Loading
Loading…
Loading…
Tender ID
Tender Value
₹37.8 L
EMD Value
₹75,600
Closing Date
5 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SNT WORK
29 conditions · 23 needing a document upload
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company /Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet) above (As per GCC-2022). (AFFIDAVIT BY SOLE PROPRIETORSHIP FIRM as per Annexure-O-1 in tender document)
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the Tender Form (Second Sheet) as per GCC-2022.As per GCC- 2022. (Annexure-O-2 of tender booklet.)
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria) above as per GCC-2022. (Annexure-O-10 of tender booklet.)
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as per GCC2022. (Annexure : O-11 O-12 & O-13 of tender booklet.)
g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.as per annexure -J of tender booklet.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Each page of the tender papers will be treated as signed/accepted by the tenderer(s) or such person(s) on his/their behalf who is/are legally authorized to sign for him/them.
Any DIPP certificate submitted along with the tender document for, exemption of EMD should be valid on the date of opening of the tender, else the tender offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Declaration form regarding site etc. as per annexure -C of tender booklet.
Declaration regarding constitution of firm as per Annexure-D of tender booklet.
Engineers/Personnel as per annexure -F of tender booklet.
Performa of Completion Certificate as per annexure -L of tender booklet.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award .annexure -H
Uploading of declaration regarding Employment/Partnership etc. of Retired Railway Employees as per GCC-2022 as per annexure -Q of tender booklet.
Uploading of Tender Forms shall embody the contents of the contract documents either directly or by reference and shall be as per specimen form, Annexure-I. e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway bord letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
EI alteration and other S&T work in connection with provision for extension of A&D siding for full length shunting neck & conversion of ballast siding to full length goods line at Chirgaon station of Jhansi division.
JHS-N-GSU-02-26~NCR
JHS-N-GSU-02-26
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹75,600
5 Feb 2026
14 Jan 2026
22 Jan 2026
100 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 12,56,078.79 | ||
| — | 5.00 | — | — | ||
| Supply of phenolic laminated Sheet, resin bonded, grade P3 in standard size of 1220 X 1220 x 10 mm as per spec. No. IS 2036 of 1995 or latest. Test report of manufacture to be supplied. (Inspection Agency by consignee) | — | — | — | 28,780.7 | |
| — | 60.00 | — | — | ||
| Supply of Double Walled Corrugated (DWC) Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and Non flame propagating type in 6 meter straight length and of size 120 mm outer dia, & 103.5 mm inner dia. (Th e manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shallsubmit copy of certificate). One coupler with suitable rubber O-ring should be supplied with every 6 m o f pipe length.DWC pipe shall b e marked a t every 1 mtr length i n suc h a w a y that manufacturer's name, vendor name a n d year of manufacture can be easily identified.(Inspection Agency by consignee) | — | — | — | 39,395.4 | |
| — | 5.00 | — | — | ||
| Supply of Apparatus Case/Location Box Full a s per RDSO drg. No. RDSO/S-11500 or latest, with 'E' type lock and key ward No. 42,. Th e key and handle should be supplied at the rate of one no. per four Apparatus cases.Th e 'E' type key lock is as per RDSO Spec.No. IRS;S-30/64 or latest, RDSOdrg. No. SA 3376/M or latest and Key is as per Drg. No. 3377/M or latest.Note: This item includes the supply of 2 Nos E Type Lock fitted on both doors, along with two Keys. (Inspection Agency by consignee) | — | — | — | 1,37,561.7 | |
| — | 20.00 | — | — | ||
| Supply of stretcher bar insulation complete set consisting o f the following:- Plate-T- 10367-1 No., Bush T- 10368- 3 Nos. and washer-T- 10371 -6 Nos. (Inspection Agency by consignee) | — | — | — | 7,276.8 | |
| — | 10.00 | — | — | ||
| Supply of gauge tie plate insulation complete set each set consisting plate T-10372 = 1No., Bush T-10368=3 Nos. and washer - T-10371 = 6 Nos. (Inspection Agency by consignee) | — | — | — | 3,642.7 | |
