8545E8REPAIRS TO ROOF FLOORING JOINERY PLASTERING PLUMBING SANITARY FITTINGS AND MISC WORKS AT IMH AREA OFFRS MD ACCN MES CIV MD ACCN 54 CIVILIAN QTRS CWE GE COMPLEX UNDER AGE BR EAST UNDER GE M AF JALAHALLI BANGALORE

Amount

Demolition of cement concrete (unreinforced) as in ground floors and paving's not exc. 15cm thickness (below or above ground level) complete all as specified.

Material and labour for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finishing the surface even and smooth without using extra cement all as specified.

Material and labour for PCC 100mm thick 1:2:4 type B-2 using 40mm graded stone aggregate finished even and smooth without using extra cement and all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 as plinth protection/sub base etc and all as specified and directed.

Supply only 38mm wide, 3mm thick glass dividing strips to conform to design complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Material and labour for Ist quality Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles complete all as specified.

Material and labour for Ist quality Glazed ceramic coloured tiles of size 300x200mm x7 mm thick in vertical surface, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles laid over bedding layer complete all as specified.

Material and labour for Ist quality 10mm thick coloured light shade joint free vitrified tiles (square /rectangular) polished area of each tiles n.exc 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

Material and labour for 15mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor finishes complete all as specified.

Material and labour for Rendering 10mm thick cement plaster in cement mortar (1:4) for laying the tiles as in skirting/ dados/vertical surface complete all as specified.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floor to receive tiles complete all as specified and directed.

Supply and fixing chequered cement concrete tiles 30cmx30cmx25mm thick set jointed and pointed with grey cement and pigment to match the floor all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver blocks of 60mm thick (M-35 grade) as in flooring of any shape and size(laid in pattern as decided by GE) and filling the joints with fine sand and all as specified and directed.

Material and labour for 50mm thick sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 Using 12.5mm graded crushed stone aggregate as in coping, benching in floor complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified.

Material and labour for rendering 15mm thick in CM 1:6 on concrete/brick surfaces (internal) finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 15mm thick in CM 1:4 on concrete/brick surfaces (internal) finished even and smooth without using extra cement complete all as specified.

Material and labour Rendering 5mm thick in CM (1:3) on ceiling on fair faces of brick work or concrete surfaces & finished even and smooth without using extra cement complete all as specified.

Material and labour Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer over one coat of JK Birla wall care putty all as specified.

Material and labour Three coats of white wash on new surfaces of walls including preparation of surfaces complete all as specified.

Material and labour forprepration of new plastered surfaces applying two coats of cement base paint and all as specified and directed.

Material and labour Three coats of white wash on ceiling including preparation of newly plastered or un-plastered surfaces complete all as specified.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6.00 mean radius built in CM 1:6 and all as specified and directed.

Material and labour for Pre-Cast PCC 1:3:6 type C-1 (20mm graded agg) cement concrete block masonry with solid blocks exc 10cm in width and set in CM 1:6 and all as specified and directed.

Taking down up or down 15mm bore steel tubing galvanized and connection including cleaning for re-fixing or removal from site complete all as specified.

All as per Srl item No 30.00 above but 20mm bore.

Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified.

All as per Srl item No 33.00 above but 20mm bore.

Cutting chases, pinning in making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth.

Supply and fixing in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply and fixing in repair 15mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) screwed for iron pipe of 15mm bore .

Supply and fixing in repairs 20mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe and all as specified and directed.

Supply and fixing in repair Bib tap cast copper alloy suitable for 15mm bore pipe with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule all as specified

Supply and fixing in repair15 mm dia pillar taps, cast copper alloy, with capstain heads, chromium plated screwed down high pressure, with or without lettered "Hot" or cold with long screwed shanks and fly nuts screwed for iron pipes and fixed and all as specified and directed as specified and directed.

Supply and fixing in repair push button taps of cast copper alloy, screwed for 15mm dia pipe and all as specified and directed

Supply and fixing in repair swivel shower of PTMT any colour for fixing with 15mm pipe minimum weight 40gms and all as specified and directed.

Supply and fixing in repairs WHB vitreous white chinaware of 550 x 400mm size including CI/MS brackets, 45cm long PVC connection, PVC waste pipe of suitable size/length and 15mm dia CP pillar tap as in repair complete all as specified

Supply and fixing in repairs Vitreous china squatting pan "Orissa pattern" size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding and making good to floor as in repairs all as specified.

Supply and fixing in repairs china wash down water closet (pedestal pattern) EWC white incl plastic water closet seat cover and mild steel chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim and all as specified and directed.

Supply and fixing in repair vitreous china urinal bowl type of flat back, size of 465x355x265mm, white with grating & unions for discharge pipe complete including provide and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in fixing automatic flushing cistern with brackets, flush pipe, grating and unions for discharge pipe and complete all as specified and directed.

Supply and fixing in repair PVC valve less 10 liters capacity, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes as in repair complete all as specified.

Supply and fixing PVC connection 15mm bore 45 cm long with two PTMT nuts and washers complete all as specified.

Supply and fixing in repair Grating doom 150 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified.

Supply and fixing Sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm as in repair all as specified

Supply and fixing in repair waste coupling 32mm dia of PTMT (half or full thread) minimum weight 45 gram

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB and all as specified and directed.

Supply and fixing in repairs plastic water closet seat cover white or tinted, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinge device and all as specified and directed.

