PROVN OF INNER FENCING SECURITY LIGHTS AROUND 17 CIB LOC AT NORTHERN POCKET, PROVN OF SHEDS FOR BATHING POINTS AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH (2ND CALL)

Amount

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and directed.

Removing excavated spoil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40 mm graded stone aggregates) as in foundations, fillings and mass concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B1 (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) finished even and fair as in sub base for receiving floor finishes complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.

M&L for preparation of painting of new steel surfaces over 10 cm in width or girth over a coat of primer using red oxide and applying two coats of synthetic enamel paint complete all as specified and directed

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for rendering 10 mm thick in CM (1:3) on fair faces of brick work surfaces finished even and fair with out using extra cement complete all as specified and directed

M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified as directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge).

Excavating over areas, n.exc 1.5 m deep and getting out hard/dense soil complete all as specified and directed

Brickwork with fly ash old sized bricks, straight or curved on plan.exc 6 m mean radius, built in CM (1:6) complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finishing fair even and smooth without using extra cement complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Hardcore using broken stone or boulders of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:3:6 type C2 using 40 mm graded aggregates as in sub base of flooring complete all as specified and directed.

M&L for 100 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in flooring complete all as specified and directed.

M&L for 75 mm thick Cement concrete type B-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and directed.

Excavating over areas, n.exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc or for shafts n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed

M&L for PCC (1:2:4) 75 mm thick Type C2 (using 40 mm graded stone aggregate) used as in flooring finished even and smooth without using extra cement complete all as specified and directed.

Framed work as in doors or gates of angle Fe 410-W (Gde-E- 250) quality-A Fe or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Preparation of steel surfaces of any description, priming with red oxide primer and painting with synthetic enamel paint n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for brickwork with modular fly ash bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and directed.

Preparing new surfaces of walls plastered and white washing with three coats of white wash on walls complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles , including necessary form work finishing even and smooth without using extra cement complete all as specified and directed.

Supply & laying sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness complete all as specified and directed. (Note :- Only punned down sand shall be measured).

M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

M&L for laying or passing through pipe LT UG XLPE insulated, armoured heavy duty 1100 volts grade with aluminium stranded conductor of cross sectional area 25 sqmm 4 core complete all as specified and directed. (Make: HAVELLS/KEI/Polycab)

Supply and laying 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and directed. (Make: TATA/JINDAL/ITC)

S&F GI Bracket of dia 40 mm light grade with 1.2 mtr length including clamps and nut bolts for fixing of bracket all as specified and directed.

M&L for wiring for circuit / submain wiring alongwith earth wire in PVC conduit (covering the complete wiring from bottom to top with FR PVC insulated copper conductor, 2 x 1.5 Sqmm + 1 x 1.5 Sqmm single core (or 3 core 1.5 Sqmm copper conductor) in surface complete including necessary MS clamps complete all as specified and directed by Engr-in Charge

S&F junction box made of polycarbonate with IP 65 degree of protection , dust proof, water tight, light weight, acid resistant, corrosion proof insulated & shock proof, fire retardant, self extinguishing, halogen & silica free non-toxic material, UV resistant, with internally embedded gasket fitted with required connector/terminals for upto size 25 sqmm 4 core cable and hinged from Top and openable from down side and cable entry from sides or down including Glands and 10A SP MCB mounted on DIN rail for Street light connection complete all as specified and directed. (Note: The rate includes for MS clamp and nut and bolts for holding the junction box) (Make:- Sintex (Min Size 205 x 255 x 112) or equivalent make of Hensel/Spielberg).

S&F LED street light fittings 60 watt 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F street light timer panel suitable for 415 Volts,3 Phase,4 wire 50,Hz supply system made of 3.15mm CRCA sheet with canopy with 7 tank process duly powder coated complete in all respect fitted with following:- (i) 63 Amps contractor-01 No (ii) Time switch-01 No (iii) MCB TPN 63 Amps-01 Nos, along with complete wiring of the panel all as specified and directed

M&L for drilling hole horizontally under road (min 1 mtr) pavement hardstanding by trenchless technology using ultra sound technique and necessary machine suitable and including 150 mm dia HDPE pipe complete all as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation for stay set /Pole/ FPB etc including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (with using 20 mm graded stone aggregate) as coping of pole/panel including necessary form work as required complete all as specified and directed

M&L for steel tubular swaged poles complete with cast iron/MS base plate, finial taper plug , bolts, nuts & screws as specified type 410 SP-31, 9 meter long complete all as specified and directed by Engr-in-charge

M&L for two coat of aluminium paint after preparation of new surface of Steel/Iron electric poles including pole fittings with two coat of Aluminium paint such as cross arms of any description anti climbing devices nut bolts etc and cement based paint of PCC coping and painting 05 Nos of strips of each 30cm height of Yellow & Black synthetic enamel paint alternatively above coping including numbering of poles complete all as specified and directed.

M&L for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron wire of 4 sqmm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, Chequered plate cover plate of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar, funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SRR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete all as specified and directed. (Note : (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submitted to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).

UNITED BUILDERS

UNIQUE ENTERPRISE

M/S Ali Trading Co