| — | 10.00 | — | — | ||
| Supply of IRS Type point machine 'D'/'P' bracket insulation complete set consisting of the following:- Plate LH - S-3266-1 No., RH - S-3265-1 No., Plate S- 8804- 1 No., Bush - S - 3199 - 4 Nos, Bush S-8813- 2 Nos.(Inspection Agency By consignee) | — | — | — | 4,621.1 | |
| — | 5.00 | — | — | ||
| Fabrication and supply of point rodding (Ground Connection) set for electric point machine (RDSO Type) as per RDSO Drg. NosA-8800-01, 20-21, 9151- 52,9000-01, 03-04, 9065-66, 9101, as applicable.(Inspection Agency by consignee) | — | — | — | 73,855.4 | |
| — | 50.00 | — | — | ||
| Supply and fixing o f G I bend pipe 5 0 m m dia., 'B' class, f o r cable entry into Point machine with all accessories. Note: This item to b e operated independently for those points where Point machines are functional but GI bend pipe is not provided. For all other new installation of Point machines, item 06002 of the SOR includes the provision of GI bend pipe.(Inspection Agency by consignee) | — | — | — | 1,55,786.5 | |
| — | 2.00 | — | — | ||
| Supply of Track feed Battery Charger as per RDSO Specn. No. IRS: S- 89/2013 Ver.1.0 or latest. Charging capacity rating should be suitable for charging 80 AH Battery.(Inspection Agency by RDSO) | — | — | — | 11,806.5 | |
| — | 2.00 | — | — | ||
| Supply of Adjustable Track Feed Resistance 30 Ohms (Disc Type), Phenolic moulded base, as per RDSO Drg. No. SA-20161-66/M or latest. (Inspection Agency by RDSO) | — | — | — | 4,561.64 | |
| — | 4.00 | — | — | ||
| Supply of B Type Choke as per RDSO Specn.No.IRS:S-65/83 (Amnd. 3) or latest. (Inspection Agency by RDSO) | — | — | — | 23,647.28 | |
| — | 100.00 | — | — | ||
| Supply o f Channel pins, single groove, 7 m m , galvanised, suitable for 4 mm dia bonding wire for Track Circuit rail bonding, as per RDSO spec.No. IRS: S 17-75(Inspection Agency by consignee) | — | — | — | 387 | |
| — | 8.00 | — | — | ||
| Supply of Track Lead Junction Box (TLJB), 4 way, 250 mm x 255 mm x120 mm made from FRP, as per Drg.No. 20101/M(IRS) or latest, including brass bolts and hylam board sheet with terminals etc. Th e FRP material shall be as per RDSO spec.No. RDSO/SPN/151/1997 or latest. T h e technical specifications are as follows:(a) TLJB complete with cover to be in black/red/grey with all the holes required for mounting on FRP stump (vertical two for each FRP angle) HDPE pipe, cable etc.(b) Each TLJB shall have two bakellite terminal block fitted horizontally, each bakellite terminal block shall have two nickel chrome plate with brass terminal. Alongwith each TLJB, nickel chrome plated brass links(two nos. of adequatestrength for vertical linking of the terminals to be supplied.(c) HDPE pipe along with two nuts for fixing on the TLJB hole.(d) The FRP stump for mounting the TLJB. (Inspection Agency by consignee) | — | — | — | 42,718.56 | |
| — | 3.00 | — | — | ||
| Supply of Key Lock Checking Relay (KLCR) working on 24V DC, AC Immunized, metal to metal, with different ward combinations and contact configuration 4F/4B with 2 extra ward plates, RDSO spec No. RDSO/SPN/219/2016 Ver 1.0 with Amendment-1 or latest.(Inspection Agency by RDSO) | — | — | — | 24,080.52 | |
| — | 1.00 | — | — | ||
| Supply and installation of prewired KLCR Box, wooden crank handle lock inside box, with 8 way terminal strips, LEDs of approved type, for fixing of EKT on wooden board inside box form installating KLCRs/EKTs up to 06 No., including supply of all material like board, handle, hinges, glass sheet etc.(Inspection Agency by consignee) | — | — | — | 13,636.52 | |
| — | 6.00 | — | — | ||
| Supply of uncharged Low Maintenance Lead Acid (LMLA) secondary cell, 2V, 80 AH, in dry condition, shelf mounting type, conforming to RDSO Specn. No. IRS:S-88/2004 o r latest, with inter cell connectors, nuts and bolts, washers, microporous vent plug, float etc.(Inspection Agency by RDSO) | — | — | — | 18,670.5 | |
| — | 5.00 | — | — | ||
| Supply of Electric Point Machine 143 mm stroke, AC Immunity 160V AC, complete with lock detector and slides for lock detector, non-trailable, to operate on 110V DC, rotary locking with crank handle universal type as per RDSO Spec. No. IRS:S-24/2002 (Amnd. 1) or latest, RDSO DRG. No. S-10800 (ALT.5 WITH JUNCTION BOX TELESCOPIC. THE MOTOR WILL BE AS PER RDSO SPECN. No. IRS: S- 37/82 (AMND. 3) WITH RDSO DRG. No. S-10910. This includes supply of Set of tools as per para 20.1 & 20.2 of RDSO SPECN. No. IRS:S-24/2002 (AMND 1)The following set of tools in a suitable tool box shall be supplied along with every set of eight point machines or less.i). Hand operated square drive socket wrenches of 12.5 mm driving square(short type) as per IS: 7381 for M8, M10, M12 & M18 threads.(One 250 mm long 12.5 mm square extension bar as per IS: 7991 along with compatible Tee handle Square drive as per IS: 7975 suitable for above socket wrenches shall also be provided.)ii). Open jaw wrenches (spanners) for M10, M12, M20, M24 & M33 threads a s per IS: 2028.iii). Adjustable wrench.iv). Screw driver 3 0 0 m m long. Junction b o x a n d t w o numbers of telescopic pipes o f approved type shall be supplied as an integral part of the point machine. (Inspection Agency by RDSO) | — | — | — | 5,02,241.25 | |
| — | 5.00 | — | — | ||
| Supply and fixing of RCC cable route marker, made with concrete in the ratio 1:3:6, engraved "NCR" "S&T" on top portion and painted on both sides, along the route at every 50 meter and at route diversion. Th e cable marker is to be fabricated as per RDSO drawing No. SDO/cable laying/020, issued vide RDSOdocument No. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014, or latest. Th e fixing work is to be done as per extant practice of NC Railway and as per Railway site supervisor incharge.(Inspection Agency by consignee) | — | — | — | 2,145.3 | |
| — | 5.00 | — | — | ||
| Supply and installation of earth electrode a s per standard practice and as per NCR Drawing No. S&T/CONST/6.4/97. It includes supply of GI pipe of 3 meter length. I t includes connecting the earth electrode to the equipments which are required to be earthed including digging of earth pit 3 meter deep and fixing earth electrode pipe, casting of cement concrete enclosure with cover (cover as per drawing No. S&T/CONST /6.3/97. It includes installation of 7 strand GI wires as earth lead wires, supported on MS fl at size 5mm x 40 mm, soldering and nut bolt both, one end of both earth lead wire and MS fl at to earth electrode and other end to Location boxes, block equipments, power equipments, cable sheath, signals etc. as p e r site requirement a n d a s per instructions given by engineer incharge. (Inspection Agency by consignee) | — | — | — | 17,254.8 | |
| — | 30.00 | — | — | ||
| Supply of Medium class GI pipes 100 mm dia (4.5 mm thickness) with thread collars as per IS 1239 (Part 1) 2004 or latest with coupling on culverts/bridges, perforated at a distance of 20 cm or less with 10 mm dia hole, or at any other locations as decided by Site Engineer. It includes supply of all material required forfixing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends.(Inspection Agency by consignee) | — | — | — | 29,752.8 | |
| — | 200.00 | — | — | ||
| "Supply o f 1 x 1 6 Sqmm (Red/Black/Green) multi strand copper power wire as per IS: 2465/1984 and IS:694:2010 or latest, 101 conductor each dia 0.45+/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 1.127 ohms/km and test parameters as per RDSO Specn.No.IRS:S- 76/89(Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge."(Inspection Agency By consignee) | — | — | — | 29,554 | |
| — | 1.00 | — | — | ||
| Supply of Position Light Shunt Signal Unit Complete, Non-Metallic, made of FRP as per Drg. No. SA-23840 (Adv.) suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item) (Inspection Agency By consignee) | — | — | — | 14,796.92 | |
| — | 5.00 | — | — | ||
| Q-Series Line Relay (QNA1 Type), A C immunized, 12F/4B, 2 4 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A a n d RDSO Specn.No.IRS:S@ 45"44@ S-23, S-60 or latest, as applicable. The interlocking code for this unit shall be "ABDFH".(Inspection Agency By RDSO) | — | — | — | 19,633.9 | |
| — | 6.00 | — | — | ||
| Supply of Track Relay QBAT, AC immunized, 2F-2B contacts, 9 ohms.Complete with plug board, retaining clip& connectors a s perRDSO/SPN/84 Ver2.0 o r latest. The interlocking code forthis unit shall be ""ABEJX"".(Inspection Agency By RDSO) | — | — | — | 42,480 | |
| — | 100.00 | — | — | ||
| "Supply of power cable 3 core, 2.5 sq mm, multi strand (36/0.3 mm dia) cable as per IS 694:1990 reaffirmed 1995 o r latest suitable for Railway electrification area, shall be of reputed make like Havells, Delton, LAPP, Finolex, or superior.(Inspection agency - Consignee)" | — | — | — | 7,791 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .