Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹23.8 LAccepted-AOC 10 AISHWARYA 1ST FLOOR 2ND CROSS ANNAYAPPA GARDEN NEW THIPPASANDRA HAL HAL III STAGE BANGALORE 560075 | BENGALURU URBAN | KARNATAKA | 560075 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹27.5 LRejected-Finance 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | SECOND | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
14 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
PROVISION OF CERTAIN SANCTIONED WORKS AT IAM VISHWA VIHAR AND ASTE UNDER GE AF MARATHAHALLI BANGALORE
2023_MES_621693_1
8654/E8
Open Tender
Civil Works
Works
180 days
GE AF MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹50,000
Yes
19 Dec 2023
5 Oct 2023
19 Nov 2023
5 Oct 2023
14 Nov 2023
26 Oct 2023
Amount
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc including removal of debries outside MOD Land complete all as specified and directed.
M&L for Pre-cast cement concrete block masonary laid in cement mortar (1:4) type B-1 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.
M & L for rendering 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement etc all as specified and directed by Engineer-in-charge.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strips of 20mm width stuck inside with solven cement for styles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete
S & F butt hinges 125mm size extruded aluminium alloy with galvanised mild steel hinge pin,anodised, complete all as specified and directed.
S & F in repairs aluminium handles 150 mm size cast type anodised complete all as specified and directed.
S & F Aluminium anodised bolts barrel tower bolts 200 mm long of extruded section complete all as specified and directed.
M&L for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in floors etc. all as specified and directed by Engineer-in-charge.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:4 etc all as specified and directed by Engineer-in-charge.
S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:3 etc all as specified and directed by Engineer-in-charge.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide all as specified and directed by Engineer-in-charge.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) all as specified and directed by Engineer-in-charge.
M&L TMT mild steel bar 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.50 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed by Engineer-in-charge.
M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15 mm thick 1:4 cement mortar complete all as specified and directed.
M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15 mm rendering as in backing coat in cement mortar 1:4 complete all as specified and directed.
S&F Vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device complete all as specified.
S&F PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe or lever of any size and pattern with inlet ball valve float and handle fixed to pedestal pattern water closet pan including all joints , etc complete of approved makecomplete all as specified.
S& F in repairs , Vitreous china urinals, half stall type, incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass srews, pointing around urinal back in cement; flush pipe , grating and union for discharge pipe, complete all as specified and directed.
Supply and fix vitreous China wash basin, white, flat back, size 630 x 450mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.
S&F waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed.
S&F 15mm bore Pillar taps, fancy type cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F stop valves 15mm ,fancy type cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron piipe or unions and fixed complete all as specified and directed.
S&F 15 mm dia bore fancy type chromium plated bib taps screwed for iron pipe, or for brass ferrule complete all as specified and as directed.
S&F Grating square 150mm dia of PTMT(Minimum weight 100 gms) complete all as specified and directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved qualitycomplete all as specified and directed.
S&F in repairs two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge
Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.
M & L PVC floor trap with grating including jointing with solvent cement, 75 mm bore dia outlet complete all as specified and directed.
S&F in repair soap dish (Any Type) fixed to plugs/walls with brass chromium plated screws complete all as specified and directed.
S&F in repair 20 mm dia 'D' type chromium plated towel rail 600 mm long between flanges complete all as specified and directed.
S & F PVC waste pipe, 32 mm dia for WHB or sink, complete all as specified and directed.
S & F in repairs PVC waste pipe for urinal, complete all as specified and directed.
Supplying and laying of CPVC 16 mm bore pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified , complete all as directed by Engr-in-Charge.
Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store all as specified and directed.
S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and as directed.
S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and as directed.
S&F 110 mm bore of pipe PVC (SWR) P trap of any radius / shoe fixed to PVC pipes complete all as specified and as directed.
S&F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed.
S&F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed complete all as specified and directed.
S&F 75 mm bore of pipe PVC (SWR) junction single T of any radius / shoe fixed to PVC pipes as directed complete all as specified and directed.
S&F in repairs rotational moulded polythylene water storage tanks 500 ltrs capacity, ISI MARKED (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge
S&F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge
M&L for preparation of new plastered/cemented surfaces/undecorated surfaces and applying two coats of Synthetic enamel paint over a coat of priming on walls etc. complete all as specified.
M & L for preparation of old surface and applying one coat of oil bond distempering on walls complete all as specified and directed.
M & L for preparation of old surface and applying one coat of white washing paint on ceiling complete all as specified and directed.
