SPL REPAIR TO BLDG NO P-1 AND TOILET BLOCK OF BLDG NO P-21A AT JALAPAHAR UNDER AGE (I) DARJEELING

Amount

Taking down of cement plaster of any description including racking out of joints complete all as directed

M&L for rendering 10 mm thick in CM 1:6 on fair faces of bricks work or concrete surface (internally) including finished, even and smooth without using extra cement complete.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of bricks work or concrete surface (externally) mix with WPC @ 3% per weight of cement finished, even and smooth as complete. Note: WPC should be measured seperately and used as per manufacture instructions

M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3and rendering is to be finished even and smooth with out using extra cement

Supply only water proofing compound (WPC) of approved make

M&L for prepartion of new plastered surfaces of wall applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

M& L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistane as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additive @ 1.43 ltr/Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/Sqm over new surface, all as specified and as directed.

M&L Preparing New ceiling and applying three coats of colour wash complete as specified and as directed.

Dismentalling of floor, hearth or wall tilling including cement morter bedding and rubbish off the all premises complete.

M&L for Glazed ceramic coloured tiles 7 to 8mm thick (600X600mm) in floor, over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L for Glazed ceramic coloured tiles size as above in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M & L for Glazed ceramic tiles of 450x350x7mm thick tiles on vertical surface set and jointed in neat cement slurry and point in white or coloured cement to match, over backing coat in CM 1:3, 10mm thick as specified.

M&L Non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm 7mm thick coloured tiles in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over screed bedding 15mm thick in CM 1:6 all as specified.

M & L for Non-skid ceramic tiles 7 to 8mm thick (square/reatangle) area of each exceeding 0.11 sqm but not exceeding 0.18 sqm in floor surface set and jointed in neat cement slurry and point in white or coloured cement to match, over screed bed of 15mm in CM 1:6 as specified.

M&L for machine cut mirror polish kota stone slab flooring 18mm thick over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed.

M&L for machine cut mirror polish kota stone slab in skirting, riser in steps and dado 16mm thick over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete all as specified and as directed.

M&L of Marble tiles 30cmX20cmX20mm thick machine cut, bedded and jointed withgrey cement slurry including cutting and polishing including mirror polishing complete including 15mm thick screed bed.

Demolition of ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs/blankets any thickness including cover fillets as specified.

S&F aluminium anodised snap grid frame work of size 605mm X 605mm framework for ceiling with aluminium tee section of size 23.5mm X 26.4mm X 1.4mm thick and aluminium angle section of size 36.5mm X 25mm X 1.4mm thick, for false ceiling incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long incl 4mm thick non asbestos E-board, HSPC fixed to frame complete all as specified.

Demolition of bickwork or stone/bounder masonry, built in cement mortar including all quoins, arches, pillers etc but excluding ashlar facing, dressed stonework and precast.

M/L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6, complete all as spd and directed.

M & L brick work with sub class -B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4.

Taking up or down 15mm dia steel tubing and connection,including cleaning , for refixing or removal.

S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as directed.

Taking up or down 20mm dia steel tubing and connection , including cleaning , for refixing or removal.

S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors as directed.

S & F of 15mm dia CPVC Pipes & fittings on walls/ceiling or laying in floors complete all as specified.

S & F of 20mm dia CPVC Pipes & fittings on walls/ceiling or laying in floors complete all as specified..

Cutting chase, pinning in making good to facing whre required and pointing in CM 1:3 to ends or edges of landing and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting n exc 10cm.

S&F in repair Wall Mixer with non-telephonic chromium plated cast copper with approved make CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia. complete.

S & F of 15mm dia Bib cock chromium plated cast copper with approved make CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia complete.

S&F in repair Bib cock chromium plated cast copper with approved make CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia.

S&F in repair Stop valves fancy type, chromium plated with long shank and cup concealed type high pressure with crutch or butterfly handle ,screwed both end for iron pipe or for union and fixed 15mm bore dia.of pipe as directed.

M & L for PVC connection 15mm dia with PTMT nuts of length 600mm

S & F of 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F in repair vitreous China water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe ) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and as directed.

S & F in repair PVC 10 Ltr capacity valve less, low level flusing cistern symphonic action white with inlet ball valve, float and handle including brackets and wash down pipe complete.

S & F Vitreous china wash basin white flat back, size 450x300mm excluding tap waste but incl bracket and incl cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed.

M&L waste fittings 32mm dia brass chromium plated for glazed ware basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end as specified.

S & F PVC waste pipe 32mm dia suitable length for WHB/Sink

S&F in repair Fancy type Basin Mixture table mounted with copper pipe chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks, and fly nuts screwed for iron pipe and fixed as specified.

S&F Kitchen stainless steel plate rack of size 31"X30"X10" of approved make incl necessary fixing/fitting & making good the existing surface complete all as specified and as directed.

S & F tubular towel rail 20mm dia 'D' Type 60cm between flanges of brass chromium plated all as specified and directed.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement motar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330 x 160mm complete all as specified.

S & F of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm with shutter (without taking off shutter from frame) all as specified and removing from site and as directed.

Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking off shutter from frame) all as specified and removing from site.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drg.

S & F factory made uPVC door frame made of uPVC. Extruded section having an overall dimension (estruded section profile) 48x40mm (tolerance + 1mm), with wall thickness 2.0mm (+ 0.2mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S tube of size 19x19 mm and 1mm (+ 0.1mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engr-in-Charge.

S & F 24mm thick factory made PBC door shutters to existing door frames mader of styles and rail of a uPVC hollow section of size 59x24mm and and wall thickness 2.00mm (+ 0.2mm),with inbuilt edging on both sides. The stules and rails mitred and jointed at the corners by means of M.S galvanized/ plastic brackts of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S tube of size 20x20mm and 1mm (+ 0.1mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24mm and 2mm (+ 0.2mm) wall thickness, fixed to the shutter styles by means of plastic/galvaised M.S. 'U' cleats. The panels filled verticallly and tie bar at two places by insering horizontally 6mm galvanised comlete as specified by the manufacturer and as per directions of Engr-in-charge.

M&L for PCC (1:3:6) type C1 ( using 20 mm graded aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface even and smooth complete all as specified and directed .

S & F for 32mm bore dia of Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete.

S & F of Vitreous china half stall urinals, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with bracket, flush pipe, grating and union ofr discharge pipe.

S & F of Vitreous china urinal partition white slab of size 700x310mm terminating about 40cm above floor line complete all as specified and directed.

Dismentalling of plain or currugated steel sheeting any guage, thickness, including nanital or similar patter in roof coverings complete

S & F Pre-painted galvalume aluminum zinc coating GI base corrugated sheet 0.05mm thick of colour having tensile strength of 550Mpa as in roof covering/wall cladding, fixed with self tapping scres as specified.

All as per item 59 here in above, but plain sheeting, complete all as specified and as directed.

Dismentalling of wrought iron or mild steel work of any description not otherwise provided

S&F framed work such as grills gratings, etc. with end of bars shouldered and/or riveted, or forged into spikes; framed guard bar; barred iron doors; ladders; frame of cupboard; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290.Gde-E-165

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick (below or above ground level) as specified.

M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection and paving finishing the surface even and smooth without using extra cement as specified and as directed.

M&L forming 12mm thick expansion joint filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B' for 75mm thick slab

S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) work conforming to Fe-290, Gde E-165 and including distance pieces, cleats etc.

S&F pressed steell door frame 105x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (pcc filling of holloow section measured and paid seprately)

S&F 35mm thick 2nd class hardwood rail and style Factory made plain frames, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-1), kiln seasoned and chemically treated : supplied and fitted to chowkhats as specified.

M&L in repairs 18/19 mm thick prelaminated particle board for cupboard, Kitchen Cabinet exterior grade, prelimated one sides with decorative choice lamination & other side balancing white lamination and fixed with screws to iron frame work including teakwood lipping 6 mm thick fixed with nails.

S&F 100mm hasp and staple, mild steel, wire type, stove enamelled black, incl bolt to hinge plate and fixed with screws all as specified and as directed.

S&F for Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.

M&L 2nd class hardwood in plain fillets, square rectangular or traingular in section, clean sawn, secured with nails or brads sectional area not exc 3 sqcm complete all as specified and as directed.

