Development of Jorpukhuri Park in Guwahati City

Amount

CIVIL WORKS: SITE CLEARANCE

Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.

Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm

PAINTING ON STEEL AND METAL SURFACES

Painting two coats (excluding priming coat)on new steel and other metal surface with enamel paint of approved brand and manufacture (Asianpaint/ Bergerpaint/ ICIpaint/J&Npaint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (ii).Surfaces up to 100mm in width or girth.b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING

b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

PAINTING ON WOOD AND WOOD SURFACES

Removing old paint or polish from wood and woodbase surfaces with paint remover of approved brand and manufacture and making the surface even.

PLASTER OF PARIS & WALL PUTTY

Providing surface preparation for walls,celling etc.using average 1.50mm thick plaster of paris including clearing,rubbing withsand paper,filling gaps,depression etc.where necessary,with chalk powder and and plaster of paris paste,making the surface even and smooth complete at all levels as specified and directed.

REINFORCEMENT

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar

STEEL WORK

Steel work rivetedand/orbolted/riveted in built up sections,framework including cutting,hoisting,fixing in position and applying a priming coat of red-lead pain tupto 4.6m heigh tabove plinth includingd rilling holes,supplying,fitting and fixing with bolts and nuts or welding, if necessary as directed. (b)In single stanchions(columns) composed of R.S.J. or channels with caps,bases, splices, angle brackets etc.

ANTITERMITE

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

MS GRILL

Providing ,fitting and fixing M.S.grill of required pattern for windows/clerestory windows/opening with M.S.flat sat required spacing in frame all round,squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (a) Fixed to wooden frames

GRILLS

Providing, fitting and fixing M.S. grill of required pattern for windows/clerestory windows/opening with M.S. flats at required spacing in frame all round,square or round M.S. bars with round headed bolts and nuts or screws. II) Ornamental grill (b) Fixed to steel frames

EARTH WORK: EXCAVATION, DISPOSAL, BACK FILL.

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) Ordinary soil.

CEMENT PLASTERING (10mm)

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3

CEMENT PLASTERING (15mm)

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side a) In cement mortar 1:3

SHUTTERING

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

Columns, Pillars, Posts & Strut (a)Square, Rectangular, polygonal in plan or any shape likeTee/L etc. having plane vertical face (ii) Using 25mm thick plank

Sides and Soffits of Beams,beam haunchings,cantilever girders,bressumers,lintels and horizontal ties. (a) For depth not exceeding 1.0M. (i) Using 38mm thick plank

Flat Surfaces such as soffits of suspended floors,roofs,landings,canteleverslabs,chajjas, balconies and the like. (ii) Using 25mm thick plank

Earth/sand filling in plinth in layers not more than150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c)With river sand or silt (predominantlynonplastic) by truck carriage including loading and unloading.

DOOR FRAME & WINDOW

Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8nos. of M.S. holdfast, providing closing/ holding device for 2nos. tower bolts of door for each side and 1no. for fitting and fixing Al drop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates).

Providing, fitting and fixing factory made exterior type fully panelled single leaf door shutters of approved brand conforming to relevent I. S code having kiln seasoned and vacuum pressure treated Hollock/Bonsum/Sundi rail and styles with pannel of Anchor brand 12 mm thick veneered Teak wood particle board bonded with phenol-formaldehyde synthetic resin adhesive conforming to relevent I.S code including 4 nos of oxidised iron butt hinges (100mm x75 mm x3.55mm) to each leaf complete. (iii) 30mm thick

Providing, fitting and fixing steel windows/ventilators(openable)of standard rolled steel sections as perrele vantI.S.Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges(not more than 65mm and not less than 15mm wide)bolting device and steel handles,peg stays of 300mm long etc.complete as per drawing including applying a priming coat of red-lead paint.

SOLING

Providing soling in foundation and under floor with stone/best quality picked jhama brick,sandpacked and laid to level and in panel after preparing the subgradeas directed including all labour and material sand if necessary dewatering, complete. (a).Brick on flat soling.

DISMANTLING OF STRUCTURES

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) ii )By Mechanical Means for items No. 202( b) & ( c) (A)Cement Concrete Grade M-15 & M-20

FLOORING AND FLOOR FINISH

65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop. 1:3:6 (1cement :3coarse sand:6coarse aggregate of 25mm and down) and 15mm thick wearing layer in cement concrete in prop.1:1:2(1cement:1coarse sand:2coarse aggregate of size10mm down)laid in panel sand finished with a floating coat of neat cement finish(using cement slurry for bond @2.75kg.per square metre of floor area) including curing etc. complete as directed.

ROOFING AND ROOF TREATMENT

Providing Iron Plastic Laminated corrugated coloured sheet Roofing at all levels including fitting and fixing galvanised J or L hooks, bolts and nuts of 8 mm diameter with Bitumen washer 35 mm x 35 mm x 3 mm and G.I. Diamond washer 40 mm x 40 mm x 3 mm complete excluding cost of roof truss, purlins etc. (Roof trusses, Purlins etc. to be measured and paid separately). (c)0.60mm thick

ANTISKID TILES

Providing Antiskid Tiles of approved quality size,shape not less than 8mm on floor,skirting over a cement mortar bed 15mm thick of 1:3 (1cement:3coarsesand) approved make fix with Fix-A-Tile (Choksey /Sika/ Pedelite/Rouf) /white cement complete at all level as specified and directed. (A) CERAMICi) Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

CERAMIC TILES

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). iii) Of size 600 mm x 600 mm and above

COPING

Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.

CLADDING

Providing polished granite tiles of approved quality, size and shape and thickness not less than 8mm, on walls over 15mm thick, cement mortar bed in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary, finished with flush pointing on wall with ordinary cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed.

FLOORING/PAVING

Fine dressed and rubbed 1:stone slab flooring over 18mm thick base of cement mortar 1:5(1 cenent:5 course sand) with joints mm wide,sides buttered with cement mortar 1:2(1 cement:2 stone dust) admixed with pigments to match the shade of stone and pointing with the same mortar. Red sand stone (i) 25mm thick

BRICK WORK

230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure. (II) In superstructure above plinth level up to 1st floor level. (b) In proportion 1:4.(1 cement:4 sand)

BRICK WORK

Brickwork in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

MANHOLE

Providing fitting and fixing (600x600)mm 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified

STONE MASONARY

Stone masonary work in retaining wall, wingwall,abutment,foundation, steps, plinthetc.i cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammerd ressed including bonding, providing facestone through stone and centering including racking of joints,curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. (a)Random Rubble Masonary

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 4 sand :8 coarse aggregate by volume

DOORS / WINDOWS / VENTILATORS / CLERESTORY WINDOWS

Providing fitting and fixing 1/3 panelled 2/3glazed wooden shutters for doors/windows including oxidised iron butthinges(100mmx75mmx3.55mm) with necessay screws including glass panes (other fittings to be measured and paid separately) A) With Teak wood / Sissu wood. (i) 40 mm thick.

Providing wood work in frame(chowkaths )of doors,windows,clerestory windows and other similar works wrought,framed and fixed in position in contact with C.C or brick masonry wall including supplying,fitting and fixing with M.S.holdfast (40mmx3mmx250mm)as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricideoiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood

REINFORCED CEMENT CONCRETE

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine. (A) In substructure up to plinth level Foundation,footing,columns with base tie and plinth beam,pilecap,base slab,retaining walls,walls of septic tank,inspection pit and the like and other works not less than 100mm thick up to plinth level. P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. b) M20 grade concrete or Prop. 1:1.5:3

ii)Columns,pillars,posts,struts,suspendedfloor,roof,landing,shelfandsupport,balcony,lintel,sillband,beam,girder,bressumer,cantilever,staircase(except spiral staircase and landing)including pre paring the top surface and finishing ofnosing. P) Using admixture, plasticiser etc b) M20 grade concrete or Prop. 1:1.5:3

INTERLOCKING BLOCK PAVEMENT

Providing and laying of interlocking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658- 2006 of thickness 80mm and 28 days compressive strength not less than 30N/m over a layer of bedding sand of compacted thickness 30mm , laid either in stretcher / running / herring bone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint fillings and to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.

EARTH FILLING

Raising lowsite around the building with approved soil obtained from outside by truckcarriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax,land compensation,municipal gate fees,if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only

MACHINE DRIVEN PILE

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1) (II) Concrete Grade M25 iii) Pile dia 400 mm

REINFORCEMENT

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (A) TMT bar made of Primary producer (From Primary producer)

EARTHWORK EXCAVATION

Earthwork in excavation for structures as per drawing and technical Specification Clause 305.1. including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material I. Ordinary soil (upto 3m depth)

PLAIN CEMENT CONCRETE

Providing concrete for plain/reinforced concrete in open foundation complete as per drawing and technical specification clause 802, 803, 1202 & 1203. I. Pcc grade M10 Nominal mix 1 : 3 : 6 (hand mixing)

STONE MASONARY

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 II. Course rubble masonry (2nd sort) (iii) in cement mortar 1 : 4

FILTER MEDIA

Providing and laying filter media with granular crush aggregates as per specification to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind retaining wall to the full height compacted to firm condition complete as per drawing and technical specification clause 1204.3.8

STONE MASONARY

Stone masonry in cement mortar 1:3 for parapet complete as per drawing and technical specifications Clauses 700 and 1208.4 I. Random rubble masonry

PLASTERING

Plastering with cement mortar ( 1:4) 15mm thick on Brick/Stone works as per drawing and technical specification clauses 613.4 and 1204

STEEL LINER

Providing Steel Liner 10 mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing. (for Size 400 mm)

DRINKING WATER COOLER

Supply, installation, testing and commissioning of drinking storage water cooler 100 ltrs. with reserve osmosis system 50 lph inside a MS made room on specified location with all required architectural, MEP, instrument control fitting and fixing structure not limited to foundations,footings, etc. and all other related works as per drawing and specification.

E-TOILETS

Supply, installation, testing and commissioning of E-Toilets on specified location with all required architectural, MEP, instrument control fitting and fixing structure not limited to foundations,footings, etc. and all other related works as per drawing and specification.

Supply, installation, testing and commissioning of CCTV network on specified location with all hardware and software accesories, architectural, MEP, instrument control fitting and fixing structure not limited to foundations,footings, etc. for coverage of the premises as per drawing and specification (Min 6 cameras)

DUSTBINS

Supply and installation of PVC Dustbins of 60 Ltrs

WPC RAILING

Supply and installation of WPC Railing

WPC ON FLOOR

Supply and installation of WPC on floor

MURAL ON BOUNDARY WALL

Supply and installation of MURALS

FLOATING FOUNTAIN

Supply and installation of Floating Mountain

HORTICULTURE WORKS: LAWN MAKING BY TURFING

TREES ORNAMENTAL

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making (60cm x60cm x60cm), filling the pit with a ppropriate soil media,manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A)Lagertroemia thorelli/Plumeria Alba

(E)Plumeria Rubra-Plumeria rubra of plants height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags

PALM PLANTING

Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil,river sand,cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)

(B) With Areca palm (Butterfly palm)/ Kentia palm (II) Using earthen pot of 60 cm dia.

(A) With Raphis excelsa-Providing and displaying of Raphis palm plant, having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot / Plastic pot & as per direction of the officer-in-charge.

(E)Cycus revoluta specimen plant, having 45 to 50 fresh and healthy,leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi,

SHRUBS

Supplying and planting of ornamental shrub (below1'- 0" height) including pit making (60cmx60cmx60cm), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .

(A) Radhachura / Krishnachura / Rat ki rani / Ixora / Jetuka

(B)Allmanda/ Khorikazai/ May flower/ Kamini / Kathanda / Tecoma/ Acalypha/ Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda

(c)Supply and stacking of plant Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm

(d)Hibiscus-Supply and stacking of plant Hibiscus variegated of height 60-75 cm. with 8-10 branches and healthy variegated foliage in cement pots of size 35 cm .

(e)Nyctanthes arbor-tristis:Supply and stacking of plant Nyctanthes arbor-tristis (Hasingar) of ht. 90- 105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.

(f)Providing of Croton Golden specimen plant, having ht. 90 cm to 1.05 cm with 5 to 6 branches, well developed, fresh and healthy foliage in 30 cm size of Earthen pot / Plastic pot.

(g)Nerium oleander- Supply and stacking of plant Nerium oleander variegated of height 60-75cm., multibranched in earthen pots of size 25 cm as per direction of the officer-in-charge

(h)Mussaenda-Supply and stacking of plant Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge.

(i)Euphorbia milli-Euphorbia milli hybrid variety with multi branch, full bloom, with freshand healthy well developed having 30 to 45 cm ht. plant in 35 cm Cement Pots

(j)Acalypha Wilkensia-Providing and Displaying Acalypha red plant well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge

(k)Murraya paniculata-Supply and stacking of plant Murraya Koenigii spreng (Kadipatta/meetha neem) of ht 45-60 cm well developed in earthen pots of size 20 cm.

(l)Supply and stacking of plant Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm.

(m)Hibiscus-Supply and stacking of plant Hibiscus variegated of height 60-75 cm. with 8-10 branches and healthy variegated foliage in cement pots of size 35 cm .

(n)Cestrum nocturnum-Supply and stacking of plant Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm

(o)Euphorbia pulcherrima- Supply and stacking of plant Euphorbia pulcherrima (dark red doublebracts) well branched of height 60-75 cm. in earthen pots of size 25 cm

GROUND COVER

(A)Cuphea Hyssopifolia-Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot.

(b)Hamelia patens dwarf-Supply and stacking of plant Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm

(c)Duranta golden-Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot.

(d)Coleus-Providing and Displaying of plant Coleus broad leaves having 3 to 4 branches equal well developed with fresh & healthy foliage in different colour in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

(e)Wedelia trilobata-Providing and Displaying of Wedelia trilobata plant,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge.

(f)Tradescantia -Providing and Displaying of Tradiscantia plant, full of leaves in Earthen Pot/ Plastic Pot of size 20 cm. as per direction of the officer-in-charge.

(g)Providing and Displaying of Ophiopogon jaburan (variegated ) plant, full of variegated leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge

CLIMBER

(a)Clerodendrum splendens-Supply and stacking of Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

(b)Bougainvillea-Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, efulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

AQUATIC PLANTS

Supplying and planting of aquatic plants (waterLilyandLotus) after preparation of under water soil including organic manuring,supplying the required quantity of water and maintenance for a period of one year from the date of completion complete as specified and directed

BED PLANTING

Supplying and planting of Dahlia /Chrysanthemum /Gladiolus on the ground (bed planting , bed size 45 cm x 45 cm x 45 cm ) including the preparation of the soil , providing organic manure and fertilizer , pesticides as per specification and necessary maintenanc for a period of 4 months from the date of planting complete as specified and directed .

BAMBOO

Bamboo -Buddha bally variety with umbrella shape plant having 120 to 135 ht. plant with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant

HEDGE PLANTING / EXTERNAL HEDGE

Supplying and planting of suitable plant materials for preparation protective/external hedge(50cm wide)including the preparation of the ground by mix ingorganic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD

(i) With Duranta

(ii) With Kamini

(iv) With Thuja / Ixora

NON SOR ITEM

(a)Canna red

(b) Vetiver Grass

(c )Canna Red

(d) pandanus veitchi

(e) Hydrangea

WATER SUPPLY AND DRAINAGE: PIPING

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

v) 40 mm diameter

vii) 63mm diameter

x) 110mm diameter

DEEP TUBEWELL

Preparation of site for placement of the drilling rig including excavation of mud pit, circulation drain, collection chamber etc. all complete as directed

Movement of Rig from the Divisional Head Quarter to the drilling site including cost of P.O.L. all complete as directed.

Transportation of all ancillary equipments, camp materials, welding set, rig accessories etc. From Divisional Head Quarter to worksite to and fro including cost of P.O.L. all complete as directed. (a) Upto 100.00 Km distance from Divisional H.Q.

Transportation of all store materials like pipes, strainer, cone, socket, clamp, bentonite etc. From Divisional Head Quarter to worksite to and fro including cost of P.O.L. all complete as directed. (a) Upto 100.00 Km distance from Divisional H.Q.

Transportation of air compressor from the Divisional Head Quarter to the drilling site with all accessories including cost of P.O.L. All complete as directed. (a) Upto 100.00 Km distance from Divisional H.Q.

Transportation of P.O.L. all complete as directed.

Construction of temporary accommodation and low cost sanitary facility for drilling staff including cost of camp materials viz. cots, tables, chairs, utensils, dresses, safety helmets etc. and dismantling the accommodation after completion of the work all complete as directed.

Providing water supply facilities at drilling site all complete as directed. (a) By installing 1 no. of Singur Hand Pump.

Boring in soft soil/ normal clay/ sandy soil by bit of size either 5⅝" or 6⅞" or 7⅞" and collecting sample of soil at every 3.0 m depth or wherever there is a change of strata in sample boxes with the distinguishing marks including arranging and carriage of necessary boring materials/ tools etc. and withdrawing the drill pipe for lowering well assembly etc. all complete as directed.

Boring in hard soil/ pebbles/ gravel by bit of size either 5⅝" or 6⅞" or 7⅞" and collecting sample of soil at every 3.0 m depth or wherever there is a change of strata in sample boxes with the distinguishing marks including arranging and carriage of necessary boring materials/ tools etc. and withdrawing the drill pipe for lowering well assembly etc. all complete as directed.

Reboring in soft soil/ normal clay/ sandy soil by bit of size either 8½" or 9⅝" or 12" from either 5⅝" or 6⅞" or 7⅞" all complete as directed.

Reboring in hard soil/ pebbles/ gravel by bit of size either 8½" or 9⅝" or 12" from either 5⅝" or 6⅞" or 7⅞" all complete as directed.

Extraction of drill pipes / bits against skin Friction at the end of each day and after completion of of the operation including washing of the bopre hole all complete as directed.

Lowering / Sinking of well assembly including welding of pipe joint for 150 mm dia G.I. / M,S, casing pipe, strainer all complete as directed.

Developing of the D.T.W. with air compressor, Make-Kirloskar/Cummins and 10.50 Kg.Sq. Cm capacity all complete as directed.

Supplying and packing pea gravel around the periphery of casing incluing local carriage, screening, washing etc. all complete as directed.

U.P.V.C. Casing Pipes(IS : 12818 / 1992)

Submersible Pump 3 HP (CRI 3 PHASE 12 STAGE)

STORAGE TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. (I)2000 Lt capacity (a) Sintex make

VALVES

CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING (b) 65 mm dia

Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. reflex valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints). (a) 80 mm dia

SUPPLY RATE OF PVC SPECIALS

UPVC Bend 90o

MASONARY CHAMBER

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

HYDRANT SYSTEM

Providing, Fixing, testing& Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80mm dia, flanged inlet & 63mm dia instantaneous type female outlet complete with cap and chain,twist release lug and all accessories as per IS:5290-19833 (Type-'A')and specifications complete as required . (MAKE:ESSEL/WINCO/NEWAGE)

ELECTRICAL WORKS: SCHEDULE ITEMS

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.

With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)

Medium point up to 6.00 metre. Length.

FITING AND ACCESSORIES

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

MCB IN-comer SPN DB

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.

ABB, Schneider MG, legrand, Hager make)

8 way SPN double door

MCB, MCCB, RCCB, RCBO

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

C Series(Schneider MG, legrand, Hager make)

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

C Series(ABB, Schneider MG, legrand, Hager make)

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

30mA sensitivity DP RCCB(ABB, Schneider MG, legrand, Hager make)

EARTHING

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 6 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

CEILING FAN, EXHAUST FAN AND AIR CURTAIN

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].

Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.

Domestic (USHA or equivalent make) Turbo jet Deluxe 300 mm sweep

HIGH MAST

Supplying, erection, testing and commissioning of 12 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, non-integral flood light luminaries with 1 no. 400 W HPSVT lamps and its control gear boxes (Bajaj/ Crompton/ Wipro/ HPL/ Solar/ Philips make) twin dome aviation obstruction lights of with Neon spiral lamps, control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 6 luminaries symmetrically & its control gear boxes and lightning finial. The mast shall be erected on suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth. The mast shall have an integral power tool installed inside the base compartment for its operation.(BAJAJ/ SRB/VALMONT/ PHILIPS/ PARUTHI ENGR make)

Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates.

Supply of 6 nos. non-integral flood light luminaries with one nos 400 W HPSVT lamps and its control gear boxes.

Supply of twin dome aviation obstruction lights with Neon spiral lamps.

Supply of control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor.

B. Erection

Construction of suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth with all materials and labour.

Erection of the high mast with the help of suitable equipments and Wiring of luminaries with all Wiring materials and labour.

provision of GI pipe earthing for high mast with 2.5 m long 40 mm dia GI pipe including connection as approved by the Deptt.)to high mast terminal with 25 x 3 mm GI strip with all materials and labour. ( 2 nos per mast require .

Erection of the above panel on suitable foundation including all materials and labour.

U. G. CABLE AND CABLE WORKS

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .

4.00 Sq.mm 3 Core armoured U.G. cable

10.00 Sq.mm 4 Core armoured U.G. cable

25.00 Sq.mm 3 & 1/2 Core armoured U.G. cable

50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

PVC 3 core flat submersible cable to IS: 694/1990(a)

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)

4.00 Sq.mm 3 Core U.G. cable in 25mm dia medium duty G.I. pipe

10.00 Sq.mm 4 Core U.G. cable in 40mm dia medium duty G.I. pipe

25.00 Sq.mm 3 & 1/2 Core U.G. cable in 40mm dia medium duty G.I. pipe

50.00 Sq.mm 3 & 1/2 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

G.I bend 32mm for boundary wall inclination.

CABLE KITS

Supply including fitting and fixing of 1.1 KV PVC/XLPE cable INDOOR/OUTDOOR end termination Kits (Raychem RPG make) HEAT SHRINK TYPE including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 25.00 -50.00 Sq.mm., 3/ 3.5/ 4 Core cable.

OVER HEAD LINE

Supplying including installation of 4' dia. C.I. earth pipe complete as required and as directed by the department.

DISTRIBUTION BOX

Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items. 1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no 2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos. 3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set 4. 40 Amp 4 pole ON-OFF poser contactor - 1 No. 5. Surface mounting timer switch - 1 No. 6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos 7. 0-40 Amp electro-mechanical counter display 3 Phase 4 wire electronic hybrid energy meter

NON-SCHEDULE ITEMS: Main LT Panel

Incommer:

100 A ,4P, MCCB, 36 KA - 1 No.

63 A ,4P, MCCB, 25 KA - 1 No.

100A 4P On load Changeover switch - 1 No.

Digital Ammeter - 1 Nos.

Digital Voltmeter - 1 Nos.

CT 100/5 -2 Nos.

Switch Fuse Unit - 6 Nos

Indicating Lamp 2 Sets

Bus-Bars:

200 A TPN electrolytic Copper Bus Bar of uniform cross-section (30MM x5MM) – 1 set

Outgoing:

40 A 4P MCCB 25 KA – 6 No.

25/32 A 4P MCB – 2 Nos.

25 A DP MCB - 8 Nos

Supplying with fitting and fixing Cable Junction Boxes IP 66 “halogen free and weather proof” for outdoor installation with metric knockouts for cable entry of size 139mm x 119mm x 70mm with terminals cable glands complete. The box is to be fitted on the bottom section of pole with minimum 165 mm dia 25 mm x 5mm size flat iron pole clamp complete with making necessary connection as directed consisting of the following electrical items.

12mm x 2mm x 15cm long 2 strip copper Bus Bar - 1 set

6-32 Amp "L" series DP MCB - 1 No.

6 amp "L" series SP MCB as outgoing - 2 Nos.

ENERGY METER

3- Phase Energy Meter, 530 A

Payment to be made to APDCL against load security(As per analysis)

LIGHTING

Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter, driver etc. including connection as approved by the Deptt.) with 2x4 sq mm AL. AR. cable as required and as directed by the department.

Die cast aluminium housing tempered glass diffuser Bollard IP54 (with accessories of make Jaquar Model- Orbrix Cat No. LBLD02R108XW 8 3000 or equivalent. [BLD]

LED step light with die-cast aluminum housing designed for rugged outdoor usage & IP 65 protection of make Bajaj Model- SPYKZ Cat No. 112146 BGSBL 9W LED WW Warm White or equivalent. [UPL]

LED post top made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection of make Bajaj Model CELESTA Cat No. 111538 BGCL 40W LED WH White with Decorative Pole Black painted galvanised pole in different section and gold colour painted decorative rings of make Bajaj cat No. 110397 BJPL 01 500 or equivalent [PTL]

LED Step Light LED marker offers high level of durability with high impact resistance, are easy to install and come with ingress protection. It also comes equipped with suitable mounting box. of make Philips Cat No. BWG150 LED50/WW PSU 220-240V IP67 7043 or equivalent [STP]

LED Outdoor Strip Light IP65-rated 28 W, suitable for outdoor applications with different colours and wattages 5.0 mtr roll of Phillips or equivalent [RL]

Die cast aluminium housing frosted PC di_user, IP54 Gate Light Dia: 248mm H: 300mm of make Jaquar Model Orbiss Cat LGTP01X012XW 24x0.5 3000 or equivalent [GL]

Decorative LED fixture Die casting aluminium Diffuser glass transparent Grey Colour Beam 60deg IP67 of make Jaquar Model 4641LL10H.NHG 10 X 3000 or equivalent [UL]

Die cast aluminium, 304 stainless steel ring transparent, tempered glass diffuser IP67 of make Jaquar Model DuoLight Cat LGBL05R101XW 10x1 3000 or equivalent [BL]

Surface-mounted, square panel with aluminium die cast housing of make Jaquar Model Neve Surface Cat LNVE02S018SC 18 6500 10 or equivalent [CLS]

MS LILI ENTERPRISE

Competent Infrastructure and consulting(CICON) Pvt.Ltd

Mrinal Jyoti das

PRADIP KALITA