Supply and fixing in repair PVC water tank Cover for 500 ltrs/1000 lits capacity PVC water tank

Supply and fixing in repair tubular towel rail alumunium annidised 20mm dia 'D' type 60cm long between flanges and all as specified and directed.

Dismantling water tanks of capacity exc 250litres and n exc 500 litres complete all as specified.

Dismantling water tanks of capacity exc 500 litres and n exc 1000 litres complete all as specified.

Dismantling water tanks of capacity exc 1000 litres and n exc 2000 litres complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tank double layer of capacity 500 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position with and including brass float valve 20mm dia complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tank double layer of capacity 1000 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position with and including brass float valve 20mm dia complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tank double layer of capacity 2000 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position with and including brass float valve 20mm dia complete all as specified.

Demolition and brecking up 100/75mm dia drain pipes (Salt glazed ware, AC, PVC or cement) set in cement mortar all as specified and directed.

Supply and fixing 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

Supply and fixing 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

Supply and fixing PVC (SWR) bends 75mm bore any radius all as specified & directed.

Supply and fixing PVC (SWR) bends 110 mm bore any radius all as specified & directed.

Supply and fixing in repair 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement and all as specified and directed .

Taking down chowkhats exc 1.50 sqm and n.exc 4.00 sqm without taking off shutter each and all as specified and directed.

Taking down chowkhats n.exc 1.50 sqm without taking off shutter each and all as specified and directed.

Taking down shutter of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1.00 sqm each complete all as specified and directed.

Material and labour for 2nd class hard wood plain, solid straight chowkhats and frames wrought framed rebated on the solid , rounded or chamfered, put together with glue pinned at joints and all as specified and directed.

Supply and fixing 2nd class hardwood 35mm thick paneled shutter, panels inserted of 12mm ply board or veneered particle board. The size of rails and stile as per IS : 1003 (Part I).

Supply and fixing 35mm thick IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, section 8, clause 8.24(a) complete all as specified.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified.

Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified.

Supply and fixing MS hold fast or small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Material and labou rPCC 1:3:6 type C-1 using (20mm graded stone aggregate ) as in hold fadst

Easing of door shutter/window shutter of any size for smooth opening, tightening of hinges, adjustment of tower bolt, sliding bolt etc complete all as specified.

Supply and fixing 100mm size butt hinges, medium weight cold rolled mild steel mild steel medium weight

Supply and fixing 75mm size butt hinges, medium weight cold rolled mild steel mild steel medium weight

Aluminium anodised barrel tower bolt of extruded section 100mm long all as specified.

Ditto item No 82 but 75mm long

Supply and fixing in 150mm size aluminum handles cast type anodized and all as specified and directed.

Ditto item No 85 but 75mm long

Supply and fixing 300mm size aluminum alloy anodized sliding door bolt with hasp stable (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and all as specified and directed

Supply and fixing and In repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Material and labour for Preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel painting over and incl one coat of pink primer

Material and labour Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each of 2nd class hard wood complete all as specified.

Hacking out old broken glass panes of any thickness description from wooden or steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads & prepared to receive new glass panes complete all as specified.

Supply and fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm each panes complete all as specified.

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing in repair mild steel powder coated pelmet rods 20mm dia including 02 Nos of brackets , 02 Nos of finials or side brackets as per site requirement and 10 No of curtain rings each curtain rod complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description all as specified and directed.

Supply and fixing MS tubes/Square bars/Angle squqre bar iron using various sections such as poles, rafters, purlins ladders and cleats as directed by Engineer-in-Charge and all specified and directed.

Material and labour for preparation of new steel surface and iron work of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide and all as specified and directed .

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings and all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scaffoldings of any height complete all as specified and directed.

Material and labour for preparation of old surface of wall including scrapping down. Smoke soot, efflorescence salts trading oil and gressy spots etc by applying one coat of whitewash and all as specifed and directed.

Preparing old decorated surface of walls and applying one coat of cement base paint complete all as specified.

Complete removal of existing treatment on walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots filling holes, cracks with cement base lime putty and applying two coats of oil bound distemper over a coat of primer and layer of wall care putty complete all as specified and directed.

Material and labour for One coat of white wash on old decorated ceiling surfaces including preparation of surfaces complete all as specified.

Material and labour for Preparation of old painted wood and wood based surface of any description, not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

Material and labour for Preparation of old painted steel and iron based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar of any hieght including scafolding complete all as specified and directed.

Material and labour for roof tiles , Mangalore Pattern,interlocking at side joints, laid dry including scafoldings of any hieght complete all as specified and directed.

Fixing only roof tiles , Mangalore Pattern,interlocking at side joints, laid dry including scafoldings of any hieght complete all as specified and directed.

Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles,bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Dismantling roof battens of any description in any position complete all as specified and directed.

Material and labour second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any hieght complete all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any hieght complete all as specified and directed.

Cleaning and removing with bleaching powder to all scale, sludge, mud, algae and dirt etc from tanks capacity up to and including 500 litres an from mouths of circulating pipes etc and washing with clean water including writing in words with synthetic enamel paint as CLEANED ON (date) all as directed by Engr-in-Charge.

shashi shekar construction

Sri Maruthi Builders

docileworx

chowdeshwariconstructionco

SRI LAKSHMI VENKATESHWARA ENTERPRISES

SHREE BANASHANKARI ASSOCIATES

LAKSHMI CONSTRUCTIONS

BYRAVESHWARA CONSTUCTION