S/R to MDR-68 to Laxmiprasad road such as pothole repair and SDBC, CC overlaying with paver block, retaing wall and Drain for the year 2025-26

Clearing grasses and removal of rubbish upto a distance of 50mtr outside the periphery of the area including cost of all labour, T&P articles required for the work complete as per specification and direction by the Engineer-in-Charge. (By manual means).

Scraping, cleaning the road surface applying tack coat using 3.0 kg of bitumen for 10 sqm and laying 37.5mm thick built up spray grouting in one layer using 0.45 cum of 25mm to 40mm size crusher broken hard granite material and 12.00 Kg penetration grade of bitumen for 10 sqm with 0.12cum of 12mm size hard granite crusher broken chips as key stone for 10sqm, spreading over and laying including heating, pouring and spreading over and spreading bitumen, metal and chips and rolling with PRR including hire and running charges of PRR and all other machinaries including cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Providing and applying tack coat using bitumen of VG-30 Grade using bitumen pressure distributor at the rate of 0.20kg/sqm area on the prepared bituminous/granular surface, cleaned with mechanical broom as per Technical Specification Clause 503 of MoRD & MoSRT&H for road & bridge works including cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification & direction of the Engineer-in-Charge.

Providing and laying Semi Dense Bituminous Concrete with batch type hot mix plant using crushed aggregates of specified grading-II (i.e.10mm nominal size) premixed with bituminious binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clauses 508 of MoSRT&H specification for road & Bridges work including cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Providing, laying & spreading of moorum in both side shoulder of road embankment to the required thickness including watering & ramming with cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and cost of labour, T&P etc. required for the work complete in all respect as per specification & direction of the Engineer-in-charge.

Earth work in excavation of foundation in all kinds of soil in the structures upto 3m depth as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials, dressing of sides and bottom and backfilling with approved materials including cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Providing and filling in foundation and plinth with sand including watering & ramming with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and cost of labour, T&P, etc. required for the work complete as per specification & direction of the Engineer-in-charge.

Providing and laying of cement concrete of prop. (1:3:6) using 4cm size black hard granite crusher broken stone aggregate including watering, curing and ramming with cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge.

Cutting, straightening coiled or bent up M.S. rods, HYSD steel or Tor Steel of grade Fe-500-D confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading of M.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work including cost of all materials, labour charges, sundries, T&P etc. and scaffolding complete in all respect as per specification and direction of the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod or HYSD steel or Tor steel & binding work consumed in the work)

Filling in foundation and plinth with excavated materials including cost of labour, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

PCC M-15 (Nominal Mix 1:2.5:5) using 40mm & downgraded size stone agreegate in Foundation including watering, curing,ramming with centering & shuttering including cost, conveyance, royalty of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

Supplying and laying heavy duty factory made interlocking approved brand paver block of 80mm thick coral shaped on preparation of subbase with 30mm sand and levelling laying interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges inclding cost, conveyance taxed of all materials, labour charges, T&P etc.required for the work.complete as per specification and direction of the Engineer-in-charge.