Loading…
Loading…
Tender Value
₹4.9 Cr
EMD Value
₹9.8 L
Closing Date
10 Jul 2026, 5:00 pm
Similar tender results from the same govt authority in the past 3 years.
Improvement of Mandirhasaud(MNDH) Goods Shed.(This work primarily invoves repair of PF surface between line no. 6 & 7 and PF surface of line no.9, provision of dust screen (5.5mtr high) & sprinkler, RCC benches at PF No. 9, labour room with sufficient light fans, separate lavatory and bathroom facility for male and female labours and renovation of existing old Goods shed and replacement of damaged AC sheets.)
E-R-T-50-26-27
E-R-T-50-26-27
Open
12 Months
Pune, Maharashtra
₹0
₹9.8 L
18 Jun 2026
18 Jun 2026
26 Jun 2026
sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. // All kinds of soil. 2.27 15.00 cum 2161.20 32418.00 (-) 20.49 25775.55
watering, ramming, consolidating and dressing complete. 4.1.5 890.00 cum 6833.40 6081726.00 (-) 20.49 4835580.34 Description:- CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in
up to plinth level : // 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 6.34.2 50.00 cum 7676.30 383815.00 (-) 20.49 305171.31
bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : // Cement mortar 1:6 (1 cement : 6 Coarse sand) 13.2.2 1100.00 Sqm 324.30 356730.00 (-) 20.49 283636.02
rough side of single or half brick wall of mix : // 1:6 (1 cement: 6 fine sand) 13.2.1 30.00 Sqm 339.70 10191.00 (-) 20.49 8102.86 6 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 6 Description:- FINISHING // CEMENT PLASTER (IN FINE SAND) // 15 mm cement plaster on the rough side of single or half brick wall of mix : // 1:4 (1 cement: 4 fine sand) 5.33.1.1 2510.00 cum 8683.80 21796338.00 (-) 20.49 17330268.34 Description:- REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing
the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works upto plinth level // Concrete of M25 grade with minimum cement content of 330 kg /cum 5.33.2.1 95.00 cum 10306.20 979089.00 (-) 20.49 778473.66 Description:- REINFORCED CEMENT CONCRETE // DESIGN MIX CONCRETE // Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing
the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. // All works above plinth level upto floor V level // Concrete of M25 grade with minimum cement content of 330 kg /cum 5.9.1 450.00 Sqm 307.95 138577.50 (-) 20.49 110182.97
including strutting, propping etc. and removal of form for // Foundations, footings, bases of columns, etc. for mass concrete 5.9.3 130.00 Sqm 766.55 99651.50 (-) 20.49 79232.91
including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platform 5.9.5 180.00 Sqm 608.35 109503.00 (-) 20.49 87065.84
including strutting, propping etc. and removal of form for // Lintels, beams, plinth beams, girders, bressumers and cantilevers 5.9.6 1050.00 Sqm 804.25 844462.50 (-) 20.49 671432.13
including strutting, propping etc. and removal of form for // Columns, Pillars, Piers, Abutments, Posts and Struts 5.9.19 20.00 Sqm 814.95 16299.00 (-) 20.49 12959.33
for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. 15.2.1 1325.00 cum 2007.10 2659407.50 (-) 20.49 2114494.90
mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. // Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 6.1.2 125.00 cum 6658.25 832281.25 (-) 20.49 661746.82
of class designation 7.5 in foundation and plinth in: // Cement mortar 1:6 (1 cement : 6 coarse sand) 9.75.1 6.00 Each 273.20 1639.20 (-) 20.49 1303.33
brass door latch with necessary screws etc. complete : // 300x16x5 mm 9.74.1 4.00 Each 374.35 1497.40 (-) 20.49 1190.58
brass tower bolts (barrel type) with necessary screws etc. complete : // 250x10 mm RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 9.81.1 6.00 Each 205.10 1230.60 (-) 20.49 978.45
brass hanging type floor door stopper with necessary screws, etc. complete. 10.25.2 950.00 Kg 142.30 135185.00 (-) 20.49 107485.59 Description:- STEEL WORK // Steel work welded in built up sections/ framed work, including
structural steel etc. as required. // In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.1 1500.00 Kg 93.05 139575.00 (-) 20.49 110976.08
connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.19 3700.00 Kg 88.50 327450.00 (-) 20.49 260355.49
and washer plates complete. 12.50 4700.00 Sqm 671.55 3156285.00 (-) 20.49 2509562.20 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120
sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.51.1 60.00 Metre 450.60 27036.00 (-) 20.49 21496.32 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // Ridges plain (500 - 600mm) 13.61.1 1200.00 Sqm 131.45 157740.00 (-) 20.49 125419.07
manufacture to give an even shade : // Two or more coats on new work 13.47.1 400.00 Sqm 162.35 64940.00 (-) 20.49 51633.79
exterior paint with Silicone additives of required shade: // New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 13.41.1 600.00 Sqm 162.55 97530.00 (-) 20.49 77546.10
and manufacture to give an even shade : // New work (two or more coats) over and including water thinnable priming coat with cement primer 13.81.2 600.00 Sqm 90.05 54030.00 (-) 20.49 42959.25 Description:- FINISHING // Distempering with 1st quality acrylic distemper, having VOC (Volatile
including applying additional coats wherever required, to achieve even shade and colour. // Two coats 13.111.1 700.00 Sqm 111.60 78120.00 (-) 20.49 62113.21 Description:- FINISHING // Applying priming coats with primer of approved brand and
Smooth exterior paint of required shade : // Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 13.26 450.00 Sqm 214.30 96435.00 (-) 20.49 76675.47
mm thickness over plastered surface to prepare the surface even and smooth complete. 16.79 2500.00 cum 2803.65 7009125.00 (-) 20.49 5572955.29 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Description:- ROAD WORK // MISCELLANEOUS // Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification
with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. 16.3.10 300.00 cum 888.30 266490.00 (-) 20.49 211886.20 33 Description:- ROAD WORK // ROADS // Supplying and stacking at site. // Moorum 9.119 40.00 Metre 408.25 16330.00 (-) 20.49 12983.98 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of
brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. 9.120.1 15.00 Sqm 2455.10 36826.50 (-) 20.49 29280.75 Description:- WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45
mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. // 30 mm thick plain PVC door shutters 8.31 30.00 Sqm 1063.45 31903.50 (-) 20.49 25366.47 Description:- CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of
by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.37 15.00 Sqm 935.60 14034.00 (-) 20.49 11158.43 Description:- FLOORING // CERAMIC GLAZED TILES // Providing and laying Ceramic glazed floor
to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41A.1.1 85.00 Sqm 1286.60 109361.00 (-) 20.49 86952.93 Description:- FLOORING // VITRIFIED FLOOR TILES // Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20
kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. // Double charge vitrified tile polished finish of size // Size of Tile 600 x 600 mm 18.10.3 50.00 Metre 491.20 24560.00 (-) 20.49 19527.66
fittings and clamps, i/c cutting and making good the walls etc.-Internal work - Exposed on wall // 25 mm dia nominal bore 18.12.3 200.00 Metre 417.95 83590.00 (-) 20.49 66462.41
fittings including trenching and refilling etc.-External work // 25 mm dia nominal bore 18.12.6 200.00 Metre 654.20 130840.00 (-) 20.49 104030.88
fittings including trenching and refilling etc.-External work // 50 mm dia nominal bore 12.41.2 36.00 Metre 319.75 11511.00 (-) 20.49 9152.40 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Description:- ROOFING // Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of
Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 110 mm diameter 12.42.5.2 15.00 Each 132.00 1980.00 (-) 20.49 1574.30 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/
jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Bend 87.5 degrees // 110 mm bend 12.42.4.2 10.00 Each 190.75 1907.50 (-) 20.49 1516.65 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/
jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Single tee without door // 110x110x110 mm 17.13.2 4.00 Each 2758.20 11032.80 (-) 20.49 8772.18
squatting pan (Indian type) : // Orissa pattern W.C. pan of size 580x440 mm 10.2 45500.00 Kg 111.95 5093725.00 (-) 20.49 4050020.75
trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.6.1 50.00 Sqm 3008.80 150440.00 (-) 20.49 119614.84 Description:- STEEL WORK // Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the
arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. // 80x1.25 mm M.S. laths with 1.25 mm thick top cover 17.23 11.00 Each 1382.30 15205.30 (-) 20.49 12089.73
wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 17.2.1 2.00 Each 5540.55 11081.10 (-) 20.49 8810.58 Description:- SANITARY INSTALLATIONS // Providing and fixing white vitreous china pedestal
cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid 17.28.1.1 7.00 Each 90.95 636.65 (-) 20.49 506.20
wash basin including P.V.C. waste fittings complete. // Semi rigid pipe // 32 mm dia 18.7.2 36.00 Metre 325.10 11703.60 (-) 20.49 9305.53 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl
brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall // 20 mm nominal dia Pipes 18.7.3 15.00 Metre 408.55 6128.25 (-) 20.49 4872.57 Description:- WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl
brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall // 25 mm nominal dia Pipes 18.62.1 6.00 Each 161.55 969.30 (-) 20.49 770.69
PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. // 15 mm nominal bore, 105 mm long, weighing not less than 138 gms 18.52.1 10.00 Each 594.75 5947.50 (-) 20.49 4728.86
(concealed) of standard design and of approved make conforming to IS:8931. // 15 mm nominal bore 17.7.4 5.00 Each 1679.60 8398.00 (-) 20.49 6677.25 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Description:- SANITARY INSTALLATIONS // Providing and fixing wash basin with C.I. brackets, 15 55 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 5.12 60.00 cum 9673.50 580410.00 (-) 20.49 461483.99 Description:- REINFORCED CEMENT CONCRETE // PRE-CAST RCC // Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses,
required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Per bag of 4.12 120.00 cement of 57.15 6858.00 (-) 20.49 5452.80 50kg 57 Description:- CONCRETE WORK // DAMP-PROOF COURSE // Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. 17.73.2 6.00 Each 600.35 3602.10 (-) 20.49 2864.03 Description:- SANITARY INSTALLATIONS // Providing and fixing PTMT towel rail complete with
approved quality and colour. // 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 18.15.1 10.00 Each 303.85 3038.50 (-) 20.49 2415.91
C.I. wheel of approved quality (screwed end) : // 20 mm nominal bore 12.47.1 200.00 Sqm 1179.25 235850.00 (-) 20.49 187524.33 Description:- ROOFING // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including
but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. // 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified 15.3 80.00 cum 2928.10 234248.00 (-) 20.49 186250.58
mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () B-Execution of all works connected with above work covered under SEC 181175.00 Below/P Railway USSOR 2021(Formation Works, Bridge Works and P. Way Works) ar
including lead up to 50 metres and lift up to 5 metres. In Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer.
Description:- Unloading of rails of any section and length up to 13 metre, in neat manner for
including lead up to 50 metre, lift up to 5 metre and stacking in prescribed manner. From Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer.
RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Description:- Loading of 52kg / 60kg PSC normal line and special sleepers up to 2.75 metre length
(DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. In Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer
Description:- Unloading of 52kg / 60kg PSC line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental
crossing of one track and lead up to 250 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. From Truck / Trailer
Description:- Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road
points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead up to 5 Km S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () C-Execution of all works connected with above work covered under SEC Above/ Railway USSOR 2010 and Vol. I & II of IR unified standard specification (Works & 207283.60 Below/P materials) ar
surplus earth from foundations including 50m lead and 1.5m lift
Cement Mortar 1:4 (1 cement : 4 fine sand)
Description:- Hiring of JCB Machine (in good working condition) for leveling and dressing ground /
JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site.
approved make with all approved make with all approved fittings(IS:7834) such as Tee, bends, union, elbow, plugs, reducer, cowels etc. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () D-Execution of all works connected with the above work covered under 188610.00 Below/P Schedule-D. ar NS 25.00 Sqm 7296.00 182400.00 AT Par 182400.00 Description:- Supply, erecting and fixing of Retro-reflective Board made with HIP grade retro
supported with 37x37x3mm angle frame and diagonally with same angle along with arrangement for fixing at site including nuts & bolts (minimum 10mm dia) complete. Running NS 15.00 414.00 6210.00 AT Par 6210.00 Metre
approved make with all approved make with all approved fittings(IS:7834) such as Tee, bends, union, elbow, plugs, reducer, cowels etc.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-AEngg.Org._.pdf
ATTACHMENT
Annexure-BPlantMachinery.pdf
ATTACHMENT
Annexure-CWorkinHand.pdf
ATTACHMENT
Annexure-W.pdf
ATTACHMENT
AnnexureJ-11-1.pdf
ATTACHMENT
Annexure VIA
ATTACHMENT
SCC121-12-2021-2023New.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
Annexure-EEFTdetail_R-1.pdf
ATTACHMENT
AnnexureI-Icommunicationdetails.pdf Annexure I
ATTACHMENT
CE16Revised2023-1-111.pdf
ATTACHMENT
PCECircular31-1-171.pdf
ATTACHMENT
GCC2022uptoACS11_compressed.pdf GCC 2022 upto ACS11
ATTACHMENT
AnnexureI-Icommunicationdetails.pdf
ATTACHMENT
GCC2022uptoACS11_compressed.pdf
ATTACHMENT
AnnexureVIABidsecurityformat-1-2new.pdf
ATTACHMENT
Download all tender documents and submit your bid