Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC JAJJAR KOTLI JAMMU J K 151222 | JAMMU | JAMMU | J K | 151222 | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.4 L+₹1.6 L (8.61%)Rejected-Finance 110 245 NEHRU NAGAR KANPUR UTTAR PRADESH 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | L2 | Rejected-Finance Other than L1 |
Tender Value
₹23.5 L
EMD Value
₹47,000
Closing Date
11 Jun 2020, 6:00 pmClosed
GE UTILITIES
GE UTILITIES UDHAMPUR PO GARHI PIN 182121 UDHAMPUR
Repair/Replacement of CI/DI/MS/GI pipelines of various sizes, sluice valves, NRV, ARV, Centrifugal pump sets, electric motor, motor starter, LT panels and allied system installed at Distribution area under GE Utilities Udhampur
2020_MES_344752_1
GE/U-05/2020-21
Open Tender
Pipes and Pipe related activities
Item Rate
270 days
UDHAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE UTILITIES UDHAMPUR
₹47,000
Yes
22 Jul 2020
14 May 2020
13 Jun 2020
14 May 2020
11 Jun 2020
28 May 2020
Amount
Decoupling, disconnecting suction line and discharge line taking down from foundation bolts, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 60/75 HP complete all as specified and directed by Engr-in-Charge. Note: - (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A.
Description all as per serial item No 1.00 here-in-before but capacity 30/40/50HP.
Description all as per serial item No 1.00 here-in-before but capacity 25/20/15/12/10HP.
Description all as per serial item No 1.00 here-in-before but capacity 7.5/5HP/3HP
S&F Pump impeller made out of Bronze for single/double/multistage pumps of capacity 60/75 HP as per manufacturer's composition of existing make of pump all as specified and directed by Engr-in-Charge. Make: Kirloskar/Wilo Mather Platt or equivalent make as approved by GE.
Description all as per serial item No 5.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 5.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 5.00 here-in-before but Gland cup with nuts and bolts.
Description all as per serial item No 5.00 here-in-before but Shaft sleeves.
Description all as per serial item No 5.00 here-in-before but Bearing housing.
S&F Pump impeller made out of Bronze for single/double/multistage pump of capacity 30/40/50HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Wilo Mather Platt or equivalent make as approved by GE.
Description all as per serial item No 11.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 11.00 here-in-before but Shaft sleeves.
Description all as per serial item No 11.00 here-in-before but Casing bearing.
Description all as per serial item No 11.00 here-in-before but Bearing housing.
Description all as per serial item No 11.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 11.00 here-in-before but Gland cup with nut and bolts.
S&F Pump impeller made out of Bronze for single/double stage pump of capacity 25/20/15/12/10HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Wilo Mather Platt or equivalent make as approved by GE.
Description all as per serial item No 18.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 18.00 here-in-before but Shaft sleeves.
Description all as per serial item No 18.00 here-in-before but Casing bearing.
Description all as per serial item No 18.00 here-in-before but Bearing housing.
Description all as per serial item No 18.00 here-in-before but Tyre coupling/star coupling
Description all as per serial item No 18.00 here-in-before but Gland cup with nut and bolts.
S&F Pump impeller made out of Bronze for single/double stage pump of capacity 7.5/5HP/3HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Wilo Mather Platt or equivalent make as approved by GE.
Description all as per serial item No 25.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys.
Description all as per serial item No 25.00 here-in-before but Shaft sleeves.
Description all as per serial item No 25.00 here-in-before but Casing bearing.
Description all as per serial item No 25.00 here-in-before but Bearing housing.
Description all as per serial item No 25.00 here-in-before but Tyre coupling/star coupling.
Description all as per serial item No 25.00 here-in-before but Gland cup with nut and bolts.
Disconnecting electric connection of 60/75 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates complete all as specified and directed by Engr-in-Charge.
Note: - Winding of motor stator & rotor shall be measured & paid separately. (a) Rewinding of motor will be measured and paid separately under relevent item (b) The motor shall be squerrel cage induction motor. (c) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (d) Replacement of u/s bearings and grease completely. (e) The contractor shall be arranged a workshop visit of Engr-in-Charge for each job and cutting complete burnt winding of motor in presence of Engr-in-Charge.