M&L Framed work such as grills, gratings etc with ends of bars shouldered and /or riveted or froged into spikes framed guard bars confirming to Ge-410-0 or Fe-310-0 complete all as specified
M&L for preparation of new surfaces of steel and iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified
Removing building materials etc.to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified
Excavation in trenches in hard/dense soil , n exc 1.5 M wide and n exc 1.5 M deep for foundation etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in Hard/dense soil all as specified and directed by Engineer-in-charge.
Excavating over areas, n exc 1.5 m deep and getting out in Hard/dense soil all as specified and directed by Engineer-in-charge.
M&L PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation and mass concrete all as specified and directed by Engineer-in-charge..
M & L 1:2:4 types B-1 (using 20 mm graded stone agg as in coping etc including necessary form work all as specified and directed by Engineer-in-charge.
Material & Labour for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in surface channels/benching of manhole, complete etc all as specified and directed.
Material & Labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/ stopped ends etc. complete etc all as specified and directed.
M&L for rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces finished even and smooth without using extra cement complete etc all as specified and directed.
Supply only Integral waterproofing compound complete etc all as specified and directed.
M&L for providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified
M&L 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete all as specified.
M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes,150 mm, dia after they are laid and tested; in PCC 1:3:6, type C2 complete all as specified and directed.
M&L 100 mm bore Reinforced concrete pipes, class NP2, laid and jointed with collars all as specified and directed by Engineer-in-charge.
M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes,100 mm, bore after they are laid and tested; in PCC 1:3:6, type C-2 complete all as specified and directed.
Cutting in to existing manhaoles for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm complete etc all as specified and directed.
Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm each complete etc all as specified and directed.
Removing excavated material to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete etc all as specified and directed.
S&F Structural steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality A, Complete all as specified and directed.
M&L polycarbonate translucent sheet of 6mm thickness of approved colour fixed to MS frames, complete all as specified and directed.
Dismantling floor hearth or wall tiling incling cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the permises (outside the complex area) all as specified and directed.
M&L of Screed bed of CM 1:6 or bedding layer of mortar 15 mm thick for laying floor finishes all as specified and directed.
S&F of light shade Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed by Engineer-in-Charge.
S&F of light shade Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a rendering of 10mm thick CM 1:4, all as specified and as directed by Engineer-in-Charge.
Surface excavation n exc 30 deep avg 15 cm getttin out hard soil/dense soil complete all as specified and directed.
M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm, deposited spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surfaces,complete all specified and directed.
M&L for 100 mm thick PCC 1:3:6 (40 mm graded aggregate) type C-2 as sub base in floor all as specified and directed.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, With grey cement with no pigment jointed and pointed in neat cement slurry in floors all as specified and directed.
M&L for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub floors etc. complete.
M&L Rendering 15mm thick cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.
Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in As in padding of roof for making slope, coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.
S&F Grating square 150mm dia of PTMT(Minimum weight 100 gms) complete all as specified and directed.
S & F 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified.
S&F Powder Coated aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. Note: Glass will be measured and paid seperately.
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified.
S&F in repairs vitreous China wash down water closet pan (Pedestal pattern - Cascade Type), white including fixing bolts, flushing cistern and flush pipe, including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc. all as specified. Make: Jaquar / Cera / Equivalent
M&L for PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in founadation of pillars and post concrete, complete all as specified and directed.
M&L Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed.
M&L for Keyed pointing to squared rubble, coursed or uncoursed stone masonry wall in cement mortar 1:3, complete all as specified and directed.
Providing and fixing in position, 150 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia zinc coated G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connected by GI wire of 3mm dia at alternate row by welding. The EPS core shall consist of 80 mm thick EPS of density not less than 16 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100KN/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge. Note-The work against this item shall be got executed through OEM or his authorised executing Agency after approval of Garrison Engineer. The contractor shall submit Test reports and manufacturers certificate for materials, concrete mix design details etc and the cost of the same shall be borne by the contractor . Make: ALPHA PEB / RAPIDCON / JSW / Sristi ventures
Providing and fixing in position, 100 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia zinc coated G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connected by GI wire of 3mm dia at alternate row by welding. The EPS core shall consist of 50 mm thick EPS of density not less than 16 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 25 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100KN/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge. Note-The work against this item shall be got executed through OEM or his authorised executing Agency after approval of Garrison Engineer. The contractor shall submit Test reports and manufacturers certificate for materials, concrete mix design details etc and the cost of the same shall be borne by the contractor . Make: ALPHA PEB / RAPIDCON / JSW / Sristi ventures
Providing and fixing in position, 80 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia zinc coated G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall and connected by GI wire of 3mm dia at alternate row by welding. The EPS core shall consist of 40 mm thick EPS of density not less than 16 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 20 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100KN/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge. Note-The work against this item shall be got executed through OEM or his authorised executing Agency after approval of Garrison Engineer. The contractor shall submit Test reports and manufacturers certificate for materials, concrete mix design details etc and the cost of the same shall be borne by the contractor . Make: ALPHA PEB / RAPIDCON / JSW / Sristi ventures
S&F Steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, Complete all as specified and directed.
M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Complete all as specified and directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specifed and directed by Engineer-in-charge.
S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specifed and directed by Engineer-in-charge.
M&L Anodised aluminium snap grid frame work for false ceiling , including Hangers of 6mm dia G.I ( upto 1200mm length adjusting level fixed to roof slab by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified .
M&L 12mm thick perforated particle board/tiles for insulation and accoustic purpose, 60x60 cm in size,fixed with screws to aluminium frame work or with staples on snap grid, complete all as specified.
M & L for preparation of old wall surfaces and applying one layer of internal wall putty, complete all as specified and as directed. (Make: Birla / JK wall putty )
M & L for two coats of oil bound distember over one coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete all as specified and as directed
M & L for two coats of plastic emulsion paint over one coat of primer on old decorated surfaces of wall including preparation of surfaces by complete removal of existing treatment etc complete all as specified and as directed (Make: Asian Royale or Equivalent)
M&L for PCC 1:3:6 type C2, 40 mm graded aggregate As in plinth protection (75 mm thick) finished even and smooth with using extra cement. Note: Joints of the plinth protection should be filled with sand and bitumen mortar and sealed with bitumen grading
M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish incl frame work for ceiling and OBD painting in celing with 2 coats of distemper over a coat of primer incl preparation of false ceiling surfaces as all directed and specified by Engr-In-Charge.
S&F factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm each Make : M/s Poly Windows, Pune / M/s Madhu Industries/ M/s Rajshri Plastiwood
S&F factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge Make : M/s Poly Windows, Pune / M/s Madhu Industries/ M/s Rajshri Plastiwood
Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Roundening to the edge of stone slabs on edge such as cooking plateform complete all as specified and directed.
S&F sinks made of stainless steel sheet l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make:- PRAYAG/BLUE STAR/NIRALI
S& F square/rectangular stainless steel wire shelving rack with 3 shelf pot (PRAYAG) Cat No-P-340 (31x24x10 inch) complete all specified. Make:- PRAYAG/BLUE STAR/NIRALI
S&F Grating doom 100mm dia of PTMT(Minimum weight 25gms) complete all as specified and directed.
Taking up or down steel tubing and connections, 15mm bore complete all as specified and directed.
S&F in repairs 32 mm dia flexible waste pipe for kitchen sink complete all as specified and directed.
M&L for 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work, all as specified and directed.
M & L for 2nd class softwood plain fillets, exc 13 & n.exc 25 sq.cm square, rectangular in section, clean sawn, secured with nails or brands, complete all as specified and directed.
S & F 75mm Butt Hinges, extruded brass with mild steel hinge pin, bright polished and fixed, Type B-12, complete all as specified and directed.
S&F 150mm extruded brass handles, fabricated type polished, complete all as specified and directed.
S&F 40mm dia, brass cupboard knobs fixed with nut, screw and washer of brass, polished, complete all as specified.
S&F Brass Locks, drawer, grade I, size 50mm, 4 levers complete all as specified.
M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point /Fan point / bell point controlled by one switch.
All as per item No.119 above, but, One 5 Amps socket point on same board with other switches
All as per item No.119 above,but, One 5 Amps socket point on independent board.
All as per item No. 119 above, but, wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .
Material and Labour for ceiling rose 3 terminals complete all as specified & directed.
Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed
S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed
S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply and fix round shape LED fitting of 12 watts surface mounted LED flat panel down light, PDC aluminum housing and PMMA diffuser makes it a robust Luminaire alongwith 12W LED lamp complete all as specified.
S&F LED light fitting of 2 feet, 10 watts with energy efficient LED and intergrated electronic driver of 10W fitting including connecting up with three core flexible copper conductor cable suitable size from ceiling rose complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 250 mm sweep complete all as specified and directed. (Make : Bajaj /CG/Philips/Havells)
Supply and fix electric water heater,storage type ABS body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Starrated complete with all accessoriessuch as safety valve, thermostate,NRV, connection piece etc.
M & L for sub main wiring complete with two runs of 2.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit/ casing caping of suitable size and accessories in concealed/surface of wall, roofs etc with one run of PVC insulated copper conductor 2.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
Supply and fixing of Endura Citylite Platinum, 45 W LED Street Light fittingpressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection incl suitable GI bracket of 32 mm dia complete all as specified and directed. (Make : Bajaj /CG/Philips/Havells)
Supply and fixing 34/36 watt LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified. (Make : Havells / CG / Bajaj)
S&F Celing Fan complete with blades , down rods ,elcetrinic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed.
M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC casing caping wiring complete with accessories/fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed by Engr -in -charge for one 5 /6 Amps socket outlet point on independent
Supply and fixing wall fan of single phase 230/240V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed . (Make : Havells / CG / Bajaj)
M & L for sub main wiring complete with two runs of 1.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC casing caping and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
Site clearance in hard/dense soil complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided.
Excavation in trenches not exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundation etc. for shafts, wells, manholes etc. n.exc 10 Sqm on plan and n.exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for 75 mm th cement concrete 1:4:8, type D-2, (40mm graded aggregate) as in sub base floors,complete all specified and directed.
M&L for 100mm th cement concrete type B-2 1:2:4, (40mm graded aggregate finished even and smooth without using extra cement as in Flooring all as specified and as directed.
M&L for PCC (1:2:4) type B2 using 40mm graded stone aggregate as in foundation filling and mass concrete,complete all specified and directed.
Removing excavation material n. exe. 50m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point
S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates,complete all specified and directed.
M & L for 8 mm thick Non asbestos fibre cement building board fixed or laid/inserted to timber / GI /Aluminium frame work with screws for indulation and accoustic purpose, 60 x 60 cm in size fixed with nails to framework or stales on snap grid complete all as specified and directed
S&F powder coated Aluminium section for door frame , windows, ventilators, with one or more rebates, including joining cleats for fixing necessary lugs complete frame work complete all as specified.
S&F powder coated Aluminium section for door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etx complete all specified and directed.
S&F powder coated Aluminium section for window and ventilator sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium shap beading screws, powder coated aluminium fittings such as peg stays 150 mm long ( 1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle 1 Nos complete all as specified
S&F powder coated Aluminium grill for window / ventilators of mesh size 75 x 75 mm and made out of 4 mm thick aluminium power coated sections including necessary fitting arrangements all as specified and directed
S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed
S & F 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement.complete all specified and directed.
S&F 100 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed
S&F aluminium butt hinges of 75 mm size medium weight fixed to existing frame complete all as specified and directed
Supply only 100 mm size extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed
S&F of 25 mm dia anodised aluminium anodised powder coated tubular curtains rod including fixing brackets complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7mm thick of size 400mX400mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:6 complete all as specified and directed.
M&L for glazed coloured wall tiles of 300X450X7mm as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10mm thick cement plaster in 1:4 as backing coat all as specified and directed.
S&F of 20 mm CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and directed
S&F of 25 mm CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and directed.
Supply only Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.
Supply only stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all specified and directed.
S&F Grating 150mmx150mm made out of stainless steel complete all as specified and directed.
Supply only PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all specified and directed.
S&F of PVC EWC anti microbial seat cover hygenic type for padestral pattern including all fitting complete all as specified and directed.
S&F of Vitreous China wash down water closet (EWC) (Anglo Indian type (pedestal pattern)white complete as fixed in repairexcluding flushing cistern and flush pipe and trap white including fixing bolts,WC seat cover of fixed with aluminium or ms chromium plated complete all as specified.
Material and Labour for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed in CM (1:1) and tested complete all as specified and directed
Cutting into existing Main Hole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete PCC (1:2:4) type B1, smooth finished and reforming benching as required internal dia of pipe 150mm.complete all specified and directed.
Supply LED PC batten light fitting of 4 feet 20 watt, with energy efficient LED and integrated electronic driver of 20W fitting including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Bajaj /CG/Philips/Havells
S & F MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCB DB SPN 4 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed.
Supply and fixing of Endura Citylite Platinum, 45 W LED Street Light fittingpressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection incl suitable GI bracket complete all as specified and directed. (Make : Bajaj /CG/Philips/Havells)
Supply & fixing GI earth wire 4.00 mm dia for interconnecting of earth electrodes all as specified.
Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified.
M&L for brick protection cover on cable with sub class 'B' brick laid dry flat adjacent to each other complete all as specified and directed.
Supply and fixing of GI tubing, light grade, 32 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. Make - TATA / JINDAL / BANSAL .
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations for electric poles, filling and mass concrete complete all as specified and directed.
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 4 core x 10 Sqmm complete all as specified and directed.
G K CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .