Loading
Loading…
Loading…
Tender Value
₹3.9 Cr
EMD Value
₹7.8 L
Closing Date
8 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN/I/TSK
25 conditions · 14 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited.
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-XIVA, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Clause Regarding GST-(a) Tenderer should furnished their GSTIN numbers representing the States in which they are registered for GST, along with address of Registered Office, Place of business in State etc. (b) The contract is under GST act & rules as applicable time to time.(c) All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law.
Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
( i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
ii) The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered. (iii) It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from Govt/Semi-Govt Organizations and PSUs are only acceptable.
(b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Note: Separate completed works of minimum required values for each component can also be considered for fulfilment of technical eligibility criteria.
(ii)In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each
Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/ last bill paid by company in support of above work experience certificate.
"No post tender correspondence will be done with the participant tenderer(s) for deficient credentials noted during scrutiny of tender/ offer nor any credential will be accepted after opening of the tender and the offer shall be decided on the basis of submitted/ credentials downloaded with offer only".
Similar Nature of work:- Any P.way work.
28 conditions · 8 needing a document upload
The tenderer should furnish detail information in regards to Employment/Partnership etc. of Retired Railway Employee as per clause 16 of GCC -2022 and clause no. 14 of second sheet of Tender document. In case no employment/Partnership etc., NIL declaration to be submitted.
Railway Boards letter No. 2020/ACII/9/6/e dtd.07.04.2022At the time of submission of Bank Guarantee, it is necessary that following details entered into SFMS by bank authority while issuing Bank Guarantee by vendors/contractors in favour of Railways. (R.B's letter No. 2020/ACII/9/6/e dtd.07.04.2022)IFSC CODE SBIN000RAILIFSC type BRANCHBANK NAME STATE BANK OF INDIABRANCH NAME RAILCITY NAME NAVI MUMBAIADDRESS SECTOR-11, CBD BELAPUR, NAVI MUMBAIDISTRICT NAVI MUMBAISTATE MAHARASHTRABG ENABLED YESThis IFSC code is only valid for BG issuance and verification in favour of Railways.
The tenderer/s shall submit a duly filled Tender Form (First Sheet) as Annexure-I of Section-VII of the Standard tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The following documents should be specified for submission along with tender:
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work.
B. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
C. List of Works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
D. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
The manual/offline mode of payment through Demand Draft, Bankers Cheque, Cash Deposit Receipt shall not be available against works tenders. The bidders will have to make all payments either through Net Banking, debit/credit etc. available on IREPS Portal. Fixed deposit Receipt (FDR) will not be accepted as EMD for tenders invited on IREPS (e-tender portal).
Tenderers intending to participate in the e-tender must make payment of the Cost of Tender Document and Earnest Money, online as per the provisions available in IREPS Works Tender Module.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2014 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.
Note for Commercial compliance :-
In case of items C. and D. of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Tender would close at the specified time and date. In case the specified date is declared a holiday, the Tender would close at the same time on the next working day.
Tinsukia Division - Through Ballast Recoupment works including deepscreening in connection with "Furkating Jn. - Jorhat Town - Mariani Jn. (SL) - TBR - 49.500 Tkm" under ADEN/MXN.
01-TSK-ENGG-47-2026~NFR
01-TSK-ENGG-47-2026
Open
Works - General
12 Months
Tinsukia, Assam
₹0
₹7.8 L
15 Sept 2026
15 Sept 2026
24 Sept 2026
46 items across 2 schedules · ₹3,60,18,784.88 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Using Soil Class SQ1 | cum | 4000.00 | 391.59 | 15,66,360 |
| 2 | Below the ballast and above blanket layer with minimum strengths in Grab test, Trapezoidal Tear test and Puncture test 1750N, 800 N and 5800 N respectively. | Sqm of | 10000.00 | 360.12 | 36,01,200 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 400.00 | 39.91 | 15,964 |
| 4 | For Casual/Scattered Rail Renewal work | RM | 400.00 | 42.26 | 16,904 |
| 5 | Locations other than Ballasted Deck Bridge | Each | 300.00 | 532.7 | 1,59,810 |
| 6 | Rail section of 90R and below | Each | 200.00 | 119.15 | 23,830 |
| 7 | Rail section of 52Kg and above | Each | 500.00 | 142.98 | 71,490 |
| 8 | Depth of 250 mm below bottom of sleeper For Plain Track : | - TRM | 6000.00 | 580.72 | 34,84,320 |
| 9 | Under Traffic Block Conditions: | cum | 49500.00 | 59.02 | 29,21,490 |
| 10 | For 60 Kg/60EI-R260 grade Rail, Single shot crucible fitted with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. | Each | 600.00 | 2,078.4 | 12,47,040 |
| 11 | For PSC Sleeper Track with Sleeper Density 1660 | of TRM | 5000.00 | 154.78 | 7,73,900 |
| 12 | 1 in 12 PSC layout | Set | 30.00 | 16,744.29 | 5,02,328.7 |
| 13 | For rail panel more than 40 metre length | TRM | 25000.00 | 48.74 | 12,18,500 |
| 14 | With Contractor's Hydraulic Rail tensor | TRM | 49500.00 | 57.03 | 28,22,985 |
| 15 | Without Rail tensor | TRM | 49500.00 | 50.06 | 24,77,970 |
| 16 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified Engineer in-charge including disposal branches, bushes outside cess/yard. | TRM by of | 49500.00 | 16.74 | 8,28,630 |
| 17 | For 60 Kg Rails | TRM | 4000.00 | 108.04 | 4,32,160 |
| 18 | Carrying out preparatory works for operation of Ballast Cleaning Machine (BCM) which includes making trench in track for inserting cutter bar, supporting track on wooden block supplied by Railway, removal of ballast along with muck from shoulder which is out of reach of cutter chain and putting the same in cutting width or between rails. Rate includes miscellaneous works, e.g. opening and fixing of joggled fish plates, OHE Bonds, dismantling & removing obstructions etc. | TRM all re- | 49500.00 | 17.72 | 8,77,140 |
| 19 | Carrying out various works during operation of BCM, like filling up of ballast at deficient location from locations where ballast is excess or from adjoining tracks, required initial packing, adjustment of PSC Sleepers, provision wooden blocks supplied department and attending track parameters etc. complete so as to make track fit for kmph speed. | TRM by 20 | 49500.00 | 44.07 | 21,81,465 |
| 20 | Removal of screened muck discharged BCM, where muck disposal on side slope restricted due to platform, cutting, OHE mast etc. and disposing it beyond 5m from edge cutting up to 3m deep or alternatively carting it up to 50m for disposing off beyond the end of cutting / platform and making up cess wherever low. | by TRM is of | 4000.00 | 33.48 | 1,33,920 |
| 21 | Pulling the left over ballast to the shoulders and dumping excess ballast in the cribs shoulders including boxing/profiling as IRPWM of track together with left over stretches at fixed structures/masts immediately after FRM work, leveling muck for making up cess and side slopes including removing and re-fixing of traction bonds during line block with all contractors labour, tools, plant, all lead, lift, crossing track etc. complete and as directed by Engineer-in-charge. | TRM and per the of the | 49500.00 | 34.79 | 17,22,105 |
| 22 | Pre, during, and post BCM works for deep screening of ballast in Points and crossings with all contractor's labour, tools and plants required to carry out the work to the standards in specific time including crossing of tracks etc. complete and as directed by the Engineer - in - charge. I. Pre-BCM Operation : a) making trenches for insertion of cutter bars at various locations as per the directions of engineer charge. i.e.., one trench ahead of one length from SRJ and second trench near sleeper No 62 ( 1in 12) etc., b) Filling ballast up to sleeper level. c) Tightening fittings/ plate screws, ERCs, Stud bolts, check rail bolts. II. During BCM Operation : Assistance to S&T Department : Opening cables at approach of Points & Crossings, TLD Boxes/ removing of Point motor and refixing the same and covering cables after passing BCM in block period with S&T Staff. Engineering : c) Removing of two long sleepers i.e.., sleeper No 3 & 4 and refixing the same in position during block after passage of BCM. d) Removing obstruction i.e.., S&T CC block duly digging with crow bars and breaking with chisel/ hammer, cutting rail pegs with gas. e) To remove, excess ballast on rail table for free movement of BCM and for packing purpose. f) Extension of cutter bar wherever