WELCOME MAINTENANCE OF NEW PROJECT, AIR ENCLAVE AT AGE B/R-II UNDER GE (AF) BAMRAULI

Amount

Resecuring or easing & adjusting, without taking down, shutters of any description not exceeding 1 Sqm complete.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete.

S&F in repair aluminium alloy, anodised, sliding door bolt 300 mm long ISI Marked , with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F in repair aluminium anodised barrel tower bolts of ISI Marked extruded section, 200 mm long complete.

S&F in repair aluminium anodised barrel tower bolts of ISI Marked extruded section, 150 mm long complete.

S&F in repair hasp and staple 100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete.

S&F in repair extruded aluminium alloy handles ISI Marked, fabricated type, anodised, 150 mm size complete.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed with rubber beeding complete.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed with rubber beeding complete.

M&L sheet glass ordinary quality3.0 mm thick and glazing with oil putty not exe 0.50 sqm in each pane complete all as specified and directed.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc complete all as specified

M&L (in repair) for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

Taking down existing aluminium windows exc. 1.50 Sqm and not exc. 2.0 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etc complete.

S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

M&L for Tuck welding in repairl not exceeding 2.5cm in length of metal n exc 6mm thick complete.

M&L for Running welding in repairs not exceeding 6mm thick of metal to be welded in existing items etc complete.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete.

S&F flush shutters 30 mm thick, solid core construction, with block board core and polished teak, ply wood face panels, commercial type on both sides complete.

S&F butt hinges, medium weight, cold rolled mild steel, 100mm size complete.

S&F aluminium alloy, anodised, sliding door bolt 250 mm long, ISI Markedwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F Aluminium anodised barrel tower bolts of extruded section, 200 mm long complete.

S&F in repair Mild steel wardrobe hooks 450 - 600 mm length, complete.

S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete.

S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers complete.

S&F 150mm size in repair 7 lever super night latch single bolt, fixed in inside side of door shutter complete all as specified.

S&F 2lever wardrobe lock,verticle type of 50mm in size complete.

S&F in repair 32 mm dia PVC flush pipe for low level flushing cistern to pedestal/squatting pan including all fittings complete.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore, fancy type (minimum weight 105 gms) complete.

S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.

Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle, nippule, washer etc at any size etc complete all as specified and directed.

S&F in repair two way fancy type mixer pillar tap hot and cold, 15mm dia size with Screwed down high pressure,screwed both ends for iron pipe or for unions and fixed complete.

S&F in repair brass chromium plated shower rose 125 mm size with swivel joints, fixed in repairs complete.

S&F in repair jet spray with flexible pipe and holding screw other fittings etc complete.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete.

S&F in repair PVC waste pipe of 32mm dia suitable for WHB/kitchen sink complete all as specifed and directed.

S&F in repair Stainless steel plate rack of size 780x900x250mm fixed in repair complete.

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 500 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store.

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 1000 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc complete.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc complete.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete.

S&F in repair PVC cover (Lid) for OHT of capacity 500 Ltr complete.

S&F in repair PVC cover (Lid) for OHT of capacity 1000 Ltr complete.

Labour only opening of air lock in toilets/ bath and kitchen of GI pipe of any dia but excluding fittings complete.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete.

S&F Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps complete.

S&F in repair Tubular towel rail 20mm dia, 600mm long of brass, chromium plated complete.

S&F in repair towel ring 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm complete.

S&F in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, (excluding flushing cistern & flush pipe fixed including connection to trap and to flushing pipe,anti sphonage pipe etc.) making good the disturbed surfaces and to match with existing surface and taking out the existing pan complete.

S&F (in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

S&F (in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.

S&F (in Repair) vitreous china wash hand basin, white, flat back, size 580 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets complete.

S&F in repair mild steel angle iron bracket with 25x25x3mm angle iron for WHB including refixing of WHB, steel painting and making good disturbed surface complete.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.

Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. Complete.

S&F in Repairs PVC Syphon kit suitable for PVC Cistern complete

Resecurring of syphon kit by minor adjustment and replaceemnt of syphon washer etc. Complete.

S&F in repair 32mm bore waste fittings of brass CP for glazed ware sinks,basin etc with long screwed shanks , and fly nut flange end bedded in red lead cement and other end fixed complete.

S&F in repairs three way wall mixer with provision of over head shower with L bends connecting legs & wall flanges incl nipples complete

Repair only to wall mixer of any make by replacing L-bends & connecting legs, nipples etc complete

S&F (in repairs) Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete.

M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over & including alkali-resistant cement primer Using Mechanical means complete.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash Using Mechanical means complete.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted including a coat of cement wash with white cement Using Mechanical means complete.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including one 2mm thick wall care putty Using Mechanical means complete.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted Using Mechanical means complete.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling and applying one coat of distamper oil emulsion Using Mechanical means complete.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete.

Demolition of brickwork built in cement or cement lime mortar complete.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.

Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off the premises.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with Grey cement and pigment including laiying over 30mm sand cousion complete all as specified and directed.

All as per item No 92 above but except interlocking tiles complete.

M&L for Granite/marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches. complete.

M&L for Non Skid ceramic tiles coloured 300mmx300mmx 8 to 10 mm thick (square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete.

M&L for Non Skid ceramic tiles coloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete.

M&L for Non Skid ceramic tiles coloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)

M&L for double charged Vitrified Ceramic coloured tiles of size of tiles exc .36 Sqm But Not Exc .42 Sqm in each tiles (square/ rectagular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

All as per Item No 99 above but as in skirting set & jointed in neat slurry and pointed in white or colour cement to match the shade tile including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc complete all as specified.

M&L for filling white cement on floor/wall tiles joints including removing old fillings etc complete.

Demolition of concrete of any description and in any position complete.

M&L for PCC 1:2:4 using 20mm graded aggregate as in PCC benching at junction of tiles , parapets and filling hollow section of pressed steel of suitable size complete.

Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. Complete.

S&F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.

S&F in repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.

S&F in repair 110mm PVC (SWR) bends of any radius complete.

S&F in repair 75mm PVC (SWR) bends of any radius complete.

S&F in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete.

S&F in repair 110mm PVC (SWR) vent cowl complete.

S&F in repair 75mm PVC (SWR) vent cowl complete.

S&F rubber bead in all types of windows/ Ventilator in any gap/joint etc complete.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F in repair 15 mm fancy type stop/angle valves, castcopper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed all as specified and directed

M&L for taking down cement plaster on brick work or concrete surfaces incl racking out joints, hacking for key scrubbing down with water etc and rendering 10 mm thick in ready mix cement plaster 1: 4 on fair faces of brick masonary or concrete surfaces of walls mixed with water proofing compound (ISI Marked) @ 3% by weight of cement or as per manufacturer instructions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard/block 2K of Make :- Asian paints / Dr. Fixit or equivalent as approved by GE.

S&F in repair towel rack 600mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleatscomplete all as specified and directed. Make Prayag Cat No BA-42

Fixing only in repair wash down water closet any pattern making minor repair like changing washer complete all as specified and directed .

M&L for brooming down plastered/unplastered old decorated surface of wall incl cornice etc and applying one coat of white wash complete all as specified and directed.

All as per item No 119 above but on ceiling

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed. (Paint shall be Apex Ultima of Asian Paints)

M&L for Preparing old decorated plastered or unplastered surfaces of walls, wall projection, face of chajja, projected face of roof slab and face and sides of sunshade etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) in camouflage pattern Using Mechanical means (two or more combination). design, pattern and colour shall be as approved by GE or as per existing complete all as specified and directed. (Paint shall be Apex Ultima of Asian Paints)

Taking down alluminium door completely and refixing in the same opening after adjusting the floor spirng / adjusteing the screws for easy moving and making functional by changing rubber beading to glass/board all as specified and as directed

S&F in repiar 18mm thick celuka PVC sheet minimum 600 Kg/cum density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kg/cum density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F Double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, covering pivot made of brass, other made of mild steel heavy futy and fixed

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern all as specifed and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

M&L for Precast cement cement concrete louvers and jallies type BO 1:2:4 (12.5 mm Graded aggregate),25 mm thick (measured solid),including all mould-ings but excluding frames set in cement mortor 1:6 (precast frame shall be measureed separately all as specified and directed

M&L for steel work in tubular trusses including special shaped washers etc . Complete using ERW or induction butt welded tubes conforming toIS 1161 -1979 grade St 240

S&F frame work such as guard bars etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-310-0 .complete all as specified

S&F in repair venation blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as directed ( Make : Vista or equvalent).

S&F in repair for powder coated aluminium anodised window openable/fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt etc complete in all as specified and directed.

S&F in repair powder coated aluminium anodized grills with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as directed.

S&F in repair for powder coated aluminium anodized door (Partly paneled and partly glazed ) with 4.5 mm thick plain glass sheet and 12mm particle board interior grade both side laminated) and aluminium section weight not less than 0.55 kg/RM with self closing hydr4aulic door closer complete with all fitting complete all as specified and directed.

S&F in steel window with side hang shutters incl box type hinges with steel handles, steel peg stay and 02 tower bolts complete without glazing bars dovertailed of welded complete all as specified and directed

S&F in repairs Toilet cabinet PVC with mirror and shelves (600x450) etc complete all as directed.

S&F in repair Toilet paper holder, vitreous China,box type complete all as specified and directed

S&F in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exc 1 Sqm but n. exc 2.0 Sqm and cleaning the surface and applying cement slurry and 10 mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer @ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3 Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate incl provide spout of 40 mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc complete all as specified and directed. Note : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed by Engineer in Charge.

S&F in repair shower pannel made of anti-finger print stainless steel body, in-built ABS top shower with 60 nozzles+ water fall, 2 movable ABS body top shower with 60 nozzles+water fall, 2 moveable ABS body massage Jet, head shower with flexible hose, shelf, brass faucet body with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses complete all as specified and directed. Make : Jaguar Cat No. JPL-SSF-ST88158B or equvalent from list of makes as approved by GE

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC casing caping mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No 143 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F in repair LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F in repair LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F Surface /ceiling mounted, round LED down light fitting 18 watts with die cast aluminium housing including connecting up with PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S&F in repair 2x2 LED fitting recess mounting flate panel 36 watt, down light 240 volt 50 Htz 150 lumen/watt comprising driver locking arrangement prewired completely.

S&F 12W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz

S&F 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz,

S&F replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

S&F replacement of capacitor 2.5 Mfd, 240 V complete all as specified and directed.

S&F batten holder including with connections complete all as specified and directed.

S&F switch piano flush button type single pole one way 6 Amps all as specified.

S&F socket piano outlet 6 Amp flush button type all as specified

S&F bell push single pole 6 Amps all as specified

S&F switch piano flush button type single pole 16 Amps.

S&F socket piano outlet, 2 in 1, 3 pin 6 and 16 Amp single pole .

S&F Ceiling fan regulator electronic step switch type 120 Watt 230/250 Volts single phase complete.

S&F Ceiling fan regulator electronic step Socket type 120 Watt 230/250 Volts single phase complete.

S&F switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

S&F Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge.

S&F switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

S&F Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

S&F Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified and directed by Engineer in charge.

S&F in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

S&F in replacement PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type complete all as specified and as directed.

S&F ceiling rose surface PVC 65x50 mm type with three terminals. (For Exhaust Fans)

S&F relacement plug top 16 Amps 3 pin 230- volts

S&F relacement plug top 5 Amps 3 pin 230- volts

S&F Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed.

S&F Single pole MCB 6 to 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity, complete all as specified and directed.

S&F in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S&F in repair MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S&F in repair MCB TP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/76 twin core and making connections from ceiling rose to fan complete all as directed.

S&F in replacement 1.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in replacement 2.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in replacement 4.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in replacement 6.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

S&F in replacement of exhaust fans PVC body of size 150 mm sweep including takin g down the old unserviceable one and depositing the same in MES yard for further disposal as per existing procedure.

S&F in replacement of exhaust fans PVC body of size 200 mm sweep including taking down the old unserviceable one and depositing the same in MES yard.

S&F in replacement of exhaust fans PVC body of size 250mm sweep including taking down the old unserviceable one and depositing the same in MES yard.

S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x12 watt LED bulb B22 base complete all as specified and directed by Engineer in charge .

S&F in repair PVC gang box ISI marked three module for mounting one 5 amp socket & switch

S&F in repair PVC gang box ISI marked three module for mounting one 15 amp socket & switch

S&F in repair PVC gang box ISI marked six module for mounting two 5 amp socket & three switch

S&F in repair PVC gang box ISI marked 8 module for mounting three 5 amp socket & three switch

S&F hylum sheets 3 mm thick (ISI marked) 4" x 4" single cutting suitable for one piano switch

S&F hylum sheets 3 mm thick (ISI marked) 4" x 7" three cuttings suitable for three piano switches

S&F hylum sheets 3 mm thick (ISI marked) 4" x 7" one cutting for 6 Amp socket and two cuttings for piano switches

S&F hylum sheets 3 mm thick (ISI marked) 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

S&F hylum sheets 3 mm thick (ISI marked) 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M.R. ENTERPRISES (BID ID -3082740)

M/s M A Traders (BID ID -3093827)