GE (W)/HSR-22/2024-25 PROVN OF ADDN/ALTN OF TOILETS AND EXISTING SEWAGE LINE AT BLDG NO T-378 T-379 AND PRVON OF HARD STANDING GROUND NEAR BLDG NO T-244

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including Dismantling wrought iron or mild steel work complete all as specified and directed.

Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid including Dismantling wrought iron or mild steel work complete all as specified and directed. Note : Frame work for ceiling shall be measured and paid separately)

S&F in repair Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed.

M&L preparation of new steel surface of any description over 10 cm width or grith and applying two coat of synthetic enamel paint over one coat of zinc chrome primer complete all as specified and directed.

S&F factory made steel ventilators (Box type) with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes :- 1. The rate quoted by the contractor are deemed to be included for one coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. 2. Detail of box ventilator shall be given on drawing no TD/2013/01 sheet 1/3,2/3,3/3 3. Glass pan/wire gauze shall be measured and paid separately

Supply and fixing 3mm thick tinted sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

M&L preparation of new steel surface of any description over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brick work of except Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L Brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement etc complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:4 to brick/concrete wall surfaces trowelled to even & smooth w/o using extra cement mixed with water proofing compound as per manufacturer’s instructions etc complete all as specified and directed. Note : WPC shall be measured and paid for separately as supply only.

M&L rough cast plaster as specified (rendering coat not less than 10mm thick in CM 1:3 while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even on external wall upto cill height complete all as specified and directed.

M & L two coat of Weather coat paint over a coat of primer on new surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L of three coat of white wash on newly plastered surface as on wall including preparation complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, slab, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L RCC M-20 (Nominal Mix) (20mm graded aggregte) in slabs supported on walls, beams and columns complete all as specified and directed.

M&L for precast RCC Nominal mix Type B0 1:2:4, 12.5mm graded aggregate as in Cover slab including necessary formwork complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match, including Dismantling of old tiling complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6, including Dismantling of old tiling complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (With out taking off shutters from the frames) complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note : M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges shall be paid separately.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long complete all as specified and directed.

S & F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

Supply & fixing MS Bands supports or stays for Rainwater pipe incuding both if required hand made sliding bolts, clamps, holdfasts, wall ties and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Taking up or down 15mm bore dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floors including fitting complete all as specified and directed.

S&F steel water tubing galvanised 20mm bore, medium grade fixed to walls and ceiling or in floors including fitting complete all as specified and directed.

Taking down eaves gutter or RWP of any description complete all as specified & directed. Including fittings.

S&F, 110mm dia PVC bend any radius complete all as specified and directed.

S&F , 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F , 75mm dia PVC (SWR) junction double, (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in floor/trenches completed all as directed. Including necessary demolition of PCC/RCC and excavation of soft/loose soil in trenches refilling the soil after laid pipe in trenches and making good dia complete all as specified and directed.

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints laid in floor/trenches complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as specified and directed.

S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as directed complete all as specified and directed.

S & F in repair PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding and flush pipe) and WC Connector with leaping ring connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed.

S&F in repair, PVC Low Level cistern 10 ltr capacity, valveless, syphonic action type with float, handle including 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete all as specified and directed.

Supply& fixing of 32mm bore Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms suitable for urinal) complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

Dismantling water tanks , open or closed, in position and removing to store of capacity exc 500 ltr but n.exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (triple layer White in colour cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes etc complete all as specified and directed.

S&F 20 mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed.

S&F 15 mm bore/dia brass CP basin mixer long shank / pop up for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed.

S&F in repair 15 mm bore/dia Wall Mixer 3-in-1 System except shower rose Aerator complete all as specified and directed.

S&F 100mm dia PVC (SWR) vent cowl complete all as specified and directed.

M&L for plain Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregates as in foundation ,filling and mass complete all as specified and directed.

M&L for Plain Cement concrete type B-1 using 20mm graded stone aggregates as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Providing, cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in Repair Towel Rail 600mm long of PTMT fixed and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

Excavation in trenches n.exc 1.50 wide and n.exc 1.50 deep and getting out in any type of soil complete all as specified and directed.

Cutting is to existing manholes for new drains, for removing existing branch drain, making good to walling and rendering cutting out branch channel and making good benching (bore of pipe 200 mm) complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 200 mm dia complete all as specified and directed.

S&F 150 mm dia (6") PVC pipe of working pressure 4 Kg/cm2 single socketed in any length and joining pipes with adhesive solution in laid in trenches or in floors complete all as specified and directed.

S&F 200 mm dia (6") PVC pipe of working pressure 4 Kg/cm2 single socketed in any length and joining pipes with adhesive solution in laid in trenches or in floors complete all as specified and directed

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested complete for 200 mm dia pipe complete all as specified and directed.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25 cm thick soil complete all as specified and directed.

Removing excavated soils n exc 250 m and depositing where directed at a level n.exc 1.50 m above starting point complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick (in tranches and surface), watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

M&L for 75 mm cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, ointed with cement mortar 1:3 (1 cement: 3 coarse sand), ncluding making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), includingmaking drainage opening wherever equired complete all as specified and directed.

M&L of cement concrete type B1 1:2:4 (40 mm graded aggregate) complete all as specified and directed.

M&L for applying two coats of synthetc enamal paint after preperation of new surface of concrete complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring (light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed.

All as per item No 91.00 but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board complete all as specified and directed.

All as per item No 91.00 but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

M&L for point wiring with 4 sq.mm, single core, PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS 694 marked, with multistranded copper conductors and earth continuity wire with similar 4 sqmm cable (including connecting to earth dolly) drawn through and including rigid PVC conduit and conduit accessories / fittings, fixed / laid in concealed in walls and surface on ceilings (including cutting chases in wall) and also including sunk in type pressed steel terminal box and 3mm thick plastic laminated sheet complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S & F in repair for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F Sheet metal enclosure distribution board SPN,8 way, single door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 32Amps, type B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

S&F i Sheet metal enclosure distribution board TPN, 4way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed.

Supply and fixing MCCBs, 4 Pole, 63 Amps 240 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCCB should be the same as that of DB

Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion, complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Removal of surplus soil ( any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where complete all as specified and directed.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified and directed. Note : Thickness after punning shall be considered for payment.

M&L for brick protection with old size sub class 'B' bricks falt laid , length of bricks across the route of underground cable complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of size 25 sqmm 4 core LT underground cable, 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed. Note : Excavation, earth work, sand cushion & brick protection shall be paid separately.

Supply and Fixing electric water heater storage type steel body with stain less steel inner tank and heating element upto 2KW capacity 25 Ltr BEE 5 Star rated complete with all accessories such as safety valve, Thermostats, NRV, PVC connection piece etc complete all as specified and directed.

Supply & fixing sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 Volt complete all as specified and directed.

M&L for providing/cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing exhaust Fan metal body heavy duty, single phase , 230 volts 250 mm sweep with louver complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall ) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as specified and directed.

moti construction company (BID ID -3058738)

SHRI HARI BUILDERS (BID ID -3060918)

M/S D.N Choudhary (BID ID -3060730)

Balaji Construction Co. (BID ID -3067945)

Siya constructions (BID ID -3068892)