SPECIAL REPAIRS TO BLDG NO. T-974, T-975, T-878, T-879, T-435 AND PROVNOF CERTAIN REV AND MINOR WORKS AT LEIMAKHONG

Amount

B/R work

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out of hard/dense soil complete all as specified and as directed.

ditto item no. 4.00 but for each additional 1.5m or part thereof in depth beyond the first 1.5m

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for PCC M-15 grade (Nominal mix) using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for Precast PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in cover slab, set in cement mortar (1:6) complete all as specified and as directed.

M & L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in coping including necessary formwork complete all as specified and as directed.

Supply only intergral water proofing compound.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks old size (locally available best quality) in one brick thick honey comb walling, built in cement mortar (1:4) complete all as specified and directed.

M&L for 40mm thick PCC M-15 grade (Nominal mix) using 12.5mm graded crushed stone aggregate as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed

Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed

Use and waste for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, flat, .rough finished surface of concrete complete all as specified and directed

M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and removing all unserviceable materials from site complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed.

S&F for 30mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed.

S&F 125mm long alumiunium handles cast type anodised complete all as specified and directed.

S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width or aperture 1.40mm complete all as specified and directed.

S&F in repairs curtain rod 25 mm dia decorative brass heavy grade complete all as specified.

S & F in repair decorative brass curtain rod brackets fixed to wall with cadmium plated brass screws and plastic cleats complete all as specified and directed.

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

S&F Structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.

S&F Structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.

M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws complete all as specified and directed

M & L for 6mm thick plywood (no of ply 05), grade BWR, type BB, fixed with nails to timber frame work in walls complete all as specified and directed.

S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.

M&L 100mm thick PCC M-7.5 grade (Nominal Mix) using 40mm graded crushed stone aggregate in sub base, finishes even and rough complete all as specified and directed.

M&L 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate in sub base, finishes even and rough complete all as specified and directed.

M&L 40mm thick PCC M-10 grade (Nominal Mix) using 20mm graded crushed stone aggregate in sub base, finishes even and rough complete all as specified and directed.

M&L 75mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in hard standing, finishes even and smooth without using extra cement complete all as specified and directed.

M&L 50mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in floor, finishes even and rough to receive floor tiles complete all as specified and directed.

M&L 25mm thick PCC M-15 grade (Nominal Mix) using 12.5mm graded crushed stone aggregate in floor, finishes even and rough to receive floor tiles complete all as specified and directed.

M&L 50mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in floor, finished even and smooth using extra cement complete all as specified and directed.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for precast chequered cement concrete tiles 30cm x 30cm x 25mm thick conforming to IS 13801-1993, set, jointed in neat cement slurry and pointed with grey cement and pigment as in floors complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in cement mortar (1:4) complete all as specified and directed.

S&F Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in cement mortar (1:4) complete all as specified and directed.

M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work in cement mortar 1:3 using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. WPC will be measured and paid separately)

M&L rendering 15mm thick on other than fair faces of brick work in cement mortar1:3 using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. WPC will be measured and paid separately)

M&L rendering 15mm thick on fair faces of brick work in cement mortar 1:4 using water proofing compound @2% by weight of cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. WPC will be measured and paid separately)

M & L for rendering 10mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M & L for rendering 15mm thick plaster in cement mortar (1:4) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed.

M & L for 20mm thick screed bed or bedding layer in cement mortar (1:3) for laying kota stone complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F figured glass 3mm thick, pin headed type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic (red) roof paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for prepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Ditto all as per Sl item No. 93.00 here-in-above but except material ( Note: Serviceable GI tubings obtained from dismantling under Sl item No 92.00 here-in-before shall be reused under the item)

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

S&F in repairs vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S & F vitreous China wash basin, white, flat back, size 630x450mm including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.

S&F PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.

S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.

S&F stop valves ISI marked cast copper alloy, chromium plated, fancy type, screwed down high pressure , screwed both ends for iron pipe or unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F in repairs stop valves ISI marked cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure screwed both ends for iron pipe or unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F angle valve ISI marked cast copper alloy, chromium plated, fancy type, screwed down high pressure screwed both ends for iron pipe or unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F in repairs angle valve ISI marked cast copper alloy, chromium plated, fancy type, screwed down high pressure screwed both ends for iron pipe or unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed.

S & F bore bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed.

S & F in repairs bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed.

S & F bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 20 mm bore dia of pipe complete all as specified and directed.

S&F gun metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe for 15 mm bore dia of pipe and fixed complete all as specified and directed.

S&F gun metal, globe or gate valves, ISI marked with iron wheel head, screwed both ends for iron pipe for 20 mm bore dia of pipe and fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank ISI marked1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.

S&F brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.

S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.

S&F soap dish, vitreous China white, approximate size (160x 160x90)mm complete all as specified and directed.

S&F in repairs 125mm dia chromium plated (ABS body) shower rose with or without swivel joints complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors as in waste/soil pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors as in waste/soil pipe complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends (with access door) complete all as specified and directed.

S&F 63mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.

S&F 110/110mm bore PVC (SWR) P trap complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required, internal dia of pipe 100mm complete all as specified and directed.

M&L for PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in concrete bed to 75mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in concrete bed to 110mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and removing unserviceable materials from site of work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

E/M work

Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed)

One light/fan point controlled by one, one way switch

One socket outlet 5 Amps 5 pin on independent board

One socket outlet 5 Amps 5 pin on same board with other switches

All as per item No. 145 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.

S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.

S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.

S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.

S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.

S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F modular white cover with frame for fixing of 2 module.

S&F modular white cover with frame for fixing of 4 module.

S&F modular white cover with frame for fixing of 12 module.

S&F blank spacer plate for single module.

S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed.

Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.

S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed. (Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter)

S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed. (Make: Havells cat part No. DHDPSHODRW 04 or as per list approved makes enclosed hereinafter)

S&F MCB single pole and neutral 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.

Taking down old unserviceable light fitting of any type and in any situation complete all as directed.

S&F universal batten for G13 T8 lamps (LED TUBE),1200mm long complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Havells Regal Batten Cat No.REGALBATTENT8UPTO1X22WSSBSWH or equivalent in Philips/ Bajaj/ Crompton)

S&F ultra bright LED polycarbonate tublight 20W, 1213mm long with very high efficacy suited for installation T8 tublight with G13 lamp holders, complete with all accessories complete all as specified and directed. (Make: Photon Ultra LED tublight Havells Cat No.PHOTONULTRA1213T8SSTL20WLED865SPCor equivalent in Philips/Bajaj/CG)

M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one 10W LED complete all as specified and directed.

S&F wall mounted decorative light fixture made up of polycarbonate suitable for and including 10W CFL/LED lamp complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Philips Nova B22/1X10W LED/ Havells/Bajaj/CG)

S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 20 watt including suitable size of wall bracket and connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Havells Endura Pearl Cat No. ENDURAPEARLSL20WLED757SASYTOPC or equivalent in Bajaj/Philips/Crompton)

Taking down old unserviceable service cable including batten/suspending wires complete all as directed.

S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as directed.

Taking down ceiling/exhaust fan including dismantling all necessary electrical connections to facilitate repairs to ceiling/wall complete all as directed.

Hanging only/ Refixing ceiling/exhaust fan removed under item Srl No 171 above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed.

M/S BIJOYA LAXMI ENTERPRISE

RK Enterprises

M/S PRADEEP CONSTRUCTION

SHARMA ENTERPRISE

MAURYA CONSTRUCTIONS

M/S N JADUMANI SINGH