required in assisting machine staff. g) Removing of cutter bar/ Chain links from the trenches after screening work BCM. III . Post BCM Operation : a) Packing switch portion including Motor long sleeper i.e.., SRJ to heel joint to reset Point for train movement & initial packing of lead portion allow train at 20KMPH and lifting the track two stages (50mm to 75mm in each wherever required for correcting longitudinal surfacing b) Dumping of ballast the deficient portion in crib, on main turnout side for initial packing purpose. Boxing / Levelling of muck duly ensuring levelling of muck on cess side and lowering cess to the deep screened depth removing of muck in between the lines leading up to 250mts. Note: 1. For technical reasons, some of the points and crossings cannot be deep screened either fully partially by BCM, in which case, the left over length will be deep screening manually. 2. length of points and crossings assembly payment of this item should be taken from to longest concrete sleeper available beyond heel of crossing along main line. | TRM as in rail up of a) of of b) of by to in lift) the in line c) of and and or The for SRJ just | 3000.00 | 470.81 | 14,12,430 |
| 23 | For day time block working | TRM | 148500.00 | 21.32 | 31,66,020 |
| 24 | Level crossing with CC block surface | Sqm | 2200.00 | 370.84 | 8,15,848 |
| 25 | 1 in 12 Turnouts (Under Traffic Block Conditions) | Set | 30.00 | 12,224.2 | 3,66,726 |
| 26 | Carrying out various miscellaneous works, proper upkeep of crew rest van / rest room directed by machine in-charge of Track Machines by providing a team of 2 labours 12 hours shift, broadly mentioned hereunder: (1) Bringing water from nearby source cleaning machine with water jet or suitable means;(2) Fuelling machine duly bringing diesel / hydraulic oil from the stacked drums;(3) Bringing water to staff rest van staff rest room, cleaning rest van / rest room, cooking food for Track Machine staff bringing food from outside (cost of food shall be borne by the staff concerned).;(4) Guarding & watching machines, spare parts, oils, grease etc. during day and night time all locations, wherever necessary, instructed by the machine in-charge;(5) case, contractor provides less no. Labour/Mate, payment will be deducted each such person @ 75% of the accepted item rate. | for Shift as for and any or or at as In of for | 300.00 | 1,568.06 | 4,70,418 |
| 27 | BCM/FRM/UNIMAT (7.5 KVA generator and 12x500 W) | Night | 100.00 | 6,252.3 | 6,25,230 |
| 28 | CSM / DUO / 3X with or without DGS (7.5 KVA generator and 8x500 W) | Night | 70.00 | 5,431.83 | 3,80,228.1 |
| 29 | 60 Kg - 110/90 UTS - On Running Line | Each | 700.00 | 412.7 | 2,88,890 |
| 30 | 52 Kg - 90 UTS- On Running Line | Each | 300.00 | 334.53 | 1,00,359 |
| 31 | On Running Line | Each | 400.00 | 81.15 | 32,460 |
| 32 | Sleeper Spacing, Re-spacing / Squaring sleeper by Hydraulic Sleeper Spacer with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992. | of Each | 500.00 | 83.2 | 41,600 |
| 33 | Manufacturing, supplying and fixing Curve Indicator / Point Indicator / SEJ Boards to provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with lead & lift as per specification and including painting of details with enamel paint, directed by Engineer in-charge (Earthwork concreting will be paid separately) | Each be of all as & | 200.00 | 1,290.93 | 2,58,186 |
| 34 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing matting inside the refuge by keeping them upside down position with a minimum of sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead lift, handling etc., with all contractor's men material complete and as directed by Engineer-in-charge. Note: Earth-work will be paid separately under relevant item. | Each as in 14 and the to | 100.00 | 4,677.71 | 4,67,771 |
| 35 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 160.00 | 827.84 | 1,32,454.4 |
| 36 | Manufacture and supply of Precast gradient Posts of size 1.65 x 0.60 x 0.075 m in RCC 1:2:4 mix, engraving letters and leading work spot, fixing in position with CC 1:3:6 concrete duly making pits of size as required, painting the post, writing the letters on both sides of posts in 2 coats with enamel paint approved quality to the Railways drawings/IRPWM with contractor's materials, cement, steel, labour, tools, plant, with lead and lifts etc., complete as specifications and as directed by Engineer-in-charge. Note: Excavation, Concrete and steel work will be paid under relevant items. | Each to of all per the | 100.00 | 703.73 | 70,373 |
| Schedule total | ₹3,57,08,505.2 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentwithPVCon18.08.2026.pdf Tender document 1
ATTACHMENT
ArbitrationAdvancecorrectionslip10.pdf
ATTACHMENT
GCCACSno.11_compressed.pdf
ATTACHMENT
JPOofCablecutting.pdf
ATTACHMENT
LabourLawprovisionguideline.pdf
ATTACHMENT
SpecialconditionTBR49.500Tkm.pdf
ATTACHMENT
TenderDocumentwithPVCon18.08.2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .