Construction of Commercial/ Administrative Building for Baroda Rajasthan Kshetriya Gramin Bank at Prithviraj Nagar, Ajmer (Rajasthan)

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

Total of (BoQ 3, BoQ 4, BoQ 5, BoQ 6 )

Total Amount of BoQ3 (Civil Schedule Items Percentage Rate)

Total Amount of BoQ4 ( Civil Market Item Rate)

Total Amount of BoQ5 (Electrical Schedule Items Percentage Rate)

Total Amount of BoQ6 (Electrical Market Item Rate)

Bidder Name

Amount

RISHABH CONSTRUCTIONS PVT. LTD. (GSTN-08AABCR0445E1ZR) BID ID -715685

JCC INFRAPROJECTS PVT LTD (GSTN-08AADCJ2597D1ZI) BID ID -715755

LNA Infrarprojects Pvt Ltd (GSTN-08AADCL1585B1ZQ) BID ID -717197

Description of Work / Item(s)

Amount

NON SCHEDULE ITEMS/(MARKET RATE ITEMS) CIVIL

NS-1 - Providing and fixing hexagonal chicken mesh having opening 20mmx20mm of 26 gauge at juncitons of concrete & brick work or between different material etc. as directed.

NS-2 - Filling of sunk portion of roof with foam concete of required height including filling complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification.

NS 3- Providing and fixing wash basin under counter with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls. complete job as per specification and directed by engineer incharge complete job as per specification and directed by engineer incharge.

NS 4- Providing and fixing unplasticised SWR PVC pipes confirming to IS:13592 Type B including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion.(I)single socketed pipes 110 mm dia.

NS 5 - Providing and fixing unplasticised uPVC SWR moulded fitting accessories for unplasticised Rigid PVC pipes confirming to IS-13592 type B including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Coupler (socket)110 mm dia

NS 6 - Providing and fixing unplasticised uPVC SWR moulded fitting accessories for unplasticised Rigid PVC pipes confirming to IS-13592 type B including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. DoubleY 110 mm dia

NS 7 -Providing and fixing unplasticised uPVC SWR moulded fitting accessories for unplasticised Rigid PVC pipes confirming to IS-13592 type B including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Single door Y 110 mm dia

NS 8 - Providing and fixing unplasticised uPVC SWR moulded fitting accessories for unplasticised Rigid PVC pipes confirming to IS-13592 type B including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Plain Bend 110 mm

NS 9- Providing and fixing unplasticised uPVC SWR moulded fitting accessories for unplasticised Rigid PVC pipes confirming to IS-13592 type B including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Door Bend 110mm dia

NS 10 - P&F rigid uPVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Vent Cowel 110mm dia

NS 11- Providing and fixing SFMC or It,s equivalent make unplasticised uPVC SWR mmoulded fitting accessories for unplasticised Rigid PVC pipes confirming to IS-13592 type B including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. Plain floor trap 110mm dia

NS 12 - Providing and fixing uPVC SWR moulded fitting accessories for unplasticised Rigid PVC pipes confirming to IS-13592 type B including jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion. UPVC Multi floor trap 110mm dia

NS 13 - Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. PVC pipe clips 110mm dia

NS 14 - Providing and fixing Drop Down Support Grab Bar - (As per Technical Specification) . complete job as per specification and directed by engineer incharge.

NS 15 - Providing and fixing Wall Mounted Horizontal Grab Bar (As per Technical Specification) or It,s equivalent Makes.complete job as per specification and directed by engineer incharge.

NS 16- Providing and fixing Wall Mounted Vertical Grab Bar (As per Technical Specification) or It,s equivalent make. complete job as per specification and directed by engineer incharge.

NS 17- Providng and fixing glass louvers in windows & ventilator in toilets and similar locations with aluminium louvers frame of appropriate size (cost of aluminium frame to be paid in basic item) with 5.0mm thick clear float glass of approved manufacturer including cost of all fittings, labour, tools, lead & lifts etc complete work as per instructions of engineer in charge

NS 18 - Providing and fixing Glass reinforced concrete( GRC) Jaali in approved shade size pattern , design, thickness and color by spraying method using specialized equipments( power spray machines to attain the optimum strength) allowing simultaneous deposition of known quantities of cementitious slurry and chopped glass fiber. The screens should be made from “ 53 grade white Portland cement quartz, fine silica sand , alkali resistant glass fiber manufactured by Saint Gobain or equivalent, super plasticizers manufactured by, polymers manufactured by and UV Resistant synthetic inorganic pigments manufactured by or equivalent. The material casting should take place in synthetic rubber/ FRP Mould manufactured by. The fixing should be dry type ie to be done with SS-304 Grade L shaped clamps, dash fasterners, and pins/ anchors as per the direction of the architect/ engineer in charge. The work to be carried out at all heights depths.” The casted screen moulds must be stored under controlled temperatures ranging in between 5 degree Celsius – 45 degree Celsius.

NS 19 - Supply and fixing of automatic sliding door system for 4150mm track length. Including glass to glass back mounted plate and manets. Glass will be of 10mm/12mm as per requirement or panel size. Included fixing, cartage and all necessary hardware as below specifications:-

NS 20 - Finishing of existing Granite stone of approved shade with leather for flooring and cladding work. The cost of providing and fixing of granite is to be paid in corresponding item, in this item only difference of cost of leather finish is to be paid including cost of all plant, machinary, tools, labour, etc, complete work as per the instructions of Engineer in charge.

NS 21 - 1. Boom barrier Length : Upto 6.00 Meter (the exact length should be checked during site Familiarization) 2. Boom : Should be made of white painted aluminum alloy finished with powder coating with bright reflective tape strips in order to be visible even at night having hexagonal section made from adequate thick sheet. Additional tube link LED to be provided. 3. Height of Boom from ground:700-1000 millimetre 4. Opening and closing Time : 02 to 6 Second Maximum 5. Housing : The control unit is to be housed in a stainless steel, weather proof housing with IP 54/IP 55 Enclosure. 6. Operating Voltage : 230 ± 10% Volt, AC 50 Hz. 7. Control Unit : Micro Controller 8. Duty Cycle : Intensive Use. 9. Operation : Stand alone with push button switch, access card & remote control. 10. Safety : Vehicle Loop Detector/Optical beam sensor/photo cell be provided to prevent barriers from closing on the vehicles (vehicle safety)

NS 22 - Providing and fixing stainless steel grade 316 door handle of approved quality with necessary screws etc all

191 mm Long

300 mm Long

NS 23 - Providing and fixing SS Sliding door bolts with necessary screws etc. complete:-

NS 24 - Providing and fixing S.S. tower bolts with necessary screws etc. complete :

Tower Bolt 250X 10mm

Tower Bolt 150X 10mm

NS 25 - Providing and fixing Single Lever Extended Basin Mixer 85mm height, (As per Technical Specification)

NS 26 - Providing and fixing Waste Coupling Chrome 32mm Size Full thread with 130mm height, (As per Technical Specification)

NS 27 - Providing and fixing Automatic Soap Dispensers Capacity 0.8L, Aluminium Material Finish Chrome/Black, (As per Technical Specification)

NS 28 - Providing and fixing Toilet Roll Holder Chrome finish with flap, (As per Technical Specification)

NS 29 - Providing and fixing Towel Holder Twin type Stainless Steel, (As per Technical Specification)

NS 30 - Providing and fixing Single Lever Sink Mixer with Swinging Spout on upper side (Wall mounted Model) with conncecting Legs & Wall flanges, (As per Technical Specification)

NS 31 - Providing and fixing Wall mixer with provision for overhead shower with 115mm long band pipe on upper side, Connecting legs & Wall flanges (As per Technical Specification)

NS 32 - Providing and fixing exterior grade Vitrified tiles conforming to relevant IS codes (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

NS 33 -Providing of Artificial Grass of 25mm thick make: Artificial Grass 25mm thick, All yarns should be heavy metal free and UV stabilised, Yarn type : Texturised monofilament, material:100% Polyethylene, Standard Dtex:7200, Colours Field Green/ Lime Green, A concentrared latex compound optimised for turf lock. Product specification Pile weight: 1021 gm/sqm. Tufted Pile Height 25mm, Roll width 4m, Total product weight 2073 gm/sqm. (As per Technical Specification)

NS 34 - Providing and fixing Brass Regular 22mm water Tap aerator Foam Flow, Male outer thread (As per Technical Specification)

NS 35 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge. (As per Technical Specification)

NS 36 - Providing parking Systems of Lift type Parklift PL 411/5 PlBr.2200 2.0T Comfort Powder Coated Platform Width- 2200mm Platform Length- 3750mm Car Weight- 2000mm Clear Height- 3700mm System Coating- Powder coating (As per Technical Specification)

BOREWELL

NS 1 - Supplying & Installation of required capacity of Three phase, 50 Hz,415V, deep well submersible pump Steel body, as per IS of approved Make, suitable for 6" tube well with Control Panel Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap, Stainless steel wire rope etc. as required as per specifications all inclusive but excluding Pipe and connection cable.

7.5 H.P. with 13 to 14 stages, Head Mt 129-52, Discharge LPM 60-270

NS 2 - Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.

6.0 Sq.mm multi strand

NS 3 - Supplying and laying of approved Make HDPE pipe as per IS : 4984 and IS : 14333 with latest amendment for installation of submersible pump with necessary connection, socket/couplings, Tees,etc. as required (PE-63 & working Pressure 10 kgf/sq cm)

50 mm Outer Dia.

NS 4 - Supply, Installing, Testing and functioning of start electrical panel (outdoor type) and water proof electrical cable for Submersible pump iincluding the cost of all lead & lifts, tools, plants, machinary, connections, specials etc complete job as directed by Engineer in charge

NS 5 - Supplying & Installation of required capacity of Three phase, 50 Hz,415V, mono block water transfer pump Steel body, as per IS of approved Make, connections, including clamps, etc. as required as per specifications all inclusive but excluding the cost of pipe and connection cable.

3.0 H.P. Discharge LPM 60-180, Head upto 45Mtr

SEWERAGE TREATMENT PLANT

A. SEWAGE TREATMENT PLANT

Design, Supplying, Installing, Testing & Commissioning of sewage treatment plant based on MBBR process with sewage handling capacity of 15KLD. The entire plant will be constructed in RCC below the ground. The Plant shall be completed with a central Electrical Power and Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, level and other controls.

Nature of Waste - Toilet waste from Premises

Anticipated effluent parameters before treatment:

BOD 250-400 mg/lt

SS 200-450 mg/lt.

COD 600-800 mg/lt.

Oil & Grease upto 50 mg/lt

Desired Sewage discharge standard after treatment:

BOD5 Less than 20 Mg/L

S. Solids Less than 10 Mg/L

COD Less than 150 Mg/L

Oil & Grease Less than 5 Mg/L

1 - Providing and fixing manually cleaned Bar Screens, to remove coarse and fine material in the waste water made up of SS 304 Perforated, Coarse Type Bar Screen complete as required including handle for lifting. Civil construction of bar screen chamber by cilvil contractor as per design submitted by STP vendor.

1.1 - Coarse Screen (for 0.6 m/s inlet velocity and 0.9 m/s outlet velocity, with 12mm c/c spacing of bars.

2 - Supply, installation, testing & commissioning of level controllers for automatic operation of the complete system with high/low level alarm complete with auxillary NO/NC contacts. (Required in equalization tank, chlorine contact tank, treated water tank ).

3 - Providing, fixing, testing & commissioning of fully submersible, sewage transfer pump for raw sewage transfer from equalization tank to Anoxic/MBBR tanks. The pump shall have CI casing & impeller, SS shaft, TEFC induction motor including pressure gauge, lifting arrangement for the pump, all necessary piping (flexible pipe with coupling), delivery header valves, tube type level indicator, level controller with wiring to control the level of sump automatically. etc. Receiving tanks shall be completed with inlet, outlet, drain arrangement (Pipe + Valve).

3.1 - Submersible Sewage Transfer Pumps

(2 Nos. - 1 W +1 S)

Flow Rate (each) = 1.0 m3 / hr

Head = 8 Mtr

4 - Providing, fixing, testing & commissioning of horizontal, centrifugal Sludge recirculation pumps. The pumps shall have CI casing, CI/CS Impeller & SS shaft & sleeve with mechanical rotary shaft seal connected by a flexible tier type coupling to TEFC induction motor mounted on a common channel base-plate with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads of approved design. Motor to be suitable for including all necessary piping, valves and other accessories and concrete foundation complete as required.

4.1 - Sewage transfer Pump

Capacity : 1 Cum/hr.

Head :10-12 mtrs.

4.2 - Sludge Recirculation Pump

Capacity : 1 Cum/hr.

Head :10-12 mtrs.

5 - Air diffusion system shall include the following:

5.1 - Supply, installation, testing & commissioning of twin lobe, rotary Air blower capable of delivering 40 cum/hr of free air at required pressure driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.

Air Blowers

Flow Rate (each) =40m3 / hr @ 4000mmwg

5.2 - Air piping shall comprise of MS (Epoxi Paint) in Areation Tank & Plant room complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, paint, supports & clamps, puddle flanges etc cutting chases & making good the wall wherever required. Contactor to submit detailed P & I indicating their proposal.

MS Epoxy : Air piping( non-submerged)

Flexible Braided : Submerged Air Piping

6 - Coarse and Fine bubble air diffuser of tube type with silicon membrane and disc type course bubble diffuser for equilization tank and sludge holding tank.

Air dispersion system shall be provided for MBBR Tank, Equalization Tank and Sludge Holding Tank.

7 - Providing and fixing all interconnecting piping (as described below) and isolation control valves for making the system complete. The piping material shall be MS 'C' class.

MS Epoxy : Air piping & pumped effluent riser ( non-submerged)

PVC piping (10 kg/sqcm) : Pumped effluent (submerged)

Flexible Braided Pipe : Submerged Air Piping

PVC Piping (10 kg/sqcm) : Interconnecting pipe line after delivery header of pump / filter

8 - Supply, installation, testing and commissioning of MBBR media. The media shall be enough for proper functioning of STP. [MBBR System to be in two reactors]

9 - Supply, installation, testing and commissioning of PVC tube deck settling media to be installed in Tube Settler Tank

10 - Supplying, installing, testing and commissioning of dosing system consisting of one HDPE tank of 100 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-5 lph. The motor shall be suitable for operation at 240 V/single phase/50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. The pump shall be speed & stroke control.

11 - Providing, fixing, testing & commissioning of Horizontal centrifugal Filter feed pumps for filtration. The pumps shall be made of CI casing, CI/CS Impellar, SS shaft & sleeve, Mechanical Seal are connected to a TEFC induction motor mounted on a common channel base frame with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads of approved design. Motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary piping, valves and other accessories complete as required.

Capacity 2 M3/Hr.@ 25M head (2 Nos. 1W+1S)

12 - Supply of vertical self supporting Presure sand filter, in FRP/MSEP construction, pressure gauges at inlet & outlet, with Multiport Valves for various operation and all accessories, with initial charge of filter media for multi-grade filter, complete.

Presure Sand Filter :

Capacity/Flow Rate - 2 M3/Hr

Filtration rate - approx.(12 m3/hr/m2)

Filter Dimensions - 500 mm X 1550 mm

Working pressure - 3.5 Kg/Sq.cm

Test pressure - 10.0 Kg/Sq.cm

Valve Operation- manual

13 - Supply of vertical self supporting Activated carbon filter, in FRP construction, pressure gauges at inlet & outlet, with Multiport Valves for various operation and all accessories, with initial charge of coconut shell activated carbon having iodine value of 900

Activated Carbon Filter :

Capacity/Flow Rate - 2 M3/Hr

Filtration rate - approx.(12 m3/hr/m2)

Filter Dimensions - 500 mm X 1550 mm

Working pressure - 3.5 Kg/Sq.cm

Test pressure - 10.0 Kg/Sq.cm

Valve Operation- manual

14 - Supply, installation, testing and commissioning of Filter Press with sludge collection Tray of Suitable Capacity with CI frame, PP plates complete with filter cloth complete with interconnecting piping and poly dosing system.(Capacity 0-6 LPH and size of filter press = 18" X 18" X 18 No of plates)- ( common for STP and ETP)

15 - Supply, installation, testing & commissioning of positive displacement type screw slurry pump with MS casing, SS-strator with internal rubber lining, gland packing seal, solid handling capacity upto 7 to 10% of the effective percentage of sludge and direct drive with motor..

Sludge Feed Pump ( Common for STP and ETP)

Capacity : 1 m3/hr

Head : 32 mtrs. (1W)

16 - Insrtumentation-

Supply and fixing of following instrument

16.1 - Providing and fixing full bore type Electro-magnetic flow meter designed at maximum speed of 3-4 m/sec at the sewage inlet and outlet

16.2 - Providing and fixing of suitable size pressure gauge boudron type glycerin filled

B. ELECTRICAL INSTALLATION

1 - Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coate of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system.

Motor Control Centre

Incoming

100 amps TPN MCCB with the following accessories:

c) Phase indicating lamps shall be protected by 2 amp SP MCB 3 sets.

Bus Bar

150A TPN aluminium , colour coded bus bars suitable for 415V, 50Hz. (after deration)

Outgoing

b) Spare MCB's of following capacities

I. 20 amps TPN MCB's 3 Nos.

a) All MCCB's / MCB's shall be of 15 KA breaking capacity and suitable for motor duty application.

b) All motor starters shall be provided with Auotmatic level controller.

c) DOL starters shall be used for moters below 10 HP and Star-Delta Starters for other motors.

d) Provision shall be made for providing potential free contacts to all pumps starters. The panel should have sufficient no. of potential free contacts for monitoring purposes.

Provision for dry run protection shall be made in the panel.

2 - Supplying, installing, testing & commissioning of Cables , Connector, Cable Trays, earthing etc to make Electrical Installation Complete.

C. DOCUMENTATION

Documenation and getting NOC from appropriate authorities for operation

WATER TREATMENT PLANT

1 - Horizontal monoblock centrifugal transfer pumping set with CI body and bronze impeller, SS shaft mechanical seal, connected to a TEFC induction motor suitable for 415 volts ± 3% phase 50 cycles AC supply with a common suction header with valves on main connecting & pumps inlet and a common delivery header with valves including Starter panel for pump operation

1.1 - Filter feed pump

(1 working + 1 stand by)

Capacity - 4M3/hr

Head - 30 m

2 - Dual Media Filter

Supply Installation,Testing & Commissioning of vertical self supporting Filter constructed of FRP complete with frontal piping and Multiport valve. The filtration media shall have multiple layers of different grades of pebbles, gravels and sand

Capacity - 4M3/hr

Filtration rate - 18000 lph/m2

Filter dia approx. 525 mm

Filter HOS - 1550mm

Working pressure: 4.5 kg/cm2

Test pressure : 7.0 kg/cm2

3 - Activated Carbon Filter

Supply Installation,Testing & Commissioning of vertical self supporting Filter constructed of FRP complete with frontal piping and Multiport valve. The filtration media shall have multiple layers of different grades of pebbles, gravels and activated carbon

Capacity - 4M3/hr

Filtration rate - 15000 lph/m2

Filter dia approx. 600 mm

Filter HOS - 1800mm

Working pressure: 4.5 kg/cm2

Test pressure : 7.0 kg/cm2

4 - Water Softener

Supply Installation,Testing & Commissioning of vertical self supporting Filter constructed of FRP complete with frontal piping and Multiport valve. The softening media shall be Na+ cation resins

Capacity - 4M3/hr

Design Hardness - 450ppm as CaCO3

Desired treated water hardness - < 50ppm as CaCO3

Resin Quantity- 350 Ltrs

Brine Tank capacity - 500 Ltrs

Chlorinationation System

Providing and fixing chemical dosing pump capacity 0-6 lph mounted including 100 lit capacity uPVC container with lid, injection fitting assembly, suction and delivery hose upto the point of injection including supports complete in all respects .

Interconnecting piping in uPVC with associated valves

Documenation and getting NOC from appropriate authorities for operation

Bidder Name

Amount

RISHABH CONSTRUCTIONS PVT. LTD. (GSTN-08AABCR0445E1ZR) BID ID -715685

JCC INFRAPROJECTS PVT LTD (GSTN-08AADCJ2597D1ZI) BID ID -715755

LNA Infrarprojects Pvt Ltd (GSTN-08AADCL1585B1ZQ) BID ID -717197

Description of Work / Item(s)

Amount

PASSENGER LIFT

NS - 1 Supply, Installation, Testing & Commissioning of Lifts (Elevators) as per following specification including cost for one year AMC and getting Certificate from lift inspector as per standard guidelines complete work Capacity - 8 Persons (544 Kg) Speed - 1 M/s No of Stops - B+G+4 Travel Distance - Approx. 21 Mtr Drive - Micro Processor based VVVF Make : As per Technical Specifications Type of lift - MRL or MR

DG SET

NS - 2 Supply, Fixing, testing and Commissioning of 5 Star rating following KVA Rating Silent type Diesel Generating Set at 0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, with Control panel, 0.85 load factor including sound proof acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, residential type silencer (as per CPCB-IV norms) fabricated out of CRCA sheet of 14 / 16 SWG thickness with min. 9 tank pretreated before powder coating with ventillation system anti vibration pads complete in all respects comprising of the following. Should be synchronize compatable (Testing of DG sets should be done as per specified in Technical specification). (All approvals and installation clearnces from the Local authority to be taken by the contractor only and fees will be paid by the client)

The canopy should be designed in such a way that the Noise level is not nore than 75 DB level at a distance of 1 meter away from the DG set as per Indian standards.

Diesel Engine -

Diesel Engine suitable for driving alternator of above rating, compression ignition, 4 stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable for above output of alternator at 40oC, 50% RH & at 1000 M MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after 12 hrs of continuous loading, complete with all the accessories i.e. tachometer with hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting rods, electronic governing system, dynamically balanced flywheel, air intake manifold, Air cleaner, anti vibration pads, starter motor, including all other accessories required to complete the system.

Instrument Panel - Engine mounted Instrument Panel fitted with and having digital display for followings :

Start stop switch with key

Water temperature indication

Lubrication oil pressure indication.

Lubrication oil temperature indication.

Battery charging indication

RPM indication

Over speed indication

Low Lube oil trip indication

Engine hours indication

The DG set should be supplied with cable end box to terminate suitable size of cables on alternator complete as required.

Alternator -

Synchronous Alternator of above capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles, 4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 1000 meter above MSL, capable of taking 10% overlioading for one hour after 12 hrs of continuous loading, brushless, self excited, self regulated through AVR, continuous duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H insulation, including terminal box suitable for cable termination as required.

Base Frame - Both the engine and alternator shall be mounted on suitable base frame made of MS channel which shall be installed on cement concrete foundation and vibration isolating arrangement as per recommendations of manufacturer.

The DG set is to be installed on the ground floor on by making the foundation (done by the supplier/contactor only). Unloading , loading , and installation shall be in the scope of contractor.

Inbuilt Fuel tank of standard capacity complete with inlet and outlet connections, oil indication gauge, drain plug, air breather, fuel transfer system for automatic fuel refilling system with pump, piping, valves, level indicators etc. complete. Apart from inbuilt tank 990 liters day tanks treated with anti corrisive treatment to be provided with each DG set

Fuel oil required for testing the DG set as per IS Shall be supplied by the contractor.

Tank shall be Provided with Low/High level sensor and alarm indication.

Exhaust System - Exhaust manifold with silencer complete with mineral wool / rock wool insulation on all sides, with chicken mesh wrapping and aluminium sheet cladding complete as required.(Minimum Height : 15 meter)

The D G set should be supplied with required hardware for external PLC based auto load management system.

Starting system - 12/24 Volt DC starting system comprising of starter motors : voltage regulator and arrangement for initial excitation complete with suitable nos. lead acid type batteries of suitable AH.

Ventillation System - Arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per standard specifications.

Exhaust System - Supplying and fixing of exhaust pipe of suitable dia gas welded black MS B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibrations mountings, insulations of exhaust system with mineral wool/rockwool 50mm thick wiremesh & aluminium cladding etc. and supporting steel structure, civil foundation etc. as required complete in all respect. (APPROX. 35 METERS OR AS PER CPCB NORMS)

NS - 3 Supply installation Testing and Commissioing of Indoor 2 megapixel wide angle 1080P IP dome camera with 3.6mm builting fixed lens with minimum illumination of 0.1 lux F1.2 50IRE with IR LEDs that can light for making it true day & night camera with intelligent motion detection.

NS - 4 Supply installation Testing and Commissioing of Indoor 2 megapixel wide angle 1080 IP bullet camera with 3.6mm builting fixed lens with minimum illumination of 0.1 lux F1.2 50IRE with IR LEDs that can light for making it true day & night camera with intelligent motion detection.

NS - 5 Supply installation Testing and Commissioing of Outdoor 2 megapixel wide angle 1080 IP bullet camera with 3.6mm builting fixed lens with minimum illumination of 0.1 lux F1.2 50IRE with IR LEDs that can light for making it true day & night camera with intelligent motion detection with weatherproof housing IP66 proetction with operating temp 0-50degree C.

NS - 6 Supply Installation testing commissioing of 32 channel Industrial Grade NVR with H265 compression 4 MP Camers recording and playback and event triggering with inteligent video analytics and motion detection with hard disk support capacity upto 8TB, USB, DVD-RW, Flexible search capabilities, Multievent Recording. Storage of 15 Days recording

NS - 7 Supplying, Installation, Testing & Commissioning of 8 Port PoE Switch with 2 Nos. SFP Module complete as required

NS - 8 Supplying, Installation, Testing & Commissioning of 24 Port PoE Switch with 2 Nos. SFP Module complete as required

NS- 9 Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel

NS - 10 SITC of Internal SATA 6 Tb hard disk complete as required

NS - 11 SITC of outdoor type 11KV 3-Way (1-I/C + 1 O/Gs) CSS/PSS consisting of 11KV RMU switch with VCB circuit breaker as protection along with protection relays O/C,E/F,U/V & O/V with CT along with Metering on HT side + 500KVA oil type 11KV/415V Transformer (IS:1180-LVL II) with OFF load tap changer (+10% to -10%) in steps of 2.5%, along with 800A 4P ACB-1no. LT Switchgear with all inter connections,accessories as per specifications etc complete as required in all aspects.

NS - 12 Supply,installation, testing & commissiong of micro processor / DSP controlled 15 KVA in parallel (N+1) UPS with IGBT based rectifier to achieve THDI < 2% for linear load and < 3% for non linear load, input power factor of greater than 0.99 at 100% loading, output power factor .9 and efficiency should be 92% minimum with True Online Double Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT technology on rectifier, charger and inverter section, with Three Phase input and Three phase output UPS system with inbuilt input Delta -Star Cu K13 Isolation Transformer, TVSS, surge current capacity 50kA including all mode protection, also including Microprocessor based Digital Automatic phase sequence controller.Sealed Maintenance free batteries for 15 kVA UPS to provide 15 Mins, backup time with inerconnectors and Rack. Complete in all respect.

NS - 13Supply,installation, testing & commissiong of micro processor / DSP controlled 10 KVA in parallel (N+1) UPS with IGBT based rectifier to achieve THDI < 2% for linear load and < 3% for non linear load, input power factor of greater than 0.99 at 100% loading, output power factor .9 and efficiency should be 92% minimum with True Online Double Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT technology on rectifier, charger and inverter section, with Three Phase input and Single phase output UPS system with inbuilt input Delta -Star Cu K13 Isolation Transformer, TVSS, surge current capacity 50kA including all mode protection, also including Microprocessor based Digital Automatic phase sequence controller.Sealed Maintenance free batteries for 15 kVA UPS to provide 15 Mins, backup time with inerconnectors and Rack. Complete in all respect.

NS - 14 Supply,installation, testing & commissiong of micro processor / DSP controlled 7.5 KVA in parallel (N+1) UPS with IGBT based rectifier to achieve THDI < 2% for linear load and < 3% for non linear load, input power factor of greater than 0.99 at 100% loading, output power factor .9 and efficiency should be 92% minimum with True Online Double Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT technology on rectifier, charger and inverter section, with Single Phase input and Single phase output UPS system with inbuilt input Delta -Star Cu K13 Isolation Transformer, TVSS, surge current capacity 50kA including all mode protection, also including Microprocessor based Digital Automatic phase sequence controller.Sealed Maintenance free batteries for 15 kVA UPS to provide 15 Mins, backup time with inerconnectors and Rack. Complete in all respect.

LIGHTING FIXTURE AND FANS

Supplying, Installation, Testing & commisioning of following type LED Surface / Reccesed mounted light fixture complete with PDC Aluminium housing for enhances heat dissipation along with driver with safety protections, PF>0.95 and should give minimum 120 lumens/Watt. Fixtures should be certified for mimimum of 70% lumens maintenance till 50,000 burning hours of usage, CRI ≥ 80, CCT should be 5700-6000 Kelvin or as specified by the architect in all aspects. With 2 Years Warranty on LED and Driver.

22 watt 4 feet LED Batten

15W LED Downlghter

10W LED Downlghter

25 watt 4 feet LED Suspended light

28-36W 2'x2' LED Panel

10W LED Bulkhead Fixture

10 watt 2 feet LED Tube

25 Watt 4feet / 8feet LED recessed linear light for made of extruded alluminium, with flexibility of cascading for a seamless effect if required with Endcaps.

25-50mm LED Profile lighting system with trim, made of extruded aluminium, with high performance PMMA diffuser, LED versions with energy-efficient LEDs and high CRI, 15W/Mtr LED Strip

Wall mounted LED bracket lights (10-15W)

Supply, installation, testing & commissioning of 300 mm 900 RPM exhaust fan complete with louver and bird guard screen with 3 core flexible wire as required complete in all respect.

Supply and Fixing of 400mm 240V, 1 phase Wall Fans oscillating type with in built fan regulator complete with all accessories with connection with three core copper wire of suitable size complete as required.

WIRING FOR TELEPHONE & DATA POINTS

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding plate etc .as required.

Data outlet one module for Data Points (RJ-45)

Supplying and fixing of the following sheet steel clad wall / recess mounting telephone tag blocks of krone make constructed from 14 SWG sheet steel finished with red oxide coating of two coats of paint with hinged gasketted powder coated door and complete.

200 pairs MDF

100 pairs

50 pairs

10 pairs

Providing and fixing of patch cords 1mtr length complete as required.

Supply , Installtion , Testing and comissioning of following wall mounted rack with front sheet steel glass door, top & bottom cover with cable entry provision, fans , 2 cable managers , satationary shelf , 2 Nos of hardware pkts complete as required.

42 U (Floor Mounted)

Supply , Installtion , Testing and comissioning of loaded jack/patch panels for LAN cable termination complete as required.

Supply , Installtion , Testing and comissioning of loaded jack/patch panels for LAN cable termination complete as required.

Supply , Installtion , Testing and Comissioning of armoured 6 core Singlemode OFC cable for interfloor switches connectivity

Supply , Installtion , Testing and Comissioning of 6 port loaded LIU with LC adaptor plates , pigtel cables etc complete as required.

Supply , Installtion , Testing and Comissioning of 24 port loaded LIU for with LC adaptor plates , pigtel cables for core switch to access switch connectivity over fiber.

Supply , Installtion , Testing and Comissioning of LC-LC singlemode fiber patch cord for LIU to switch connectivity.

SITC of Core Switch should have Min 24 x 1 G Based SFP+ port , Min 1 x QSFP+ port , 2x Stacking port comprising 400 Gbps of stacking bandwidth from day 1 ,Min 2xQSFP28 Port from day1, Support less than 50 Millisecond convergence based of RFC 3619/REP/G.8032 , Min Operating temp 0-50 Degree C ,Must have Common criteriacertification EAL3/NDcPP/NDPP,CE.2 and CB certified.RPS Support . Min 850Gbps switching backplane ,Min 4GB RAM, 32GB Memory, Min 270K Mac address.Auto adustable fan based on temperture variation.

SITC of Access switch should have 24 x10/100/1000T port , Min 8 x1 G SFP port , should be upgradable to Min 4x 10 G based SFP+ port , 2x Stacking port comprising 40 Gbps of stacking bandwidth from day 1 ,Support less than 50 Millisecond convergence based of RFC 3619/REP/G.8032 , Min Operating temp 0-50 Degree C ,Must have Common criteriacertification EAL3/NDcPP/NDPP, should support AVB,CE.2 and CB certified.Min 370 Watt PoE/PoE+ power budget based on IEEE 802.3af/IEEE 802.3at,RPS Support, Min 1GB RAM & 4GB Flash.Auto adustable fan based on temperture variation.

SITC of Pure IP at core server Based voice solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility ,350 IP users License ,01 Nos. 40 IP Operator Console and 250 analog phones ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Redundant server in active-Active mode.

SITC of Type 2 IP Phone with 2 Voip accounts, 2 Lines , HD Voice,Graphic LCD display with backligh.

SITC of Type 1 IP Phone 1 VoIP account , Full duplex speaker phone, IPV6, 2xLAN, PoE

SITC of analog phones.

SITC of the WLAN solution should have comprehensive integrated security features that include layer 2-7 statefulpacket filtering firewall including for branch and remote offices. AP indoor 3x3 with 802.11 a/b/g/n/ac support and should have disaster recovery mechanism automatically by taking role of controller in terms of controller failure

SITC of Wirelss controller to support Min 512 AP in future , ready to support min 100 AP from from Day1 .Min 2x USB ports , Min 16 K Wirelss client support , Min 4 GB RAM ,Min 32 GB Storage , Same make as switch.WLAN Controller should be Hardware appliance 1U Rack mountable

Supply and fixing of following size of under floor GI raceway for distributing LV and ELV cabling in screed floor installations particularly suitable for application requiring EMC screening. Raceway should be made up of Pre galvanized sheet with thickness of 1.6mm consist of body and cover. Cover fitted on to the body with screw and can be opened easily if required. Raceway should be supplied with required accessories fixing brackets and coupling plats as required.

300mm wide x 50mm deep with compartment

600mm wide x 50mm deep with compartment

SITC of junction box of following sizes adjustable height in the existing metal / GI raceway complete maintaing perfect separation and 90 degree cross overs between data and power cables in existing floor complete as required.

LT CABLES

Supplying of following sizes of XLPE PVC insulated PVC sheathed armoured alminum conductor power cable of 1.1 KV grade as required confirming to IS 7098 (Part 1) 1988

3-5 x 400 sq.mm

3-5 x 185 sq.mm

3-5 x 120 sq.mm

3-5 x 95 sq.mm

3-5 x 70 sq.mm

3.5 x 50 sq.mm

4 x 25 sq mm

4 x 16 sq mm

4 x 6 sq.mm

4 x 4 sq.mm

Supplying of following sizes of XLPE PVC insulated PVC sheathed armoured control copper conductor power cable of 1.1 KV grade as required confirming to IS 7098 (Part 1) 1988

4 C x 6 Sqmm cable (Copper)

4 C x 4 Sqmm cable (Copper)

4C x 2.5 sq.mm cable (Copper)

3 C x 2.5 Sqmm cable( Copper Control cabling)

HT CABLES

Supply, testing and commissioning of following 11 KV grade HT XPLE insulated, PVC sheathed FR cable in ground/pipe complete as required.

3c x 95sq mm

Supplying and making cable end termination with heat shrinkable, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required (FOR INDOOR & OUTDOOR): 95 sq. mm

Supplying, of control cable 10 core 2.5 sq.mm. PVC insulated copper conductor 1.1 kV grade, armoured control cable in gorund / trench as required complete in all respect.

LT PANELS

SITC of cubical type LT panel suitable for 415V 3 phase 4 wire 50 Hz AC supply system fabricated in compartmentalized design form CRCA sheet steel of 2mm thick for frame work and covers, 3mm for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 2000Amps capacity extensible type TPN aluminium alloy bus bars of high condunctivity DMC/SMC bus bars of high conductivity DMC/SMC bus bar supports with short circuit withstand capacity of 31MVA for 1 sec, bottom base chanel of MS section not less than 100mmx50mmx5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25mmx5mm at the rear with 2nos. earth studs solid connections from main bus bar to switchgears with required size of Al. bus bars and control wiring with FRLS copper conductor S/C cable cable alleys cable gland plates in two half i/c providing following

Ics = 100% Icu

All ACB's will be EDO microprocessor based

All MCCB's will be with Microprocessor based with LIG protection

Incomers shall be Electrically & Mechanically Interlocked with bus coupler & each other. No 2 supplies should get mixed up

Busbars shall be TPN with Neutral Bus being half the size of phase busbar. Busbar shall be PVC sleeved as per IS 375

Fault withstand capacity of the panels should be 50 KA, Icu=Ics=Icw for 1 second

TYPE 1+2 SPD WILL BE PROVIDED AT I/C IN MAIN LT PANEL & TYPE 2 FOR ALL FLOOR SDB's with indicator of how much life remaining for SPD end of life indication.

MAIN LT cum EMG PANEL

PLC based Auto synchronization, Load sharing, Load Balancing Panel for 2nos. 250KVA DG Sets should be desgined in the Main LT Panel only

INCOMER - 1 (SOLAR)

1 No. 160A, 4P MCCB (25KA) with protections E/F,O/L,S/C release, U/V, shunt release, SPD, with NO & NC Auxiliary contacts.

Each Incomer Metering & Protection.

1 Set of Multifunction meter (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697

3 Nos. 160/5A ratio CTs 15 VA class 5P 10

3 Nos. phase indicating lights with control fuses.

under voltage protection

over voltage protection

IDMT protection

Reverse Power protection

Master Trip protection

1 Set of control fuses & control terminals.

3 Nos. breaker ON/OFF/TRIP indication lamp with 2A SP MCB.

INCOMER - 2 (500KVA TR)

1No. 800A, 4P EDO ACB (50KA) with protections E/F,O/L,S/C release, U/V, shunt trip coil, SPD, with NO & NC Auxiliary contacts, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolateed postion indicators, and frame earthing confirming to IS 1397-2:1993 as ammended upto date complete with follwoing accessories for each ACB/MCCB (ignore whatever is not required for MCCB)

Each Incomer Metering & Protection.

1 Set of MFM (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697

3 Nos. 800/5A ratio CTs 15 VA class 5P 10

3 Nos. phase indicating lights with control fuses.

under & Over voltage protection

over & under frequency protection

IDMT protection

Reverse Power protection

Master Trip protection

1 Set of control fuses & control terminals.

3 Nos. breaker ON/OFF/TRIP indication lamp with 2A SP MCB.

INCOMER - 3 & 4 (250KVA DG SET)

2 Nos. 400A, 4P MCCB (35KA) with protections E/F,O/L & S/C, SPD + Contactor

Each Incomer Metering & Protection

1 Set of MFM (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697

3 Nos. 400/5A ratio CTs 15 VA class 5P 10

3 Nos. phase indicating lights with control fuses.

under & over voltage protection

under & over frequency voltage protection

Reverse Power protection

1 Set of control fuses & control terminals.

3 Nos. breaker ON/OFF/TRIP indication lamp with 2A SP MCB

Bus Bar

1000 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip and i/c DMC/SMC bus bar cross sections, supports and their spacing etc. for withstanding fault level of 31MVA for 1 sec.

Outgoings

One (1) No. 400Amp TP+N MCCB (35 KA)

Two (2) Nos. 400Amp 4P MCCB (35 KA)

One (1) No. 250Amp 4P MCCB (35 KA)

Two (2) Nos. 160Amp 4P MCCB (25 KA)

Four (4) Nos. 125Amp 4P MCCB (16 KA)

Nine (9) Nos. 100Amp 4P MCCB (16 KA)

Four (4) Nos. 63Amp 4P MCCB (16 KA)

Three (3) Nos. 25Amp 4P MCB (10 KA)

TYPICAL FLOOR PANEL

INCOMER

1 no. 100A 4P MCCB along with SPD

Incomer Metering & Protection.

1 Set of MFM for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697

1 No.100/5A ratio CTs 15 VA class 5P 10

3 Nos. phase indicating lights with control fuses.

1 Set of control fuses & control terminals.

3 Nos. breaker ON/OFF/TRIP indication lamp with SP MCB.

Bus Bar

150A TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.

Outgoings :

Four (4) Nos. 63Amp 4P MCB (10 KA)

Three (03) Nos. 25Amp 4P MCB (10 KA)

Two (02) Nos. 40Amp DP MCB (10 KA)

4th FLOOR PANEL

INCOMER

1 no. 125A 4P MCCB along with SPD

Incomer Metering & Protection.

1 Set of MFM for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697

1 No.150/5A ratio CTs 15 VA class 5P 10

3 Nos. phase indicating lights with control fuses.

1 Set of control fuses & control terminals.

3 Nos. breaker ON/OFF/TRIP indication lamp with SP MCB.

Bus Bar

200A TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.

Outgoings :

Six (6) Nos. 63Amp 4P MCB (10 KA)

Two (02) Nos. 40Amp 4P MCB (10 KA)

Five (05) Nos. 25Amp 4P MCB (10 KA)

Two (02) Nos. 40Amp DP MCB (10 KA)

UPS PANEL

INCOMER

1 No. 63A, 4P MCB (10KA)

Each Incomer Metering & Protection.

1 Set of Multifunction meter (96x96mm) with communication port for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697

63/5A ratio CTs 15 VA class 5P 10, respectively

ON OFF indicating lights with control fuses.

Bus Bar

80A TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.

Outgoings :

Four (4) Nos. 40Amp 4P MCB (10 KA)

LIFT Panel

Incoming:

1 Nos. 100 amps, 16 kA, 4P MCCB with over current and short circuit release complete with

1 Set of phase indicating lamp with 2Amps. SP MCB backup.

Bus Bars:

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 415V,50 Hz., 150 amps, 16kA, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints.

Outgoing:-

3 Nos. 63A TPN MCCB of 16 kA

6 Nos. 16A DP MCB 'C' of 10 kA

2 Nos. 32A DP MCB 'C' of 10 kA

CAPACITOR PANEL - The capacitor banks in tier formation, Each capacitors specifications shall be MPP standard duty cylindrical construction capacitors with 7% De-tune reactors, 415Volts, 50 hz, Temp. Class-'C', Temp. of Air Surrounding the Capacitor - Max for 24hour- 45 deg. centigrade , Max. for a year 35 deg. Centigrad, Operating losses - 0.45 W / kVAr, Over current withstand capability, 1.5 times rated current, Inrush current withstand capability, 200 times rated current, Operating life - 100000 hours, Number of switching, 5000 operations per year, conforming to IEC 60831-1+2/IS 13340-42. Provide Thermostat controlled panel mounted heavy duty exhaust fan in each Capacitor Compartment

INCOMER

1Nos. 400 Amps TP+N MCCB 35 kA

SUB BUSBARS

500 amps TP, 25kA busbar chamber of suitable length with Aluminium busbars. All busbars and interconnections shall be of suitable size aluminium busbar, current density of aluminium shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.

RELAYs

Auto Matic Power factor correction Intelligent relay with multi functional display. The relay shall be sensitive to pick up 1% of rated current and correct the P.F accordingly.

1 No. off delay timer for manual operation.

OUTGOINGS

1 No. 50 KVAR Capacitor bank

3 Nos. 25 KVAR Capacitor bank

2 Nos. 15 KVAR Capacitor bank

2 Nos. 10 KVAR Capacitor bank

2 No. 05 KVAR Capacitor bank

1 No. 02 KVAR Capacitor bank

Design & Supply of cubicle type, LT outdoor feeder pillar, double door fully compartmentalised, dust and vermin proof, made out of 2 m.m. thick CRCA sheet steel, floor mounted, free standing, lockable, confirming to IP- 55, mounted on finished brick foundation, powder coated/ epoxy painted, cable entry from bottom, with following configuration- (FP)

STREET LIGHT

INCOMER :-

63A 4P MCB

100A TPN+E Aluminium bus bar & sub bus bar of 63A TPN

Suitable cable gland for 4.0Cx 16 sq. mm.

OUTGOING :-

10A SP MCB - 06 Nos.

16A SP MCB - 02 Nos.

40A 4P MCB - 01 Nos.

40A DP MCB - 01 Nos.

Astronomical Time Switch with programmable as required along with manual overirde & Contactor - 1 Set

EXTERNAL LIGHTS

Supply & erection of following 3 stepped steel tubular pole (swaged type) conforming to I.S.S, welded pole (swaged type) conforming to I.S.S, welded with mild steel base plate of size 30 cm x 30 cm x 6.00 mm thick including erection of pole in ground surrounded with 30 cm dia of 1:3:6 cement concrete and a plateform of 10 cm thick to the size of base plate at the bottom.

6 metres long single bracket pole duly Embedded 1.0 m below ground level conforming to 410-SP-2 of IS : 2713 (part-II) 1980, extending the top Section by 1.25 m and smoothly curved making an angle of 10o to 15o with the horizontal plane, bracket fitted with suitable size of mild steel nipple (minimum 10 cm in the bracket) to hold the fitting.

SITC of 4M (1m in & 3m out) MS Poles as per IS-1161 with latest amendment complete with 200x200x12mm MS base plate including PU paint after chemical traetment and CKT marking as per drawing.Tthe pole to be erected on cement concrete foundation of 1:2:4 with collar including 16A DP MCB & Busbar & excavatiom in all type of soil as required.

SITC of 60 ± 5% Watt LED street light made of Pressure Die Cast allumium housing with metal PCB. UV stablized PolyCarbonate diffuser. LED and Gear compartment separated through 360 degree air draught system for thermal management & sealed using pressure locks to achieve IP66. Bottom openable Hinge-able driver cover for ease of maintenance. PDC Alluminium housing finely powder coated in silver grey color. Silicon potted LED Driver to reduce impact of temperature, voltage, and current rise, with PF >0.95. Fixtures should be certified for ≥ 70% lumen maintenance till 50,000 burning hours of usage. LED's should be certified safe through compliance to IS 16108:2012. Fixture should be certified to give ≥ 100 lumens per Watt, CRI ≥ 70. CCT should be 5700 Kelvin. THD ≤ 5%. 2 Years manufacturers warranty on LED & Driver both.

SITC of 25 Watt LED Post Top street light made of Pressure Die Cast allumium housing with metal PCB. UV stablized PolyCarbonate diffuser. LED and Gear compartment separated through 360 degree air draught system for thermal management & sealed using pressure locks to achieve IP66. Bottom openable Hinge-able driver cover for ease of maintenance. PDC Alluminium housing finely powder coated in silver grey color. Silicon potted LED Driver to reduce impact of temperature, voltage, and current rise, with PF >0.95. Fixtures should be certified for ≥ 70% lumen maintenance till 50,000 burning hours of usage. LED's should be certified safe through compliance to IS 16108:2012. Fixture should be certified to give ≥ 100 lumens per Watt .CRI ≥ 70. CCT should be 5700 Kelvin. THD ≤ 5%.

Supplying and fixing of IP 65 rating 100W Flood Light made of Pressure Die cats Aluminium housing with PF>0.95, Silicon LED driver etc. complete including supply, wiring and connection with 3x2.5sq.mm. PVC insulated stranded copper conductor and for earthing as required.

Supplying & fixing of IP 65 rating 8W Bollard Light made of pressure die cast aluminium housinf with UV stablized polycarbonate complete including supply,wiring & connections with PVC insulated stranded copper conductor and for earthing as required.

SITC 15 Watt LED Up-down light made of Pressure Die Cast allumium housing. sealed to achieve IP65. PDC Alluminium housing finely powder coated in black color. Silicon potted LED Driver to reduce impact of temperature, voltage, and current rise, with PF >0.95. CCT should be as per architects choice.

SITC of 7.2 W/ Mtr. IP 67 rated flexible outdoor LED strip CRI>80 along with linear channel.

MISC. / SAFETY ITEMS

S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work.

Supplying of non-skid rubber mat 12mm thick and 1000mm width as required including cutting to required lengths of approved make to withstand 15KV dielectric strength as per IS 5424 : 1969

Providing and fixing of set of 4nos. 9.5 litre capacity GI bucket painted in post office red colour with prior coat of red oxide and written with white paint "FIRE" and mounted on MS angle iron frame with bracket of appropriate size & capacity i/c filling sand etc.

Supplying and fixing carbon dioxide fire extinguisher type 4.5 Kgs capacity of approved make with wall mounting bracket as required conforming to IS : 2878/1976.

Supplying of first aid box as approved complete with standard kit as prescribed by Indian Red cross as per IS 2217:1963

Providing and fixing M.V. danger notice plate of 200 mm x 150 mm made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required .

Supply and fixing of foam fire extinguishers, portable type 9 ltr capacity hanged on wall with bracket complete as required.

S/F of safety instruction chart in word duly framed with 5mm thick glass as required. (approx. from area 120sq mt)

CENTRALISED CONTROLLER

Supply, Installation, Testing and Commissioning of main Intelligent Touch Controller with plus adapter as per specifications to hook up indoor units as mentioned above. Controller shall however, be suitable for minimum 64 groups of indoor units. Centralized controller shall act as master controller for controlling of cooling mode of outdoor units and their associated indoor units. Controller shall be suitable of Remote Access with computer and shall have web access. Controller shall be suitable to autosequence the outdoor as well as indoor units catering to 24x7 operated areas as required. Controller shall be suitable to configured the inside temperature as per temperature set point on controller. Controller shall have time schedulling arrangement for Indoor Units as well as Outdoor Units. Quoted price shall be inclusive of all necessary cabling as required from ODU & IDUs to controller.

AIR HANDLING UNITS (AHUs)

FRESH AIR HANDLING UNITS WITH HRW

Supply, Installation, Testing and Commissioning of double skin treated fresh air handling units (AHUs) each comprising of following as per the specifications :

Casing of air handling units shall be in double skin construction. Inner skin shall be constructed out of 24 gauge plain GS sheet & outer skin in 24 gauge thick pre-plasticized GS sheet sandwitched between 50mm thick injected PU foam insulation of density not less than 40 Kg /CuM and complete with inspection doors, marine light, limit switch and control wiring as required. AHUs shall have access for all parts. AHUs shall be provided with thermal break profile. Each unit shall comprise of supply air stream (lower tier), Heat Recovery section complete with Heat Recovery Wheel (HRW) and Extract air stream (upper tier).

Fan section in both Supply & Exhaust air stream complete with backward curved DIDW type centrifugal fan with IP-55, IE3, TEFC squirrel cage induction motor suitable to operate on 415±10%V, 50Hz, spring type vibration isolators below Fans, 3 phase AC power supply and belt drive package. Fan outlet velocity shall not be more than 1800 FPM (9.2MPS). AHU Fan Power consumption shall not exceed 0.5W/CFM. Fan section should be complete with 25mm thick open cell nitrile rubber acoustic insulation with density within 140-240 Kg/m3 covered with perforated sheet. All fans should be AMCA certified. Motors shall be VFD compatible.

Pre-Filter (EU-4) section in both Supply & Exhaust air stream complete with 50mm thick washable synthetic fibre filters. Velocity across the filters shall not exceed 500 FPM. Filters shall have efficiency not less than 90% down to 10 Microns (EU-4/MERV-8). Filter material shall be non combustible type.

Fine filter section in Supply air stream complete with fine filters. Velocity across fine filters shall not exceed 500FPM. Filters shall have efficiency not less than 95% down to 1 Microns (EU-8/MERV-14). Filter material shall be non combustible type.

Heat Recovery Wheel (HRW) with minimum efficiency (Sensible + Latent) of 75%.

Fresh Air Intake Section complete with FA dampers in extruded aluminium construction.

Multiblade box type aluminium Dampers shall be factory fitted at outlet of each AHU.

In addition to the above, air handling units shall be provided with adequate vibration isolation pads and fire retardant flexible canvass connections made out of canvass sleeve. Sizes of air handling units shall not exceed as mentioned in the design drawings and air handling units shall conform to the design parameters mentioned in specifications.

The Fresh Air Handling Units shall be of following duty parameters :

Supply air quantity : 7500 Cfm Static Pressure : 80mm WG Motor Rating : 7.5HP Extract air quantity : 5000 Cfm Static Pressure : 60mm WG Motor Rating : 3.0 HP Heat Recovery Wheel Units as described above.

Floor Mounted AHUs- With Thermal Break Profile and Mixing Chamber

Supply, Installation, Testing and Commissioning of DX Based double skin Floor Mounted air handling units (AHUs) each comprising of following as per the specifications :

Casing of air handling units shall be in double skin construction. Inner skin shall be constructed out of 24 gauge plain GS sheet & outer skin in 24 gauge pre-plasticized GS sheet sandwitched between 50mm thick injected PU foam insulation of density not less than 40 Kg /CuM and complete with inspection doors and marine light, limit switch including control wiring as required. AHUs shall be provided with thermal break profile.

Fan section complete with backward curved DIDW type centrifugal fan/s, IP-55, IE3, TEFC squirrel cage induction motor suitable to operate on 415±10%V, 50Hz, spring type vibration isolators below Fans, 3 phase AC power supply and belt drive package. Fan outlet velocity shall not be more than 1800 FPM (9.2MPS)

Fan section should be completed with 25mm thick Armasound acoustic insulation covered with perforated sheet. All fans should be AMCA certified. Motors shall be VFD compatible.

Coil section with multirows deep DX coil of copper tube & copper header and aluminium fins construction having wall thickness of tubes not less than 0.5mm. Drain pan shall be made out of 18 gauge stainless steel duly insulated. Face velocity across cooling coil shall not exceed 500 FPM.

Pre-Filter (EU-4) section complete with 50mm thick washable synthetic fibre filters. Velocity across the filters shall not exceed 500 FPM.

Fine filter section complete with fine filters. Velocity across fine filters shall not exceed 500FPM. Filters shall have efficiency not less than 95% down to 1 Microns (EU-8/MERV-14).

AHUs shall be provided with mixing chamber with R/A & F/A openings as per approved shop drawing.

Multiblade box type zero leakage manually operated extruded aluminium volume control dampers shall be factory fitted at outlet of each AHU.

In addition to the above, air handling units shall be provided with adequate vibration isolation pads and fire retardant flexible canvass connections made out of canvass sleeve. Sizes of air handling units shall not exceed as mentioned in the design drawings and air handling units shall conform to the design parameters mentioned in specifications.

The Air Handling Units (AHUs) shall be of following duty parameters :

AHU No Capacity S.P Motor Rows of Area to

(TR/Cfm) (mmWG) Rating coil be fed

AH-1 17.6/6000 58-60 5.0 6 Office Area

AH-2 17.6/5000 58-60 3.0 6 Multipurpose Hall

AH-3 8.0/3500 58-60 2.0 6 Reception

Ceiling Suspended type TF AHUs - With Thermal Break Profile and Fresh air Intake Section

Supply, Installation, Testing and Commissioning of DX double skin air handling units (AHUs) each comprising of following as per the specifications :

Casing of air handling units shall be in double skin construction. Inner skin shall be constructed out of 24 gauge plain GS sheet & outer skin in 24 gauge pre-plasticized GS sheet sandwitched between 50mm thick injected PU foam insulation of density not less than 40 Kg /CuM and complete with inspection doors including control wiring as required. AHUs shall have access for all parts. AHUs shall be provided with thermal break profile and Fresh air Intake Section.

Fan section complete with forward/ backward curved DIDW type centrifugal fan/s, IP-55, IE3, TEFC squirrel cage induction motor suitable to operate on 415+10%V, 50Hz, vibration isolators below Fans, 3 phase AC power supply and belt drive package. Fan outlet velocity shall not be more than 1800 FPM (9.2MPS). Fan section should be completed with 25mm thick Armasound acoustic insulation covered with perforated sheet. All fans should be AMCA certified.

Coil section with multirows deep DX cooling/heating coil of copper tube & copper header and aluminium fins construction having wall thickness of tubes not less than 0.5mm. Drain pan shall be made out of 18 gauge stainless steel duly insulated. Face velocity across cooling coil shall not exceed 500FPM.

Pre-Filter (EU-4) section complete with 50mm thick washable synthetic fibre filters. Velocity across the filters shall not exceed 500 FPM.

Fine filter section complete with fine filters. Velocity across fine filters shall not exceed 500FPM. Filters shall have efficiency not less than 95% down to 1 Microns (EU-8/MERV-14).

Fresh Air Intake Section complete with FA dampers in extruded aluminium construction.

AHUs shall be complete with suspension arrangement, it shall also include spring type vibration isolators and rubber groomets etc. to make the installation totally vibration free.

Multiblade box type zero leakage manually operated extruded aluminium volume control dampers shall be factory fitted at outlet of each AHU.

In addition to the above, air handling units shall be provided with fire retardant flexible canvass connections made out of canvass sleeve. Sizes of air handling units shall not exceed as mentioned in the design drawings and air handling units shall conform to the design parameters mentioned in specifications.

The Air Handling Units (AHUs) shall be of following duty parameters :

AHU No Capacity S.P Motor Rows of Area to

(Cfm/TR) (mmWG) Rating coil be fed

TFA-1 700/6.4 48-50 0.75 6 Dining & Living Area

KIT FOR AHUs

Supply, Installation, Testing and Commissioning of VRF Kits for AHUs having all controllers & Electonic Expansion Valve (EEV) and temperature set arrangment. It Shall have cut off arrangement after a particular set value of Supply/Return air Temperature. Price should include all control cabling etc. and all necessary arrangements whether mentioned or not to make the system working.

For 12HP

For 10HP

For 8HP

VARIABLE FREQUENCY DRIVES

Supply, Installation, Testing and Commissioning of variable frequency drives for following Air Handling Units. Variable frequency drives shall be provided with necessary sensors and transmitters complete with control wiring in all respect as required and as per specifications. VFDs shall have built-in harmonic filters. The drives shall be suitable for the following motor rating. VFDs shall be housed in precoated, vandal proof enclosure with On/Off Push Buttons, Phase indication lights, A/M Switch and with adequate provisions for ventilation using a fan. The VFDs shall be able to receive the signals from multiple/combination of duct static pressure sensors/Temp. sensors and to ramp the speed of the motor.VFDs shall be suitable to take feed back and connectivity from all the DPS as mentioned below against each motor rating to facilitate averaging activity by VFD. Quoted price shall be inclusive of return air temperature sensor and necessary electrical switches including change over switch & copper cabling for integration with the AHU panel. VFDs shall be installed within Electrical panels as described under Section 'Electrical Works'. Overall protection of VFDs with Panels shall be IP-54.

VFDs shall be BMS compatible with Modbus RS 485 protocol.

(i) Sensing Range : 10mm to 50 mm WG

(ii) Output Signal : 4 mA to 20 mA

0 V to 10 V DC

AHU No Capacity Motor

(Cfm) Rating

INLINE FANS - ACOUSTICALLY LINED

Supply, Installation, Testing & Commissioning of inline fans for Fresh air supply complete with sheet metal casing, 25mm thick open cell nitrile rubber acoustic insulation, direct driven centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220±6 % volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of following characteristics : All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be complete with Plug Top & necessary power cable. Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for indoor installations.

Fan Capacity S.P Area to

No. (Cfm) (mmWG) to be exhausted

IF-1 550 14-15 Female & PH. Toilet

IF-2 500 14-15 Staff Dining Hall

IF-3 450 14-15 Male Toilet

IF-4 150 14-15 Visitor Toilet & Pantry

PROPELLER FANS

FLEXIBLE CANVASS CONNECTIONS

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation and Testing of Butterfly damper of GI sheet construction with two flap with round flange on one side and 10mm grove on other side for fixing of flexible duct with the help of band, 20 Gauge Frame 250mm dia & above, 22 Gauge Frame upto 200mm dia & 22 Gauge Blade in all sizes as per the specifications and shop drawings. 200 mm dia

Supply, Installation and Testing of non return dampers. NRDs to be installed in the ducts as per the specifications and shop drawings. Sample of NRDs to be got approved from consultants and Clients prior to procurement.

VAV BOXES

Supply, Installation, Testing and Commissioning of On Line type variable air volume boxes complete with necessary controllers, Heating-Cooling digital thermostat, Damper actuator, multi point pick-up inlet Air Flow velocity sensor and copper control wiring and necessary transformer etc. as required and as per the specifications. VAV Boxes should be BMS compatible. VAV Boxes should be suitable to working on Cooling & Heating mode as per requirement. VAV Box shall be of following design parameters :

Max. Air Qty. Min. Air Qty. Location

(Cfm) (Cfm)

Upto 500 50 As shown on Drg.

From 525 to 1000 From 50 to 100 As shown on Drg.

From 1025 to 1500 From 100 to 150 As shown on Drg.

From 1525 to 2000 From 150 to 200 As shown on Drg.

From 2025 to 2500 From 200 to 250 As shown on Drg.

From 2525 to 3000 From 250 to 300 As shown on Drg.

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted price shall be inclusive of necessary conduting, copper control cabling from the sensors to the respective VFDs as per "Approved Shop Drawings".

ELECTRICAL WORKS

AHU Panels

Supply, Installation, Testing and Commissioning of the following cubical type panels made out of 14 guage CRCA structure, base channel, complete with, moulded case circuit breakers, meters, indicating lamps, current transformer etc. Complete in all respects, insulated bus bars with heat shrinkable PVC sleeve in suitable bus chambers, interconnection, small wiring, name plate, danger plate, earth bus etc. & comprising of compartments with hinged door for each feeder & its accessories, cable alley with hinged doors, bus chamber with bolted door etc. The panel being of dust & vermin proof construction with rubber gasket attractively powder coating etc. The panel shall be free standing type / wall mounted type as per relavant drawing and comprising with the following :

Notes :

1. All MCCBs shall be with operating handle.

2. CTs burden shall be 15VA & accuracy class 1.0

3. CTs shall be cast resin type .

4. All MCCBs shall be with thermal magnetic

release.

5. All indication lights shall be LED type.

6. All meter shall be digital type.

7. The outgoing starter feeders for pumps, AHUs

& ventilation fans shall be provided

with push buttons & indicating lamps for

status indication.

8. Proper isolation switches to be

provided near AHUs units and

ventilation fans in weather proof enclosure.

9. Bimetal overload relay for all the

starters shall have built-in single

phasing prevention feature.

10. Electrical interlocking wiring shall be

11. Power cabling/wiring with necessary

earthing from source to each panel

and each exhaust fan shall be

provided by other agencies.

12. Necessary provisions shall be made in the panels

by means of providing necessary relays etc to

facilitate Building Automation System (BAS)

integration.

HRWP-1 - 9KW (IP 65 rated Panel)

(VFD Panel with By Pass Starter)

Incoming :

63 Amps ,TP MCCB with electronic release &

earth fault relay, door interlock and front drive

rotor kit-- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

Busbar

80 Amps TPN aluminium busbar having

suitable fault level, with PVC heat shrunk

sleeves on SMC/DMC supports.

Outgoings :

For Supply Fan - (1x7.5HP )

32 Amps, TP MCCB -- 1 set

Current Transformers -- 1 set

LED type ON & OFF indication lights -- 1 set

START-STOP Push Buttons -- 1 set

7.5HP DOL starter with built-in single phasing preventor & overload relay & adjustable timer-- 1 set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as requiredwith start-stop push buttons stay

put or lockable type - 1 set

For Exhaust Fan -(1x3.0HP )

25 Amps ,TP MCCB -- 1 set

Current Transformers -- 1 set

LED type ON & OFF indication lights -- 1 set

START-STOP Push Buttons -- 1 set

3.0HP DOL starter with built-in single phasing preventor & overload relay & adjustable timer-- 1 set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons stay

put or lockable type - 1 set

For HRW - (1x1.5HP)

25 Amps, TPN MCCB -- 1 set

Current Transformers -- 1set

LED type ON & OFF indication lights --1 set

START-STOP Push Buttons -- 1 set

1.5 DOL starter with built-in single phasing preventor & overload relay & adjustable timer-- 1 set

Contactors, Potential Free Contacts, Control wiring and safety circuit as required with start-stop push buttons stay put or lockable type -1 set.

For AHUs AHP-1 - 3.7KW (VFD Panel with By Pass Starter)

32 Amps ,TP MCCB -- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

LED type ON & OFF indication lights -- 1set

5.0HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer -- 1 set

START-STOP Push Buttons -- 1 set

to facilitate auto start of AHUs -- 1set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons

stay put or lockable type -1set

AHP-2 (Location: Near AHUs)

For AHUs AHP-2 - 2.2KW (VFD Panel with By Pass Starter)

25 Amps ,TP MCCB -- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

LED type ON & OFF indication lights -- 1set

3.0HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer -- 1 set

START-STOP Push Buttons -- 1 set

to facilitate auto start of AHUs -- 1set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons

stay put or lockable type -1set

For AHUs AHP-3 - 1.5KW (VFD Panel with By Pass Starter)

25 Amps ,TP MCCB -- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

LED type ON & OFF indication lights -- 1set

2.0HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer -- 1 set

START-STOP Push Buttons -- 1 set

to facilitate auto start of AHUs -- 1set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons

stay put or lockable type -1set

For AHUs AHP-3 - 0.55KW (VFD Panel with By Pass Starter)

25 Amps ,TP MCCB -- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

LED type ON & OFF indication lights -- 1set

0.75HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer -- 1 set

START-STOP Push Buttons -- 1 set

to facilitate auto start of AHUs -- 1set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons

stay put or lockable type -1set

Supply and fixing of 1.1 KV grade rubber mat 914.4 mm wide 6mm thick to withstand 1.1 KV dielectric strength in front of each panel.

SPLIT AC UNIT FOR GUEST ROOM

SPLIT PACKAGES -INVERTER

Supply, Installation, Testing and Commissioning of split units, each comprising of an outdoor and a single indoor unit as shown on the drawings and as per the specifications. Enclosures shall be factory Fabricated and painted to a smooth finish. Oudoor unit shall consist of hermatically sealed/ semi- hermatic scroll/rotary compressor/s, air cooled condenser with fan. Indoor unit shall consist of fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep DX- copper cooling coil with aluminium fins, thermostatic expansion valve, synthetic fibre filters, insulated drain pan, safety controls, safety controls, streiner, drier, thermostat, strainer, drier etc. all complete in a unit. Safety Controls shall include but not limited to HP/LP cutoff arrangement, Electrical safeties like overload protection, phase reversal, reverse polarity, phase imbalance etc. The quoted price shall be inclusive of full charge of refrigerant gas, vibration isolation arrangement.

Quoted price shall be inclusive of factory applied epoxy

coating (to prevent erosion of tubes & fins) of Outdoor units.

Refrigerant Shall be R410A/R407C/R-32.

Single phase Non-ductable split units with invertor compressor having 5 star rating :

1.5TR nominal capacity, split unit with single Hi wall non-ductable indoor unit with rotary compressor with corded remote controller & associated cable.

2.0TR nominal capacity, split unit with single Hi wall non-ductable indoor unit with rotary compressor with corded remote controller & associated cable.

2.5TR nominal capacity, split unit with single Cassette type indoor unit with rotary/scroll compressor with Decorative panel, corded remote controller & associated cable.

DX SPLIT UNIT FOR CRITICAL ROOMS

SPLIT PACKAGES

Supply, Installation, Testing and Commissioning of split units, each comprising of an outdoor and a single indoor unit as shown on the drawings and as per the specifications. Enclosures shall be factory Fabricated and painted to a smooth finish. Oudoor unit shall consist of hermatically sealed/ semi- hermatic scroll/rotary compressor/s, air cooled condenser with fan. Indoor unit shall consist of fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep DX- copper cooling coil with aluminium fins, thermostatic expansion valve, synthetic fibre filters, insulated drain pan, safety controls, safety controls, streiner, drier, thermostat, strainer, drier etc. all complete in a unit. Safety Controls shall include but not limited to HP/LP cutoff arrangement, Electrical safeties like overload protection, phase reversal, reverse polarity, phase imbalance etc. The quoted price shall be inclusive of full charge of refrigerant gas, vibration isolation arrangement.

Quoted price shall be inclusive of factory applied epoxy

coating (to prevent erosion of tubes & fins) of Outdoor units.

Refrigerant Shall be R410A

Split Unit Model proposed for critical areas shall be capable of working on cooling mode during peak winters with ambient temperatures of 5-6degC.

Single phase Non-ductable split units with

Rotary compressor :

1.5TR nominal capacity, split unit with single high wall non-ductable indoor unit with rotary compressor with corded remote controller & associated cable.

2.0TR nominal capacity, split unit with single high wall non-ductable indoor unit with rotary compressor with corded remote controller & associated cable.

Supply, Installation, Testing and Commissioning of PLC for Auto Sequencing of Split units with micrprocessor based controller along with enclosure/accessories & Control wiring having facility for configuration of the same as per requirement for sequenced Start/Stop for following split units. Controller shall be capable of setting Room Temperature and run machines based on set temperature.

KITCHEN VENTILATION ARRANGEMENT

SCRUBBER (FOR KITCHEN EXHAUST)

ELECTROSTATIC PRECIPITATOR FOR DRY TYPE AIR SCRUBBER

FLOOR MOUNTED TYPE

Supply, Installation, Testing and Commissioning of ESP for dry type scrubber (packaged type) comprising of following as per the specifications :

The Electrostatic section shall be 90-95% in single pass as per DOP test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 micron through solid state power supply. Collector cell shall be of permanent type and slide out facility for easy removal for cleaning. Operating voltage shall be 220±6 % volts, 50 Hz/ 1Ph, power consumption shall not exceeding 50 watts per unit upto 7500 Cfm. System should be fitted with interlock switch for safety. Velocity across the air cleaner shall not be more than 500 FPM. Scrubber shall be provided with pre-filters as required.

ESPs shall be provided with UV & Ozone Odours removers.

ESP Modules shall have necessary provision in terms of flanges to facilitate Ducts/Plenum connections as per approved shop drawings.

In addition to the above, ESP shall be provided with adequate vibration isolation pads and fire retardent flexible canvass connections made out of canvass sleeve.

ESP for Dry Scrubber Machines shall be of following duty parameters :

Air Qty. - 4800Cfm Max. Pressure Drop - 10-11mmWG

SISW FANS

Supply, Installation, Testing & Commissioning of floor mounted smoke spill type backward curved SISW type centrifugal fan/s complete with IE3, class 'F' insulation, IP-55, TEFC squirrel cage induction motor with class 'F' suitable to operate on 415+10%V, 50Hz, 3 phase AC power supply and belt drive package. Fan outlet velocity shall not be more than 2000 FPM (10.16 MPS) as per the specifications. Motor shall be mounted outside the hot air flow path. All fans should be AMCA certified.

SISW Fans as described above with following duty parameters :

Fan Capacity S.P Motor Area being

No. (Cfm) (mmWG) Rating fed

SISW-1 4800 78-80 5.0 Kitchen

DOUBLE SKIN AIR COOLING MACHINES

(AIR WASHERS)

Supply, Installation, Testing and Commissioning of double skin type evaporative air cooling machines (packaged type) each comprising of following as per the specifications :

Casing of air washer shall be in double skin construction. Inner skin shall be constructed out of 24 gauge plain GS sheet & outer skin in 24 gauge pre-plasticized GS sheet sandwitched between 50mm thick injected PU foam insulation of density not less than 40 Kg /CuM and complete with marine light, limit switch & inspection doors including control wiring as required. Air washer shall have access for all parts.

Fan section complete with backward curved DIDW type centrifugal fan/s, IE3, IP-55 rated TEFC squirrel cage induction motor suitable to operate on 415+10%V, 50Hz, 3 phase AC power supply and belt drive package. Centrifugal fans shall be coated with epoxy paint as specified. Fan outlet velocity shall not be more than 2000 FPM (10.16 MPS). All fans shall be VFD compatible & AMCA certified.

Air washer wet section shall be complete with 300mm thick cellulose based paper fills, drift eliminators, water distribution system complete with FRP spray headers, strainer of fine mesh brass screen, globe valve, float valve, quick fill, over flow & drain connections, GI medium class piping and 3/1 phase monobloc pumps of 1HP/ 1.5HP/2HP motor rating as required according to the capacity of air cooling machines. Inner skin of wet section including fills mounting frame shall be constructed out of stainless steel SS- 304 A grade of appropriate thickness. Sump shall be made out of 1.25mm thick SS-304 A grade stainless steel. Velocity across the paper fills not to exceed 500 FPM.

Filter section complete with 50mm thick MERV-8 Filters. Velocity across the filters shall not exceed 500 FPM.

Airwasher should be provided with adequate space between eliminator & fan to avoid water carryover.

The Evaporative Air Cooling Machines (EAC) shall be of following duty parameters :

Air washer shall be Vertical/ Horizontal type as per approved Shop Drawing.

M/c No Capacity S.P Motor Area to

(Cfm) (mmWG) Rating be fed

EAC-1 4300 45-46 3.0 Kitchen

VARIABLE FREQUENCY DRIVES

Supply, Installation, Testing and Commissioning of variable frequency drives for following Exhaust air unit. Variable frequency drives shall be provided with necessary sensors and transmitters complete with control wiring in all respect as required and as per specifications. VFDs shall have built-in harmonic filters. The drives shall be suitable for the following motor rating. VFDs shall be housed in precoated, vandal proof enclosure with On/Off Push Buttons, Phase indication lights, A/M Switch and with adequate provisions for ventilation using a fan. Quoted price shall be inclusive of necessary electrical switches including change over switch & copper cabling for integration with the Fan panel. VFDs shall be installed within Electrical panels as described under Section 'Electrical Works'. Overall protection of VFDs with Panels shall be IP-54. Quoted price shall be inclusive of all neccessary arrangement as required to make the VFDs proper functional.

(i) Sensing Range : 10mm to 50 mm WG

(ii) Output Signal : 4 mA to 20 mA

0 V to 10 V DC

AHU No Capacity Motor Area to

(Cfm) Rating be fed

SISW-1 4800 5.0 Kitchen

AW-1 4300 3.0 Kitchen

PANELS

Supply, Installation, Testing and Commissioning of the following cubical type panels made out of 14 guage CRCA structure, base channel, complete with, moulded case circuit breakers, meters, indicating lamps, current transformer etc. Complete in all respects, insulated bus bars with heat shrinkable PVC sleeve in suitable bus chambers, interconnection, small wiring, name plate, danger plate, earth bus etc. & comprising of compartments with hinged door for each feeder & its accessories, cable alley with hinged doors, bus chamber with bolted door etc. The panel being of dust & vermin proof construction with rubber gasket attractively powder coating etc. The panel shall be free standing type / wall mounted type as per relavant drawing and comprising with the following:

Notes :

1. All MCCBs shall be with operating handle.

2. CTs burden shall be 15VA & accuracy class 1.0

3. CTs shall be cast resin type .

4. All MCCBs shall be with thermal magnetic

release.

5. All indication lights shall be LED type.

6. All meter shall be digital type.

7. The outgoing starter feeders for pumps,AHUs

& ventilation fans shall be provided

with push buttons & indicating lamps for

status indication.

8. Proper isolation switches to be

provided near air handling units and

ventilation fans in weather proof enclosure.

9. Bimetal overload relay for all the

starters shall have built-in single

phasing prevention feature.

10. Electrical interlocking wiring shall be

provided as per system requirement.

11. Power cabling/wiring with necessary

earthing from source to each panel

and each exhaust fan shall be

provided by other agencies.

12. All HVAC equipment shall be compatible with

BMS and necessary provisions to be made

in each panel.

KVF PANEL -1- 7KW

For 4300Cfm Air Washer & Pump and 4800Cfm Dry Scrubber & ESP

Incoming :

32 Amps ,TP MCCB with electronic release &

earth fault relay, door interlock and front drive

rotor kit-- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

Busbar

40 Amps TPN aluminium busbar having

suitable fault level, with PVC heat shrunk

sleeves on SMC/DMC supports.

Outgoings :

For Air Washer - 1 No (1x2.2KW)

25 Amps ,TP MCCB -- 1 set

switch- 1 set

Current Transformers -- 1 set

LED type ON & OFF indication lights -- 1 set

START-STOP Push Buttons -- 1 set

3.0HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer-- 1 set

to facilitate auto start of unit

after restoration of power -- 1 set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as requiredwith start-stop push buttons stay

put or lockable type - 1 set

For Scrubber Fan - 1 No (1x3.7KW)

25 Amps ,TP MCCB -- 1 set

switch- 1 set

Current Transformers -- 1 set

LED type ON & OFF indication lights -- 1 set

START-STOP Push Buttons -- 1 set

5.0HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer-- 1 set

to facilitate auto start of unit

after restoration of power -- 1 set

Space for VFD Mounting

Ventilation Fan for VFD-- 1Set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as requiredwith start-stop push buttons stay

put or lockable type - 1 set

For Pump of Air washer (1x1.0HP) -single phase

20 Amps ,TP MCB -- 1 set

LED type ON & OFF indication lights -- 1 set

START-STOP Push Buttons -- 1 set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as requiredwith start-stop push buttons stay

put or lockable type - 1 set

For Electrostatic Section

20 Amps ,TPN MCB -- 1 sets

switch- 1 sets

Current Transformers -- 1 sets

LED type ON & OFF indication lights -- 1 sets

START-STOP Push Buttons -- 1 sets

MECHANICAL VENTILATION AND SMOKE ARRANGEMENT

VANE AXIAL FANS

Supply, Installation, Testing and Commissioning of axial flow fans (Vane axial type) complete with GI casing, impeller and flame proof motor with class 'F" insulation for make - up air system and class "H" insulation for smoke evacuation system as shown in the drawings and as per the specifications. Fans with class "H" motors should be suitable for operating for mimimum 2 Hrs at 250-300 degC temp. Fan Casing should be provided with Special Designed Integral Straightening Vanes to reduce turbulence, provide high performance & low noise level. Axial fans shall be suitable for operation on 415±10% volts, 50Hz, 3 phase AC power supply. Axial flow fans shall be provided with inlet and outlet cones fabricated at site using GS sheet having thickness not less than 20G and necessary vibration isolation arrangement including spring type vibration isolators and rubber groumet etc. as required. Fans shall be IP-55 rated. All fans should be AMCA certified. Motor shall be IE-2 type. Fan outlet velocity shall not be more than 11.5 MPS.