Description all as per serial item No 32.00 here-in-before but capacity 30/40/50HP motor
Description all as per serial item No 32.00 here-in-before but capacity of 25/20/15/12/10HP motor
Description all as per serial item No 32.00 here-in-before but capacity of of 7.5/5HP/3HP motor
Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of capacity 100/75/60/50/40/30/25/20/15/12/10/7.5/ 5HP/3HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted. Make: Atlas/Devi Dayal or equivalent make.
S&F in replacement of Pump bearing No. 6307 C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 6308 2RS1/C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 6309 M/C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 6310 M/C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 6311 C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 6312 C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 6014 C4 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 6011 C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 7308 BECBJ including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 6408 C3 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 22312 E including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 3307 ATN9 including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Pump bearing No. 7310 BECBJ including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. 7311 BECBJ including taking down the old existing bearing. Make: SKF/NBC or equivalent make
S&F in replacement of Motor bearing No. NU 304 ECP including taking down the old existing bearing. Make: SKF/NBC or equivalent make
M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 95 sqmm inculding taking down existing old unserviceable cable complete all as specified and directed by Engr-in-Charge. Make: Havells/Polycab/Finolex
S&F in replacement of ON load change over switch 320 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switchcomplete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No IHCNFE0320 or equivalent make as approved by GE.
S&F in replacement of ON load change over switch 250 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No IHCNFE0250 or equivalent make as approved by GE
S&F in replacement of OFF load change over switch 200 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No IHCFFE0200 or equivalent make as approved by GE
S&F in replacement of OFF load change over switch 400 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No IHCFFE0400 or equivalent make as approved by GE
S&F in replacement of load line MCCB 400 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No IHLLSEBF0400 or equivalent make as approved by GE
S&F in replacement of load line MCCB 250 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36 KA,Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No IHLLSEBF0250 or equivalent make as approved by GE
S&F in relpacement of load line MCCB 200 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No. IHLLSEBF0200 or equivalent make as approved by GE
S&F in replacement of load line MCCB 160 Amps 4 pole 415 volts with fixed thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge. Make: Havells Cat part No. IHLFNF0160 or equivalent make as approved by GE
M&L in replacement for copper thimble suitable for 95 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.
Supply and laying, jointing and testing in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 150sqmm 3.5 core laid in trenches,ducts, pipes including taking down the old existing complete all as specified and directed by Engr-in-Charge. Make: Gloster/Polycab/Havells
M&L in replacement for aluminium thimble of 150sqmm size for cables including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 65 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 75 HP as per cat part No IHPASDYF* including taking down the old existing starter complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 50 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 50 HP as per cat part No IHPASDWE* including taking down the old existing starter complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 32 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 30 HP as per cat part No IHPASDQD* including taking down the old existing starter complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 50 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 15 HP as per cat part No IHPASDWE including taking down the old existing complete all as specified and directed by Engr-in-Charge. Make: Havells/Indo Asian/L&T
S&F in replacement of MS stud bolts of existing size with nuts suitable for pumps and motors of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.
S&F in replacement of grouting nuts and bolts of existing size suitable for pumps and motors foundation of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes foundations of poles/stays/pipes etc .not exc 10 Sqm area on plan and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.
Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed by Engr-in-charge.
Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.
Taking up or down GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 73.00 here-in-before but bore of pipe 100mm dia.
Description all as per serial item No 73.00 here-in-before but bore of pipe 80mm dia.
Description all as per serial item No 73.00 here-in-before butbore of pipe 50mm dia.
Description all as per serial item No 73.00 here-in-before but bore of pipe 40mm dia.
Description all as per serial item No 73.00 here-in-before but bore of pipe 25mm dia.
Description all as per serial item No 73.00 here-in-before but bore of pipe 20mm dia.
Description all as per serial item No 73.00 here-in-before but bore of pipe 15mm dia.
S&F only GI pipes in repair of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 81.00 here-in-before but bore of pipe 100mm dia.
Description all as per serial item No 81.00 here-in-before but bore of pipe 80mm dia.
Description all as per serial item No 81.00 here-in-before but bore of pipe 50mm dia.
Description all as per serial item No 81.00 here-in-before but bore of pipe 40mm dia.
Description all as per serial item No 81.00 here-in-before but bore of pipe 25mm dia.
Description all as per serial item No 81.00 here-in-before but bore of pipe 20mm dia.
Description all as per serial item No 81.00 here-in-before but bore of pipe 15mm dia.
S&F cast iron fittings in repair for spigot and socket ends for pressure pipe for water mains such as bends, tapers tee pieces single branch, cross collar, caps and plugs suitable for 200 to 300 mm bore, all specifications as per IS-1538 (Pt-1 to 23)-1976 including taking down the old existing complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 89.00 here-in-before but upto 150mm bore.
Repair to old sluice valve of size 200 mm dia for check nut, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of sluice valve & spindle including fixing & testing complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 91.00 here-in-before but 150mm dia.
Description all as per serial item No 91.00 here-in-before but 100mm dia.
Description all as per serial item No 91.00 here-in-before but 80mm dia.
S&F in replacement Cast Iron sluice valve of size 200 mm dia (PN 1.6) ISI Marked with iron wheel head both end flanged, CI /steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc, including taking down the old existing complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 95.00 here-in-before but 150mm dia.
Description all as per serial item No 95.00 here-in-before but 100mm dia.
Description all as per serial item No 95.00 here-in-before but 80mm dia.
S&F in replacement of Gun-metal, globe or gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Gun-metal, globe or gate valves, 40mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacementof Gun-metal, globe or gate valves, 25mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Gun-metal, globe or gate valves, 20mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Gun-metal, globe or gate valves, 15mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Cast Iron Non return valve suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Cast Iron Non return valve suitable for 100 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Cast Iron Non return valve suitable for 80 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing complete all as specified and directed by Engr-in-Charge.
M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 80 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and any depth complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 107.00 here-in-before but of dia 100 mm bore pipe.
Description all as per serial item No 107.00 here-in-before but of dia 150 mm bore pipe.
Description all as per serial item No 107.00 here-in-before but of dia 200 mm bore pipe.
M&L for repair to fountain having 39 brass nozzles at HQ NC by taking down the fountain complete by unscrewing the nozzles, pipe line, fountain etc removing scales from pipe by acid, painting to the pipes of fountain with two coats of synthetic enamel paint and refixing in same position complete all as specified and directed by Engr-in-Charge.
M&L in replacement of cast iron air release valve with two air outlets of size 100mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washers suitable for 300mm/250mm dia pipe with arrangement for fixing, including taking down complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 112.00 here-in-before but of 80mm dia.
M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing with pre mix bituminuos carpet complete all as specified and directed by Engr-in-Charge.
S&F water proof fountain light of capacity 10 watt having green light output including taking down complete all as specified and directed by Engr-in-Charge.
S&F the nipple brass nozzle as per sample including removal of existing unsv one complete all as specified and directed by Engr-in-Charge.
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 80 mm bore in position providing new lead using good quality spun yarn complete all as specified and directed by Engr-in Charge at any depth, complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 117.00 here-in-before but 100 mm dia.
Description all as per serial item No 117.00 here-in-before but 150mm dia.
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 200mm to 300mm bore in position providing new lead using good quality spun yarn complete all as specified and directed by Engr-in Charge at any depth complete all as specified and directed by Engr-in-Charge.
S&F in replacement of power contactor 3 pole with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1including taking down the old existing power contactor suitable for 75 HP centrifugal pump set complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/IndoAsian
S&F in repair to GI fittings medium grade ISI marked including cutting, screwing etc including taking down complete all as specified and directed by Engr-in-Charge.
Elbow 15mm
Elbow 20mm
Elbow 25mm
Elbow 40mm
Elbow 50mm
Socket 15mm
Socket 20mm
Socket 25mm
Socket 40mm
Socket 50mm
Union 15mm
Union 20mm
Union 25mm
Union 40mm
Union 50mm
Elbow reducer 20 x 15mm
Elbow reducer 25 x 20mm
Elbow reducer 40 x 25mm
Nipple 15 x50mm
Nipple 15 x100mm
Socket reducer 25x20mm
Nipple 20 x50mm
Nipple 20 x100mm
Socket reducer 40x25mm
Nipple 25 x 50mm
Nipple 25 x 100mm
Socket reducer 40x20mm
Nipple 40 x 50mm
Nipple 40 x 100mm
Nipple 50 x 50mm
Nipple 50 x 100mm
Lead wool
Tee 15mm
Tee 20mm
Tee 25mm
Tee 20x15mm
Tee 25x20mm
Tee 40x15mm
Tee 40x20mm
Tee 40x25mm
Dead plug 15mm
Dead plug 20mm
Dead plug 25mm
SHARMA SALES CORPORATION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .