SMART PERIODICAL TO MD ACCN UNDER AGE BR II OF GE S MAMUN

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M & L one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M & L water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

M&L cement plastering 12 mm thick in cement mortar 1:4 including mixing liquid WPC of approved manufacturer as per manufacturers instruction @ 0.200 ltr in 50 Kg of cement on brick work or concrete surfaces or in chajjas/parapet walls etc, surfaces finished even and smooth without using extra cement including taking down of existing plaster of any description complete all as specified and directed Note: WPC will be measured and paid separately.

M&L 10mm thick rendering or plastering work in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, using WPC liquid including taking out peeled off plaster / concrete if required and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.

Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1:3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3, complete all as specified and directed.

M&L for cleaning, breaking, loose concrete, changing / replacing corroded reinforcement and filling plain cement concrete 1:1½ :3 type B0 (using 12.5mm graded aggregate) at places like chajja, sun shades, roof projection, fascia, etc., complete all as specified & directed. Note :- Reinforcement shall be measured and paid seperately.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply only liquid water proofing compound of appproved make complete all as specified & directed.