PROVISION OF OTM ACCN

Amount

Lump sum price worked out by the tenderer for “BUILDING /STRUCTURE WORKS" as listed in Schedule ‘A’ Section - I

Lump sum price worked out by the tenderer for “INTERNAL ELECTRIFICATION WORKS" as listed in Schedule ‘A’ Section - II (Part-I)

Sch 'A' Sec - II (Part-II), (INTERNAL ELECTRIFICATION WORKS)

Point wiring (using approved colour coding as per IS) with 1100 volts grade, stranded copper conductor 1.5 Sqmm (nominal area), FRLSH,PVC insulated and unsheathed cable IS 694 marked TEC and FIA approved and including PVC concealed conduit(thickness not less than 1.5mm and 20 m dia) and its fittings ISI marked PVC junction boxes terminated in sunken/pressed metal flush box for mounting of modular switches/sockets/fan regulators and white cover plate with frame, also including FRLSH PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area) 1100 volts grade, copper conductor cable as earth continuity conductor to common earth and connected to earth dolly including necessary cutting/chases complete all as specified and directed by Engineer-in-Charge for One light point controlled by one switch or one (Ceiling/ Wall/ Exhaust) fan point controlled by one switch and regulator and one bell point controlled by one bell push (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) Note :Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost.

All as per Item No. 4.00 here in before but for One three pins 5 Amps switch socket outlet point on independent board etc complete all as specified and as directed by Engineer-in-charge.

All as per Item No. 4.00 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches etc complete all as specified and as directed by Engineer-in-charge.

All as per Item No. 4.00 here in before but for One light point controlled by two 2-way switches of 5 amps etc complete all as specified and as directed by Engineer-in-charge.

All as per Item No. 4.00 here in before but for One 6 pin 5/15 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and 2.5 sqmm copper cables as earth wire.

Supply and fix ceiling fan 1400 mm sweep AC 230 V BLDC type without remote, 5 Star rated super enamelled copper winding of B class insulation, single phase minimum 26 Watt (+10%) 0.90 (Min) PF 220 CMM 350 RPM (+10%) temperature rise 40 degree maximum complete with 03 Nos blades down rod and accessories white colour total harmonic less than 10% 5 speed including hanging in position and connection with flexible cord twin core twisted copper conductor of size 23/0.0026 from ceiling rose to fan etc complete all as specified and directed by Engr - in charge.

Sub-main wiring with 2 single core FRLSH insulated and unsheathed cable with stranded copper conductor of 4.0 Sq mm drawing into & including heavy grade PVC Concealed conduit ISI marked of suitable size with all accessories and one additional 1 run of wire of 4.0 Sq mm but green in colour for earth DBs and boxes with proper thimbles,including necessary cutting/chases complete all as specified and directed. Note: (i) Three runs each of one RM of 4.0 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose..

Sub-main wiring with 2 single core FRLSH insulated and unsheathed cable with stranded copper conductor of 6.0 Sq mm drawing into & including heavy grade PVC Concealed conduit ISI marked of suitable size with all accessories and one additional 1 run of wire of 6.0 Sq mm but green in colour for earth DBs and boxes with proper thimbles,including necessary cutting/chases complete all as specified and directed. Note: (i) Three runs each of one RM of 6.0 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose..

Sub-main wiring with 4 single core FRLSH insulated and unsheathed cable with stranded copper conductor of 6.0 Sq mm drawing into & including heavy grade PVC Concealed conduit ISI marked of suitable size with all accessories and one additional 1 run of wire of 6.0 Sq mm but green in colour for earth DBs and boxes with proper thimbles,including necessary cutting/chases complete all as specified and directed. Note: (i) Five runs each of one RM of 6.0 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose..

Supply and fixing LED bulb 1 X 9 W having Lumens efficiency , BEE rated 3 star LED lamps etc complete all as specified and directed by Engr - in charge.

Supply and fix Modular White cover plate with frame 1 module 240 volts complete all as specified and directed by the Engr-in-charge.

Supply and fix Modular White cover plate with frame 3 module 240 volts complete all as specified and directed by the Engr-in-charge.

Supply and fix Modular White cover plate with frame 8 module 240 volts andcomplete all as specified and directed by the Engr-in-charge.

Supply and fix Modular White cover plate with frame 12 module 240 volts andcomplete all as specified and directed by the Engr-in-charge.

Supply and fix Modular blank White cover plate complete all as specified and directed by the Engr-in-charge.

Supply and fix modular metal flush metal box 1/2 module complete all as specified and directed by the Engr-in-Charge.

Supply and fix modular metal flush metal box 3 module complete all as specified and directed by the Engr-in-Charge.

Supply and fix modular metal flush metal box 8 module complete all as specified and directed by the Engr-in-Charge.

Supply and fix modular metal flush metal box 12 module complete all as specified and directed by the Engr-in-Charge.

Supply and fix LED tube light fittings 1 x 20 W, 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge.

Supply and fix LED mirror tube light fittings 1 x 10 W, 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge.

Supply and fixing 450 mm sweep wall air circulators complete with all accessories, 230 V, all as directed by Engr-in-Charge.

Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers and all accessories and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix MCB single pole 40 Amps 10 KA 240 volts "B" series .complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB SP 6 -32 Amps,10 KA,,'C' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge.

Supply and fix MCB SPN 40 to 63 Amps 10 KA 240 volts "C" series complete conforming to IS/IEC-60898-1 & IS/IEC-60947-2. complete all as specified and directed by Engr-in-Charge

Supply and fix sheet metal enclosure double door distribution board TPN 4 way 415 V, 50 Hz, IP 43 with neutral neutral busbar 200 Amp, Earthing bar and din rail complete.

Supply and fix MCB TPN 4 Pole 63 A ,B curve 415 V with breaking capacity 10 KA suitable for TPN DB 4 way,50 HZ testing commissioning all as directed by Engr-in -Charge.

Supply and fix sheet metal enclosure double door distribution board SPN 8 way 240 V, 50 Hz, IP 43 double door with neutral busbar 200 Amp, Earthing bar and din rail complete.

Supply and fix sheet metal enclosure double door distribution board SPN 4 way 240 V, 50 Hz, IP 43 double door with neutral busbar 200 Amp, Earthing bar and din rail complete.

Supply and fix sheet metal enclosure double door distribution board SPN 2 way 240 V, 50 Hz, IP 43 double door with suitable rating neutral busbar , Earthing bar and din rail complete.

Supply and Fixing LED building security light with pressure die cast aluminum housing with polycarbonate cover, finless design, dedicated peanut optics, > 100 lumen/W system efficiency, minimum 2500 system lumens, 25 W system wattage (including driver), color temperature > 5700K, CRI>80, IP65 protection, IK07 rating including suitable size of 1.2 meter long bend pipe (bend at 120°) with clamps and fixing accessories etc.The potted electronic driver with THD<10%, PF>0.95, LED fitting is complete all as per OEM specified and directed. LED driver and housing is of same make as of light fitting. All type of testing for photometry, electrical and electronic parameters is done in approved lab.

Material & Labour for earthing complete with galvanized steel earth plate electrode 60×60cm×6mm thick electrode burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1, using 20 mm graded stone aggregate, provn of 40 mm RCC with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade GI pipe for watering, 40 mm dia light grade Gl pipe for lead protection in and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-I (2009) connected to earthing test point all as specified and indicated including testing on completion including retrieving of old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing as directed by Engineer-in-Charge. NOTE : - (i). Earthing strip GI/copper upto 7.5m will be measured and paid under this item only. (ii). The earth chamber shall be constructed 50 cm away from the edge of earth pit and the cost of the same is deemed to be included in the rate quoted for above item. (ii). Quoted rate is deemed to be inclusive of cost of demolition of old earthing as directed by Engr-in-Charge. (iii). The new earthing so constructed must have resisitance value below 2 ohms. If the aforesaid resistance value is not achieved contractor has to make proper aadditions/alterations to the newly constructed earthing at his own cost.

