REPAIR TO AC SHEET, CGI SHEET ,VALLY GUTTER, PLUMBING, AND MISC BR REPAIR WORKS RESTRICTED UN RESTRICTED AREA AT AGE BR II UNDER GE PANAGARH

Amount

Dismantling of wall or ceilling board of any thickness complete all as specified and directed.

S&F 605mmx605mm Anodised aluminium snap grid frame work for false ceillingwith all necessary aluminium angle & Tee arrangement with and incl fixing cleats screw etc complete all as specified and directed.

S&F hanger 6mm dia G.I (up to 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

S&F 4mm thick 'E' board (non asbestos fiber) plain building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the permises complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and directed.

M&L Non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.06Sq.m but not exceeding 0.11 Sq.m, in floors set and jointed with grey cement slurry & pointed with grout of matching shade over and incl screed bed or bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and directed.

M&L Glazed ceramic colour tiles of size 300x200x 6 to 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement over and incl backing coat of 10mm thick in cement mortar (1:4) for fixing of tiles complete all as specified and as directed .

Demolition of Plain cement concrete below or above ground level n.exc 15 cm thickness and removal of soil to outside MD land complete all as specified and directed.

M & L for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed and as per manufacturer instructions and direction.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.

M&L for sand cushion filling for floor,paver block, foundation etc including watering and consolidation complete all as specified and directed.

M&L PCC 100mm thick, 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for hardcore of brocken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick, 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection without using extra cement complete all as specified and directed.

Dismantling Brick work and removing and rubbish off the premises (outside MD land) complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6m mean radius,built in cement mortar (1:4) all as specified old size bricks complete all as specified and directed.

M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:4) complete all as specified and directed.

M&L for half brick with fly ash bricks straight or curved on plan exc 6m mean radius,built in cement mortar (1:4) all as specified old size bricks complete all as specified and directed.

M&L for 15mm thick rendering in brick work in cement & sand mortar (1:4) in fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) in copping,cills steps and similar works complete all as specified and directed.

M&L for 6mm thick asbestos cement,corrugated sheet in roof fixed with coach screw incl dismantling of old AC sheet comlpete all as specified and directed.

S&F mild steel flats iron 50x5mm thick as wind tie over mild steel sheeting roof and fastening/lacing complete all as specified and directed.

Dismantling plain or corrugated steel sheet or galvanised sheet in roof any gauge, any thickness complete all as specified and directed.

M&L galvanised corrugated mild steel sheeting 0.63mm thickness with two corrugations side laps fixed with L-type or J-type or cracked hooks bolts in liue of screws with grade of zinc coating 275 complete all as specified and directed.

All as per item No 25.00 mentioned here-in-above but except sheeting complete all as specified and directed.

M&L two coat of synthtic enamal paint on steel surface of any description oyer 10cm in width or grith, over one coat of red oxide complete all as specified and directed.

M&L plain galvanised mild steel sheeting 1.00mm thickness inrigds, hips, vally gutter ,drip and straight flashing (length and grith as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F rolled mild steel angle iorn or tee section Fe 410W (grade250) framed work as in roof covering ,trusses ,purlin ,rails and fasterning and heave bracket frame in (beam,tee,angle, channel of flat section including distence pieces, cleats etc incl cutting to dead length where reqired ,notching, drilling, fitting,riviting and or wellding or connecting with bolts and nuts (including rivits or bolts and nuts)and fixing complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for washing rubbing down and stopping of old distampered and painted wall surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

Taking down CI/rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc., including cleaning etc fixed to walls complete all as specified and directed.

S&F CI/Soil waste pipe 100mm dia sand cast iron any length with or without ears with cement joint complete all as specified and directed.

All as per item No 33.00 mentioned here-in- above but 75mm dia complete all as specified and directed.

S&F CI bend 75 mm dia complete all as specified and directed.

S&F CI bend/branch pieces single 100mm dia complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards complete all as specified and directed.

M&L block board, grade 2 quality 18mm thick interior grade ,decorative type with decorative face veneer on one face complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

taking down chowkat or frame not exc 1.5sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats exc 1.5sqm and n.exc 4 sqm each with shutters (without taking off shutters from the chowkats or frames) complete all as specified and directed.

S&F Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and directed.

S&F extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and directed.

S&F Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and directed.

S&F butt hinges medium weight of size 100mm all as specified and directed.

S&F butt hinges medium weight of size 75mm all as specified and directed.

S&F aluminium alloy butt hinges of size 100mm all as specified and directed.

S & F inrepair hydraulic door closer aluminium extruded section body desiganation No-3 universal type ,suitable door shutter width and waight between 61kg to 80kg of approved make, fixed with screws, complete all as specified and directed.

S&F in repair aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed.

M&L as in repair double leg aluminium anodised door stopper with rubber foot of 150mm length, ISI marked and fixed with standard aluminium screws complete all as specified and directed.

Cutting holes in brick wall exc half brick but not exc one brick for inserting hold fast and macking good dismantled portion in cement mortar (1:4) or cement concrete (1:2:4) type B-I built in cement mortar complete all as specified and directed.

S&F hold fasts inserted brick wall complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkat and frame wrought ,framed rebated on solid rounded or chamfered put toghter with glue pinned at joints complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for windows and ventilator complete all as specified and directed.

S&F 35mm thick 2nd class hard wood panelled framed shutter of (any number of panels) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

M&L solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC foam sheet meter cut to two corner and jointed with 2 nos of 1500mm long bracket of 15x15 squre tube .the two vertical door profile are to be reinforced with 19x19mm squre tube of 19 gauge EPDM rubber gascut weather seal to be provided through out the frame frame shall be fixed to wall using 65x100mm long ms screw through the frame by using PVC fasterner (inc hold fast)and minium of 4 nos of screw to be provided for each vertical member & 2 nos for horzintal all complete all as specified and directed.

S&F factory made solid PVC door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVCsheet on back face and plain colour PVC 'c' chanel having PV C sheet for top rail ,lock rail & bottom rail panneling, supply and fixing in the frame at site complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinted tack ,or galvanised wire staple or beading complete all as specified and directed.

S&F 15mm bore Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down complete all as specified and directed.

S&F in repair PVC low level flushing cistern including brackets 10 litre capacity, with inlet ball valve float, handle,flush pipe etc complete all as specified and directed.

S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm dia PVC connection 450mm long of approved make fancy type as specified and directed.

S&F in repair 15mm dia stop valve,/anglevalve cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed complete all as specified and directed.

M&L for 15 mm bore GI tubing, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing complete all as specified and directed.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed.

S&F in repair Stainless steel towel rail 20mm dia D type solid 60cm long between flanges of approved make and pattern, fixed to walls with screws complete all as specified and directed.

S&F in repairs Aluminium curtain rod 20mm dia fixed including wooden brackets complete complete all as specified and directed.

S&F in repair vitreous chaina squating pan orissa parten size 580x 440mm white with integral foot rest (excluding flushing cisten and flush pipe) complete all as specified and directed.

S &F in repair vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc (excluding cost of flush tank) complete all as specified and directed.

THE ASSOCIATED COMPANY

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

NATIONAL CONSTRUCTION CO

UNITED BUILDERS

UNIQUE ENTERPRISE

subash chander bahl

rahul enterprise