REPAIR/REPLACEMENT OF SANITARY FITTING, TILES AND OTHER B/R ITEMS IN OTM ACCN ALONGWITH JOINERY, FLOORING AND PAINELLING IN MD ACCN IN AOR OF AGE B/R III UNDER GE 864 EWS

M&L for glazed ceramic tiles in vertical surface 300x 450 or 300 x 200 and 7 mm thick (digital /nanotech or double charged tiles as approved by GE) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering in cement mortar 1:6 (if reqd in any portion) & dismantling floor, hearth or wall tiling (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for non - skid ceramic tiles 7 to 8 mm thick (digital /nanotech or double charged tiles as approved by GE) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 & dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580mm x 440 mm white, with integral foot rests complete all as specified and directed.

S&F in repair 10 litres, PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair vitreous china premium/ 1st quality wash down water closet (Pedestal Pattern - EWC) white/ ivory/off white (closed pattern including seat cover & all necessary accessories like bolts (excluding flushing cistern & flush pipe) complete in all respect all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 580mmx450 mm excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified & directed.

S&F in repair 15mm bore WHB mixer, for mixing hot & cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type, white including waste pipe, coupling, CP urinal spreader and all accessories complete all as specified and directed.

S&F in repair 15 mm angle valve/stop valves, CP fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.

S&F vitreous china one piece EWC , white including all accessories, seat cover, bolts, flushing cistern complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china counter top wash basin white excluding taps waste chain and plug and porcelain stopper but including brackets, coupling, waste pipe etc complete all as specified & directed.

M&L for pre polished green marble work 18 to 20mm thick in steps, jambs, pillars, window cills, cooking platforms, CB shelves and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match including grinding/moulding the edges complete all as specified and directed.

M&L for vitrified ceramic tiles 9-10 mm thick (square/ rectangular) polished (digital /nanotech or double charged tiles as approved by GE) , area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of in CM 1:4 for laying floor finishes including dismantling of floor tiles of any description complete all as specified and directed.

M&L for vitrified ceramic tiles 9-10 mm thick (square/ rectangular) polished (digital /nanotech or double charged tiles as approved by GE) , in skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick in CM 1:3 including dismantling of wall tiles of any description complete all as specified and directed.

M&L for pre polished glossy finish machine cut Kota stone slab flooring 18-20 mm thick (including one piece stones on stairs) over cement screed bed 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for pre polished glossy finish machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm cement plaster in CM 1:4 including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

S&F in repair toilet paper holder of chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F for 4/5 mm thick looking mirror fancy type having border of designer etching as approved by GE mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed.

S&F in repair 28-30 mm dia curtain rods, mild steel (coloured - in wood finish or any other colour approved by GE) with suitable fixing brackets and 02 x decorative finials for each curtain rod and all other accessory complete all as specified and directed.

S&F 12 mm thick gypsum ceiling boards including anodised aluminium snap grid frame work (size of grid 605 x 605mm) for false ceiling and dismantling of old ceiling of any description / thickness complete all as specified and directed.

M&L for 10-12 mm thick 1st class soft wood Australian wooden wall panelling including fillets & cornices, fasteners and all other accessories over 6 mm thick BWR plywood fixed over necessary timber scantling and frame work including two coat of varnishing, French polishing and preparation complete all as specified and directed. Note:- Cost of dismantling old panelling/boarding of any description and disconnecting of electrical boards, DBs, switches or any other electrical appliances etc and installation after completion of work is included in quoted rate.

S&F aluminium powder coated ventilators made of the following specifications :- (Net external size of ventilator shall be measured. Following items are including in this unit rate.) (a) Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick. (b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Upper portion shall be fixed with aluminium powder coated louver guides (movable) fixed with 3 mm thick pinheaded glass with suitable EPDM beading including suitable handle and clips. (d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel. (e) Repair to the jamb, cills and all sides around the window is included quoted rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

M&L for treatment to sunken portions of toilets by demolition of existing treatment of any description and thickness (including tiles, concrete, sanitary fittings etc), removal rubbish outside MoD land and 10 mm thick plaster in CM 1:4 with water proofing liquid conplast 421 of Make - Fosroc or equivalent as specified and applying one coat of each Nittoproof 100 and Nittoproof 120 of Ms Fosroc or equivalent as specified on plastered surface and rendering again 10 mm thick plaster in cement mortar 1:4 mixed with conplast 421 of Ms Fosroc or equivalent in sunken portion and CI pipe joints shall be filled/jointed with mixture of cement, fine sand and Nittoproof 130 of Ms Fosroc or equivalent as specified and provide hole in the wall to fix 20 mm dia GI spout 600 mm long and PCC 1:5:10 or red bajri/brick bats filling in sunken portion and finished top layer with 75 mm thick PCC in 1:2:4 to receive tiles complete all as specified and directed. Note: Plan area Length x Breadth of WC will be measured for payment purpose.

M&L for two coats of white wash on wall including preparation of old surfaces all as specified and directed.

M&L for two coats of white wash on ceiling, soffits of staircase etc including preparation of old plastered surfaces all as specified and directed.

M&L for preparation of old wall surface and applying two coats oil bound distemper smooth finish (including application of wall putty wherever reqd to make up for undulations/cracks etc) complete all as specified and directed.

S&F rotational moulded triple layered polyethylene water storage tank 1000 ltr capacity (cylindrical vertical with closed top or any other shape as ordered) hoisted and fixed in position including tank connection nipple, all other accessories & dismantling of old water tank complete all as specified and directed.

S&F rotational moulded triple layered polyethylene water storage tank 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including tank connection nipple, all other accessories & dismantling of old water tank complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all traps, tees, elbows, sockets etc fittings complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors (including ornamental and intricate design), ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe.290. Gde E-165, complete all as specified and directed.

M&L for preparation of new steel surfaces and applying one coat of red oxide primer and two coats of synthetic enamel paint on new steel surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

M&L for cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed.

Taking down chowkhats/frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats/frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each complete all as specified and directed.

Taking down chowkhats/frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each & refixing in same opening after repair to tiles etc. complete all as specified and directed.

M&L for aluminium anodised powder coated sections of approved design and required size for door / windows frames or chowkhats / partitions / shutters, sliding channels / tracks etc including jointing cleats, MS nut & bolts or steel screws, dash fasteners, rawl plug for fixing of screws in wall or floor etc complete all as specified and directed.

S&F anodised aluminium powder coating of any colour (thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, EPDM beading, handles 2 Nos, 01 X lock with duplicate key & 03 x hinges 100 mm in each door, anodised aluminium snap beading, screws etc and 12 mm thick particle board in lower panel ad 5 mm thick glass in upper panel and any other accessory reqd complete all as specified and directed.

S&F aluminium powder coated partitions made of the following specifications :- (Net external size of partition shall be measured. Following items are including in this quoted rate.) (a) Aluminium frame powder coated (Vertical and horizontal members) @ not exceeding 1.20 m distance both ways of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Lower portion of partition shall be fixed with 12 mm thick particle board fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories. (c) Upper portion of partition shall be fixed with 5 mm thick glass (as per site requirement) fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories. (d) Dismantling of old unserviceable partitions of any description and any thickness (AC sheets, wooden particle boards with wooden frame etc). (e) Repair to the jamb, cills and all sides around the partition is included in quoted rate. The repair finishes to match the existing surfaces like tiles, plastering, OBD etc.

S&F hollow PVC wall lining /panelling on walls/ceiling consisting of 5mm thick Plain colour PVC sheet including all PVC sheet fillet of width 20mm 'L' & 'U' for wall panelling inclusive of fixing on to wall/ceiling with suitable frame work including dismantling of old wall panels complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S square tube including taking down old door chowkhats with shutters (of any description) and shall be measured as each, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

S&F 150 mm long aluminium handles cast type all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges, medium weight, and fixed complete all as specified and directed.

S&F in repair 15 mm pillar taps, CP fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bib taps, CP fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F repair 15 mm bore brass CP wall mixer 2 or 3 way (complete set) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 40 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections, complete all as specified and directed.

S&F 32 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections complete all as specified and directed.

S&F 25 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections all as specified and directed.

S&F 20 mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections, all as specified.

S&F 40 mm PP-R gate valves (brass insert) as per requirement of the site all as specified and directed.

S&F PP-R gate valves (brass insert) 32mm outer Dia as per requirement of the site complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed .

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 complete all as specified.

M&L for preparation of newly plastered wall surface and applying two coats oil bound distemper over coat of primer, smooth finish complete all as specified and directed.

M&L for granite (of any type as approved) 18-20mm thick machine cut, as in floors, WHB slabs, skirting, pillars or in any position bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding/ moulding and polishing over and including 15 mm thick screed bed in CM 1:6 including dismantling of old stone slabs complete all specified and directed.

M&L for Khatamband pattern false ceiling design as approved by GE with ornamental wood work made out of 6 mm thick deodar wood, cutting holes for ceiling lights and having two coats of varnish (Make: touch wood of Asian paint or equivalent) over a coat of natural wood primer including dismantling of old ceiling of any description and thickness the Khatamband to be fixed over 12 mm thick BWR plywood over timber scantling frame work of size 600 mm x 600 mm with second class hardwood 100 mm x 75 mm as main joist and 50 mm x 50 mm secondary joist fixed with nails/screws and finally finishing with French polish (two or more coats) complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old roof sheets (any description, any thickness) complete all as specified and directed.

S&F for pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old roof sheets (any description, any thickness) complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F aluminium powder coated glazed windows fixed type made of the following specifications :- (Net external size of window shall be measured. Following items are included in this quoted rate.) (a) Aluminium frame powder coated stiles, bottom, central mullion sections & top rail of hollow section 65mm x 40mm x 1.80 mm thick. (b) The fixed window shall be fixed with 3.50 mm thick tinted glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Aluminium powder coated grill of weight not less than 1.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (d) Repair to the jamb, cills and all sides around the window is including in quoted rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

S&F aluminium powder coated sliding window made of the following specifications :- (Net external size of window shall be measured. Following items are included in this quoted rate.) (a) Aluminium frame powder coated all around of hollow section 100 mm x 40 mm x 1.30 mm thick. (b) Provn of 03 track runners of size 92 x 31.75 x 1.00 mm. (c) Provn of glazed sliding shutters (02 Nos) of section 40 mm x 18 mm x 1.10 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading and locking clips arrangement. (d) Provn of 01 No gauzed shutter of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. section of shutter as per Para 5 (c) above. (e) Aluminium powder coated grill of weight not less than 1.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (f) Repair to the jamb, cills and all sides around the window is included in quoted rate the repair finishes to match the existing surfaces like tiles, plastering etc.

S&F aluminium powder coated openable double window (Gauzed and Glazed) made of the following specifications :- Net external size will be measured. Following items are included in this quoted rate.) (a) Aluminium frame powder coated all around of hollow section 63 mm x 38 mm x 1.50 mm thick. (b) Provn of glazed openable shutter of section 44 mm x 18 mm x 1.10 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading, 02 Nos 100mm powder coated aluminium hinges, 02 Nos 100 mm long powder coated aluminium tower bolts, 01 Nos100 mm powder coated aluminium handle and 01 No hook & eye & any other fitting reqd for each shutter. (c) -ditto- as in Para 6(b) above but using stainless steel wire mesh 0.36 mm dia and 1.40 mm aperture in lieu of 3.50 mm thick tinted glass. (d) Aluminium powder coated grill of weight not less than 1.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (e) Repair to the jamb, cills and all sides around the window is included in quoted rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

S&F second class HW plain solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F factory made 35mm thick plain framed panelled shutters, any No. of panels with panels of plywood 9mm thick for two or more panel construction and 12mm for single panel construction, BWR conforming to IS fixed to timber frame of 2nd class hard wood, all style & rail are as per clause 8.24 (a) of SSR Part – I all as specified and directed.

S&F factory made 35mm thick 2nd class hard wood glazed and Skelton door shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I sec 8 clause 8.20(a) complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of surface complete all as specified and directed.

S&F for galvanized corrugated 0.63mm thick mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc including dismantling of old corrugated steel sheeting ,any gauge, thickness complete all as specified and directed.

S&F for plain, galvanised, 0.63mm thick mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling of old plain sheeting ,any gauge, thickness complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25cm thick, with grey cement and no pigments set, jointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:4, over and including 75 mm thick cement concrete 1:4:8, type D- 2 (using 40mm graded stone aggregate) as levelling course in floors complete all as specified and directed.

M&L two coats of synthetic enamel paint on new steel surfaces of any description, over 10cm in width or girth, not otherwise described over a coat of red oxide zinc chrome including preparation complete all as specified and directed.