M&L for Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction.

S&F 4.80mm thick sheet glass ordinary quality and glazing with oil putty and wooden beads in square n.exe 0.50sqm in each pane all as specified.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

M&L PCC type C-1, 1:3:6 (20mm graded stone aggt) for cills, hold fast filling of hollow of pressed steel door frame, drains etc.

S&F 100mm size butt hinges medium weight cold rolled mild steel all as specified and as directed by Eng-in-Charge.

S&F 75 mm size butt hinges medium weight cold rolled mild steel all as specified and as directed by Eng-in-Charge.

S&F 150 mm size aluminium handle cast type anodised complete.

S&F 100 mm size aluminium handle cast type anodised complete.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of old painted surface applying a coat of synthetic enamel paint on steel surface over 10cm grith.

M & L for preparation of New surface applying two coat of synthetic enamel paint over one coat of red oxide on steel surface over 10cm grith.

S&F in reapir Harrison rail, mild steel, chromium plated with fixing bracket, stops, rollers etc. complete all as directed.

S&F 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc complete as specified and directed.

S & F vitreous china shoap tray embedded in the wall complete

Dismantling water tanks and removing to store capacity exc 500 ltr but n exc.1000 ltr complete

S & F rotational moulded plyethylene water storage tank consisting of three layer cylinderical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000ltr

S&F Ball valave high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed 20mm dia (Min weight 142 gms) as specified.

S&F in repair 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for Iron pipe

S & F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal fitting and jointing to waste pipe

S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal fitting and jointing to waste pipe

S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete.

S&F 75mm bore PVC (SWR) bends with oval access door all as specified and as directed.

S&F 110mm bore PVC (SWR) bends with oval access door all as specified and as directed.

S&F 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof all as specified and as directed by Eng-in-Charge.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.

S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete.

S & F 110mm bore PVC (SWR) bend complete.

M & L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.

S & F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F of 180mm PVC (SWR) half round gutter drain pipe complete as specified.

S & F of 180mm PVC (SWR) joint socket as in gutter drain pipe complete as specified.

S & F of 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe complete as specified.

S & F of 180mm PVC (SWR) pipe clamp complete as specified.

Dismantling posts or struts in normal ground (wood,steel or RCC) any section, including taking out embedded portion and making good disturbed ground.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil as per specification.

Dismantling fencing wire mesh any type .

M&L PCC 1:3:6 type C2 (using 40mm graded aggregate) in fdn, filling and mass concrete as in fencing post etc as specified.

M&L for fencing post (ISA65X65X6mm) including embeding in concrete and screwing etc. wind ties, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all as specified and as directed.

M&L for preparation of steel surfaces n exc 10cm width or grith and applying two coats of synthetic enamel paint over one coat of zinc chrome primer complete all as specified and directed..

Supply only chain link MS galvanised fencing including wire mess size 4mm dia and nominal pitch of wire 100X100mm .

Fixing only chain link fencing incl line wires any mesh, size and type to any type of standards, rails staining bolts etc incl provn of binding wires as specified and as directed by Eng-in-Charge.

S&F for in repairs galvanised strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provn of galvanised mild steel specified.

S&F 10mm dia MS rounds bars provided in between fencing post to support chain link fencing incl necessary cutting, bending and hooking etc as required and directed by Engr-in-charge.

S&F MS screw bolts (machine made)with hexagonal or square heads at one end and screwed the other,each screwed end to be fitted with washers and one hexagonal or square nut, n exc 50mm long(dia of neck 5 to 10mm) complete all as specified.

M&L for Chequered cement concrete tiles 30cmX30cmX20mm thick set and jointed and pointed with grey cement and pig ments in neat cement slurry in floors including 15mm thick secreed bed in CM 1:6 set and jointed and pointed in neat cement slurry as directed.

M&L PCC type B1 1:2:4 (20mm graded aggregate) copings, kneelers, apex stones, bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed.

M & L for 100mm thick PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in flooring & finishing the surfaces rough to receive screed bed complete as specified.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete fittings such as switches,ceiling roses, pendents, regulators, sockets,etc (excluding Light Fitting), removing materials from site and making good disturbed surface of walls & floors etc.

Taking down DB's including MCB's etc all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces.

M&L for Point wiring concealed type with PVC insulated un-sheathed FRLSH stranded copper conductor cable of nominal dia 1.5 Sq mm (For Phase- Red/ Yellow/ Blue, For Nutral - Black, For continuous Earth connected to mail earth dolly- Green) one light /Fan/Bell point suitable for one 5 Amp switch one way including factory made GI concealed box suitable for switch/ socket etc ISI marked and making good disturbed surface of walls/ceiling & floors etc complete all as specified and directed. [Note- Switches, Sockets, Ceiling roses, holders, light fittings shall be measured and paid separately. Wiring shall be combination of desired circuits as directed at site. Sharing casing capping shall be as per IS Spcn.]

M&L for Point wiring with PVC insulated un-sheathed FRLSH stranded copper conductor cable of nominal dia 1.5 Sq mm (For Phase- Red/ Yellow/ Blue, For Nutral - Black, For continuous Earth connected to mail earth dolly- Green) with and including PVC casing caping of size 25X16 mm for one light /Fan/Bell point suitable for one 5 Amp switch one way including MS sunken box of thickness 1.6mm duly flushed into the wall and including laminated hylam sheet cover of thickness 3mm & and making good disturbed surface of walls/ceiling & floors etc complete all as specified and directed. [Note- Switches, Sockets, Ceiling roses, holders, light fittings shall be measured and paid separately. Wiring shall be combination of desired circuits as directed at site. Sharing casing capping shall be as per IS Spcn.]

All as per item No. 133 here in above but for for two way point wiring complete all as specified and directed.

All as per item No. 133 here in above but for for one 3/5 Pin, 5 Amp socket outlet on the independent board complete all as specified and directed.

All as per item No. 133 here in above but for one 3/5 Pin, 5 Amp socket outlet with other switches on the Same board complete all as specified and directed.

All as per item No. 132 here in above but for one 3/5 Pin, 15 /16Amp socket outlet on the independent board witth 2.5 sq.mm size cable for phase, Nautral and earth and size of cashing capping 25x20 mm ISI mark board complete all as specified and directed.

M&L for Power Point wiring from DB with PVC insulated un-sheathed FRLSH stranded copper conductor cable of nominal dia 2.5 Sq mm (For Phase- Red, For Nutral - Black, For Earth- Green) with and including PVC casing caping of size 25X16 mm for one 15Amp power point suitable for one 15 Amp switch socket ouplet/ switch socket combination including MS sunken box of thickness 1.6mm duly flushed into the wall and including laminated hylam sheet cover of thickness 3mm & and making good disturbed surface of walls/ceiling & floors etc complete all as specified and directed. [Note- Switches, Sockets, SS combination shall be measured and paid separately, Sharing casing capping shall be as per IS Spcn.]

M&L for modular switch one way 6/10 Amps, 1 module, 240 Volts, all as specified and directed.

M&L for modular socket, 6Amps / 16Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed.

M&L for modular switch one way 16 Amps, 1 module, 240 Volts, all as specified and directed.

M&L for modular blank plate, 1 module, 240 Volts, all as specified and directed.

M&L for modular blank plate, 4 module, 240 Volts, all as specified and directed.

M&L for modular blank plate, 3 module, 240 Volts, all as specified and directed.

S & F Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volts complete all as specified and directed.

S & F Switch Piano, flush type, single pole, two way, 5 Amps, 230 Volts complete all as specified and directed.

S & F Bell Push Flush type 5 Amp, 240 volt complete all as specified and directed.

S & F Bell Ding-Dong AC 230 V Single Pole complete as dircted complete all as specified and directed.

S & F Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts complete all as specified and directed.

M & L for Socket outlet 3 Pin, 6 Amp flush type, 240 volts complete all as specified and directed.

S & F Switch Socket combination 2 in 1, 5 Amps, 5 pin multipurpose, flush type, 230 Volts complete all as specified and directed.

S & F Switch Socket combination 2 in 1, , 3 Pin, 5 and 15 Amps, multipurpose, flush type universal , 230 Volts complete all as specified and directed.