Fans shall be Floor Mounted and Ceiling suspended as per approved Shop Drawing.

Fan Capacity S.P Motor Area being Fan

No. (Cfm) (mmWG) Rating/Class fed Dia/RPM

VAF-1 5100 30-32 3.0 Basement 560/1450

Class'H' Normal/ Smoke Exhaust

TUBE AXIAL FANS

Supply, Installation, Testing and Commissioning of axial flow fans (tube axial type) complete with MS casing, impeller, flame proof motor with class 'F" insulation for make - up air system and class "H" insulation for normal and smoke evacuation of basement as shown in the drawings and as per the specifications. Fans with class "H" motors should be suitable for operating for mimimum 2 Hrs at 250-300 degC temp. Axial fans shall be suitable for operation on 415±10% volts, 50Hz, 3 phase AC power supply. Axial flow fans shall be provided with inlet and outlet cones fabricated at site using GS sheet having thickness not less than 20G and necessary vibration isolation arrangement including spring type vibration isolators and rubber groumet etc. as required. Fans shall be IP-55 rated. All fans should be AMCA certified. Motor shall be IE-2 type. Fan outlet velocity shall not be more than 15 MPS.

Fan Capacity S.P Motor Area being Fan

No. (Cfm) (mmWG) Rating/Class fed Dia/RPM

Smoke Evacuation

TAF-1 5100 30-32 3.0 Basement 560/1450

Class'H Smoke Exhaust

Pressurization

TAF/P-1 7600 28 5.0/Class'F' Liftwell 630/1450

TAF/P-2 10200 30 7.5/Class'F' Lift Lobby 710/1450

INLINE FANS

Supply, Installation,Testing & Commissioning of circular /rectangular inline fans for exhaust air complete with sheet metal casing, direct driven centrifugal fan, motor with proper protection and inspection door. Fan shall be suitable for operation on 220±6 % volts, 50 Hz,1phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be installed as shown in the drawings and will be of following characteristics : All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be complete with Plug Top & necessary power cable. Fans shall have low noise level and shall be suitable for indoor installations.

Fan Capacity S.P Area to

No. (Cfm) (mmWG) to be exhausted

IF-1 750 14-15 Pump Room

IF-2 600 14-15 LT Room

IF-3 550 14-15 HT Room

ELECTRICAL WORKS

MVS PANELS

Supply, Installation, Testing and Commissioning of the following cubical type panels made out of 14 guage CRCA structure, base channel, complete with, moulded case circuit breakers, meters, indicating lamps, current transformer etc. Complete in all respects, insulated bus bars with heat shrinkable PVC sleeve in suitable bus chambers, interconnection, small wiring, name plate, danger plate, earth bus etc. & comprising of compartments with hinged door for each feeder & its accessories, cable alley with hinged doors, bus chamber with bolted door etc. The panel being of dust & vermin proof construction with rubber gasket attractively powder coating etc. The panel shall be free standing type/ wall mounted type having IP - 65 Protection suitable for outdoor installation as per relavant drawing and comprising with the following:

Notes :

1. All MCCBs shall be with operating handle.

2. CTs burden shall be 15VA & accuracy class 1.0

3. CTs shall be cast resin type .

4. All MCCBs shall be with thermal magnetic

release.

5. All indication lights shall be LED type.

6. All meter shall be digital type.

7. The outgoing starter feeders for pumps, AHUS

& ventilation fans shall be provided with push

buttons & indicating lamps for status indication.

8. Proper isolation switches to be

provided near air handling units and

ventilation fans in weather proof enclosure.

9. Bimetal overload relay for all the

starters shall have built-in single

phasing prevention feature.

10. Electrical interlocking wiring shall be

provided as per system requirement.

11. Power cabling/wiring with necessary

earthing from source to each panel

and each exhaust fan shall be

provided by other agencies.

12. Panel in case of outside installation shall

be provided with IP-65 Protection.

13. All HVAC equipment shall be compatible with

BMS and necessary provisions to be made

in each panel.

MVS Panel-1 to 2 -For Normal/ Smoke Exhaust For 5100Cfm Axial Fans- 2.2KW each

25 Amps ,TP MCCB -- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

LED type ON & OFF indication lights -- 1set

3.0HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer -- 1 set

START-STOP Push Buttons -- 1 set

to facilitate auto start of AHUs -- 1set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons

stay put or lockable type -1set

MVS Panel-3 & 4 -For pressurization For 7600 Cfm Axial Fans- 3.7KW each

32 Amps ,TP MCCB -- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

LED type ON & OFF indication lights -- 1set

5.0HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer -- 1 set

START-STOP Push Buttons -- 1 set

to facilitate auto start of AHUs -- 1set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons

stay put or lockable type -1set

MVS Panel-5 -For pressurization For 10200 Cfm Axial Fans- 5.5KW each

40 Amps ,TP MCCB -- 1set

switch -- 1set

switch- 1set

Current Transformers - 1set

LED type RYB phase indication lights- 1set

LED type ON & OFF indication lights -- 1set

7.5HP DOL starter with built-in single phasing

preventor & overload relay & adjustable timer -- 1 set

START-STOP Push Buttons -- 1 set

to facilitate auto start of AHUs -- 1set

Contactors, Potential Free Contacts, Control wiring and

safety circuit as required with start-stop push buttons

stay put or lockable type -1set

DEMAND CONTROL VENTILATION ARRANGEMENT

VAV BOXES- FOR FRESH AIR

Supply Installation, Testing and Commissioning of GI Pressure independent fresh air VAV boxes acoustically lined suitable to work with CO2 sensors complete with necessary controllers, Damper actuator, multi point pick-up inlet Air Flow velocity sensor and copper control wiring and necessary transformer etc. as required and as per the specifications. Controller should have UL listed & having 4UI+2AO+2DO. Controller shall be accept 0-10V output from the CO2 controller.The VAV boxes shall be BMS compatible.

Max. Air Qty. Min. Air Qty. Location

(Cfm) (Cfm)

Upto 1600 1300 AHU Rooms

CO2 Sensors with LED Display

Supply, Fixing and Testing of CO2 Sensors with LED Display. Sensors should be capable to give command to VAV Box directly after increasing/decreasing of CO2 level beyond certain specified levels. Quoted price shal be inclusive of Power cabling and control cabling as required between CO2 sensor and VAV/BMS Controllers etc. Price shall also be inclusive of all accessories required to make installation complete whether specified or not. CO2 sensors shall be provided with display. CO2 sensors to be integrated with BMS by the Vendors. The Sensor shall be BMS compatible for Modbus RS485 Output.

IAQ TESTING AND MONITORING

INDOOR AIR QUALITY MONITOR

Supply, Installation, Testing & commissioning of IAQ Monitor to measure the levels of PM 2.5, PM10, VOCs, CO2, Temperature, Humidity on a real time basis. The IAQ Monitor shall be RS485 enabled and should be capable of getting connected with Wi-Fi. Units should have dedicated data browse i.e. sim card etc. The Monitor should be capable of sending the indoor air quality information on display Screen/Mobile/Workstation as per Client's requirement. The Monitor should indicate the quality of air through changing the colours as per the NAAQS standards and should meet the WELL building standards. Quoted price shall be inclusive of all necessary arrangement as required to make the unit proper functional. (LED Screen not included.) IAQ Monitor shall be BMS Compatible.

INDOOR AIR QUALITY TEST

Carrying out detailed outside Indoor air test (as per IAQ standard) for the occupied spaces. The following parameters (but not limited to) shall be tested - Temperature, Relative Humidity, Total Bacterial Count, Total Fungal Count, Respirable suspended particulate matter PM10, Respirable suspended particulate matter PM2.5, Carbon Dioxide, Carbon Monoxide, Total volatile organic compounds, Formaldehyde, Ozone, Sulphur Dioxide, Nitrogen Dioxide, Ammonia, Hydrogen Sulfide. Vendor to furnish a quality report showing results/concentration of all paramters before and after running the TFA Units & REME cells. Both results noted needs to be compared with IAQ Standard limits. IAQ parameters should not exceed the standards after ruuning the purifier Equipments.

1 Sample to be taken for Outdoor Air. Indoor air samples to be taken on locations as specified by LEED Consultant/Clients/PMCs. All spaces to be considered for Indoor Samples. 1 Lot to be considered for 1 Sample.

Vendor should look into the following before quoting : i. The Indoor Air quality test should be as per IAQ standard. ii. The test should be carried out by qualified technicians and calibrated equipment’s, the Necessary Safety and other compliances should be followed. iii. Test to be carried out at one particular location and conducted on a weekday preferably Monday/ Friday. iv.Test Equipment Filters to be changed for every reading.

Supply, fabrication, Installation and testing of MS ducting for kitchen exhaust contructed out of 1.6mm thick MS sheet using welded joints & MS angle iron flanges in line with good engineering practice. Duct shall be provided with oil trap as required. Duct access panels with Fire Retardant Gaskets in kitchen exhaust ductwork need to be provided for cleaning at every 3m and at all bends and transitions. HVAC Contractor needs to provide openings for sprinkler installation and sealing after sprinkles are provided. Entire ducting shall be applied with minimum two coats of red oxide primer.

Carying out flush out of the premises using Propeller fans installed on frame. Fans to be temporarily installed near Openable windows for carying out the air Flush out. Quoted price shall be inclusive of accessories and nessary arrangments to be made for proper Flush out as per LEED guidelines including frames, temporary ducting or canvass connection etc. 1 Lot is for flushing out entire site once. (NOTE - TO BE CARRIED OUT THROUGH TEMPORARY FANS ONLY)

LNA Infrarprojects Pvt Ltd

JCC INFRAPROJECTS PVT LTD

JCC INFRAPROJECTS PVT LTD

LNA Infrarprojects Pvt Ltd

RISHABH CONSTRUCTIONS PVT. LTD.

LNA Infrarprojects Pvt Ltd

RISHABH CONSTRUCTIONS PVT. LTD.

LNA Infrarprojects Pvt Ltd

JCC INFRAPROJECTS PVT LTD

LNA Infrarprojects Pvt Ltd

RISHABH CONSTRUCTIONS PVT. LTD.

JCC INFRAPROJECTS PVT LTD