Detailed Design, Supply, Installation, Testing, Commissioning and Operation and Maintenance for 5 years of the Facade Illumination work of Saryu Bridge, Ayodhya, Uttar Pradesh.

SITC of 1000mm long rigid architectural RGBW (W-4000K)/Tuneable WH LED Linear light operating at 24V DC & housing made of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted +95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The fixture shall have 25°X40° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 36W, Fixture must have operating temperature range of -10°C to 50°C. Frequency 50/60Hz. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only (multi chip & 4 in 1 type not allowed). The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tuneable CCTs (3000k -6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.

SITC of 1000mm long rigid architectural RGBW (W-4000K)/Tuneable WH LED Linear light with integral driver & housing of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire width shall be 45mm & height of 55mm without brackets. The luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The nominal weight of the luminaire shall be 3.5KG (±10%). The fixture shall have 25°X40° beam angle & the lens shall be made of anti- aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDS shall have minimum CRI ≥80 & shall have SDCM4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 50W.Fixture must have operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only (multi chip & 4 in ! type not allowed)The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire Phall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tuneable Cr's (3000k -6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.

SITC of Circular shape architectural RGBW (W-4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy- ADC12. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The fixture shall have 3°-3.5°/10°/15°/30°/45°/60° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI 280 for white light & shall have SDCM<4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 50W. Fixture must have operating temperature range of -10°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz LED make shall be CREE/NICHIA/OSRAM/LUMILEDS only (multi chip & 4 in 1 type not allowed). The luminaire shall have class I insulation. The lurninaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W-4000K) to produce 16.7million colours or Dynamic tuneable CCTS (3000k -6500k). Bidder to ensure Luminaire, Driver, controller & accessories of same make to avoid any distrust & after sales service. The luminaire shall be capable of digital dimming of 65536 steps. The bidder shall submit the online product link for data sheets/parameters. RoHS Compliance alone with CE certificate, luminaire BIS certificate shall be uploaded along with technical bid. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.

Supply, Installation, Testing and Commissioning of 2700 - 3000 K LED non-integral flexible strip luminaire of 5m length with system wattage in the range of 10-13 W/m with SDCM ≤4 Lifeclass should be at least 30,000 burning hours at L70@35deg C. Luminaire should comply IP68. Operating temperature should be in the range of -40deg to 50deg C. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling, Loading/unloading, security, upkeep and operation & maintenance for 5 years including replacement, rectification, programming of faulty luminaires etc.

Supply, Installation, Testing and Commissioning of Content Program Controller with Perfect fit for small and medium size applications,Supports DMX512 Supports up to 3 DMX universes, Output signal is DMX (no need for sub-controllers), Can amplify the DMX signal in cascaded connection, LCD screen display and remote control, SD card slot to store scene and automatically play then when turned on, Supports automatic playback scheduling, with Al housing, Memory Card Capacity Max 32gb, Not Weight 1 55 Kg. Temperature Range -30°C to 50°C, IP20, Fixture shall be complaint with CE, CB, RoHS

Planning, Designing, Programming of all the light fixtures with integration into controller and making multiple programming in total of 5 different occasion Synchronizing all fixtures into one.

Supply. Installation, Testing and Commissioning of for Splitter for converting one port into minimum 6 Ports for connecting multiple fixtures on each circuit

Supply, Installation, Testing and Commissioning of DMX Addressing required for programming, addressing of the fixtures.

Item Description

Sapply installation commissioning of following sizes of power and data cable as mentioned:

3x2.5 sqmm Cu unarmored multistrand

5x6 sqm Cu unannored multistrand

2 x 10 sqmm Al Armoured

4 x 16 sqmm Al armoured

3.5 x 35 sqmm Al armoured

3.5 x 95 sqmm Al amrd

Data cable Cat 6

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth.

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection

95 sqmum

Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer Gl pipe of 16 swg and inner Gl pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity

S&F of 40 Amp. 4 Pole. Isolator

S&F of 6 Amp to 32 Amp DP MCB (10 KA) C Curve

8 Cable Entry Junction Boxes IP66 HENSEL cat Ref DK0606

Cable Entry Junction Boxes IP66 HENSEL car Ref KF3535 B

10 Synthetic Glands with Lock Nut Cat ref: 1545.25.17+8220.40

Fabrication of MS Clamp for mounting and suspension of fixtures over the bridge along with an enclosure to avoid damage of the fixture

Supply, installation, testing and commissioning of PVC Pipe of size 20 mm as per requirement for cable layingand its protection.

Supply, installation, testing and commissioning of PVC Pipe of size 40 mm mm as per requirement for cable layingand its protection.

Supply, installation, testing and commissioning of Electrical panel with Servo Bypass swith on incomer having 250 A MCCB with Surge Protection Device for all phases with minimum 6 No outgoing of 63A 4P MCCB A compartment having two switches for safekeeping the controller and other necessary equipments

Supply, installation, testing and commissioning of Oil Cooled Servo Stabilizer of 75 KW Three Phase with Enclosure and connection to the main panel. with rating of 180-250 V stabilizong and maintaining a fixed voltage output of 220Volt for the entire system

ORIENT ELECTRIC LIMITED (BID ID -4738147)