S & F Socket outlet 2 in 1,3 pin 5and 15 Amp , flush type, 230 Volts complete all as specified and directed.

S & F Switch Piano, flush type, single pole, one way, 15 Amps, 230 Volts complete all as specified and directed.

Supply and fix Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S & F LED Plus bulb 9 Watt B22 CDL 1 S lamp V7 for holder complete all as specified and directed.

S & F in repair wall mounted LED Tube light fitting 20 Watts surface mounting general purpose LED Batterns in Extuted Aluminium housing including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including complete all as specified and directed.

S & F in repair wall mounted LED Tube light fitting 10 Watts surface mounting general purpose LED Batterns in Extuted Aluminium housing including making connections with 2 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site on 02 Nos new round blocks including complete all as specified and directed.

Supply and fix in repair decorative wall mounting Floretine WL 1 LS B22 SS brushed nickle finish with opal glass diffuser suitable with 9 Watt LED lamp B22 base incl suitable mounting box complete all as Specified and directed. Make: Havells/Crompton/Bajaj.

S & F in repair sleek LED Bulk head IP-66, fitting 10 watt suitable for outdoor and indoor areas in perfect synchronization with functionality and aesthetics incl suitable mounting PVC boxes complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm PVC (FRLSH) insulated multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing capping medium grade ISI marked of required size 25x16mm with and including PVC insulated 6.0 Sqm single core single stranded copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed Note: Three run of 6Sqmm copper wire PVC Conduit will be measured and paid one unit.

S & F in repair of Sheet Metal Enclouser Double door DB 415 volts, 4 way with rated bus bar Three pole & neutral (TPN) fixing on suitable rectanguler block, duly connected incoming and outgoing wires in DB and good finish to the old disturbed surface complete all as specified and direceted.

S & F in repair MCB, 63 Amp, TPN breaking capacity 10KA, 415 Volt, 50 Hz and current capacity in the DB complete all and specified and directed.

S & F in repair of Sheet Metal Enclouser Double door DB 240 volts, 12 way with rated bus bar Single pole & neutral fixing on suitable rectanguler block, duly connected incoming and outgoing wires in DB and good finish to the old disturbed surface complete all as specified and direceted.

S & F in repair MCB Single Pole Neutral C Curve 230 volts of capacity 32 Amp 10 KA and current capacity in the DB complete all and specified and directed.

S & F in repair MCB Single Pole of Cap 6-32 Amp, C Curve 240 volts 10KA and current capacity in the DB complete all as specifeid and directed.

Taking down 25 Ltrs Geyser and fitting from its existing position and refixing at the same/new position duly completeing of B/R Work such as plaster, plumbing and wall painting etc complete all as spcified and as directed.

S&F in repair LED bed side light white in colour 7 watt lumen output 400 Lm including suitable mounting box and making connections with 2 core flexible copper wire 0.50 Sq mm Complete all as specified and as directed by Engr-In-Charge. Make Philips Cat no 31437 or equivalent in Surya/Crompton/Panasonic.

S & F in repair LED Building Security light fitting 30 watt energy saving environmental friendly long life LED Street light made up pressure die cast aluminium housing with high efficiency LEDs complete with fixing arrangements all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, under groung cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, all as specified and directed.

Returning filling in soft / loose soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed.

Removal of surplus excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point, complete all as specified and directed.

Supply and laying in tranches, fixed to wall/pole DWC pipe (Double wall corrugated) of dia 150 mm for Carrying UG cable or as and where directed complete all as specified and directed.

M&L for 40mm dia steel tubes (light grade) galvanised with all fittings, laid in trenches/wall/pole/road crossing for protection of underground cable/ earth strip, all as specified and directed.

Supply, Laying & testing cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 25 Sqmm, complete all as specified and directed.

Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates. Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount.

Darjeeling Enterprises (BID ID -3509163)

RAI CONSTRUCTION (BID ID -3509414)

THUKKEPA & PANGDOK (BID ID -3513023)

BHASKAR PRADHAN (BID ID -3511280)

JALAPAHAR HARDWARE (BID ID -3511014)

BIMAL BHATTRAI (BID ID -3511285)

TSHERING WANGYAL BHUTIA (BID ID -3508946)