Subtotal

Lump sum price worked out by the tenderer for “INTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Section - III (Part-I)

Sch 'A' Sec - III (Part-II), (INTERNAL WATER SUPPLY WORKS)

Supply & fixing Bib tap long body,15mm bore bib tap, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule , complete all as specified and as directed.

Subtotal

Lump sum price worked out by the tenderer for “ROAD, PATH & HARD STANDING WORK" as listed in Schedule ‘A’ Section -IV (Part-I)

Sch 'A' Sec - VI (Part-II), “ROAD, PATH & HARD STANDING WORK"

Material and labour for machine pressed precast concrete interlocking paver block rubber moulded any shape and size with grey cement and no pigment confirming to IS 15658-2006 of 65 mm thickness M-35 Grade. prepolished & preglazed, shape haxagon / trigular / zigzag / I-shaped etc, as directed, confirming to relevant IS, having compressive strength not less than 350 Kg/ Sqcm, laid over 150mm thick PCC 1:4:8 type D-2 and including 25mm thick layer of sand cushioning and filling the interstices etc with sand complete all as specified and as directed.

Subtotal

Lump sum price worked out by the tenderer for “PARKING SHED WORK)" as listed in Schedule ‘A’ Section -V

Lump sum price worked out by the tenderer for “SEWAGE DISPOSAL WORK" as listed in Schedule ‘A’ Section - VI (Part-I)

Lump sum price worked out by the tenderer for “SUMMER APPLIANCES WORK" as listed in Schedule ‘A’ Section -VII (Part-I)

Sch 'A' Sec - VII (Part-II), “SUMMER APPLIANCES WORKS"

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 6000 CuM per hour, Copper wound motor/ pump ISI marked to IS 996 latest, steel body , synthetic Honey comb pads (thickness 15mm or above), stnd mounted with castor wheels, Aluminium Blade material, 400 watts, sump tank capacity 120 liters, galvanised steel sheet (ISI marked to IS 277 latest) with zinc coating not less than 100 gms/sq.meter, sheet thickness (nominal) for filter panel, grill, Top of cooler body, cabinet 0.1 mm, Sump Tank sheet thickness 2.0 mm, All internal sufaces of steel body coller painted with water resistant paint to IS 9862 latest. complete all as specified and directed by Engr-in-Charge.

Supply and installed voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input varriation between 170 V to 250 V with output voltage stablized at 230 V with accuracy of + 2.5% and of capacity 2.0 KVA.

Subtotal

Lump sum price worked out by the tenderer for “EXTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Section - VIII (Part-I)

Sch 'A' Sec - VIII (Part-II), (EXTERNAL WATER SUPPLY WORKS)

Supply and fixing cast iron sluice valve 100 mm dia with flanged ends class I PN 1.0 (heavy duty ISI marked) confirming to IS:14846-2000, drilled type, steel spindle, CI gate with brass ring, iron wheel handle, suitable for CI/DI pipe line, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc complete all as specified and as directed.

Material and labour for Construction of brick masonary valve pit chamber size 900 X600 X1000 mm (internal dimension) using sub class 'B' bricks complete including excavation & earth work, returning fillig and disposal of surplus soil to distance not exceeding 50m and deposited where directed, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation, coping on top in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, brick work in cement mortar (1:4), inner plaster 12 mm thick in cm (1:3) finished even and smooth and pionting flush externally as the work proceeds in the same mortar, MS sheet cover 3.15mm thick mounted on angle iron frame of size 40 x 40 x 6mm with handle and locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and embeded portion of MS work duly applying black bitumenous paint before embeded complete all as specified and as directed.

Cutting of existing CI pipe line 150mm dia and inserting tee 150 x 80 x 150 mm for taking branch connection all as directed including threading excavation and earth work etc. complete all as specified and directed..

Subtotal

Lump sum price worked out by the tenderer for “EXTERNAL ELECTRIFICATION WORKS" as listed in Schedule ‘A’ Section - IX (Part-I)

Sch 'A' Sec - IX (Part-II), (EXTERNAL ELECTRIFICATION WORKS)

Material & Labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric LT cables (heavy duty) 95 sqmm 3.5 core ,earthed system, stranded aluminium conductor including cable glands, cable lugs etc, to suit the cable size, 1100 volt grade, ISI marked, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified

Material & Labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric LT cables (heavy duty) 16 sqmm 4 core ,earthed system, stranded aluminium conductor including cable glands, cable lugs etc, to suit the cable size, 1100 volt grade, ISI marked, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified

Supply and fix cable route indicator made up of RCC M-20 grade of dimension 450 X300 x 100 mm with suitable foundation including embossing of letters like LT cable with paint of suitable colour , proper finishing and smoothing of surface all as specified and directed by Engr-in-charge

Material and labour precast concrete cable cover, class LV, type 2 with peak, size 300mm x 180mm x 40mm complete all as specified and as directed by Engineer-in-Charge.

Earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. Strip of size 32x6 mm by means of bolts,nuts and check nuts and washers of galvanised steel to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including chamber made up of PCC 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover, 20mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing complete all as specified and directed.

Supply and fix LED All in one solar street light fitting 30 W with in-built Lithium ferro phosphate bettery 12V, 21AH, IP-65, Monocrystaline silicon panel & 40 (20 x 2) W LED , CRI>80, Lighting efficency upto 120LM/W, CCT-6000 to 6500 Deg K, 12.8V 35 AH lithum (lifePo4) battery, Full power upto 12hrs: Saving mode upto 48 hrs, integral PIR Sensor, MPPT Charge controller with 90 to 96% efficiency, fixed at a height of minimum 7 mtr height of Pole of 100mm dia medium grade GI with Aluminium paint, Hybrid (AC-DC) option available, with in-built BMS technology, MPPT Solar charger controller as fitted Make of Wipro product code LR14-591-XXX-65-XX of 40W of dimention 1120x305x140 mm or of equivalent makes specified in the list of makes complete all as directed and specified

Supply & Fix 4 Pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 16 KA fitted in suitable size enclosure and mounted on suitable size angle iron base frame to be grouted on exsisting PCC platform.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

Labour for boring underground upto 100 mm bore for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and GI tubing in soft/loose soil complete all as specified. Note : (GI pipe light grade shall be measured and paid separately)

Subtotal

Lump sum price worked out by the tenderer for “HOT WATER SUPPLY WORKS" as listed in Schedule ‘A’ Section - X

Sch 'A' Sec - X (Part-II), (HOT WATER SUPPLY WORKS)

Supply installation commisioning and testing of solar water heating system storage type having capacity 500 ltr per day including solar panel, flat plate collectors (ISI marked), absorber shall be made of copper with Black Chrome undercoat nickle solchrome continuous coating, stainless steel hot water storage tank 500 ltr capacity minimum thickness of 2mm with of heat exchanger to be placed on roof at a height of 3 mtr, aluminium cladding, , collector and hot water tank angle stands, temp gauge & other controls, heat exchanger with feeder tank having thermic fluid / Anti - freeze solution including electric backup 3x3 KW. & complete all as per manufactures instructions and directed by Engineer-in-charge.

Subtotal

Lump sum price worked out by the tenderer for “EXCAVATION, EARTHWORK AND SITE CLEARANCE DEVELOPMENT WORK" as listed in Schedule ‘A’ Section - XI

M/S Mukesh Kumar Gupta

S M BUILDERS

shree balaji builders

M/S W R traders