PROVN OF GENERAL TOILET BATHROOM FOR LADIES AND GENTS NEAR URC AND PROVN OF CEILING FANS FOR JCOS OR MD ACCN OF 9FOD UNDER GE S PATHANKOT

Amount

Surface excavation (not exc) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil, complete all as specified and directed.

Excavation in tranches in n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil, complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded aggregate) in foundation, filling, mass concrete. complete all as specified and directed.

M&L for RCC Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like M-25, 20 mm graded agg.

M&L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns,posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces type 1:3:6 (20 mm) agg.

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface .

M&L for Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) sub base 100 mm thick .

M&L for Brick work with subclass ‘B’ bricks,straight or curved on plan exc 6m mean radius, built in CM 1:6

S&F for vitreous china wash down water closet pan (Orissa patern) white with integral foot rest of of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F CP brass toilet paper holder, superior quality complete all as specified and directed.

S&F soap dish dish type of milld steel Chromium plated and wooden/plastic cleats , complete all as specified and as directed.

S&F for Flushing jet spray/ health faucet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete.

S&F for Vitreous China wash down water closet pan and trap, (pedestal pattern) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

M&L 75mm CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

M&L 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement type B-1 1: 2:4 and making good wall or floor tiling to match existing surface.

All as per Srl item No 15 as above but for 75mm

S&F roof trusses (framed), trussed, purlins, rafters rails and fastenings and heavy bracket framing (beem, tee, angle, channel or flat sections) including distance pieces, cleats etc of FE 410 W (Gde E-250) quality B including one shop coat of red oxide primer complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws. Sheet colour approved by Engineer-in-Charge complete all as specified and directed.

S&F glass shelves 300mm ( with ABS brackets) 300x125x6 mm complete all as specified and directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back availabel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips .

M&L for 75 mm dia CI cross 'T' double junction , (double T), equal or unequal

S&F for PVC waste pipe 32mm dia, 60 cm long for WHB with cup, fixed in repairs complete.

M&L Preparation of new surfaces and applying two coat of cement base paint over a coat of white wash on walls all as spd

M&L Preparation of new surfaces and applying two coat Of OBD over a coat of white wash on walls all as spd.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

M&L for rendering 15 mm thick in cm 1:4 on fair faces of block masonry /brick work surfaces finished even and smooth without using extra cement. complete all as specified and directed.

M&L for rendering 10 mm thick in cm 1:4 on fair faces of block masonry /brick work surfaces finished even and smooth without using extra cement. complete all as specified and directed.

M&L for Damp proof course 40 mm thick to horizontal or vertical surfaces including necessary formwork. 1:2:4. type B0.

M&L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for 1:6 cm,type c) 1:3:6 (12.5 mm graded agg) for ventilator.

M&L for Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm size.

S&F for Butt hinges, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-2

S&F for Extruded aluminium alloy handles, fabricated type, anodised 100 mm size.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point soft and hard soil.

S&F for bib taps, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repair Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repair angle valve cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match colcourd tile.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes.CM 1:4.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tile.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde E-165) .

S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F for low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550x400mm excl tap,waste,chain and plug and porcelain stopper but incl brackets

S&F Galvanised steel water tubing 15 mm bore (dia) Medium Grade with all fittings , fixed on walls and ceiling or laid in floors as required,complete all as specified and as directed.

S&F Galvanised steel water tubing 20 mm bore (dia) Medium Grade with all fittings , fixed on walls and ceiling or laid in floors as required,complete all as specified and as directed.

S&F Stop Valve 20 mm Bore (dia), Cast Copper Alloy, screwed diwb, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for Union and fixed ,complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed

S&F for Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors 100 mm bore.

S&F for Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors 75 mm bore.

S&F for Bends (any radius), 100 mm ndiminishing pieces or tapers (larger bore measured).

S&F for Bends (any radius), 75 mm diminishing pieces or tapers (larger bore measured).

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L for sand filling under floors or in foundations including watering and consolidation all as specified

M&L for machine pressed precast interlocking paver block with grey cement and no pigment any shape and size confirming to IS-15658-2006 OF 60 mm thickness ,M-35 Grade all as specified

M&L for Cement concrete Type C2 1:3:6(40mm graded aggregate) in foundation, fillings & mass concrete including necessary formwork complete all as specified.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing .

S&F factory mad Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification.

M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edge, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed Type C1 1:3:6 (20 mm) graded

Provision of septic tanks 50 users with subclass ‘B’ bricks bricks including inlet and outlet chamber brick masonary with top of slab with RCC 1:2:4 slab cover,15cm above ground levele including necessary Excavation and earth work in soft/lose soil soil and disposal of surplase soil,15mm PVC band pipe etc complete as per Drawing CEPZ/TD-013/2013 SH 1/5 TO 5/5

M&L 75mm thick plain cement concret type C-2 1:3:6 (using 40mm graded crushed stone aggregate) as in flooring/ Sub base/ Plinth protection all as spd and directed.

S&F in repair ceiling fans 1200 mm Sweep Ceiling Fan, Energy Saving, BLDC Motor without romote complete with canopy, blades, down rod, split pin etc complete of approx wattage 30 to 32 Watt rated suitable for operation on AC 220-240 V AC, 50 HZ, PF >0.95, Air delivery approx 230 cum/min.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit (ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in CI sunken/pressed steel terminal boxes covered with new 3mm thick plastic laminated bakelite sheet fitted with brass screws and washers for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done.

One light point or one fan point or bell point controlled by one switch SP one way 230 Volts.

One 3 pin 5 Amps socket point on the same board.

M & L for switch piano flush type single pole one way 5/6 Amp, 240 volt complete all as spd.

M & L for ceiling rose surface bakelite 2 to 3 terminals.

S&F for AC single phase 10-60A Net Meter DLMS compiance of accuracy class 1.0, 240V 50 Hz, with backlit LCD, Optical port (measures Import KWh, Export kWh, net kWh, V,I,kW, 6 month history of Energy), with Rs232 Port including dismatling of existing meter and deposting it yto MES store Yard, making all necessary input and output connection of the new energy meter. Complete as specified & directed.

M & L for replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. Note: The quoted rate inclusive for the following :- (a) Proper colour coding is to be followed as per IS Specification. (b) Test certificates of cables to be submitted before commencement of work/ claiming for payment.(c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement.(d) Electric Wiring test sheet before and after completion of wiring to be submitted before claiming payment

S&F in replacement existing unsv distribution board iron clad, with double door 4 way with IP-54,1K-09 protection, cemet spill prptector suitable for MCCB as incommer AC 415 Volts three pole with thermal release adjustable type (80% to 100 % ) and MCB as outgoing ,complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 25 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).

S&F in replacement of existing old u/s MCB SPN with MCB SPN C curve ,240 volts any rating from 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

S&F in replacement sheet metal enclosure 8 way, with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).

S&F for MCB Single Pole and Neutral (SPN) of capacity 32 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position and takingdown old one all as directed.

S&F in replacement of existing old u/s MCB SPN with MCB SPN C curve ,240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

S&F in replacement MCB single pole 240 volts any rating 6 to 32 amps, with rupturing capacity 10 KA, complete all as specified and as directed.

S&F cable size 06 sqmm, twin core multistranded 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service with galvanised steel wire complete all as spd and directed.

S&F for inverter type LED fitting 1 x 20W, including LED tube 4' long having bipin holder, connector blosk, driver etc 230 Volts, duly prewired and electrical connections upto ceiling rose using PVC insulated overall sheathed flexible copper conductor cable of size 0.5 Sq mm 03 core, complete all as specified & directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified & directed.

S&F Ventilation fan AC sinlge phase 230/240 volts of size 225 to 250 mm sweep PVC body with louvre including connecting to ceiling rose and dismantling old UNSV fan and depositing to MES store yard all as specified and directed.

S&F in repair LED inverter street light 45W with RTC having luminium housing with clear toughened glass front coveer, IP 66 protection, operating voltage of 140V to 270V, having an efficiency of upto 02 hrs backup, reserve polarity protection , hight voltage cut off at 300V+- 10V and 5 KV internal surge protection with a power factor greater than 0.95 complete making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 2.5 Sqmm, complete all as specified & directed.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked)of size 15mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion. NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing).

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

VIKRAM SINGH MANHAS