Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-Finance 4A TIJJALA LANE KOLKATA 39 | KOLKATA | KOLKATA | WEST BENGAL | 700039 | L1 | Accepted-Finance L1 | |
| 2 | L2₹5.0 L+₹1,597.01 (0.32%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹5.0 L+₹2,133.32 (0.43%)Rejected-Finance NA | NA | NA | 121004 | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | S B ENTERPRISE L1 | R D ENTERPRISE L2 | TARA ENTERPRISE L3 |
|---|---|---|---|---|---|---|
| 1.00 | Lifting the pump unit with special attachment after disconnecting the power supply | 1 | ITEM | 9,100 ₹10,845.38 Lowest | 9,700 ₹11,560.46 | 9,200 ₹10,964.56 |
| 2.00 | Dismantling the pump unit part by part such as cable gland motor cover, motor casing mechanical seal, drain out of all oil, motor shaft etc. by using special tools. | 1 | ITEM | 25,300 ₹30,152.54 Lowest | 25,500 ₹30,390.9 | 25,300 ₹30,152.54 Lowest |
| 3.00 | Old winding of the stator have to b stripped. Stator slots have to filled, cleaned and dressed. Complete re- winding the stator winding with the new conductor and class ‘H’ insulation. Winding have to bake, varnished. properly | 1 | ITEM | 84,800 ₹1,01,064.64 Lowest | 85,100 ₹1,01,422.18 | 85,100 ₹1,01,422.18 |
| 4.00 | Metallization, machining and proper treatment of rotor shaft as required. | 1 | ITEM | 27,100 ₹32,297.78 | 26,900 ₹32,059.42 Lowest | 27,300 ₹32,536.14 |
| 5.00 | Supply and replacement of mechanical seal & oil seal along with necessary rubber ring and components as required corresponding to the pump model no. KRTK150-401/654-360 | 1 | ITEM | 1,30,200 ₹1,55,172.36 Lowest | 1,30,500 ₹1,55,529.9 | 1,30,200 ₹1,55,172.36 Lowest |
| 6.00 | Supply and replacement of bearings corresponding to the pump model no. KRTK150-401/654-360 | 1 | ITEM | 45,500 ₹54,226.9 | 45,400 ₹54,107.72 Lowest | 46,300 ₹55,180.34 |
| 7.00 | Metalizing of shaft journal both side (de&nde) and machining the same and match with the bearing bore. (Quotation) | 1 | ITEM | 18,600 ₹22,167.48 | 18,500 ₹22,048.3 | 18,400 ₹21,929.12 Lowest |
| 8.00 | Metalizing/re sleeving of bearing housing cover on both sides(de & nde)and machining the same and match both bearing housing its normal condition. | 1 | ITEM | 17,660 ₹21,047.19 | 17,600 ₹20,975.68 | 17,300 ₹20,618.14 Lowest |
| 9.00 | All the incoming leads should be re tapped, re insulated and re fixing of the terminals. | 1 | ITEM | 4,100 ₹4,886.38 Lowest | 4,600 ₹5,482.28 | 4,400 ₹5,243.92 |
| 10.00 | Filling the graded specific oil in the pump chamber for conforming the leakage. | 1 | ITEM | 27,500 ₹32,774.5 | 27,200 ₹32,416.96 Lowest | 27,500 ₹32,774.5 |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
24 Dec 2022, 5:00 pmClosed
DG(S_D)
Kolkata Municipal Corporation 5, S.N Banerjee Road, Kol-13
Complete Repairing, Servicing and overhauling of 130LPS DWF pump no.4 at Behala FC DPS under GRBU.
2022_KMC_432446_1
KMC/GRBU/T5/22-23
Open Tender
Electrical Work/ Equipment
Item Rate
15 days
BDPS
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹10,000
6 Oct 2026
14 Dec 2022
27 Dec 2022
14 Dec 2022
24 Dec 2022
14 Dec 2022
Amount
Lifting the pump unit with special attachment after disconnecting the power supply
Dismantling the pump unit part by part such as cable gland motor cover, motor casing mechanical seal, drain out of all oil, motor shaft etc. by using special tools.
Old winding of the stator have to b stripped. Stator slots have to filled, cleaned and dressed. Complete re- winding the stator winding with the new conductor and class ‘H’ insulation. Winding have to bake, varnished. properly
Metallization, machining and proper treatment of rotor shaft as required.
Supply and replacement of mechanical seal & oil seal along with necessary rubber ring and components as required corresponding to the pump model no. KRTK150-401/654-360
Supply and replacement of bearings corresponding to the pump model no. KRTK150-401/654-360
Metalizing of shaft journal both side (de&nde) and machining the same and match with the bearing bore. (Quotation)
Metalizing/re sleeving of bearing housing cover on both sides(de & nde)and machining the same and match both bearing housing its normal condition.
All the incoming leads should be re tapped, re insulated and re fixing of the terminals.
Filling the graded specific oil in the pump chamber for conforming the leakage.
Assembling the pump motor unit part by part with necessary gasket, rubber ring, nut and bolts, lock washers etc.
Lower down the pump motor set after complete assembly and provide electrical connection in the starter panel board and trial run.
Transportation charges with loading and unloading.
R D ENTERPRISE
TARA ENTERPRISE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .