1mm) thick high pressure decorative

laminates (conforming to applicable IS:2046-1995, EN 438-3: 2016, NEMA LD3-2005

quality standard), made from urea free, thermosetting phenolic resins treated Kraft

papers as core material and Amino plastic resin treated decor papers on the finish

surface. Product meeting Performance properties

Resistance to surface wear (350 revolutions),

Resistance to cigarette burns (Rating-Not worse than 3),

Resistance to staining (Rating5),

Resistance to dry heat at 180C (Rating-4),

Resistance to cracking (>4 rating) & Resistance to scratching (>2.0 N) and

Resistance to Color Change-Xenon Arch Lamp (Rating 5/Index 6).

density of 1.35g/cm3 and

other requirements as per applicable standard

Product must fulfil the criteria of Greengard-Gold, GRIHA & GreenPro certification

and comply with REACH list of restricted chemicals.

Surface of laminates accomplice the properties as per classification HGS Grade of

the respective standards

Color/Decor, size, and finish of laminates should be agreed and finalized conforming

to the product catalog and attributes committed therein.

The cost to include 4mm thick MDF. Laminate to be pasted on MDF using

appropriate adhevise and further fixed to existing partition/ paneling complete as

per instructions of engineer-in-charge.

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool

conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G

5 12.62 Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers and held and in SQM 35.00 322.50 11,287.50

position by criss cossing GI wire etc. complete as per directions of Engineer-in-

Providing and fixing frosted translucent cast PVC self-adhesive vinyl film (or

equivalent) with special CRYSTAL-effect finish to replicate sand-blasted appearance

on glass surfaces, featuring customized designs for privacy and aesthetic

enhancement.Film specifications: 2 mil (0.05 mm) thickness without adhesive / 8 mil

(0.8 mm) with adhesive, minimum tensile strength 3.5 lb/inch (0.6 kg/cm at 23°C),

MR adhesion after 24 hours ≥4 lb/inch (0.7 kg/cm) on glass, acrylic, and polycarbonate Sqm 25.00 1725.00 43,125.00

substrates.Includes surface preparation, precise cutting/application of custom

graphics, bubble-free installation, edge sealing, and protective measures during

curing period.All complete in all respects as per specifications, approved designs,

and direction of Engineer-in-Charge (EIC).

Digitally signed by AMIT

Supply and installation of single slat/double slat having size of 2400x600x13mm(+/-

0.5mm) thickness, backing of 12 mm PET panel with front facia of 1 mm laminate.

The product use for absorption of medium and high frequency range with NRC of

0.50 direct fix. Panel Should be anti fungal as per ASTM G:21 and also Non-toxic,

non-irritant, and fire compliance with safety standards confirm as per BS 476 Part 6

passes (Fire Propagation) & Part 7 class2 (Surface spread of flame) ,for interior

The product should be 100% make in india and OEM must have ISO CERTIFICATIONS-

complying to- IGBC membership

ISO 14184-2 (no formaldhyde)

ISO 9001 (Quality Mangement System)

ISO 14001 (Environmental Management System)

ISO 45001 (Ocupational helth & safety management system)

The cost to include all required

accessories and hardware complete as per satisfaction and instructions of engineer-

Supply and fixing of VMT Printed 20 mm LD PET FLAT panels which shall be

processed with VMT technology for surface customization, colour options and

pattern as per the designers requirement, the panel shall be made from- 100%

polyester fiber, with up to 70% recycled fiber. size of panel 2800mm x 1200mm (±

Panel Should be anti fungal as per ASTM G:21 and also Non-toxic, non-irritant, and

fire compliance with safety standards confirm as per BS 476 Part 6 (Fire

Propagation) & Part 7 (Surface spread of flame) ,ASTM E 84 Class A, EN 13501 part

1C, S2,d0 for interior applications. Noice reduction coefficient (NRC) - 0.70 with

Supply and installation of 12mm HD PET panels with density of 2400GSM in

approved colour with customized pattern as per the designers requirement, the

panel shall be made from-

-100% polyester fiber, with up to 70% recycled fiber. size of panel 2800mm x

Panel Should be mostiure resistant and also Non-toxic, non-irritant, and fire-

compliance with safety standards confirm to Class 1 Fire Ratings tested as per BS

476 Part 6 (Fire Propagation) & Part 7 (Surface spread of flame) for interior

applications. ASTM E84 class A, ASTM D 2859, BS 5852 PART 1.

Noice reduction coefficient (NRC) - 0.45 with direct fix method,

can be achive upto 0.70 with 50 mm gap with pet wool infill and Thermal

conductivity ASTM C 518 upto 0.05 w/mK.

The product should be 100% make in india and resistance to fungal growth As Per

OEM must have own manufacturing plant along with ISO CERTIFICATIONS-

complying to- IGBC Membership,

ISO 14184-2 (Release formaldhyde)

ISO 9001 (Quality Mangement System)

ISO 14001 (Environmental Management System)

ISO 45001 (Ocupational helth & safety management system)

The cost to include all required adhesive/ fixing arrangements complete as per

instructions of engineer-in-charge.

Digitally signed by AMIT

Providing & fixing decorative Poly décor fabric Wall Paper (on walls and ceiling)

9 MR of weight 475 g /sqm as per approved shade & design including prepration of SQM 45.00 4,100.00 184,500.00

surface with 2 coats of Nubin Glue based epoxy quote.

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass

manufactured industrially by curtain coating process with PU lacquer (50 micron

thick), opaque (if viewed against a support wall) conforming to EN 16477 standards

for back painted glass , of approved color by Architect/ Client fixed with compatible

Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack

free time of 10 to 30 mins compatible for installation of mirror and lacquered glass /

Foam based double sided adhesive tape for instantaneous adhesion, compatible

with mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to

10 M.R. 350 kpa) on a perfectly leveled 12mm thick water proof marine plywood / MDF / SQM 5.00 3,953.49 19,767.46

Mineral fibre board which is mounted on the RCC wall/any other structure. The

contractor should submit test reports for backpainted glass from manufacturer -

High humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02

standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross

Hatch Test ) standard The manufactured backpainted glass should be

environmentally friendly (no lead, no arsenic, no copper, noformaldehyde);

appropriate recycled content (12% post industrial / 6% post consumer); compressive

strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 18mm thick

HDHMR Board finished using 1mm thick laminate. The storage shall be complete

with all hinges, drawer glides and hardware from approved make. All internal

11 M.R. surfaces to be completed using balancing laminate. Including brass D-type handles SQM 2.00 10,450.00 20,900.00

for shutters and recessed type handles for drawers. Storage to be of all heights as

per design. Storage shutters to be made in solid laminate/ glass as per design and

VENEER STORAGE CABINET FOR GENERAL STORAGE- Out of 18mm thick HDHMR

Board finished using 4mm thick veneer and polished in melamine to match the

veneer cladding item. The venner to be same as the venner cladding under separate

sub- head above complete with all hinges, drawer glides and hardware from Hettich

or equivalent. All internal surfaces to be completed using balancing laminate.

Including brass D-type handles for shutters and recessed type handles for drawers.

Storage to be of all heights as per design. Storage shutters to be made in solid

veneer/ glass as per design and drawings. (base rate upto Rs. 2150/- sqm)

Supply and installation of wooden moudings and cornices fixed on existing walls/

partition/ ceiling as per design and drawing complete.

a upto 30 x 25 mm mouding/ cornice RMT 300.00 85.00 25,500.00

b upto 50 x 30 mm mouding/ cornice RMT 20.00 170.00 3,400.00

c upto 50 x 50 mm mouding/ cornice RMT 80.00 201.00 16,080.00

d upto 75 x 75 mm mouding/ cornice RMT 20.00 395.00 7,900.00

e upto 125 x 75 mm mouding/ cornice RMT 60.00 690.00 41,400.00

Digitally signed by AMIT

COUNTER - LAMINATE STORAGE WITH GRANITE TOP: Providing and fixing storage of

approved height and depth up to 650 mm with Caracas and Shutters/ Shelves /

Drawers to be made out of 25 mm thick BWP HDF board as approved by Engineer in

charge with all surfaces faced with upto 1.25 mm thick laminate and PVC edge

Banding as per the selection of the Engineer in charge. Storage to Comprise of

Adjustable shelves / Drawers with Auto close Telescopic channels along with Water

Dispenser & Dustbin Compartment provided with 150 mm Dia Grommet with SS 304

Swivel Lid and Flap Shutter. Cost to include 19/20 MM Thk PrePolished Granite on

Counter formed as with Double Granite fascia up to 40 mm height on all visible sides

as designed by Engineer in charge to make to be flush in level with adjoining

surfaces with machine cut & polished edges including splash-back up to 100 mm

height all laid/fixed with Adhesive of Suitable Grade.

COUNTER - LAMINATE STORAGE WITH ACRYLIC SOLID SURFACE TOP: Providing and

fixing storage of approved height and depth up to 650 mm with Caracas and

Shutters/ Shelves / Drawers to be made out of 25 mm thick BWP Ply board as

approved by Engineer in charge with all surfaces faced with upto 1.25 mm thick

laminate and PVC edge Banding as per the selection of the Engineer in charge.

Storage to Comprise of Adjustable shelves / Drawers with Auto close Telescopic

15 MR channels along with Water Dispenser & Dustbin Compartment provided with 150 SQM 1.80 19,600.00 35,280.00

mm Dia Grommet with SS 304 Swivel Lid and Flap Shutter. Cost to include Counter

Top formed with 25 mm Thk Marine Ply dressed with 12mm Thk Acrylic Solid Surface

and fascia up to 50 mm height on all visible sides as designed by Engineer in charge

to make to be flush in level with adjoining surfacesand splash-back up to 100 mm

height all laid/fixed with Adhesive as per the proprietary Acrylic Solid Surface

SUB TOTAL OF PARTITIONS CLADDING AND WOODWORKS 11,287.50 3,285,008.84

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as

per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the

ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with

1 12.45 nuts & bolts of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in

a direction perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

Digitally signed by AMIT

Including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of

painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

:2011 (Board with BIS certification marks)

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm

of approved texture, design and pattern. The tiles should have Humidity Resistance

(RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K,

Fire Performance as per (BS 476 pt - 6 &7)in true horizont al level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000

mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross

T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm

long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger

26.27.2 rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at Sqm 15 2,671.20 40,068.00

1200 mm centre to centre along main ‘T’. The system should rest on periphery walls

/partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of

0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm

centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of

all T-sections used in false ceiling support system shall be pre-painted with polyester

baked paint, for all heights. The work shall be carried out as per specifications,

drawings and as per directions of the engineer-in-charge. With 20 mm thick beveled

tegular mineral fibre false ceiling tile (NRC 0.7)

TRAP DOOR :- Providing & fixing Access Panel of size mentioned below having - 1.

Outer aluminium frame - thickness : 1.5mm ( plus 0.2mm thick powder coating)

Material : ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm (plus 0.2mm

thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame -

material: Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of

200g. 4. Corner fittings, outer frame - material: Hot dipped galvanized steel plate

Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard ( Knauf Brand)

Type: moisture resistant ( MR) in green plasterboard liner. 6. Screw ( self - drilling

black phosphate ) - Material: mild steel C1018 - 1022. 7. Sealing strip, width,

thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch lock ) -

Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steel Q235. 9.

Hinge - Thickness : 4.0mm, Length: 82mm; Material: SS2172 ( cold drawn steel wire

). 10. Powder coating - Color: white, RAL 9010/ or as approved complete as per

instructions of engineer-in-charge.

Digitally signed by AMIT

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and

made hardwood framings hung from ceiling @1000mm centre to centre with 2 nos

of 6mm thk. Commercial ply on vertical & 12mm thk. Commercial ply on horizontal

surface (straight & curved). Inclusive of finishing in Paint.

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by 4mm

thick veneer on 12mm Underlay commercial Ply fixed to a subframe made using

50mm X 50mm Kiln seasoned and chemically treated hollock wood fixed to RCC

ceiilng using Fastners complete as per the instructions of the Engineer In Charge.

The cost to including finishing of veneer with melamine polish (specs to match item

for melamine polish under finishing sub-head).

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm

to macth the specifications same as gypsum ceiling.

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the

mineral fibre/ gypsum ceiling. In order to make the Mineral Fiber/ gypsum ceiling

higher than the Gypsum Ceiling by upto 100mm as per drawings. (visible surface of

gypsum band to not exceed 100mm) including plastic emulsion paint.

Provinding and fixing of vertical & horizontal baffle system. The system

comprises baffles 40mm wide & 150 Deep thickness of minimum 0.5mm GMS,

installed at 150mm C/C . Baffle to be perforated having acoustic fleece pasted from

inside. The C shaped shaped carrier rails run perpendicular to the main baffles

profiles. Individual baffle lengths between 300 and 2400 mm can be

selected. Baffle are supplied with the end cap matching the similar finish of baffle.

Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015

approved by SIS. Substructure for POLYLAM® Vertical baffle system consisting of C

shape carrier of minimum 1.2mm thick installed perpendicularly to baffles, same

was hanged to wall with the help of wall anchor fasteners. Baffles to be connected

perpendicular to C shaped carriers with the help of baffle hanger brackets. The

primary profiles must be connected to one another with longitudinal splice

connectors. C shaped baffle carriers to be installed at maximum distance of

1200mm. in a length of 2400 mm baffles. Baffle width: 40mm Baffle height: 150 mm

Individual baffle lengths: Min.300/Max.2400mm Material: Minimum 0.5 mm GMS.

Surface: Selected Digitally printed Woodgrain finish having minimum 80 micron

paint thickness.

Manufacturer shall have the fully automatic powder coating system with power and

free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with

latest modern technology with fully automatic inline Pre-treatment using nano

technology, Inline automatic water Drying system after pre-treatment. Mode of

Measurements: Measurements shall be wall to wall without any deductions for

lights, diffuses, columns etc

SUB TOTAL OF CEILING 372,239.00 703,456.05

Digitally signed by AMIT

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in

rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly

filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire

9.136 rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 Metre 12.48 1,709.25 21,331.44

mm (minimum) alround the frame and fixing with dash fastener of approved size

and make, including applying a coat of approved brand fire resistant primer etc.

complete as per direction of Engineer-in-charge (Dash fastener to be paid for

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes

fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory

approved by Engineer-in-charge, with suitable mounting on door frame, consisting

of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out

of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation

material and fixing with necessary stainless steel ball bearing hinges of approved

make, including applying a coat of approved fire resistant primer etc. all complete as

per direction of Engineer-in-charge (panneling to be paid for separately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions

etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than

120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75

mm from the edges and 150 mm c/c , including applying a coat of approved fire

9.138 resistant primer/ powder coating of not less than 30 micron on G.I. beading, & sqm 4.20 40,405.55 169,703.31

special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS

16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of

required thickness having 60 minutes of fire resistance both integrity & radiation

control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer

Supply & Installation of (44x64mm) Door Frame with Stile doors with sound

reduction property upto STC 31dB

Door Frame: The Door opening shall be formed by custom aluminium door frames in

Black Anodized Finish It should have Deko door frame of size 44 x 64mm.

Shutter: Providing of 40mm thick Stile Shutter. The width of Door Frame will be

70mm with provisions for inserting glass and the glass used in the system shall be

10mm toughened Glass with necessary acoustic gaskets.

Hardware Black Powder Coated Finish or as approved

Hardware for Single Leaf: Flush hinges - 4 nos, 800mm D- Handle and dead lock with

Lever handle, Concealed Door Closer with hold open unit, Door Stopper, -X-Bottom

Hardware for Double Leaf: Flush hinges- 8 nos, Geze 35mm Back Set Narrow Stile

Dead lock with 300mm D Type Offset handle, TS3000V SLD Arm Door Closer with

hold open unit, Door Stopper, X-Bottom Seal, 600mm Long Tower Bolt, Astragal

Double Door Seal-3000mm-1 No's

Supply and installation of Deko Aluminium 55mm 'J' Type Endcap on both sides of

Gypsum Partition ( This Endcap is suitable upto maximum 110mm wall thickness)

1.2 Double Leaf Door Size : 1800 x 2400mm Nos 1.00 304,469.00 304,469.00

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood CUM 0.15 142,949.70 21,442.46

Digitally signed by AMIT

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10

mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone

aggregate 20mm nominal size).

Providing and fixing wooden architraves made of Second class teak wood, molded

profile, seasoned and well-dried, 20-25 mm thick and 50-60 mm wide, fixed to

door/window frames with nails or adhesive, with teak wood corners, including

necessary finishing melamine polish as per specification.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 2.40 2,392.65 5,742.36

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

on all edges of flush door shutters (over all area of door shutter to be measured).

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

gloss / matt/ suede finish with high density protective surface layer and reverse side

of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality. 1.5 mm thick

Providing & Fixing of S.S Towerbolt 300x12mm including fixtures complete as

approved by engineer in charge. (450mm size for door heights-2.4m)

Providing & Fixing of Rubber buffer 40mmx50mm including fixtures complete as

approved by engineer in charge.

Providing & Fixing of Rubber Door stopper including fixtures complete as approved

by engineer in charge.

Providing & Fixing of Overhead Door Closer including fixtures complete as approved

by engineer in charge.

Providing & Fixing of Lever Action Flush Bolt including fixtures complete as approved

by engineer in charge.

Providing & Fixing of Floor Bolt Sockets including fixtures complete as approved by

engineer in charge.

Providing & Fixing of Pull Handles & push Plates including fixtures complete as

approved by engineer in charge.

Supply and installation of mortise lock and lever handle. The body shall be made out

stainless steel. The finish of the body shall be as per approval. Complete as required

including all necessary fittings as per instrucitons and satisfaction of engineer- in -

Supply and installation of concealed type door closer. The body shall be made out of

pressure die-cast body in aluminium alloy. High quality hydraulic pressure oil.

Complete as required including all necessary fittings as per instrucitons and

satisfaction of engineer- in - charge.

Digitally signed by AMIT

SUB TOTAL OF DOORS 260,935.68 678,990.95

G FINISHES & MISCELLANEOUS

Finishing with Deluxe Multi surface paint system for interiors and exteriors using

Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat

of Special primer applied @ 0.75 ltr /10 sqm

Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete.

Polishing in high gloss/matt finish melamine clear polish on wood work in required

color/wooden shade texture with following process in the sequence as detailed

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with

sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and

allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample

water to remove excess sealer layer and make the surface further smooth after this

wet rubbing, then surface is applied with special grade melamine fillers to fill all the

small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on

which again a light wet rubbing is done this surface is further allowed to dry for 12

4. On this, 1st coat of melamine polish is applied with spray gun using melamine

clear polish and melamine thinner in required proportion. This 1st coat is allowed to

dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further

allowed to dry for 12 hrs. The final melamine polish is applied with compressor

pressure spray gun using melamine clear polish and melamine thinner mixed in

required proportion complete as per direction of Engineer-in-Charge. (Final coat to

be done in 1 or 2 layers without gap of time.)

4 MR Same as above but for moulding/ cornices for all sizes RMT 490.00 415.00 203,350.00

Steel work welded in built up sections / framed work, including cutting, hoisting,

5 10.25 fixing in position and applying a priming coat of approved steel primer using

structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 350.00 172.60 60,410.00

Painting with synthetic enamel paint of approved brand and manufacture to give an

13.61.1 Two or more coats on new work SQM 800.00 155.90 124,720.00

Preparation of complete set of civil and interior finishing drawings including details.

7 M.R. A qualified professional for the purpose shall be appointed after due appproval from NOS 1.00 400,000.00 400,000.00

Engineer In Charge.

Digitally signed by AMIT

Providing & Fixing of Duolite blind- Sheer with double honeycomb fabric. Blinds

with design option of Duolite having Sheer fabric on the top and double honeycomb

fabric on the bottom gives natural daylight to come inside and maintain privacy with

one headrail fabric consisting of ¾“Honeycomb within a Honeycomb” with 3 air

pockets for maximum energy effeciency. Duette fabric with high tear strength

constructed out of Anti static, resilent, colour fast & Sanitized Treated 100% spun

bonded non-woven polyester fiber & precision manufacture to form a hexagonally

shaped duette pleat with cellular construction.Headrail and bottomrail constructed

of aluminum alloy 6063-T6 internally and externally fit with color coordinated

components required for specified performance and designed for smooth, quiet,

trouble-free operation. The head rail shall measure 50mm*47.625mm*1.27mm

thick constructed of aluminum alloy 6063 T6 PER ASTM B221-85. Internally fit with

8 M.R. components required for specified performance designed for smooth, quiet, trouble- SQM 6.00 27,378.00 164,268.00

free operation. Finish to be standard Powder coated white finish with a thickness of

60-80 microns. The bottom rail measuring 47.625mm*11.68mm * 1.27mm thick

constructed of aluminum alloy 6063-T6 PER ASTM B221-85 with standard powder

coated white finish with a thickness of 60-80 microns. Fabric shall be constructed

from spun-bonded polyester fibre, precision manufactured to form a hexagonally

shaped, dual pleat, cellular construction. All cords & cord holes shall be fully

concealed inside the fabric structure. As each of the hexagonal cells is formed

individually, pleats operate independent of each other providing superior pleat

retention & structure strength. Fabrics meet all requirements of NFPA 701 small

scale flammability testing for commercial installation applications.Installation

brackets shall be of high tension spring steel suitable for overhead & wall mounting

& for use in conjunction with extension bracket. Extension bracket shall be press-

THROW RUGS: Providing and laying Rugs Broadlooms in Hand Tufted to Customised

9 design of approved size in locations as directed. The cost shall include all adhesive SQM 8.00 3,520.00 28,160.00

necessary items required for installation.

SITC of circular column made out of FRP with flutes, cornices, moulding etc. as per

design and shop drawings.

Signage Specifications

Providing and fixing signage of SS sheet of 304 grade as per approved size, sample

and fixed to proposed area with appropriate arrangement/ materials of approved

make complete in all respect, as per approved drawings and direction of Engineer-

InCharge. (font and size used as per drawing & approval.)

SIGNAGE TO BE MADE WITH LAMINATE / VENEER SURFACE OR GLASS & TOP OF

CHAMPAGNE METAL PROJECTING OR BLACK TEX ON 3M VINYL PASTED ON FROSTED

GLASS of board size 150x170 mm (word or sentence language to be provided by

Client department)

SIGNAGE TO BE MADE WITH 4MM THK CHAMPAGNE FINISH SS LETTERING / FIGURE

CUT TO DESIGN & PASTED OVER EXISTING WALL of board size 200x200 mm (word or

sentence language to be provided by Client department)

SUB TOTAL OF FINISHES 304,671.80 1,057,742.00

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

SR. NO. ITEM UNIT QUANTITY RATE AMOUNT Ref. Image

Supply and placing in place of training chair. The overall size of Chair shall be: Total height 885 +/-5 mm, Back

Width 415mm at Top and 470mm at bottom, Seat Width 490 +/-3 mm, Seat Depth 465+/-3 mm and Seat height

495mm +/-5mm . Over all chair width should be 600 +/-5mm and Overall chair depth should be 585 +/-5mm. Seat

shall be upholstered with 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering

within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used.

The chair shall be supplied with Mesh at the back rest. The OEM shall have ISO 9001, ISO 14001, Bifma Level 2,

Green Guard by UL, India Design Mark & IGBC Gold rated factory certification.. The chair shall be supplied with

1 injuction moulded Back rest with material of PA620%GF. The Chair understructure should be provided with NOS 60.00 12,500.00 750,000.00

25.4x1.6 mm thickness Round tube. understructure shall connected with 4nos 50mm dia Twin castors PA6 material

complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated.

Understructure shall powder coated upto 40microns. Fixed arms connected to Back rest with Textured arm pad

with size of 290x38x3.5mm. Understructure shall powder coated upto 40 to 60microns. Injection moulded ABS

writing tablet with370mm lenght, 265mm width and 10 thickness shall assembled for arm rest. Tolerance of +/-

5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe

thickness & Pipe sizes.

2 Sofa Sets (3 Seater and 1 Seater)

Supply, fabrication, transportation and installation of customized three-seater sofa of size approx. 1960

mm × 790 mm × 690 mm, constructed with solid hardwood frame of superior quality. The seating and

backrest shall be made with high-resilience foam (minimum 40–45 density) ensuring long-term comfort

and shape retention. Upholstery shall be premium fabric/leatherette with high durability and neat

stitching finish. Legs shall be of solid wood/metal with anti-skid buffers. All exposed wooden parts shall

2.1 have PU/melamine polish. The sofa shall be complete with all fittings, finishing and alignment as per NOS 1.00 95,002.00 95,002.00

approved design and site requirements.

Supply, fabrication, transportation and installation of single-seater sofa of approximate size 840 mm ×

865 mm × 920 mm made from seasoned solid hardwood frame with robust construction. The seat and

back shall be cushioned with high-density foam (minimum 40 density) and upholstered in premium

quality fabric with uniform stitching and finish. Armrests shall be ergonomically designed for comfort. All

wooden components shall be finished with approved shade melamine/PU polish. The unit shall be stable,

wobble-free and complete in all respects including cushioning, upholstery and installation as per site

Digitally signed by AMIT

Supply, fabrication and installation of center table of approximate size 1150 mm × 850 mm × 450 mm

made from solid hardwood (Sheesham equivalent) with top finished in natural marble of 18–20 mm

thickness. The wooden structure shall be properly seasoned, joined using strong joinery techniques and

finished with melamine/PU polish. The marble top shall be machine-cut, edge-finished and polished to a

smooth glossy surface. The table shall be structurally stable with proper load-bearing capacity. The item

shall be complete with all finishing, edge detailing and placement as per site requirements.

Supply, fabrication and installation of wooden side table of approximate size 500 mm × 550 mm × 550

mm made from high-quality seasoned hardwood. The table shall be constructed with proper joinery

ensuring durability and stability without wobbling. All exposed surfaces shall be finished with multi-layer

melamine/PU polish in approved shade. Edges shall be smooth and rounded for safety and aesthetics.

The table shall be suitable for regular use and shall be delivered in complete finished condition including

installation as per site requirements. NOS 4.00 12,500.00 50,000.00

Supply, fabrication and installation of premium wingback chair of approximate size 700 mm × 760 mm ×

1020 mm made from solid hardwood frame with classic high-back design. The chair shall be upholstered

using high-density foam (minimum 40 density) and premium fabric/leatherette ensuring comfort and

durability. The structure shall be reinforced with proper joinery techniques for long-term performance.

Wooden components shall be finished with melamine/PU polish of approved shade. The chair shall be

5 ergonomically designed, aesthetically finished and complete in all respects including upholstery, polishing NOS 1.00 18,500.00 18,500.00

6 Supply, fabrication and installation of side table of approximate size 550 mm × 350 mm × 550 mm made NOS 1.00 13,500.00 13,500.00

from solid hardwood frame with top finished in natural marble. The wooden structure shall be seasoned

and finished with melamine/PU polish, while the marble top shall be polished and edge-finished for

smooth appearance. The table shall be stable, durable and suitable for regular usage. Proper care shall be

taken for alignment, finishing and installation. The item shall be complete in all respects as per approved

design and site requirements.

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

DSR 2025 Ref. NDSR

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount

Supplying, Installation, Testing & Commissioning of Modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable

for cooling/heating having 100% hermetically sealed inverter type twin

Rotary/Scroll Compressor(s), minimum two compressors (with individual separate

PCB) for above 14HP modules, microprocessor based Controller, top discharge

type condensing unit(s), with R-410-A refrigerant or equivalent, vibration Isolators

with suitable foundation etc. complete as required. To have better efficiency

condenser fan shall be capable to operate at different speed with respect to

load. The unit shall deliver the rated capacity and in confirmation as per IS

18728:2024 and CPWD Specifications and work even at 50°C ambient

temperature without tripping. The system shall be able to deliver 100% of the

31.1 rated capacity upto 39 0C. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with

first charge of the refrigerant and ready for use as required. The condenser should

be coated with a hydrophilic film to prevent water accumulation on the surface

of the heat exchanger, enhance water dispersion, and reduce the risk of

degradation, thereby improving overall performance and durability. The Indian

Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy

Conservation and Sustainable Building Code (ECSBC) 2024 as below and

complete as per CPWD specification, connections, inter connections etc. as

required. (For capacity <40 kWr ISEER 5.4, Capacity > 40 and <70 ISEER 5.5,

Capacity > 70 ISEER 5.6 for ECSBC Building)

For Cooling or Heating or Both

2.0 INDOOR UNIT

Supplying, Installation, Testing and Commissioning of following minimum capacity

4 way Cassette Type Indoor ceiling mounted unit equipped with synthetic

washable media pre-filter, fan section with low noise fan/dynamically balanced

blower, multispeed motor, coil section with DX Copper coil, electronic expansion

valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation,

31.4 Corded remote control etc., suitable for operation on single phase 230 V ± 10%,

50Hz AC supply, complete, as required. The Indoor units must shut down upon

receiving a singal from the BMS System/Fire Singnals. The system shall be capable

to adjust air flow as per room requirement in auto mode. The cooling capacity of

indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature.

(Make will be same as of Outdoor)

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

DSR 2025 Ref. NDSR

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount

Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners

complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant

piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU

to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R- 407 Green

Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high

voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air

circulation of following capacity with Scroll / rotary compressor. The system shall be able to

8.2.6 deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Nos. 2 41959.00 83918

Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply :

Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical

Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS

2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The

system shall be able to operate up to 50 0C (out door ambient temperature). Inverter Type - Hot &

Cold 1.5 TR with 5 Star BEE Rating

3.0 REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant

piping for VRV/VRFsystem, complete with fittings, with suitable adjustable ring

31.14 type hanger supports, jointing/brazing including accessories, insulated with XPLE

Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber

tubular sleeves sections of specified thickness as given below for Suction and

Liquid lines, all accessories as per specifications etc. as required :

3.1 31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 60.00 256.00 15,360.00

3.2 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 60.00 346.00 20,760.00

3.3 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 30.00 487.00 14,610.00

3.4 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2mm Rmt 30.00 615.00 18,450.00

3.5 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 20.00 739.00 14,780.00

3.6 31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2mm Rmt 30.00 904.00 27,120.00

3.7 31.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2mm Rmt 10.00 1,068.00 10,680.00

3.8 31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2mm Rmt 80.00 1,157.00 92,560.00

4 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with

fittings, supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and

accessories as per specifications, drawings.

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

DSR 2025 Ref. NDSR

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount

Supply, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same

Original Equipment Manufacturer (OEM) make as of ODUs and IDUs

Indoor Units Nos. 9.00 4535.00 40815

Supplying and installaton following size of perforated painted with powder coating M.S. cable

trays with perforation not more than 17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI

angle, bolts & nuts, painting suspenders, fastener etc as required.

4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Rmt 55 866.00 47630

6 Control & Trasmission Wiring

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR

1.7.1 PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 Rmt 350 370.00 129500

X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

MR Chiseling Work Rft 15 40.00 600

MR ODU Stand Nos. 10 4400.00 44000

MR Refrigerant Charging of R410 A gas as per requirement at site. Kg 50 1237.00 61850

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single

1.17.12 core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm. Rmt 50 148.00 7400

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

SUMMARY OF ELECTRICAL WORKS

SUB HEAD DSR AMOUNT (Rs.) NDSR AMOUNT (Rs.)

1 DISTRIBUTION BOARD Rs. 144,495 Rs. 43,357

2 WIRING Rs. 1,853,305 Rs. -

3 LIGHTING FIXTURES Rs. - Rs. 1,333,711

4 PASSIVE NETWORK SYSTEM Rs. 280,744 Rs. 112,054

5 CABLE TRAY.& RACE WAY. Rs. 86,820 Rs. 142,490

6 UPS SYSTEM Rs. 580,065 Rs. -

7 FIRE ALARM & PA SYSTEM Rs. 667,212 Rs. -

GRAND TOTAL Rs. 5,244,254

GRAND TOTAL Rs. 5,244,254

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

A DISTRIBUTION BOARD

Supply , installation ,testing and commissioning of 'MCB double door Distribution Boards

dust and vermin 'proof protected and AC supply operation including incoming

1 MCB/ELCB/RCBO as per specifications and required capacity Neutral bar and Earth

Terminal complete as required and installed in concealed in wall after necessary chase

cutting with finishing /surface on wall including all fixing materials required.

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming and 36 nos (6-32A-10KA

)SP MCB as outgoing.(ACDB)

8Way SPN MCB DB with 40A DP RCCBas incoming and 8 nos (16-20A-10KA )SP MCB as

outgoing.(For Server)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution

board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

2.3.3 8 way , Double door Each 2 2773.00 5,546.00

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of

2.50 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs 0.00

(but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally

used where 3 phase outlets are required.)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with 0.00

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes

in the existing MCB DB complete with connections, testing and commissioning etc. as

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

Supplying and fixing following rating, 240 volts, "C" curve, miniattlre circuit breaker suitable

for lnductive loads of following poles in the existing MCB DB complete with connections, 0.00

testing and commissioning etc. as required.

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed 0.00

conduit as required

Total of DB carried over to summary 43,357.30 144,495.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V

grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in &

1 including 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732

including all accessries such as junction boxes , conduit bends, elbows and ceiling rose , and

anodised GI switch box with modular switch ,modular plate and the box covered with front

a 1.3.3 One light point controlled by one 6A switch Per Pts 35.00 1,845.00 64,575.00

b 1.54.3 Secondary light point controlled by same switch Per Pts 55.00 1,094.00 60,170.00

Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor

single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

2 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 200.00 327.00 65,400.00

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per mtr. 400.00 428.00 171,200.00

3 1.3.3 Exhaust fan point including of ceiling rose near fan. Per Pts 2.00 1,845.00 3,690.00

Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 20.00 122.00 2,440.00

d 1.24.5 6 pin 15/16 A socket outlet Each 30.00 197.00 5,910.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in

1.57 recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, Metre 250.00 807.00 201,750.00

"C" curve including connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring along with earth wire with the following sizes of

1.70 FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel

conduit as required.

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 150.00 476.00 71,400.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 180.00 652.00 117,360.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

7 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 50.00 47.00 2,350.00

existing surface/ recessed steel/ PVC conduit as required.

1.20 Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

8 including painting in case of surface conduit,or cutting the wall and making good the same

in case of recessed conduit as required

Total of Wiring carried over to summary 0.00 1,853,305.00

C LIGHTING FIXTURES

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

SITC of 15W Recess type IP40 LED Round shaped Downlighter fitting made of Aluminum

Pressure die cast housing duly powder coated and opal diffussser, having CCT range 5700K,

system efficacy ≥ 110lm/W (not LED Chip efficacy), CRI≥80, SDCM < 3, Mimimum System

Ouput ≥ 1650 Lumens, useful life of 50,000 hrs at L70 & driver having isolated constant

current topology with PF ≥ 0.95, THD<10%, Operating voltage range: 100-265V AC and

1 MR Surge Protection of 2.5KV suitable for installation on the false ceiling including connection Nos. 30.00 1,560.00 46,800.00

with 3X1.5 sq.mm FRLS PVC insulated copper conductor,earthing etc complete as required.

The LED fitting must have the embossed/engraved logo the approved make (fittings with

stickers shall not be approved). BIS Certificate issued to the approved make along with

LM79 report from NABL lab must be shared at the time of supply. Cut-out dimension: ø145

± 2mm, Fixture dimension: ø159 X 39mm (±2mm), Weight: 0.335gm

SITC of Extruded Aluminium suspended/ surface mounted 36Watt, 4000 lumen LED batten

with PC Diffuser and Spring Steel Clamps for Surface Mounting arrangement. Driver

2 MR THD<15%, PF >0.9,with 2KV inbuilt surge protection. Internal wiring should have teflon Nos. 32.00 1,850.00 59,200.00

coted multi strand wires and external wire should have PVC coated multistrand wires.

Providing & Fixing Coverings (Ceiling & Wall) Made out of Polyester Kintted fabric Coated

with polyurethane (PU). The Fibric width 2m,3m,4.1m,&5.1m with Weight of 200gm/m^2.

thickness of 0.3mm. The appearance of fabric is Matl. smooth and uniform with blance

color and ligth transmission of 50%. The tear strength of fabric should be accordance to CH.

4.5daN; TR: 6.5 daN. The fire Railing should be accordance to B-S1, do. The febric should be

humidity ressistant and free of cercinogenic subtance (CMR) or volatile organic compounds

(VOC's). At lableing in accordance with the French decree no, 2011- 321, Oeko -Tex

standar100 certified. The fabric should be paintabe/printable with approved manufacturer

3 MR guidelines with 10-year manufacture guarantee. the Installation of fabric should be dry Sqm 10.00 9,400.00 94,000.00

installation 7done at room tamperature using CLIPSO PVC, ASB tension profiles P.CC/P-

C10QS/P-C11QS/P-CCB022/P-B1/P-CC1P. There are several lighting options available

including various LED options and fluorescent lighting. When Positioned properly. LED

Lighting modules provide an even light flow, casting no shadowns or hot spots. coverings

are used for a variety of aluminated applications, including but not limited to walls, ceiling,

lightboxs or wall frames. coverings can enhance your door with a variety of spacial effects

fiber optics or changinglights, or create a statement piece incorporating custom printing.

The cost of electrical cove light fixtures is included in the same.

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

connectors etc., as per the direction of the engineer In charge

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

SITC of 7W Recessed Fixed LED Spotlight, Body made of high grade di-cast Aluminium,

System Power 7W, 230V, CRI>80, Dia- 68mm X 65 H mm, cut out Dia 60mm color

temperature 3000K/4000K/5700K, Hi- Precision optics with Beam Angle 15°/24°/36°, IP20,

IK02, operating voltage range 140-270Vac, operating temperature -10° to 45°C, PF>0.95,

THD<10%, product efficacy>100lm/W, SDCM<5, L70B50@50000hrs, LED binning as per

ANSI Bin C78.377A, drivers efficiency >86%, internal surge protection of >2kV. The

manufacturer shall provide LM79, LM80, TM21, Photoboilogical safety as per IEC 62471,

RoHS complaint, BIS both for fixture and drivers.

6 MR SITC of chandlier as per design each 2.00 456,200.00 912,400.00

7 MR SITC of chandlier as per design each 1.00 130,011.00 130,011.00

Total of Light Fixture carried over to summary 1,333,711.00 0.00

D PASSIVE NETWORK SYSTEM

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG

Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4

pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-

39.17 568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating

Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and

Pulling Force: 11.5Kg etc. complete as required.

Supplying, Installation, Testing and commissioning of

RJ45 Connector for CAT 6/6A Cables. RJ45 modular plug supports 4 twisted pairs, 8

positions, 8 connectors. Housing: PC, UL94V-2, transparent color, Use for 24- 26 AWG

stranded wires etc. complete as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/

recessed Steel/ PVC conduit as required.

Supply, Installation, Testing & Commissioning of dual face plate having provision

#REF! for one I/O along with spring type shutter for dust proof, made of ABS PVC plastic Each 2.00 259.00 518.00

etc. complete as required.

Supply, Installation, Testing & Commissioning of single face plate having provision for

#REF! one I/O along with spring type shutter for dust proof, made of ABS PVC plastic etc. Each 10.00 196.00 1,960.00

complete as required.

Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must

be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch

Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-

568.2-D etc. complete as required.

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should

39.13 have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. 0.00

complete as required.

39.13.1 Copper Patch Cords of length 1m (3ft) Each 15 173 2,595.00

39.13.2 Copper Patch Cords of length 3m (10ft) Each 15 405 6,075.00

Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO)

with face plate of color as per site requirement, should have ETL/UL verification program

39.15 certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should Each 75 302 22,650.00

be from same OEM to maintain compatibility and interoperability etc. complete as required.

Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing

Rack with Main Frame Pillar of 1.25mm Powder Coated CRCA Sheet with removable side

panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely

knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 5nos

39.24 two line cable entry/exit provision at top and bottom with rubber protection, Front door Nos. 2 21201 42,402.00 42,402.00

5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or

perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6

sockets 16A power distribution

units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1

number, etc. complete as required.

Supply, Installation, Testing & Commissioning of 6 Core Armoured single Mode

Fiber optic cable, Central Lose Tube With Jelly Compound, Corrugated steel tape

armoured, Heaving 1300 nm Wavelength in the existing surface/ recessed Steel/ PVC

conduit etc. complete as required.

Supply, Installation, Testing and Commissioning of single Mode fiber SC-LC Duplex

MR patch cord of 2 Mtrs. for Gigabit Connection between Patch Panel and Switch etc. Each 2.00 5,322.00 10,644.00

complete as required.

Supply, Installation, Testing & Commissioning of Horizontal cable manager etc.

complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

1.21 accessories in surface/recess including cutting the wall and making good the

same in case of recessed conduit as required.

Total of Passive Network System carried over to summary 112,054.00 280,744.00

8 CABLE TRAY.& RACE WAY.

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels

fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats

8 etc.complete with providing of Anchor fastners and all necessary hardwares as required for

fixing, including cutting, bending, welding, drilling, bolting etc. as per design as required and

painted with one coat of primer and two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required

for fixing and including the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI

earth strips complete as per specifications, as required and as below.

8 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with

internal partition/compartmentized of the following sizes including providing removable 3

mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper

earth wire complete as required including floor supports, bends, access boxes, tap off

boxes and cross over as per specification and site requirement. (overhead / wall mounted

recovery & function boxes shall be 1.6 mm thick)

c 150 mm wide x 38 mm deep raceway RM 10.00 1,490.00 14,900.00

d 100 mm wide x 38 mm deep raceway RM 40.00 1,109.00 44,360.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

adjustable junction box 38- 90 mm including all accessories ss plate of 2mm thick complete

in all respect as per the directions of engineer in charge

Fabricating, supplying & installation on surface/ recess 2.0 mm thick factory fabricated GI

Sheet raceways height 50 mm and of totally enclosed with 2 mm thick covered. Two

8 lengths of raceways and junction box shall be joined together to make it dust proof.

Chipping and removing screed to install the junction box in floor, including removal and

disposing of debris / fixing in ceiling along with suspender and accessories as per instruction

of Engineer in charge.

c 200 mm (wide) x 200 mm (length) X 50 mm (height) Nos. 6.00 1,580.05 9,480.32

Total of Raceway carried over to summary 142,490.32 86,820.00

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

Online UPS- Input supply: Three Phase, Output

supply: Three Phase.

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity

Power Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to 95%, Online

double conversion true sine wave Uninterrupted hot swapable (allow for the replacement

or addition of battery modules without shutting down the entire system) modular Power

Supply (UPS) system with N+1 modules (N denotes total number of modules required for

rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30

minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS

rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and

Static Bypass switch along with provision for manual bypass, suitable isolation transformer

for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence

correction. The UPS systems offered are to be of the latest technology with Digital Control

Microprocessor based for

reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier &

inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design,

manufacturing and inspection process should confirm to the relevant Inter-national

standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96%

while operating on battery mode and delivering quality power to the 100% non-linear

loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% at 50 %load. (The

required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme

power factor kit to be included to limit the input power factor (PF) to 0.99 and output

power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS

shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be

suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage:

3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output.

Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under

voltage over voltage, abnormal out voltage, battery over charging, output over current,

short circuit protection, battery deep discharge protection, 10KV surge. UPS must comply

with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204

Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS. .

Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware

& software for iOT Communication as per approved by Engineering in charge. Required

battery racks and interconnecting copper conductor cables of suitable size and connectors

and all required accessories are inclusive of the cost). This system must provide a means for

logging and alarming of all monitored points plus email notification. Forced air-cooling with

integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least

80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in compliance

IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel (minimum) (In-build 5

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

Voltage, Capacity. e) Load: KVA, KW, Percentage. f) Temperature: STS, Inverter, PFC. g)

Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000

events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit /

Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power

failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation

/Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and

discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains

Failure, Battery Low Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage,

Output Over, Under Voltage, Battery Over, Under Voltage, Over Load and short circuit,

Over Temperature. The UPS should have QR code which should contain drawing, test

report OEM manual, Geo- Tag of manufacturing location etc

26.2.2 20KVA (Each Power module shall be < 10 KVA) EACH 1.00 341,772.00 341,772.00

Online UPS- Input supply: Three Phase, Output supply: Three Phase. Supplying, installation,

Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating

temperature 0 to 40 0C, Relative humidity 0 to 95%, Online double conversion true sine

wave Uninterrupted hot swapable (allow for the replacement or addition of battery

modules without shutting down the entire system) modular Power Supply (UPS) system

with N+1 modules (N denotes total number of modules required for rated capacity). The

UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery

VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time)

on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along

with provision for manual bypass, suitable isolation transformer for additional protection

against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS

systems offered are to be of the latest technology with Digital Control Microprocessor

26.20 based for reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the

rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design,

manufacturing and inspection process should confirm to the relevant Inter-national

standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96%

while operating on battery mode and delivering quality power to the 100% non-linear

loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% at 50 %load. (The

required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme

power factor kit to be included to limit the input power factor (PF) to 0.99 and output

power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS

shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be

suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage:

3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output.

Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under

26.2.1 10KVA (Each Power module shall be < 10 KVA) Each 1 208893.00 208,893.00

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

S.No Description Unit Qty Rate MR Amount DSR Amount

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Total of UPS system carried over to summary 0.00 580,065.00

Digitally signed by AMIT

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No DSR 2022. No. Description Unit Qty Unit Rate Total amount Total amount

Sr. No DSR 2022. No. Description Unit Qty Unit Rate Total amount Total amount

Supplying, installation, testing and commissioning of micro processor based

intelligent addressable main fire alarm panel, central processing unit with

the following loop modules and capable of supporting not less than 240

devices (including detectors) and minimum 120 detectors per loop and

loop length up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other keypad and

minimum 4000 events history log in the non volatile memory (EPROM),

power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The panel shall have

facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of

the schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with open

protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog

2 17.2.4 addressable photothermal detector complete with mounting base Pcs 15.00 2,858.00 42,870.00

complete as required.

Supplying, installation, testing & commissioning of intelligent addressable

3 17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor Pcs 1.00 2,726.00 2,726.00

complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call

point complete as required.

Supplying, installation, testing & commissioning of addressable strobe

complete as required.

Supplying, installation, testing & commissioning of fault isolator complete

with base as required.

Supplying, installation, testing & commissioning of response indicator on

7 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all Pcs 2.00 276.00 552.00

connections etc as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

1 17.5.2 rated with annealed copper conductor having XLPE insulation, steel wire RM 150.00 173.00 25,950.00

armouring & FRLS outer sheath complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of 6 zone, voice alarm

controller with USB, MP3 player (including 6 zone button paging station) with

seamless integration facility with main fire alarm panel for voice evacuation

complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50

Watt, 25V rms operating at 240 volt AC supply complete as required.

Digitally signed by AMIT

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No DSR 2022. No. Description Unit Qty Unit Rate Total amount Total amount

Sr. No DSR 2022. No. Description Unit Qty Unit Rate Total amount Total amount

Supplying, installation, testing & commissioning of ceiling/wall mounted

loud speaker, 3/1.5 Watt in ABS enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper

conductor cable in the existing surface / recessed steel conduit of following

pairs, cores and size including connections and interconnections etc. as

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 120.00 54.00 6,480.00

Supply and fixing of following sizes of MS conduit along with accessories in

2 1.20 surface /recess including painting in case of surface conduit,or cutting the

wall and making good the same in case of recessed conduit as required

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

BOQ FOR PLUMBING & FIRE FIGHTING

DESCRIPTION DSR (AMOUNT) NDSR (AMOUNT)

A SANITARY FIXTURES & FITTINGS 29,613.80 120,211.63

B WATER SUPPLY 181,046.70 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 320,543.40 2,300.00

D SPRINKLER PIPING & ACCESSORIES 218,841.00 34,628.00

Correction Factor on A, B and C by 0.973 516,861.39

Total Cost ( Carried Forward) in Rs. 735,702.39 157,139.63

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed

vitreous china single trap syphonic pattern having back

inlet, supporting chair, wall hung water closet complete

with all internal fittings/ accessories and CP brass flush

bend (European type) water closet with seat and lid, with

C.P. brass hinges and rubber buffers, adapter, rubber joints

fixed to W.C., C.P. brass screwed washers including cutting

and making good the walls and floors wherever required

and HDPE WC pan connector including jointing with white

cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat &

lid "Thermoset moulded ( bakelite ) IS 2548 Part I

Supply, installation, testing and commissioning of

concealed cistern including flush plate and all internal

fittings/ accessories including cutting and making good the

walls and floors wherever required complete in all respects.

Supply, installation, testing and commissioning of glazed

vitreous china wash basin with R.S. or C.I. brackets painted

white, 32mm C.P. brass waste of standard pattern , C.P

3 MR brass wall flange 32 mm dia. C.P. brass bottle trap and

union 32 mm dia C.P. pipes to wall flange. complete

including cutting and making good the walls wherever

Table top wash basin Each 2 8,650.00 17,300.00

Providing and fixing CP Brass Single lever telephonic wall

mixer of quality & make as approved by Engineer in charge .

17.22B 15 mm nominal dia. Each 2 6940.75 13,881.50

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing PVC waste pipe for sink including PVC

waste fitting Complete. Flexible Pipe

Supply, installation, testing and commissioning of 15mm

4 MR C.P. brass single hole wash basin mixer without popup Each 2 4,950.00 9,900.00

waste system with 450mm long copper pipes and brass nut

Providing & fixing toilet paper holding including cutting and

making good the walls.

Providing & fixing Horizontal liquid soap dispenser with

6 MR stainless steel lid and brackets fixed to wooden cleats with Each 1 3,715.00 3,715.00

C.P. brass screws.

Providing & fixing C.P. brass coat hooks fixed on toilet door

with C.P. brass screws

Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick

8 MR marine ply sheet ground fixed to wooden cleats with CP Sqm 3 1,850.00 5,550.00

brass screws and washerswith 40 mm wide teak wood

frame as per design including polishing

Providing & fixing Hand Shower (Health Faucet) with 8mm

dia, 1M long PVC tube and wall hook CP brass wall flange

Providing & fixing, testing and commissioning of storage

type electric water heater with automatic thermostatic

control electric element, pressure release valve, brackets

fixed to expansion fasteners with M.S. nuts and bolts all

complete including cutting and making good the walls

wherever required.

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

05 litres capacity (Horizontal /Vertical type1.5 kw electrical

15 litres capacity (Horizontal /Vertical type1.5 kw electrical

Providing & fixing wall mounted 25 mm dia Stainless steel

coated grab bar including cutting & making good the

Providing & fixing PTMT towel ring trapezoidal shape 215

mm long 200 mm wide with minimum distance of 37 mm

Providing and fixing stainless steel floor drain trap of

approved make with grated cover, conforming to IS 2556),

Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

wall flange of approved quality.

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Automatic Fragrance Dispenser machine complete with

refill can and 'C' size battery (2 Nos) for operation fixed to

wooden cleats with CP brass screws

Providing and fixing of stainless steel finish Paper Towel

14 MR Dispenser having capacity of 300-350 paper towels fixed to Each 1 5,150.00 5,150.00

wooden cleats with C.P. brass screws

Providing and fixing of wall mounted fully automatic hand

15 MR dryer in SS/ black finish as per approval complete will all Each 1 5,556.00 5,556.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel

plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required :

Digitally signed by AMIT

PRESS INFORMATION BUREAU- NATIONAL MEDIA CENTER BUILDING

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

17.10.1 Kitchen sink with drain board

510x1040 mm bowl depth 225 mm Each 1 15,029.30 15,029.30

Supply, installation, testing and commissioning of 15mm

C.P. brass single hole sink mixer complete.

Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures

shall be selected by Architect/Interior designer/Project

manager and the same shall be binding for execution.

No additional fixing cost shall be paid for change in type of

sanitary fixtures.

Contractor to receive all the above mentioned items &

store at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 29,613.80 120,211.63

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

SL. DSR Rate DSR Amount NS Amount

DSR DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having

thermal stability for hot & cold water supply including all (CPVC) plain &

brass threaded fittings including fixing the pipe with clamps at 1.00 m

spacing. This including jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of engineer

Internal Work - Exposed on Wall

18.7.5 40 mm nominal outer dia pipes. Metre 40.00 702.95 28,118.00

18.7.6 50 mm nominal outer dia pipes. Metre 60.00 934.15 56,049.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having

thermal stability for hot & cold water supply including all CPVC plain &

brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.

This including jointing of pipes & fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the the same including

testing of joints complete as per direction of engineer in charge.

Concealed work oncluding cutting chases and making good the walls etc.

18.8.2 20 mm nominal outer dia pipes. Metre 40.00 537.60 21,504.00

18.8.3 25 mm nominal dia Pipes Metre 40.00 627.25 25,090.00

18.8.4 32 mm nominal dia Pipes Metre 60.00 739.30 44,358.00

3 18.16 Providing and fixing brass stop cock of approved quality complete.

18.16.1 15 mm nominal bore Each 2.00 353.25 706.50

18.16.2 20 mm nominal bore Each 2.00 379.20 758.40

Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end):

18.17.1 25 mm nominal bore Each 1.00 622.40 622.40

18.17.2 32 mm nominal bore Each 1.00 689.95 689.95

Providing and fixing C.P. bass angle valve for basin mixer and geyser points

of approved quality conforming to I.S:8931 a) 15 mm nominal bore.

18.53.1 15 mm nominal bore Each 2.00 574.30 1,148.60

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts

coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 8.00 121.90 975.20

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

SL. DSR Rate DSR Amount NS Amount

DSR DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 181,046.70

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing cast iron trap of self cleansing design with cast

iron screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S

as per IS 3989.

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal

12.41 ring conforming to IS : 5382, leaving 10 mm gap for thermal

12.41.2 (i) Single socketed pipes. 110 mm diameter Meter 50 377.40 18,870.00

Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes

12.42 conforming to IS : 13592 Type A, including jointing with seal ring 0.00

conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

12.42.3.2 Single tee with door 110x110x110 mm Each 8 234.15 1,873.20

12.42.6.2 Shoe (Plain) 110 mm Shoe Each 8 131.85 1,054.80

Providing and fixing unplasticised -PVC pipe clips of approved design

to unplasticised - PVC rain water pipes by means of 50x50x50 mm

hard wood plugs, screwed with M.S. screws of required length,

including cutting brick work and fixing in cement mortar 1:4 (1

cement : 4 coarse sand) and making good the wall etc. complete.

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 50.00 1,151.90 57,595.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 50.00 1,186.00 59,300.00

Providing and fixing single equal plain junction of reqd. degree with

3 17.43 access door, insertion rubber washer 3mm thick, bolts and nuts

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 925.70 1,851.40

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 665.05 1,330.10

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 811.90 1,623.80

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 561.20 1,122.40

Providing and fixing bend of required degree with access door,

insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 705.20 1,410.40

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 522.80 1,045.60

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 470.45 940.90

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 390.50 781.00

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 513.15 1,026.30

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 362.05 724.10

Providing and fixing MS holder bat clamps of approved design to cast

iron (spun) pipe embedded in and Including cement concrete blocks

8 17.37 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting holes and

making good the walls etc.

Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps.

including cutting and making good the walls etc.

18.10.4 32 mm nominal bore Metre 50.00 667.00 33,350.00

18.10.5 40 mm nominal bore Metre 50.00 811.90 40,595.00

Painting G.I. Pipes and fittings with two coats of anticorrosive

bitumastic paint of approved quality

18.40.4 32 mm nominal bore Metre 50.00 22.20 1,110.00

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

18.40.5 40 mm nominal bore Metre 50.00 25.25 1,262.50

18.40.6 50 mm nominal bore Metre 20.00 30.50 610.00

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste

and vent pipes and fittings with paint of any colour such as

chocolate, grey or buff etc. over a coat of primer (of approval quality)

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 50.00 82.80 4,140.00

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 50.00 62.95 3,147.50

Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3 Nos.

13 NS G.I. Socket 32 & 40 welded G.I. pipe and dipped in hot bitumen

complete in all respect.

100 mm diameter pipe (Hopper ) Each 2.00 1,150.00 0.00 2,300.00

Providing lead caulked joints to sand cast iron/centrifugally

cast(spun) iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement

mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse

AS PER sand: 10 graded stone aggregate 40 mm nominal size) alround CI

19.2 HUBLESS including bed concrete as per standard design

Note: This work shall be done all-round PIPE AT ground floor's toilet.

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty

16 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 1,032.40 2,064.80

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 320,543.40 2,300.00

Digitally signed by AMIT

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

SL. DSR Rate DSR Amount

DSR/ NS DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including Welding,

fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.

1 7.0 and fixing the pipe on the wall/ceiling with suitable

clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as

Supplying, fixing, testing and commissioning of butterfly valve

of PN 1.6 rating with bronze/ gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required :

Providing and fixing ISI Marked of approved make Fire

4 NS Extinguishers complete with all accessories as per

manufacturer's specifications.

4.1 CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 1.00 13,091.00 13,091.00

4.2 Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 1.00 3,153.00 3,153.00

4.3 ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 4.00 2,796.00 11,184.00

Providing, fixing, testing & commissioning of 15mm dia

5 NS quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories :

5.4 21.4 Concealed Sprinkler NOS. 24.00 1,397.00 33,528.00

Digitally signed by AMIT

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

SL. DSR Rate DSR Amount

DSR/ NS DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15 NPT

on reducer thread with maximum working pressure of 175 PSI

6 test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT

male thread to sprinkler head (Outlet) 15mm NPT female

thread with reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Providing and fixing signages printed on photoluminescent

U1000 aluminium sheet of 1.0 mm (+ -10%) containing lumigen

II as base chemical, covered under UV stablized coating and

of appropriate size including fixing on wall, door, ceiling etc.

with proper clamps, hangers, cleats anchor fasteners etc.

complete in all respacts as diercted by Engineer-in-charge

TOTAL CARRIED TO SUMMARY 218,841.00 34,628.00

Digitally signed by AMIT

S.No. Item Item Description Qty. Unit Rate Amount

Supply, Installation, testing and commissioning of Display size: 6 m x 1.7 m or more, Cabinet based LED videowall, Pixel

pitch: 1.56 mm or less, Pixel configuration: Flip chip COB, Pixel density: 409,600 pixels/m² or better, Brightness:

Calibrated 800 cd/m², Peak 1600 cd/m² or better, Contrast ratio: 20,000:1 or better, Color processing: 16-bit or better,

Brightness uniformity: 98 ± 2% or better, Color temperature: 3000–10000 K, Refresh rate: 3840 Hz or better, Viewing

angle: H:170° & V:170° or better, Lifetime: 100,000 hours or better, Power input: AC 100V–240V, Max power

consumption: <350 W/m², Operating temperature: -10° ~ 40°C, Operating humidity: 10%–85% RH, Service access: Front

Active LED and rear, IP grade: IP54 or better, Cabinet: Aluminium die-cast, HDR supported: Yes, Calibration: LED tiles/cabinets

Wall calibrated before supply and again after installation for brightness uniformity, Supplied with video wall controller from

same OEM, LED controller and video processor with USB/RJ45 control ports, Signal input: 6 × DP/DVI/HDMI with 4K

resolution and 6 × PIP/PBP or as per OEM, Signal output: 16 × RJ45 or as per OEM, Loading capacity: 13.10 million pixels

or better, Windows/Layout supported: 4 or more, Audio ports: In & Out, Control ports: LAN, USB, RS232, Remote

control: Yes, Wall mounting arrangement included, Compatible with signage software and future upgradable with

license for uploading content, content scheduling, content publication, monitoring & control, Complete solution (LED

display, control system, signage) from same OEM,

Supply, Installation, testing and commissioning of high performance & Extremely Low Latency 1U Hardware based

Video wall Processor, FPGA based and with Parallel Processing Architecture. System must be capable of processing and

managing multiple unrestricted & uncompressed FHD & 4K60 sources and displays and must be capable of end-to-end

4:4:4 processing, combined with the highest quality conversions between 4:2:0, 4:2:2 and 4:4:4 color spaces. System

must be capable to handle Displays, video wall panels, Active LEDs & Projectors and must have built in feature to do

edge blending of projectors. Must supports minimum 16.5 million pixels design space with standard or custom

resolutions & capable to show upto 250 windows onto a single active LED or Video wall and must support HDR10 and

HLG (Hybrid Log Gamma) to allow freely convert any input to any output and must also support 10-bit processing (30-bit

True Color). System should have minimum 6 HDMI 2.0 HDCP 2.2 inputs each input must support 4k60 4:4:4 resolution.

Device must support both progressive & interlaced scan input resolutions ranging from 480i, 480p to 2160p (4096x2160)

@60 Hz & 1080p upto 120Hz . System should have minimum 2 HDMI 2.0 HDCP 2.2 output each output must support

4k60 4:4:4 resolution. Device must support both progressive & interlaced scan output resolutions ranging from 720p to

2 2160p (3840x2160)@60 Hz & 1080p upto 120Hz. System must have minimum 4 canvas each supporting both symmetric 1 Nos 2,970,000.00 2,970,000.00

& asymmetric kind of Video wall & Active LED. Must have 360-degree rotation option for both Inputs & Outputs in 1-

degree increments. System Must support bezel compensation, Up/down/cross conversion, EDID manager, output

cloning, Transition effects & customisable borders, Video Matrixing, Picture in picture, Multi windowing, windows

stacking, window resizing, keying with HDCP key handling, monitoring output option & BNC ref input and loop,

Framelock to any input video source, synclock using internal clock. The video processors must be able to crop multiple

sections from any source and place them anywhere on the output. The system must support upto 200 labels (source,

text and images) and must be able to dynamically change the label text & images based on the source selection that is

displayed in a locked video window and must be able to add borders to windows of various widths or colors which can

be animated using Presets. Must have built in storage of minimum 3 GB to store images (logos, Background, etc).

System must allow to manage wide active LED having pixel counts of 7480x1080 pixels, 1080x7480 pixels and any

random pixel counts within limit to 4K pixel count with a single 4K60 basic Active LED controller. The video processor

must be able to crop multiple sections from outputs for independent placement on the canvas. System must allow to

Digitally signed by AMIT

S.No. Item Item Description Qty. Unit Rate Amount

Supply, Installation, testing and commissioning ofAI based supporting 4K 60 Dual output Tracking PTZ Camera with AI-

powered motion tracking, Sensor 1/2.8" 8.6M, minimum 30X Optical Zoom and 8x Digital Zoom with Panning range of

+170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 85°. preset

support: 250 or more, Dual IP stream support, IP Compression-H.265 and IP Protocol: RTSP, RTMP,RTMPS,SRT etc.

Camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio In and can be

controlled via RS232/IP. Should support multiple video streams. Video S/N Ratio > 50dB. Tracking Camera should

support Everywhere Tracking, Partition Tracking, Auto Framing. Should support PoE+ and Virtual USB Driver. OEM

should be CE, FCC, RoHS & BIS Cer fied

Supply, installation, testing & commissioning of POE based AV over IP and NDI HX3 4K Bridge with USB Extension over

IP, Instant source switching, IP Video to USB Conversion, USB Host x1 , Type-C x1 and HDMI x 1 outputs, Audio Input Line

4 In/MIC In ,3.5mm x1, Audio Output, UVC support, PIP / PBP, Video Wall: 3x3 or more support, Audio Decoding & Audio 1 Nos 162,000.00 162,000.00

SITC of Joystick with 3" LCD for Preview Monitoring, PAN/Tilt/Zoom Control, Communication via IP & RS232C/RS455

Interfaces, Auto Backlit Keys, Should be able to control minimum 200 Cameras on IP & 10 Cameras through RS232/422,

Should support VISCA, VISCA Over IP protocols & PoE. OEM should be CE,RoHS & FCC Certified

4 Channel- SITC of Recording, Streaming & Webcasting Hardware simultaneously, Built-in 4x HDMI & IP Inputs with 4x Line Inputs,

Recording 2x HDMI Outputs. The system should be capable to record upto any four inputs simultaneously in a single frame and as

6 and well as individual sources simultaneously. Should have minimum 1TB inbuilt storage and can be connected to local NAS 1 Nos 549,000.00 549,000.00

Streaming storage. The system should be able to support minimum 3 unicast streams.The recorded files should have the option of

Hardware me and date stamp. OEM should be CE, FCC & RoHS Cer fied.

Supply, Installation, Testing & Commissioning of AVoIP Encoder supports 4K UHD over Gigabit Ethernet; Inputs min 2x

HDMI 2.0 4K60 4:4:4 & 1x USB-C capable of scaling and outputting video with auto-switching between all the 3 input

sources; HDCP 2.3; HDMI Loop Out up to 4K60 4:4:4; USB Host port; LPCM audio support upto 8 Channels from HDMI

Input; Embedded audio input; Native AES67 Network Audio; Adjustable Video Bitrate upto 800 Mbps with bit-rate

compression CODEC w/ built-in AI; Video Codec: JPEG2000 based visually lossless video compression algorithm; latency:

5 ms at 4K60 4:4:4; AES-256 Encryption or better; 2 or more LAN ports with POE power sharring;; VLAN tagging to

7 saperate Video traffic from data & voice and VLAN Trunk mode capability; RTP audio stream capability; ICMP,IGMP & 4 Nos 180,090.00 720,360.00

PIM feture support; Supports Video, Audio, USB, KVM & RS232 independent matrix routing; EDID managment; USB over

IP (KVM), RS-232 over IP, IR over IP, GPIO over IP; Standard PoE Power 15 W or lower; Integrated Software management

platform supports for system monitoring & control; Future upgradable DANTE; support 802.1x, HTTPS, SSH security

encription; Compliance supports TAA, CE, FCC, C-tick, RoHS, WEEE.

Digitally signed by AMIT

S.No. Item Item Description Qty. Unit Rate Amount

Supply, Installation, Testing & Commissioning of AVoIP Decoder supports 4K UHD over Gigabit Ethernet; Outputs min

1x HDMI 2.0 4K60 4:4:4 & 1x USB-C capable of scaling and outputting video with auto-switching; HDCP 2.3; min 2x USB

peripheral ports; LPCM audio support upto 8 Channels from HDMI Input; De-embedded audio output; Native AES67

Network Audio & Dolby enabled; Adjustable Video Bitrate upto 800 Mbps with bit-rate compression CODEC w/ built-in

AI ; Video Codec: JPEG2000 based visually lossless video compression algorithm; latency: 5 ms at 4K30 & 4K 60 4:4:4; 2

or more LAN ports with POE power sharring; VLAN tagging to saperate Video traffic from data & voice and VLAN Trunk

AV Over IP mode capability; RTP audio stream capability; Built-in 16x16 videowall function with rotation support upto 270 degree;

Decoder Text overlay capability; ICMP,IGMP & PIM feture support; Auto Video Scaler 4K in/1080P out & 1080P in/4K out;

Supports Video, Audio, USB, KVM & RS232 independent matrix routing ; USB over IP (KVM), RS-232 over IP, IR over IP,

GPIO over IP and CEC over IP; Standard PoE Power 15 W or lower; Integrated Software management platform supports

for system monitoring & control; Future upgradable DANTE; support 802.1x, HTTPS, SSH security encription; Compliance

supports TAA, CE, FCC, C-tick, RoHS, WEEE.

Supply, Installation, Testing & Commissioning of 40-45 cm long cardoid/Supercardoid Gooseneck microphone along with

5 PIN table stand with on/off switch and green integrated light ring: Frequency response : 50 Hz to 20 kHz; Nominal

impedance : < 100Ω; Max SPL : 130dB; Phantom power : +12V to +48V; Pattern : Cardioid; Microphone Type : Pre-

9 polarized condenser. Pre-polarised condenser and RF shielding against intermodulation from wireless devices, 4 Nos 51,778.80 207,115.20

impedance less then 100 ohm. TTL logic output for look at me or media control.

Supplying, Installation, testing and commissioning of Digital Wireless Handheld with Condenser Transducer type; Polar

pattern: Supercardioid; RF frequency ranges: 1,880 to 1,900 MHz or better ; Audio Frequency response: 20 Hz-20 kHz or

Wireless better ; Signal to noise ratio: > 90 dB(A) or better; Dynamic range: > 120 dB(A)or better, Audio Sampling: 24 bit/48 kHz

10 Handheld or better; THD: 0.1% or better ; Latency: 19 ms or better; RF output power: up to 250 mW or better; Should have 4 Nos 78,857.10 315,428.40

microphone Automatic frequency and interference management; Should have Secure 256 bit AES encryption; with Advanced power

management and Li-Ion rechargeables Battery; 15 hours Battery operting time .

Supply, Installation, Testing & Commissioning of network enabled charger with four individual charging bays for SL

Bodypack DW or SL Handheld DW. Each bay shall include four LEDs to indicate battery status. The charger shall support

IPv4 and IPv6 network compatibility and allow monitoring and remote control.

Supply, Installation, Testing & Commissioning of Digital wireless 4- channel Receiver with AF frequency response : 20 to

20,000 Hz or better; Dynamic range : > 120 dB(A) or better; RF frequency ranges: 1,880 - 1,900 MHz ; Latency: 19 ms or

Wireless better; THD : 0.1 % or better; Audio sampling : 24 bit/48 kHz or better; Signal-to-noise ratio > 90 dB(A) or better; Should

12 system have AES 256 Encryption ; Should have 2x Dante interface & PoE ; RF sensitivity : < -90 dBm or better; RF output power : 1 Nos 192,564.00 192,564.00

Receiver up to 250 mW or better; Should have IPv4 /IPv6 Network Protocol; Should have PoE IEEE 802.3af Class 3 Power Supply;

Should have Support Full control & configuration.

Digitally signed by AMIT

S.No. Item Item Description Qty. Unit Rate Amount

Supply, Installation, testing and commissioning of 12x8 Digital signal Processor models with 12 mic/line inputs and 8 line

outputs; 12 channels of AEC and 24x48/48x24 dante enabled; AUDIO SYSTEM should include a configurable USB Audio

interface- /output configuration of the USB Audio Interface can be set to 0x8, 2x6, 4x4, 6x2, or 8x0 ; should be certified

for microsoft Teams and Zoom; 64 bit floating point audio DSP processing; Equipped with selectable 48 volt phantom

power for the iminimum 8 nos. analog inputs; Should have 24 bit/48 kHz analog to digital and digital to analog

converters; 8 or more DSP Configurator presets; Audio system gain: Balanced output: 0 dB, unbalanced output: -6 dB or

better; Frequency response: 20 Hz to 20 kHz, ±0.2 dB or better; THD + Noise <0.02%, S/N: Analog In to Analog Out >109

dB, Analog In to Digital Out 110 dB, Digital In to Analog Out 115 dB, Crosstalk should be <-90 dB, impedance >10k

ohms; Up to eight audio file players can be used to play back audio files; Certification: UL, CE, FCC Class A, ICES, RoHS,

Supplying, Installation, testing and commissioning of Multi Channel Class D amplifier providing total rated output power

600 W or better; Minimum 4 Channel Input and Output, Power sharing on all outputs; Maximum output power single

channel (power sharing): 500 watts or more; Impedance support: 4 ohm, 8 ohm, 70 V, 100V; Nominal Gain 36.2 dB or

14 better , Signal to Noise Ratio > 103 dB or better, Damping factor : > 1000 or better; THD+N < 0.1 % or better, 2 x 6-pin 1 Nos 129,150.00 129,150.00

Euroblock, 1x RJ45, Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush

current limiters, mains over/under voltage protection.

Supply , installation , testing and commissioning of Two-way, full-range 5.25" Weatherize surface mount speakers with

Frequency response (-10 dB): 55 Hz - 20 kHz; Power handling: 75 W (300 W Peak); Transducer:5.25"LF, 0.75"HF;

Sensitivity: 89 dB; Max SPL: 108 dB (114 dB Peak);Nominal impedance: 8 Ω;Transformer taps: 70V: 60 W, 30 W, 15 W, 8

W, 8 Ω;100V: 60 W, 30 W, 16 W, 8 Ω ;Coverage angle: Horizontal 90°, Vertical 90°; Environmental:IP-65 (per IEC-

60529);certification EN 54-24 and UL1480. including mounting bracket.

Supply, Installation, Testing & Commissioning of Av control processor 1 x RS-232/ RS-422/RS-485 ; 1 x bidirectional RS-

232; 4 x Digital I/O; 1 x IR/Serial; 2 x relays ; 1 GB SDRAM & 8 GB Flash Memory; Data rate: 10/100/1000Base-T,

16 half/full duplex with autodetect; support protocols : ARP, DHCP, DNS, HTTP, HTTPS (redirect), ICMP, IEEE 802.1X, NTP, 1 Nos 162,751.50 162,751.50

SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP; Supports control system synchronization; Supports 802.1X Authentication;

Front panel port status indicators; Should have Regulatory compliance: CE, UL, FCC, RoHS, WEEE or any equivalent.

Supply , Installation, Testing & Commissioning of 10" Tabletop capacitive touchscreen with 1280x800 resolution and 24-

bit color depth or better, Pixel density 149 PPI; Aspect ratio - 16:10; Brightness- 420 nits; Contrast - 800:1; Viewing

angle ±85° horizontal, ±85° vertical; SDRAM- 2GB & Flash memory- 8 GB or more; Motion & Lighting sensor- On/off OR

Auto/manual; Connectors — 1 x RJ-45; Data rate: 10/100/1000Base-T, half/full duplex with autodetect ; Protocol DHCP,

17 DNS, HTTP, HTTPS, ICMP, IEEE 802.1x, SFTP, SSH, TCP/IP, UDP/IP; Faster quad-core processing and eight times more 1 Nos 408,142.80 408,142.80

memory, toughend Gorilla Glass screen, scratch, and smudge- resistant, Power over Ethernet provides power

and communication over a single Ethernet cable, built-in speaker with Frequency response : 1000 Hz to 20 kHz or

better, USB port .

Digitally signed by AMIT

S.No. Item Item Description Qty. Unit Rate Amount

Supply, installation, testing and commissioning of Pressbox set for 6 nos. press users, having 12/6/3G-SDI/HD-SDI,

Audio, HDMI interfaces set with 6-9U portable rack for Press. Including Four Output 12G-SDI supporable with SDI, HD-

SDI, 3G-SDI, 6G-SDI, and 12G-SDI digital video signals wtih datarate of 11.88 Gbps. including HDMI to 12G-SDI Scaler

with Stereo Audio which should have Two simultaneous 12G-SDI/ 6G-SDI/ 3G-SDI/ HD-SDI outputs. Including HDMI

18 PressBox set Distribution Amplifiers with Six Output 4K/60 4:4:4 HDMI 2.0, 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless 4 Nos 670,500.00 2,682,000.00

audio formats, and CEC control, HDCP 2.3 compliant, EDID manager; Selectable output muting via RS-232/IP control.

Including Six Output Stereo Audio Distribution Amplifier along with same make of Universal Rack Shelf Kit for 6" Deep

Products. all the interfaces hardware should be from single make for avoid any incompetency. Including customized 6-8

XLR panel enclosure.

Supply, Installation, Testing and Commissioning of 24x1G PoE+ 300W power budget or more, 2x1G and 4xSFP fully

Managed AV over IP network Switch, support for dante, av over IP, AES67, and AVB profiles. 64 Gbps Switching, 16 Mb

19 Packet Buffer, latency <2.15.µs 1G, 512 IPv4 & 128 IPv6 IP Multicast Routing Entries, 4K VLANs, 60 Gbps non-blocking 1 Nos 164,000.00 164,000.00

fabric across 30 ports, USB-C and RJ45 RS232 console ports and USB-A storage port, Auto-Trunk, Auto-LAG and IGMP

Plus, IGMPv3 MLDv2 Snooping, Proxy ASM & SSM.

Supply, installation, testing & commissioning of 4 pair unshielded TIA/EIA-568-C Category 5e cable with 24AWG or

better Solid annealed bare copper conductors, High-density polyethylene insulation.

Hdmi Cable 2 "Supply, Installation. testing and Commissioning of 30 AWG 18Gbps 2 meter High-Speed HDMI Active Copper Cable with

Mtr Gold-Plated connectors; video capability- HDMI 2.0 4K@60Hz 4:4:4 Chroma

Supply, Installation, Testing & Commissioning of 48/.2 1.5 sqmm Twisted Pair Speaker cable with soft rubber-pvc

22 Speaker Cable 100 Mtr. 110.70 11,070.00

Supply, Installation, Testing & Commissioning of 16 U Equipment Rack for housing all rack mountable equipments with

internal wiring, front glass door; heat dessipation fans; movement wheels, power distribution units etc., size: 600 x 800

mm; complete with standard accessories.

Cable & Supply, laying and termination of required USB cable and Connectors.

Supply, Installation, Testing & Commissioning of Digital Interactive Podium in Metallic Frame and Wooden Top with 21-

24 inch Full HD Interactive Display, with Motorized Tilting of the Interactive Panel, with provision to install Gooseneck

Microphone with mute / unmute button, Interactive panel, Keyboard Tray and space to store AV equipment, Interactive

display with full HD resolution of 1920x1080, Technology IPS LCD, Aspect ratio16:9, Brightness 250 cd/m2, Contrast ratio

800:1. Top connectivity plate with HDMI, USB x 2 and Power socket for external Laptop connectivity. and output and

power socket, laptop tray, side visualiser tray and built in power distribution kit along with desktop PC with i5/i7

processor, 8GB RAM and 256 GB SSD, complete with standard accessories as required.

Total Amount GST 19,984,033.90

Total Amount GST 19,984,033.90

Digitally signed by AMIT